5/2 and 5/3 solenoid and air pilot actuated valves
NITUFF® coated non-corrosive spool and sleeve
for long trouble free life (100 million plus cycles)
Integral flow controls for cylinder speed control on
size #1, and #2 models
Low power solenoids with manual override options
End and CNOMO solenoid pilots
Base mounted soft start valves available
Minimal maintenance
Technical Data
Medium:
Compressed air, 40µm filtered, lubricated or nonlubricated
Operation:
Glandless spool valve, solenoid pilot or air pilot
actuated
Mounting:
On sub-bases
Sizes:
#1, #2, #3
Ordering Information
To order select model number, add voltage code and connector code, e.g. SXE
0573-A60-00/13JB for a 5/2 double end solenoid pilot size #1 valve with internal
pilot air supply, integral flow regulators, shrouded push button lockable manual
override, 22 mm coil 24V d.c. with cable grip connector.
5/2
Operating Pressure:
Maximum pressure
145 psig (10 bar) solenoid pilot actuated valves with
internal pilot supply
232 psig (16 bar) solenoid pilot actuated valves with
external pilot supply
232 psig (16 bar) air pilot actuated valves
Flow Characteristics (unregulated):
SizeCvl/min
#1 1.25.5
#2 2.410.7
#3 4.417.9
Ambient Temperature:
5°F* to 122°F (–15°C to 50°C) solenoid pilot actuated
valves
5°F* to 176°F (–15°C to 80°C) air pilot actuated valves
*Consult our Technical Service for use below 36°F (2°C)
Materials:
Die cast aluminum body. Hard anodized, Teflon coated,
matched aluminum spool and sleeve. Viton and nitrile
rubber seals. Zinc die cast locking plate. POM plastic
parts. Zinc plated screws. Brass flow regulators.
5/3
All ports blocked mid position
5/3
Center open exhaust mid position
5/3
Center open pressure mid position
VAL-146
www.norgren.com/usa
Page 2
ISO Star Series Valves
5/2 and 5/3 solenoid and air pilot actuated valves
5/2 Solenoid Pilot Actuated Valves
ModelSizeFlow Pilot OperatorReturnOperating PressurePilot PressureWeight
* Valve Function Designations:APB = All Ports Blocked
COE = Center Open Exhaust
COP = Center Open Pressure
Part Number Example
SXE9573-Z70-0012JA
Where “12J” is a 12V d.c. coil with a 22 mm connector interface, and “A” is a solenoid without connector.
Voltage Codes and Replacement Coils
Voltage22 mm Coil 30 mm Coil
with connector interface with connector interface
acc. to Industrial Standardacc. to DIN 43650 table "A"
Code Power Inrush/Hold Coil Part.-no. CodePower Inrush/Hold Coil Part.-no.
12 V d.c.12J2 W54469-0122N1.5 WV10633-A22N
24 V d.c.13J2 W54469-0223N1.5 WV10633-A23N
24 V 50/60 Hz14J4/2.5 VA54469-0424N3/2 VAV10633-A24N
48 V 50/60 Hz16J4/2.5 VA54469-0726N3/2 VAV10633-A26N
110/120 V 50/60 Hz18J4/2.5 VA54469-0328N3/2 VAV10633-A28N
220/240 V 50/60 Hz19J9/5.0 VA54469-0889N10/8VAV10633-A89N
Other Voltages available on request.
VAL-147
Page 3
Valves
ISO Star Series Valves
5/2 and 5/3 solenoid and air pilot actuated valves
***Insert 3-digit voltage code from Voltage Codes and Replacement Coils.
† Insert letter from Connector Option Codes.
ControlFunction*psig (bar)psig (bar)lb. (kg)
* Valve Function Designations: APB = All Ports Blocked
COE = Center Open Exhaust
COP = Center Open Pressure
Part Number Example
SXE9573-Z70-0012JA
Where “12J” is a 12V d.c. coil with a 22 mm connector interface, and “A” is a solenoid without connector.
Voltage Codes and Replacement Coils
Voltage22 mm Coil 30 mm Coil
12 V d.c.12J2 W54469-0122N1.5 WV10633-A22N
24 V d.c.13J2 W54469-0223N1.5 WV10633-A23N
24 V 50/60 Hz14J4/2.5 VA54469-0424N3/2 VAV10633-A24N
48 V 50/60 Hz16J4/2.5 VA54469-0726N3/2 VAV10633-A26N
110/120 V 50/60 Hz18J4/2.5 VA54469-0328N3/2 VAV10633-A28N
220/240 V 50/60 Hz19J9/5.0 VA54469-0889N10/8VAV10633-A89N
Other Voltages available on request.
with connector interface with connector interface
acc. to Industrial Standardacc. to DIN 43650 table "A"
Code Power Inrush/Hold Coil Part.-no. CodePower Inrush/Hold Coil Part.-no.
VAL-148
www.norgren.com/usa
Page 4
ISO Star Series Valves
5/2 and 5/3 solenoid and air pilot actuated valves
Part Number Example
SXE9573-Z70-0012JA
Where “12J” is a 12V d.c. coil with a 22 mm connector interface, and “A” is a solenoid without connector.
