Nordmende CSG50WH, CSG60WH User Manual [de]

CSG50WH CSG60WH

OPERATING AND INSTALLATION

INSTRUCTIONS OF

FREESTANDING GAS COOKER

Dear Customer,

Our goal is to offer you products with high quality that exceed your expectations. Your appliance is produced in modern facilities carefully and particularly tested for quality.

This manual is prepared in order to help you use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency.

Before using your appliance, carefully read this guide that includes the basic information for right and safe installation, maintenance and use. Please contact to the nearest Authorized Service for the installation of your product.

CE Declaration of conformity

This appliance has been designed to be used only for home cooking. Any other use (such as heating a room) is improper and dangerous.

This appliance has been designed, constructed, and marketed incompliance with:

• Safety requirements of the "Gas" Directive 2009/142/EC;

• Safety requirements of the "Low voltage" Directive 2006/95/EC;

• Safety requirements of the "EMC" Directive 2004/108/EC;

• Requirements of the Directive 93/68/EC.

CONTENTS:

1. BRIEF PRESENTATION OF PRODUCT

2. WARNINGS

3. INSTALLATION AND PREPARATIONS FOR USE

3.1 Environment where the appliance to be installed

3.2 Installation of product

3.3 Adjustment of feet

3.4 Gas connection

3.5 Electric connection and safety

3.6 Gas conversion

4. USE OF YOUR PRODUCT

4.1 Use of gas burners

4.1.1 Control of hob burners

4.1.2 Control of oven burner

4.1.3 Control of grill burner

4.1.4 Use of mechanical minute minder

4.2 Accessories used in oven

5. CLEANING AND MAINTENANCE

5.1 Cleaning

5.2 Maintenance

6. SERVICE AND TRANSPORT

6.1

Basic troubleshooting before contacting service

6.2 Information related to the transport

1. BRIEF PRESENTATION OF PRODUCT

List of Components:

1- Cooktop 2- Control Panel 3- Oven Door Handle 4- Cover 5- Adjustable Feet 6- Oven Door 7- Oven Tray 8- Wire Grid

MODEL DEPTH WIDTH HEIGHT (cm) (cm) (cm)

CSG60WH 60 60 90

60 50 90CSG50WH

9- Grill Burner 10- Oven Lamp 11- Semi-Rapid Burner 12- Rapid Burner 13- Auxillary Burner 14- Pan Support 15- Semi-Rapid Burner

2. WARNINGS

TAKE ALL IMPORTANT SAFETY MEASURES AND READ THE MANUAL COMPLETELY BEFORE

USING THE APPLIANCE.

General Safety

• These warnings are provided in the interest of your safety. Read this manual carefully before using the appliance.

• This appliance has been designed for non-professional, domestic use only.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Your appliance is produced in accordance with the local and international standards and regulations applicable.

• The maintenance and repair works must be made only by authorized service technicians. The installation and repair works without following proper knowledge may endanger you.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• If your appliance has a hob made of glass;

• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of

electric shock.

• Do not try to lift or move the appliance by pulling the door handle.

• It is dangerous to alter or modify the specifications of the appliance in any way.

Installation

• The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement and installation by unauthorized people.

• When you unpack the appliance, make sure that it is not damaged during transportation. In case of any defect; do not use the appliance and contact to the authorized maintenance service immediately. As the materials used for package (nylon, stapler, strafoam...etc) may cause harmful effects to children, they should be collected and removed immediately.

For authorized people;

• Compare the features of the electricity network with the technical information on the rating label before plugging the appliance in.

• Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible. The adjustment conditions for this appliance are stated on the label.

• This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with current installation regulations. Particular attention shall be

2. WARNINGS

given to the relevant requirements regarding ventilation.

The gas inlet of this product is on the right side of the appliance. If connection point needs to be

•

moved to the left side of the appliance, you can request an extension pipe from your authorized service.

During Use

• When you first run your oven a certain smell will be emanated arising from the insulation materials and the heater elements. For this reason, before using your oven, run it empty at maximum temperature for 45 minutes. At the same time you need to properly ventilate the environment in which the product is installed.

• While your appliance operates, its outside surfaces heat up. The interior surfaces of oven and the flue outlet are quite hot. Even if the appliance is turned off, these parts keep its heat for a specific time. Do not touch onto hot surfaces and keep children away.

• Always use oven gloves to remove and replace food in the oven.

