Nordmende CSE60WH User Manual [de]

CSE60WH
CSE60IX
OPERATING AND INSTALLATION
INSTRUCTIONS OF ELECTRICAL
FREESTANDING
TM
OVEN
Dear Customer,
This manual is prepared in order to help you to use your appliance that is manufactured by the most recent technology, with confidence and maximum efficiency.
Before using your appliance, carefully read this guide that includes the basic information for right and safe installation, maintenance and use and contact to the nearest Authorized Service for mounting of your product.
CONTENTS :
1. PRESENTATION AND SIZES OF PRODUCT
2. WARNINGS
3. INSTALLATION AND PREPARATIONS FOR USE
4. USE OF YOUR OVEN
5. CLEANING AND MAINTENANCE
6. SERVICE AND TRANSPORT
PART 1 : PRESENTATION AND SIZES OF PRODUCT
2 3
4
1
Part of List :
1011
12
13
9
8
7
6
5
1- Cooktop Cover 2- Cooktop 3- Control Panel 4- Oven Door Handle 5- Drawer Cover 6- Supply Leg 7- Oven Door 8- Oven Tray 9- Wire Grid 10- Front Resistance
11- Fan Store 12- Oven Lamp 13- Hotplate
MODEL
CSE60WH
CSE60IX
SIZE(cm)
60*60*90
PART 2 : WARNINGS
TAKE ALL IMPORTANT SECURITY MEASURES AND READ THE MANUAL COMPLETELY BEFORE USING THE APPLIANCE
This appliance has been designed for non-professionel, domestic use only.
Surely control whether there is any damage after you unpacked the appliance.
If there is any defect; do not use the appliance and immediately contact to the authorized maintenance service. As the materials used for package ( nylon, stapler, strafoam. etc. ) may cause harmful effects to children, they should be collected and removed immediately.
The appliance must be set up by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective placement.
Before connecting your appliance to the electric , carefully control
whether it is appropriate for the features determined on the package and/or data plate on the appliance.
Compare the features of the electricity organization with the technical information
on the presentation label before plugging the appliance in.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Before changing the ovens lamp, disconnect the appliance from supply.
Turn the appliance off before the operations such as cleaning or maintenance.
You can do it after plugging it off or turning the main switches off
Some parts of appliance may hold its heat for a long time, it is required to wait for it to cool before touching onto the points that are exposed to the heat directly.
This appliance is not intended for use by persons(including children) with reduced physical, sensory and mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not keep flammable materials close while the appliance is operating.
Pay attention to the cables of the other electrical devices operating near the appliance, so as not to touch to hot points.
Pay attention the switches to be off position 0, when the appliance does not operate.
The glass lid that some models have may crack when they are exposed to extreme heat. Do not close the glass lid without being sure that the cooker is off and cooled completely.
This manual is prepared for more than one model in common. Your appliance may not have some of the features that is explained in manual. Pay attention to the expressions that have figures, while you are reading the operating manual.
In case of the visible cracks on the ceramic surface of the oven, switch off the
oven.
During the use the appliance gets hot. Take special care to prevent touching of heating elements inside oven cavity.
During grilling mode the oven door should be closed.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering of the glass.
Before opening the lid covering the hotplates, take care that no liquids are on the top of the lid. The lid is to closed not earlier than hobs have been cooled down.
Take care that the lid is in correct position under operation.
In case that highlight-halogen heaters are installed as hob elements do not stare into the light.
In case that the oven will be placed on a socket steps must be resorted to prevent falling down of the oven from the socket.
A steam cleaner shall not be used.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, such as a timer, or connected to a circuit that is regularly switched on and off by the
utility.
FOR EFFICIENCY AND SECURITY OF APPLIANCE, WE RECOMMEND YOU ALWAYS TO USE THE ORIGINAL SPARE PARTS AND TO CALL ONLY OUR AUTHORIZED SERVICES WHEN IN CASE OF A NEED.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
WARNING: Accessible parts may become hot during use. Young children should be kept away.
WARNING: Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
this appliance must not be supplied through an external switching device,
PART3 : INSTALLATION AND PREPARATION FOR USE
This modern, functional and practical oven, that was manufactured with the most quality parts and materials, will meet your needs in every respect. You must surely read this manual in order not to have any problem in future and to be able to have successfull results. The following information are the required rules for right installation and service processes. It must be read especially by the technician who will install the appliance.
Contact to Authorized Service for mounting of your oven.
3. 1 INSTALLATION OF OVEN
There are some factors that must be paid attention to while installing your oven.
Surely pay attention to our below suggestions in order to be able to prevent any problems and/or dangerous situations that may occur later.
It can be placed close to other furniture on condition that in the area where the oven
is set up, the furnitures height must not exceed the height of the cooker panel.
Pay attention not to place it near the refrigerator, there must be no flammable or
in flammable materials such as curtain, waterproof cloth etc. that will begin to burn quickly, while selecting place for oven.
It is required there must be at least 2 cm blank space between the back cover of
oven and wall for air circulation.
The furniture close to oven must be manufactured resistant to heat more than
50 C° of the room temperature.
If the kitchen furniture are higher than the pan which the ovens cookers are on,
it must be at least 11 cm away from the ovens side.
The minimum heights from the ovens pan and wall cupboards and paddle boxes
with fan over the oven, are shown as below. Thus, the paddle box must be at minimum 650 mm height from the cooker pan. If there is no paddle box, this height must not be less than 700 mm.
This appliance must only be installed directly on the floor and not on a base.
3.2 ELECTRIC CONNECTION AND SECURITY
During the electric connection, surely follow the instructions below.
