Norgren F39 User Manual
See Section ALE-24 for Accessories
Littleton, CO USA Phone 303-794-2611 www.norgren.com
F39
● Compact design
● High efficiency oil and particle removal
● Screw-on bowl reduces maintenance time
● Can be disassembled without the use of tools or
removal from the air line
Miniature Series 07 Oil Removal
(Coalescing) Filter 1/8" and 1/4" Port Sizes
ALE-2-2
Saturated Flow* Dry Flow
Port Size Model Numbers Flow scfm (dm3/s) Flow scfm (dm3/s) Weight lbs (kg)
1/8" F39-100-A0TA 6.0 (2.8) 11.2 (5.3) 0.28 (0.13)
1/4" F39-200-A0TA 6.4 (3.0) 12.2 (5.8) 0.28 (0.13)
Ordering Information. Models listed include PTF threads, automatic drain and transparent bowl.
* Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal performance.
Alternative Models
Port Size Substitute
1/8" 1
1/4" 2
Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G
Option Substitute
Not applicable 0
Bowl Substitute
Transparent T
Metal M
Option Substitute
Not applicable 0
Element Substitute
Coalescing 0
Drain Substitute
Automatic A
Manual M
-
★★★ ★★
★
-
3★F 9
Automatic and
Semi Automatic Drain
Manual Drain
ISO Symbols
F39 Oil Removal (Coalescing) Filters
Littleton, CO USA Phone 303-794-2611 www.norgren.com
ALE-2-3
Technical Data
Fluid: Compressed air
Maximum pressure:
Transparent bowl:150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature:*
Transparent bowl:-30° to 125°F (-34° to 50°C)
Metal bowl: -30° to 150°F (-34° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below
2°C (35°F)
Particle removal: Down to 0.01 µm
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil content of air leaving the filter: 0.01ppm at 70°F (21°C)
with an inlet oil concentration of 17 ppm.
Maximum flow with 90 psig (6.3 bar) inlet pressure†:
1/8 ports, 6.0 scfm (2.8 dm
3
/s)
1/4 ports, 6.4 scfm (3 dm3/s)
† Maximum flow to maintain stated oil removal performance.
Nominal bowl size: 1 fluid ounce (31 ml)
Drain connection: 1/8" pipe thread
Automatic drain operation:Spitter type drain operates momentarily when a rapid
change in air flow occurs or when the supply pressure is reduced.
Materials:
Body: Zinc
Bowl:
Transparent: Polycarbonate
Metal: Zinc
Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene & nitrile
0.157 (4) Dia **
0.5 (13) Deep **
n
n
1.45 (37)
0.91
(23)
0.73
(19)
0.91
(23)
6.07 (154) †
0.38 (10)
4.10 (104)
6.22 (158) †
0.38 (10)
4.25 (108)
1.63 (42)
** Mounting holes
† Minimum clearance to remove bowl
Service Kits
Item Type Part number
Service kit All models 4141-10
Replacement drains
Manual 773-03
Automatic 3654-02
Service kit includes element, element o-ring, and bowl o-ring.
Typical Performance Characteristics
All Dimensions in Inches (mm)
PORT SIZE: 1/4"
psid
bar d
ELEMENT: SATURATED
0.8
10
0.6
8
6
0.4
PRESSURE DROP
4
0.2
2
0
0
0 2 4 6 8 10 scfm
0 1 2 3 4 5 dm3/s
PORT SIZE: 1/4"
psid
bar d
ELEMENT: DRY
0.8
10
0.6
8
6
0.4
PRESSURE DROP
4
0.2
2
FLOW CHARACTERISTICS
INLET PRESSURE: psig (bar)
36
23
(1.6)
FLOW CHARACTERISTICS
23
(1.6)
58
(2.5)
(4.0)
AIR FLOW
INLET PRESSURE: psig (bar)
36
(2.5)
58
(4.0)
91
(6.3)
91
116
(6.3)
(8)
Maximum flow to
maintain stated oil
removal performance
150
116
(10)
(8)
150
(10)
180
(12)
180
(12)
0
0
0 4 8 12 16 20 scfm
0 2 4 6 8 10 dm3/s
AIR FLOW
Manual Drai
Automatic Drai
Loading...