Norgren L07 Datasheet

See Section ALE-24 for Accessories

Littleton, CO USA Phone [phone] www.norgren.com

L07

● Compact design

● Provides air line lubrication to one or more air driven

tools or other devices

● Nearly constant oil density output with varying air

flow

● All around (360°) visibility of the sight-feed dome

simplifies installation and adjustment

● Screw-on bowl reduces maintenance time

● Can be disassembled without the use of tools or

removal from the air line

Miniature Series 07 Micro-Fog

Lubricator 1/8" and 1/4" Port Sizes

ALE-13-2

ISO Symbols

No drain Manual drain

Port Size Model Numbers Flow scfm (dm3/s)* Weight lbs (kg)
1/8" L07-100-MPAA 10 (5.0 dm3/s) 0.28 (0.13)
1/4" L07-200-MPAA 14 (6.7 dm3/s) 0.28 (0.13)

Ordering Information. Models listed include PTF threads and transparent bowl with manual drain.

* Approximate flow at 90 psig (6.3 bar) inlet pressure and 7 psig (0.5 bar) pressure drop.

Alternative Models

Port Size Substitute
1/8" 1
1/4" 2

Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G

Option Substitute
Not applicable 0

Bowl and Drain Substitute
Transparent without drain Q
Metal with drain M
Transparent with drain A

Option Substitute
Not applicable 0

Flow Substitute

Unidirection P
Lubricator Type Substitute

Micro-Fog M

-

★PM★★

★

-

0★L 7

L07 Lubricators

Littleton, CO USA Phone [phone] www.norgren.com

ALE-13-3

All Dimensions in Inches (mm)

Technical Data

Fluid: Compressed air
Maximum pressure

Transparent bowl:150 psig (10 bar)
Metal bowl: 250 psig (17 bar)

Operating temperature*

Transparent bowl:0° to 125°F (-20° to 50°C)
Metal bowl: 0° to 175°F (-20° to 80°C)

* Air supply must be dry enough to avoid ice formation at temperatures below

35°F (2°C)

Start point (i.e. minimum flow required for lubricator operation):0.5 scfm

(0.24 dm3/s) at 90 psig (6.3 bar) inlet pressure

Typical flow at 90 psig (6.3 bar) inlet pressure at 7 psig (0.5 bar) pressure drop:

1/8" ports: 10 scfm (5 dm

3

/s)

1/4" ports: 14 scfm (6.7 dm3/s)
Nominal bowl size: 1 fluid ounce (31 ml)
Drain connection:Will fit 1/8-27 and 1/8-28 pipe thread
Recommended lubricants: See Section ALE-29.
Materials

Body: Zinc

Bowl

Transparent: Polycarbonate

Metal: Zinc
Sight-feed dome:Transparent nylon
Elastomers: Neoprene & nitrile

Typical Performance Characteristics

1.63 (41)

1.45 (37)

7.21 (183)†

0.38 (10)

1.65 (42)

4.72 (120)

Manua Drai

Without Drai

7.60 (193)†

0.38 (10)

1.65 (42)

5.12 (130)

† Minimum clearance to remove bowl.

Service Kits

Item Type Part number
Service kit Seal and o-ring 3795-03
Replacement drain Manual 773-03

Service kit includes o-ring, seal, and bowl o-ring.

Panel mounting hole diameter: 1.9" (30 mm)
Maximum panel thickness:0.25” (6 mm)

PORT SIZE: 1/4"

psid

bar d

0.8

10

0.6
8

6

0.4

PRESSURE DROOP

4

0.2
2

0

0

0 4 8 12 16 20 24 scfm
0 2 4 6 8 10 dm3/s

FLOW CHARACTERISTICS

INLET PRESSURE: psig (bar g)

36

23

(1.6)

(2.5)

AIR FLOW

58

(4.0)

91

(6.3)

116

150
(10)

(8)

n

n