The earthing cable must be connected to the terminal. You have to ensure the
cable with insulation to be connected to the power source during the connection of cable. If there is not any appropriate earthed electric outlet in accordance with regulations in the place where the appliance will be installed, immediately contact to our authorized service.
The earthed electric outlet must be close to the appliance. Surely do not use the
extension cord.
The supply cable must not touch to the hot surface of the product.
In case the supply cable is damaged, surely contact to Qualified Service. The cable must be changed by the authorized service.
The wrong electric connection may damage your appliance. Such damage is not
in guarantee extent.
The appliance is adjusted as appropriate for 220-240 Volts and 380-415V 3N Volts
of electricity. If the network electricity is different than this informed value, immediately contact to our authorized service.
The electric cable must not touch to the hot parts of appliance. The electric cable must not touch the back part of the appliance. Otherwise the electric cable of appliance may be damaged. And this situation may cause short circuit.
The producer firm declares that it has no responsibility against any kind of damages and losses that emanate from the following security norms.
Provide a means of disconnection from the supply having an air gap contact
separation of at least 3mm in all active (phase) conductors. Such means of disconnection shall be incorporated in the fixed wiring according to the wiring rules.
The appliance is provided for fixed connection to the power supply. The connection
of the appliance to an electrical source must be done by authorized technician.
For fixed connection, use the H05VV, H05V2V2 or H05RR type supply cord.
For fixed connection, use 3x2,5mm2 or 3x4mm2 sized cable according to appliances power and terminal box label.
Some appliances can be equipped with special plug (Perilex or Norplug). If it is necessary, change it with the same specified spare part.
Use 16A/400V 5 pin for perilex plug and 25A/250V for Norplug.
These plugs can be used only in some countries.
3. 3 GENERAL WARNINGS AND MEASURES
Your appliance is produced in accordance with the related security instructions
connected with electrical appliance. The maintenance and repair works must be made just by the authorized service technician who is trained by the producer firm. The installation and repair works whitout following rules may endanger you.
Its outside surfaces heat while your appliance operates. The interior surfaces of
oven, components that ensures the heat and steam that goes out are quite hot. Even if the appliance is turned off, these parts hold its heat for a specific time. Do not touch onto the hot surfaces. Keep children away.
Do not leave the cooker while cooking with solid or liquid oils. There may be flaming
up on condition of extreme heating. Never pour water to the flames occuring from oil. Cover the saucepan or frypan with its cover in order to choke the flame that was occured in this case and turn the cooker off.
The oven and heat adjustment switches must be adjusted and ovens clock must be programmed for cooking in your oven. Otherwise the oven does not operate.
Do not leave anything on it when the door or drawer of oven is open. You may unbalance your appliance or break the cover.
Do not put heavy things or flammable, burnable goods (nylon, plastic bag, paper, cloth etc.) into the lower drawer.
Plug it off when you do not use the appliance.
Protect your appliance against atmospheric effects. Do not leave it to effects such as sun, rain, snow, powder etc.
L
N
PE
² 230 V ² 240 V
3
2
1
3 x 4 mm² 220 V 3 x 4 mm 3 x 4 mm
4
5
3
2
1
5x1.5 mm² 380 V 3N 5x1.5 mm² 400 V 3N 5x1.5 mm² 415 V 3N
N
L
3
L
2
L
4
5
PE
4.1 GENERAL APPEARENCE AND TECHNICAL FEATURES OF YOUR OVEN
YE 66
LOWER HEATER UPPER HEATER GRILL TURBO HEATER
1100 WATT 1200 WATT 2000 WATT
2000 WATT
4.2 PRESENTATION AND FEATURES OF THE CONTROL PANELS
YE 66
Oven Function
Switch
Oven Thermostat
Switch
Mecanic Timer
Right Front Heater Right Back Heater
Left Back Heater
Left Front Heater
4.3 USE OF HOTPLATES COOKERS
The electrical cooker is commanded by 7 graded switches. 0 of the grades is off location. The use fields in response to other 6 grades are below.
1...... .....Keeping hot location
2-3.....Heating locations at low heat
4-5-6..Cooking - roasting and boiling
locations
Hotplates
The upper part of hotplates is covered by a protective material resistant to heat. Turn the switch of the electrical cooker to 3 and then operate the cooker for 5 minutes in order to burn and so to toughen the protective layer at first use. During use of electrical cookers, it is required to pay attention to the used saucepans to have smooth bases. If appropriate sized and smooth based saucepans are used, you can get the most efficiency from your cooker. It is not suggested to use the little size saucepans on the big size cooker, because this will cause heat loss and so energy will be wasted.
RIGHT
WRONG
circular saucepan base
WRONG
small saucepan diameter
saucepans base had not settled
WRONG
Surely control that your cooker is off, the control switch is at 0 location after cooking. Also never touch it as the cooker will be hot for a speific time after it was turned off. Do not let children to come close to it. Clean the electrical cooker with a wet cloth after using the electrical cooker. If there is excessively getting dirty situation, you can clean it with water with detergent rather well. Heat for a few minutes for the upper part to dry after cleaning. If you will not use its upper part for a while, ensure to occur a thin oil layer as oiling with machine oil.
4.4 Use of Mechanical Timer
Manual Operation
0
M
100
90
80
70
When you set the timer
10
knob to M position as
20
seen in the illustration
30
30
on left side, the oven
40
40
can be operated
50
continuously. The oven
60
can never be operated, when the timer knob is in 0 position.
Operation with time set
Turn the timer knob in clockwise direction in order to set time between 0-100 minutes as seen in figure on right side. When the adjusted time ends, oven is turned off and a single warning sound is heard.
0
M
100
90
80
10
20
30
40
50
60
70
Loading...
+ 28 hidden pages