• Always stand back from the appliance when opening the oven door to allow any build up of steam or heat to release.

• Do not leave the cooker while cooking with solid or liquid oils. They may catch fire on condition of extreme heating. Never pour water to the flames that are caused by oil. Cover the saucepan or frypan with its cover in order to choke the flame that has occured in this case and turn the cooker off.

• CAUTION: The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use, keep natural ventilation holes open or install a mechanical ventilation device(mechanical extractor hood).

• CAUTION: This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

• While using the grill burner, keep the oven door open and always use the grill deflector shield supplied with the product. Never use the grill burner with the oven door closed.

• If you will not use the appliance for a long time, plug it off. Keep the main control switch off. Also when you do not use the appliance, keep the gas valve off.

• CAUTION: Turn off all the burners before shutting the lid.

The hob surface should be allowed to cool before closing the lid.

• When the door or drawer of oven is open, do not leave anything on it. You may unbalance your appliance or break the cover.

• Do not put heavy things or flammable or ignitable goods (nylon, plastic bag, paper, cloth...etc) into the drawer. This includes cookware with plastic accessories (e.g. handles).

2. WARNINGS

• Protect your appliance against atmospheric effects. Do not leave it to effects such as sun, rain,

snow, powder etc.

• Do not keep flammable materials close while the appliance is operating.

• Pay attention to the cables of the other electrical devices operating near the appliance, so as

not to touch to hot points.

• The appliance is not intended to be operated by means of an external timer or separate remote

control system.

• Do not hang towels, dishcloths or clothes from the appliance or its handles.

• This manual is prepared for more than one model in common. Your appliance may not have

some of the features that is explained in manual. Pay attention to the expressions that have figures, while you are reading the operating manual.

Safety when Cleaning and Maintenance

• Turn the appliance off before the operations such as cleaning or maintenance. You can do it

after plugging the appliance off or turning the main switches off.

• WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the

possibility of electric shock.

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since

they can scratch the surface, which may result in shattering of the glass.

• Every care is taken to ensure the safety of the customer. Glass can break, be carefull when

cleaning the glass as not to scratch it. Do not knock or hit the glass with the accessories.

Children Safety

• CAUTION: Accesible parts may be hot when the grill is in use. Young children should be

kept away. Keep children away from the oven.

• While the front door is open, do not let climb on the door or sit on it.

• Children should be supervised to ensure that they do not play with the appliance.

FOR EFFICIENCY AND SAFETY OF APPLIANCE, WE RECOMMEND YOU ALWAYS TO USE THE ORIGINAL

SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICES IN CASE OF NEED.

• Prolonged intensive use of the appliance may call for additional ventilation, for example

opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

3. INSTALLATION AND PREPARATIONS FOR USE

This modern, functional and practical cooker, that was manufactured with the parts and materials of highest quality, will meet your cooking needs in every aspect. You must surely read this manual so that you don't have any problem in future and to be able to have satisfactory results. The following information are the required rules for right installation and service processes. It must be read especially by the technician who will install the appliance

Contact to Authorized Service for installation of your product

3.1 Environment where your appliance will be installed

Your product must be set up and used in a place where it will always have ventilation

• .

While operating, this appliance needs

• 2m /h air per kw input.

There must be a natural ventilation enough to provide the gas to be used in the environment.

•

The average air flow must directly come in through the air holes that will be opened on the walls that are opened towards outside.

Air inlet section min. 100cm

These air holes must have at least the effective cross section of 100cm for fresh air circulation

•

Figure 1

Air inlet section min. 100cm

Figure 2

(One or more air holes can be opened.). This hole (or holes) must be opened so that they are not blocked. Preferably they must be placed close to the bottom and at opposite side of the smokes of the burned gases that were emptied. If it seems not possible to open these ventilations in the place where the appliance is set up, the needed air can also be obtained through the next room, provided that this place is not a bedroom or a dangerous place. In this case this “next room” must also be ventilated as required.

