Norgren KIP LS11 User Manual

KIP LS 11 Series

LS 11 Plastic Sidemount

Direct side mounted level controls in Polypropylene and PBT
All polypropylene construction offers broad
fluid compatibility
Single unit offers normally open or normally closed operation
Mounting available internally or direct
external entry

Normally Open Dry Condition:

Float rises with liquid level to stop, where upon switch closes.

Normally Closed Dry Condition:

Float falls with liquid level to stop, where upon
switch closes.

Actuation point is 15° +10° of float arc.

Specifications

Maximum Pressure 100 PSI (6.9 bar) @ 70°F
Temp. Operating Range -40°F to 150°F (-40° to 66°C)

Polypro

-40°F to 225°F (-40° to 107°C) PBT
Leads 22 AWG, 24” long
Recommended Minimum
Liquid SP GR .65

5/8-11 UNC

1.90 (48)

LS 11 Ordering Numbers:

Part Number Mounting Material Switch Rating

† “NSF Certified” - these products conform to the requirements of NSF Criteria

- for NSF label add prefix N to the part number when calling

†

1870-024

1871-024 1/2” NPT PBT 20VA

†

1872-024

1873-024 5/8-11 UNC PBT 20VA

1/2” NPT Polypro 20VA

5/8-11 UNC Polypro 20VA

C2 - Special and/or Devices.

2.37 (60)

1.00 (25) 2.87 (73)

4.03 (102)

1/2" NPT

2.37 (60)

2.87 (73)

4.00 (102)

All Dimensions in Inches (mm)

.68 (17)

1.90 (48)

.68 (17)

8

For additional information call: 1 800 722 5547