Norgren F22 Datasheet

See Section ALE-24 for Accessories

ALE-16-2

Littleton, CO USA Phone [phone] www.norgren.com

F22

● Designed for use in corrosive environments

● Metallic parts meet NACE

†

Standard MR-01-75

*

● Provides effective liquid removal and positive solid

filtration

● Large filter element area for minimum pressure drop

● Automatic Drain is operated by liquid level and also

opens upon depressurization

● Meets certain requirements of Military

Specifications**

* National Association of Corrosion Engineers (NACE) MR-01-75 defines requirements for
sulphide stress cracking resistant materials used in well-head and other corrosive environments.

** Meets certain requirements of MIL-S-901C (Navy) 15 Jan 1963: Military Specifications Shock
Test H.I.(High Impact);Shipboard Machinery, Equipment and Systems and MIL-STD-167-1
(Ships) Military Standard Mechanical Vibrations of Shipboard Equipment.

Stainless Steel Filter

1/2 PTF

ISO Symbols

Automatic Drain Manual Drain

Alternative Models

Port Size Substitute
1/2" 4
Special 6**

Modification Substitute
1/8" thread auto-drain fitting 0
1/4" thread auto-drain fitting 5
Special 7**

Port Size Model Number Flow† scfm (dm3/s) Weight lbs (kg)
1/2 PTF F22-405-A2DA 98 (46) 4.18 (1.88)

Ordering Information. Model listed has PTF threads, automatic drain and 25 µm element.

Thread Substitute
PTF A
ISO G D
Special S**

22F

★0★ ★ ★D★

--

Element Substitute
5 µm 1
25 µm 2

Drain Substitute
Automatic A
Manual M

** 3/4" body (3/4 x 16 UNF) F22-6X7-XXXS
Please contact our technical service for details of non standard models.

† Typical flow with 25 µm element at 90 psig (6.3 bar) inlet pressure, and 5 psig (0.35 bar) pressure drop.

ALE-16-3

All Dimensions in Inches (mm)

Littleton, CO USA Phone [phone] www.norgren.com

F22 Stainless Steel Filters

Technical Data

Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature: 0° to 175°F (-20° to 80°C) *

* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).

Particle removal:

25 µm standard

5 µm optional
Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)
Typical flow with 25 µm element at 90 psig (6.3 bar) inlet pressure, and 5 psig

(0.35 bar) pressure droop: 98 scfm (46 dm

3

/s)
Automatic drain connection:Will fit 1/8-27 and 1/8-28 pipe thread
Automatic drain operating conditions (float operated):

Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm

3

/s)

Manual operation: Depress pin inside drain outlet to drain bowl
Nominal bowl size: 8 fluid ounce (0.24 liter)
Materials

Body: Stainless steel
Bowl: Stainless steel
Element: Sintered stainless steel
Elastomers: Synthetic rubber

PRESSURE DROP

0.6

0.4

0.2

0

bar d

10

8

6

4

2

0

psid

PORT SIZE: 1/2"
ELEMENT: 25 µm

2.5

(36)

4.0

(58)

10.0

(150)

6.3

(90)

8.0

(116)

INLET PRESSURE: psig (bar g)

0 20 40 60 80 100 dm3/s

AIR FLOW

0 40 80 120 160 200 scfm

FLOW CHARACTERISTICS

Typical Performance Characteristics

Service Kits

Item Type Part number

25 µm, automatic drain F22-100A
5 µm, automatic drain F22-100A(5)

Service kits

25 µm, manual drain F22-100M
5 µm, manual drain F22-100M(5)

Replacement drains Automatic 3000-87

Manual 2273-18

Service kit Orientable metal bowl 5860-RK

Service kits include o-rings, gaskets, specified filter elements, drain
strainer and strainer cap.

3.90 (99)

∅1.50 (76)

1.14 (38)

9.13 (232)**

Automatic Drain

**Minimum clearance required to remove bowl

0.67 (17)

1.34 (34)

6.77 (172)

8.58 (218)**

Manual Drain

0.67 (17)

6.22 (158)