Emptying of the Burned Gases from Environment

The cooking appliances that operate with gas, throw the burned gas wastes out directly to the outside or through the cooker hoods that are connected to the a chimney that opens directly to the outside. If it seems not possible to install a cooker hood, it is required to set an electric fan on the window or wall that has access to fresh air. This electric fan must have the capacity to change the air of the kitchen environment 4-5 times of its own volume of air per hour

3. INSTALLATION AND PREPARATIONS FOR USE

Cooker hood

flue

Electrical ventilator

Air inlet section

min. 100cm

Figure 3

Min. 60cm

Air inlet section

min. 100cm

Figure 4

COOKER HOOD

Min. 42cm

Min. 70cm(without hood)

Min. 65cm(with hood)

Min. 42cm

Figure 5

3.2 Installation of product

There are some factors that must be paid attention to while installing your product. Surely be very careful to while installing your product. Pay attention to our below instructions in order to be able to prevent any problems and/or dangerous situations that may occur later

The appliance can be placed close to other furniture on condition that in the area where the

• oven is set up, the furniture's height does not exceed the height of the cooker panel

Pay attention not to place it near the refrigerator, there must be no flammable or inflammable

• materials such as curtain, waterproof cloth, etc. that will begin to burn quickly

It is required that there must be least a 2cm blank space around the product for air circulation

• .

The furniture close to product must be manufactured resistant to temperatures up to

• 80°C.

If the kitchen furniture are higher than the cooktop, it must be at least 10cm away from the

• cooker's side.

The minimum heights from the pan support and wall cupboards to cooker hoods with fan over the product, are shown in figure 5. Thus, the cooker hood must be at minimum 65cm height from the pan support. If there is no cooker hood, this height must not be less than 70cm.

3. INSTALLATION AND PREPARATIONS FOR USE

3.3 Adjustment of feet

Your stands on 4 adjustable feet. When the is

product product placed where to be used, check if the product is balanced. If it is not balanced, you can make the adjustment by turning the feet clockwise if required. It is possible to raise the appliance maximum 30mm by the feet. If the feet are adjusted appropriately, it is required not to move the appliance by dragging, it should be moved by lifting it up

Figure 6

3.4 Gas connection

Assembly of gas supply and leakage check

The connection of the appliance should be performed in accordance with local and international standards and regulations applicable. You can find the information related to appropriate gas types and appropriate gas injectors on technical data table. If the pressure of used gas is different than these values stated or not stable in your area, it may be required to assemble an available pressure regulator on the gas inlet. It is certainly required to contact to the authorized service to make these adjusments.

The points that must be checked during flexible hose assembly

If the gas connection is made by a flexible hose that is fixed on the gas inlet of appliance, it must be fixed by a pipe collar as well. Connect your appliance with a short and durable hose that is as close as possible to the gas source. The hose's permitted maximum lenght is 1.5m. The hose that brings gas to the appliance must be changed once a year for your safety.

The hose must be kept clear from areas that may heat up to temperatures in excess of 50 C. The hose must not be ruptured, bent or folded. It must be kept clear of sharp corners, moving things, and should not be defective. Before assembly, it must be checked whether there is any production defect.

As gas is turned on, all connection parts and hose must be checked with soapy water or leakage fluids. Do not use naked flame to check gas leakage. All metal components used during gas connection must be clear of rust. Also check the expiry dates of components to be used.

The points that must be checked during fixed gas connection assembly

To assemble a fixed gas connection (gas connection made by threads, e.g. a nut), there are different methods used in different countries. The most common parts are already supplied with your appliance. Any other part can be supplied as spare part.

During connections always keep the nut on the gas manifold fixed, while rotating the counter-part. Use spanners of appropriate size for safe connection. For all surfaces between different components,

3. INSTALLATION AND PREPARATIONS FOR USE

always use the seals provided in the gas conversion kit. The seals used during connection should also be approved to be used in gas connections. Do not use plumbing seals for gas connections.

Remember that this appliance is ready to be connected to gas supply in the country for which it has been produced. The main country of destination is marked on the rear cover of the appliance. If you need to use it in another country, any of the connections in the figure below can be required. In such a case, learn the appropriate connection parts and obtain those parts to perform a safe connection.

Gas Pipe Gas Pipe Gas Pipe Gas Pipe

Seal

Hose Fitting

Gas Hose with Collar

Seal

Adapter

Mechanical Gas Hose

Seal

Mechanical Gas Hose

Figure 7

It is required to call the authorized service to be able to make the gas connections appropriately and in compliance with safety standards.

ATTENTION! .

Surely do not use any match or lighter for control of gas leakage

3.5 Electric connection and safety

During the electric connection, follow the instructions stated in the user manual

• .

