Norgren Air Solenoid Accessory Pack User Manual

Robust modular 3-way valve manifolding system

Patented design provides flexibility to exceed your
application needs

Customizable electrical connection to meet your
specific requirements

Integrated fittings provide faster build times

Quicker installation with color coded fittings caps

Simple to connect design for building the manifold
length you require

Mountable in any orientation

Technical Data

Medium:

Compressed air, filtered, lubricated, non-lubricated

Operation:

3/2 normally closed direct acting

Solenoid:

9 - 16 VDC or 20.4 - 26.4 VDC
7 Watts

Port Size:

3/8" Inlet - tube/push in fitting (PIF)
1/4" Outlet/Delivery - tube/push in fitting (PIF)

Operation Pressure:

Maximum 150 psig (10.35 bar)

Flow Characteristics:

3/8" Inlet Cv = 0.67
1/4" Delivery Cv = 0.14
Minimum orifice size: 0.078"

Temperature Range:

-40° to 220°F (-40° to 100°C)

Materials of Construction

Body and endcaps: 30% glass filled PBT
Exhaust cover cap: 30% glass filled Nylon 6/6
Coil overmold: 15% glass filled PET
Seals: Silicone, Nitrile, Viton, and HNBR
Springs, armature, and pole piece: Stainless Steel
Bobbin: 30% glass filled PPS
Valve and fittings: Brass
Mounting sleeve: Steel
Tubing: Tubing should be to SAE J844

Air Solenoid Accessory Pack

3/2 valve with 3/8" inlet to 1/4" outlet

Typical applications

Commercial vehicles, truck and trailer
manufacturers, body builders:

Air horn
Inter wheel lock
Power take off (PTO)
Inner axle lock
5th wheel slide
Suspension dump
Inside/outside air
5th wheel release
Auxiliary axle

Options

Consult factory for variations, electrical and
wiring options.

Standards and Legislation

Fittings comply with U.S. Department of Transportation, Federal
Motor Vehicle Safety Standard (DOT FMVSS 106) (Mandatory
requirements for inch tube fittings in U.S.A.), Society of Automotive
Engineers SAE J1409, SAE J1410, SAE J1455 and SAE J2494-2.

6/11

Our policy is one of continued research and development. We therefore reserve the right

to amend, without notice, the specifications given in this document.

Symbol

N/US 5.4.405.01

Air Solenoid Accessory Pack

n

t

e

n
A
A

n

n

e

r

n
B
C

Dimensions in Inch (mm)

Valves

CCooddeePPaarrtt NNuummbbeerrFFuunnccttiioon

A
A

End Plates

CCoodde

B
C

Configurable up to 8 stations,(B+A+A+A+A+A+A+A+A+C).
Please consult factory for configurations using more than 8 stations.

7201-70 3/2 NC 19" flying leads (1/4" PIF) 12Vdc
7239-58 3/2 NC 19" flying leads (1/4" PIF) 24Vdc

PPaarrtt nnuummbbeer

7202-70 Inlet Left Hand End Plate (3/8" PIF)
7203-70 Cap Right Hand End Plate

DDeessccrriippttiioon

EElleeccttrriiccaall
CCoonnnneeccttiioon

PPoorrt
SSiizzee

VVoollttaagge

B A A A C

Colored Caps

PPaarrtt NNuummbbeerrDDeessccrriippttiioon

48C34901 1/4" Red
48C34902 1/4" Yellow
48C34903 1/4" Orange
48C34904 1/4" Green
48C34905 1/4" Black

PPaarrtt NNuummbbeerrDDeessccrriippttiioon

48C34906 1/4" Tan
48C34907 1/4" Violet
48C34908 1/4" Blue
48C34909 1/4" White
48C34910 1/4" Silver

Custom Configurations

Custom configurations include the following:

! Voltage
! Electrical connection and fittings

6/11

Contact Norgren for more information and additional options at: 303.794.2611

Our policy is one of continued research and development. We therefore reserve the right

to amend, without notice, the specifications given in this document.

N/US 5.4.405.02