Voltage Codes and Replacement Coils
Voltage22 mm Coil 30 mm Coil
12 V d.c.12J2 W54469-0122N1.5 WV10633-A22N
24 V d.c.13J2 W54469-0223N1.5 WV10633-A23N
24 V 50/60 Hz14J4/2.5 VA54469-0424N3/2 VAV10633-A24N
48 V 50/60 Hz16J4/2.5 VA54469-0726N3/2 VAV10633-A26N
110/120 V 50/60 Hz18J4/2.5 VA54469-0328N3/2 VAV10633-A28N
220/240 V 50/60 Hz19J9/5.0 VA54469-0889N10/8VAV10633-A89N
Other Voltages available on request.
Connector option codes and replacement connectors
Connector Option Codes22 mm coil30 mm coil
Industrial standardDIN 43650 table “A”
A = Solenoid without connector
B = Cable grip54934-0154933-05
C = 6 ft. molded cable, 0-240V a.c./V d.c.54934-2154933-06
5 = 6 ft. molded cable with indicator light surge suppression, 24V a.c./V d.c.54934-3054933-09
6 = 6 ft. molded cable with indicator light, 110V/50 Hz - 120V/60 Hz54934-35M/P43316/23
Other Connectors available on request.
with connector interface with connector interface
acc. to Industrial Standardacc. to DIN 43650 table "A"
Code Power Inrush/Hold Coil Part.-no. CodePower Inrush/Hold Coil Part.-no.
1-side and bottom ported 2-both ends ported 3-one end ported
VDMA 24 345 Base Range
VDMA 24 345Form ‘A’Form ‘C’Form ‘D’
Single Station Sub-base Modular Sub-baseModular Sub-base Transition plateBlanking disk *
Side PortedBottom PortedEnd Plates (2)(dual supply)
3102-75-B (3/4") 3
NPT #1 models (1/4)C/P19126239-238B 239-289B CQM/22152/3/24 #1’#2239-251
NPT #2 models (3/8)C/P19132239-242B 239-291B CQM/22253/3/24 #2’#3239-252
NPT #3 models (1/2)C/P19138239-246B 239-293B CQM/22354/3/24 #3’#4239-253
ISO G #1 modelsM/P19126CQM/22152/3/21CQM/22152/3/22CQM/22152/3/24 #1’#2FP8382
ISO G #2 modelsM/P19132CQM/22253/3/21CQM/22253/3/22CQM/22253/3/24 #2’#3FP8482
ISO G #3 modelsM/P19138CQM/22354/3/21CQM/22354/3/22CQM/22354/3/24 #3’#4FP8582
* Only suitable for specific base range.
Universal Base Range
Modular Sub-baseTransition PlateBlanking Disk**Side End PlateSingle End Plate
Side and bottom ported(dual supply)All Ports ClosedEnd Ports Open
ISO #1 models (G1/4) CQM/22152/3/27CQM/22152/3/29#1’2 M/P43173CQM/22152/3/28CQM/22152/3/31
ISO #2 models (G3/8)CQM/22253/3/27M/P43174CQM/22253/3/28CQM/22253/3/31
** Universal base range only.
Accessories
Single
Pressure Regulator Pressure RegulatorBlanking PlateSandwich Flow
port 1 regulatedports 2 & 4 regulatedControl
5-Port/2-position5
5-Port/3-position, spring centered, all ports blocked6
5-Port/3-position, spring centered, cylinder ports
open to exhaust7
5-Port/3-position, spring centered, cylinder ports
open to pressure8
Mounting TypeSubstitute
ISO Star Series7
SizeSubstitute
Size 13
Size 24
Size 35
Solenoid TypeSubstitute
Standard solenoid pilot operatorA
CNOMO solenoid pilot operatorZ
Valve Body Options
CoilsSpeed ControlSubstitute
double solenoidno5
double solenoidyes6
single solenoidno7
single solenoidyes8
ISO Star Series Valves
5/2 and 5/3 solenoid and air pilot actuated valves
SXE 9574 – A70 – 0018 J B
ConnectorSubstitute
No electrical connectorA
Cable gripB
6 ft molded cable, 0-240 V a.c./V d.c.C
6 ft molded cable, w/indicator light, surge suppression, 24V a.c./V d.c. 5
6 ft molded cable, 110-120 V a.c./V d.c.6
Air pilot operatedLeft Blank
Connector InterfaceSubstitute
22 mm coil with connector interface according
to Industrial StandardJ
22 mm coil with connector interface according
to DIN 43650 table “B”L
30 mm coil with connector interface according
to DIN 43650 table “A”N
No coil or air pilot operatedBlank
Solenoid VoltageSubstitute
12V d.c.2
24V d.c.3
24V 50/60 Hz4
48V 50/60 Hz6
110/120V 50/60 Hz8
220/240V 50/60 Hz9
No coil or air pilot operatedBlank