The earthing cable must be connected to the earth terminal

•

You have to ensure the power cord with suitable insulation to be connected to the power source during the connection If there is no appropriate earthed electric outlet in accordance with

regulations in the place where the appliance to be installed, contact to our authorized service. The earthed electric outlet must be close to the appliance.

• .

Do not use an extension cord

•

The power cord must not touch to the hot surface of the product.

• .

In case the cord is damaged, contact Authorized Service to have it changed

•

Any wrong electric connection may damage your appliance, as well as endangering your safety, rendering your guarantee invalid

3. INSTALLATION AND PREPARATIONS FOR USE

• .The appliance is adjusted for 230V 50Hz electricity. If the mains electricity is different contact your authorized service

BROWN

YELLOW+GREEN

The supply cord should be kept away from hot parts of appliance. Otherwise, the cord may be

• damaged, causing short circuit.

The manufacturer declares that it has no responsibility against any kind of damages and losses

• that are caused by improper connections that are performed by unauthorized people

3.6 Gas conversion

Caution : The following procedures must be undertaken by authorized service people.

Your appliance is adjusted to be operated with NG gas. The gas burners can be adapted to different types of gas, by replacing the corresponding injectors and adjusting minimum flame length suitable to the gas in use. For this purpose, following steps should be performed

Changing injectors:

Hob Burners

Cut off the main gas supply and unplug from the electric mains

• .

Remove the burner cap and the adapter(Figure 9).

•

Unscrew the injectors. For this, use a 7mm spanner(Figure 10).

•

Replace the injector with the ones from the gas conversion kit, with corresponding diameters

• suitable to the type of gas that is going to be used, according to the information chart (which is also supplied in the gas conversion kit).

Figure 8

BLUE

3. INSTALLATION AND PREPARATIONS FOR USE

Injector

Spanner

Figure 10

Oven/Grill Injectors

Figure 9

The oven and grill injectors are assembled by a single screw that is placed on the tip of the burner. For grill burners, this screw is already visible(Figure 11). Remove the screw, pull the grill burner to yourself and you will see the injector revealed on the rear surface of the oven cavity (Figure 12).

For oven burners, open the drawer compartment and you will see the assembly screw below the burner (Figure 13). Remove the screw, move the burner diagonally and the injector will be revealed on the rear side of the burner box (Figure 12).

Remove the injectors with a 7mm spanner and replace the injector with the ones from the spare set, with corresponding diameters suitable to the type of gas that is going to be used, according to the information chart (which is also supplied in the gas conversion kit).

Screw

Injector

Figure 11

Adjusting the reduced flame position

Figure 12

Figure 13

The flame length in the minimum position is adjusted with a flat screw located on the valve. For valves with flame failure device, the screw is located on the side of the valve spindle(Figure 14). For easier reduced flame adjustment, it is advised to remove the control panel (and microswitch, if present) during adjustment.

3. INSTALLATION AND PREPARATIONS FOR USE

To determine the minimum position, ignite the burners and leave them on in minimum position. Remove the with the help of a small screwdriver fasten or loosen the bypass screw around 90 angular degrees. When the flame has a length of at least 4mm, the gas is well distributed. Make sure that the flame does not die out when passing from the maximum position to the minimum position. Create an artificial wind with your hand toward the flame to see if the flames are stable.

Valve with flame failure device

Bypass Screw

Figure 14

For oven burner, operate the oven burner at minimum position for 5 minutes, then open and close the oven door for 2-3 times to check the flame stability of the burner.

Reduced flame position adjustment is not required for grill burners.

The position the bypass screw must be loosened for conversion from NG. For conversion from NG, the same screw must be fastened. Make sure that the appliance is unpluged from the electric mains and the gas supply is open.

Thermostatic oven valve

Bypass Screw

Figure 15

Changing the gas inlet:

For some countries, the gas inlet type can be different for NG gases. In such a case, remove the

current connection components and nuts (if any) and connect the new gas supply accordingly. In all conditions, all components used in gas connections should be approved by local and/or international authorities. In all gas connections, refer to the “Assembly of gas supply and leakage check” clause explained before.

4. USE OF YOUR PRODUCT

4.1 Use of gas burners

Ignition of the burners

To determine which knob controls which burner, check the position symbol above the knob.

Manual Ignition of the Gas Burners

•

If your appliance is not equipped with any ignition aid or in case there is a failure in the electric network, follow the procedures listed below

For Hob Burners: To ignite one of the burners, press and turn its knob counter-clockwise so that the knob is in maximum position, approach a match, taper or another manual aid to its upper circumference. Move the ignition source away as soon as you see a stable flame.

For Oven Burner: To ignite the oven burner, press and turn the oven control knob counter-clockwise so that the knob is in maximum position, approach a match, taper or another manual aid to the ignition hole that is located on the front left corner of the burner. Move the ignition source away as soon as you see a stable flame.

For Grill Burner: To ignite the grill burner, turn the grill valve in the clockwise position until the marker on the knob points at the grill sign. Then, keep the knob pressed and approach a match, taper or another manual aid to the holes that are situated on the burner. Move the ignition source away as soon as you see a stable flame.

•

Electrical Ignition

Electrical ignition of gas burners can be done in two ways; depending on the configuration of your appliance

Ignition by Spark Button: Press the valve of the burner you want to operate and turn the valve in the counter-clockwise direction so that the knob is in maximum position and with your other hand, press the ignition button (Figure 16) at the same time. Press the ignition button immediately, because if you wait, a build up of gas may cause the flame to spread. Continue pressing the ignition button until you see a stable flame

Figure 16

Ignition Through Hob Valve (micro switch): Press the valve of the burner you want to operate and

turn the valve in the counterclockwise direction (clockwise for the grill burner) so that the knob is in maximum position while keeping the knob pressed. The spark plugs will generate sparks as long as you keep the control knob pressed. The micro switch placed under the knob will automatically create sparks through the spark plug of the burner. Continue pressing the knob until you see a stable flame on the burner.

on the burner.

4. USE OF YOUR PRODUCT

Flame safety device:

Hob Burners (If your hob is equipped with gas safety device)

Hobs equipped with flame failure device provide security in case of accidentally extinguished flame. If such a case occurs, the device will block the burners gas lines and will avoid any accumulation of unburned gas. Wait 90 seconds before re-igniting an extinguished gas burner

Oven / Grill Burners

Regardless of the model of your appliance, all oven burners are equipped with a gas safety device. For this reason, during ignition, keep the oven knob pressed until you see stable flames. If the flames are cut out after you release the knob, repeat the procedure again. If the oven burner does not ignite after you keep the burner knob pressed for 30 seconds, open the oven door and do not attempt re-ignition for at least 90 seconds. When oven flames go out accidentally, repeat the same procedure

4.1.1 Control of the hob burners

OFF position

MAX. position

MIN. position

MODULATE

Figure 17

The knob has 3 positions: Off (0), maximum (big flame symbol) and minimum (small flame symbol). After you ignite the burner in maximum position; you can adjust the flame length between maximum and min. positions. Do not operate the burners when the knob position is between maximum and off positions.

After the ignition, check the flames visually. If you see yellow

Cap

tip, lifted or unstable flames; turn the gas flow off, and check the assembly of burner caps and crowns (Figure 20). Also, make sure that no liquid has flown into the burner cups. If

Crown

Spark Plug

Burner Cup

Figure 18

the burner flame goes out accidentally, turn the burner off, ventilate the kitchen with fresh air, and do not attempt reignition for 90 sec.

When turning the hob off, turn the knob in the clockwise direction so that the knob shows "0" position or the marker

on the knob points upwards.

4. USE OF YOUR PRODUCT

Your hob has burners of different diameters. The most economic way of using gas is to choose the correct size gas burners for your cooking pan size and to bring the flame to minimum position once the boiling point is reached. It is recommended to always cover your cooking pan.

In order to obtain maximum performance from the main burners, use pots with the following flat bottom diameters. Using smaller pots than the minimum dimensions stated below will cause energy loss. Rapid Burner: 22-26cm Semi-rapid Burner: 14-22cm Auxiliary Burner: 12-18cm

Make sure that the tips of the flames do not spread out of the outer circumference of the pan, as this may also harm the plastic accessories around the pan (handles etc.).

Figure 19

When the burners are not in use for prolonged periods, always turn the main gas control valve off

.WARNING:

• Use only flat pans and with a sufficiently thick base.

• Ensure that the base of the pan is dry before placing it on the burners.

• The temperature of accessible parts may be high when the appliance is operating. So it is imperative to keep children and animals out of the reach of the burners during and after cooking.

• After use, the hob remains very hot for a prolonged period of time, do not touch it and do not place any object on top of the hob.

• Never place knives, forks, spoons and lids on the hob as they will get hot and could cause serious burns.

+ 39 hidden pages