NordicTrack NTEL07808.1 User Manual

www.nordictrack.com

Model No. NTEL07808.1
Serial No.

Write the serial number in the
space above for reference.

____________

Serial Number Decal

(on underside of frame)

QUESTIONS?

As a manufacturer, we are commit
ted to providing complete customer
satisfaction. If you have questions,
or if parts are damaged or missing,
DO NOT CONTACT THE STORE;
please contact Customer Care.

USER’S MANUAL

IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:

CALL TOLL-FREE:

1 -888-825-2588

Mon.-Fri. 6 a.m.-6 p.m. MT
Sat. 8 a.m.-4 p.m. MT

ON THE WEB:
www.nordictrackservice.com

A CAUTION

Read all precautions and instruc
tions in this manual before using
this equipment. Keep this manual
for future reference.

TABLE OF CONTENTS

WARNING DECAL PLACEMENT...........................................................................................................................2

IMPORTANT PRECAUTIONS ...............................................................................................................................3

BEFORE YOU BEGIN ............................................................................................................................................4

ASSEMBLY.............................................................................................................................................................5

HOW TO USE THE ELLIPTICAL EXERCISER ...................................................................................................12

MAINTENANCE AND TROUBLESHOOTING .................................................................................................... 21

EXERCISE GUIDELINES.....................................................................................................................................22

PART LIST ...........................................................................................................................................................23

EXPLODED DRAWING .......................................................................................................................................25

ORDERING REPLACEMENT PARTS....................................................................................................Back Cover

LIMITED WARRANTY ............................................................................................................................Back Cover

WARNING DECAL PLACEIVIENT

This drawing shows the location(s) of
the warning decal(s). If a decal is

missing or iilegibie, see the front
cover of this manual and request a
free replacement decal. Apply the
decal in the location shown. Note:

The decal(s) may not be shown at
actual size.

AWARNING

.Keep hands and
fingers clear of

this area.

AWARNING

Misuse of this machine
may result in serious

injury.
Read user’s manual

prior to use and follow
all warnings and
instructions.

Do not allow children
on or around machine.

Pedals continue to
spin when you stop

pedaling.
Spinning pedals can

cause injury.
Reduce pedal speed

in a controlled manner.
User weight must not

exceed 275 pounds.
Replace label if

damaged, illegible, or
removed.

NordicTrack is a registered trademark of ICON IP, Inc.

IMPORTANT PRECAUTIONS

Awarning I To reduce the risk of serious injury, read ail important precautions and

instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.

1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.

3. Your elliptical exerciser is intended for home
use only. Do not use your elliptical exerciser
in a commercial, rental, or institutional set
ting.

4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place your elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is at least 3 ft. (1 m) of
clearance in the front and rear of your ellipti
cal exerciser and 2 ft. (0.6 m) on each side.

5. Inspect and properly tighten ail parts regu
larly. Replace any worn parts immediately.

6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.

7. Your elliptical exerciser should not be used
by persons weighing more than 275 lbs.
(125 kg).

8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exer
ciser. Always wear athletic shoes for foot
protection.

9. Hold the handgrip pulse sensor or the han
dlebars when mounting, dismounting, or
using your elliptical exerciser.

10. Keep your back straight while using your
elliptical exerciser; do not arch your back.

11. The pulse sensor is not a medical device.
Various factors, including the user’s move
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.

12. When you stop exercising, allow the pedals
to slowly come to a stop.

13. If you feel pain or dizziness while exercising,
stop immediately and cool down.

14. Use your elliptical exerciser only as
described in this manual.

BEFORE YOU BEGIN

Thank you for selecting the new NordicTrack® E7 SV
FRONT DRIVE elliptical exerciser. The E7 SV FRONT
DRIVE elliptical exerciser provides a wide array of fea
tures designed to make your workouts at home more
effective and enjoyable.

For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques
tions after reading this manual, please see the front

cover of this manual. To help us assist you, note the
product model number and serial number before con
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser In a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly Is completed.

In addition to the included tool(s), assembly requires^ Phillips screwdriver > wrenches o———, and a rubber mallet i

As you assemble the elliptical exerciser, use the drawings below to Identify small parts. The number In parenthe
ses below each drawing Is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses Is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.

---------

-

two adjustable

1.

2. Orient the Ramp (3) as shown. Then, insert the

Ramp into the Frame (1).

Attach the Ramp (3) with five M8 x 19mm Patch
Screws (82) and five M8 Split Washers (83).

3. While a second person holds the Upright (4)
near the Frame (1), connect the Upper Wire
Harness (110) to the Lower Wire Harness (111).

Tip: Avoid pinching the wires. Slide the

Upright (4) onto the Frame (1). Attach the

Upright with four M8 x 19mm Patch Screws (82)
and four M8 Split Washers (83). Do not tighten
the Patch Screws yet.

4. Apply a small amount of the Included grease to
the right Crank Arm (20) and to a 19mm Wave
Washer (66).

Slide a Crank Arm Spacer (55) and the 19mm
Wave Washer (66) onto the right Crank Arm

(20).

Identify the Right Roller Arm (59), which Is
marked with a “Right” sticker, and orient It as
shown.

Slide the Right Roller Arm (59) onto the right
Crank Arm (20). Attach the Right Roller Arm
with an M8 X 19mm Patch Screw (82), an Axle
Cover (53), and an M8 x 25mm Washer (98); to
avoid breaking the Axle Cover, do not over
tighten the Patch Screw.

Repeat this step for the Left Roller Arm (not shown).

5. Identify the Right Pedal Bracket (64), which Is
marked with a “Right” sticker.

Apply a small amount of grease to the Inside of
the tube on the Right Roller Arm (59) and to the
barrel of an M10 x 60mm Bolt (100).

Attach the Right Pedal Bracket (64) to the Right

Roller Arm (59) with the M10 x 60mm Bolt
(100), an M10 Washer (95), and an M10
Locknut (92). Do not overtighten the Locknut;
the Right Pedal Bracket must pivot freely.

Repeat this step for the Left Pedal Bracket
(48).

6. Identify the Right Handlebar (61) and the Right
Handlebar Leg (60), which are marked with
“Right” stickers, and orient them as shown.
Make sure that the hexagonal holes are in
the indicated location.

Slide the Right Handlebar (61) onto the Right
Handlebar Leg (60).

Attach the Right Handlebar (61) with two M8 x
38mm Bolts (96) and two M8 Locknuts (102).
Make sure that the Locknuts are in the
hexagonal holes.

Repeat this step for the Left Handlebar (not
shown) and the Left Handlebar Leg (not
shown).

7. Apply a small amount of grease to the Pivot
Axle (35) and to a 16mm Wave Washer (54).

Insert the Pivot Axle (35) through the Upright (4)

and then center it.
Slide the 16mm Wave Washer (54), an Inner

Handlebar Cover (68), and the Right Handlebar
Leg (60) onto the right side of the Pivot Axle
(35).

Repeat this step for the Left Handlebar Leg (not shown).

Tighten an M8 x 19mm Patch Screw (82) and
an M8 X 25mm Washer (98) into each end of
the Pivot Axle (35).

8

8. Attach an Outer Handlebar Cover (67) and the

Inner Handlebar Cover (68) around the Right
Handlebar Leg (60) with two M4 x 16mm
Screws (104).

Repeat this step for the other side of the eiiipticai exerciser.

9. Apply a small amount of grease to the axle on
the Right Handlebar Leg (60) and to a 19mm
Wave Washer (66).

Identify the Right Pedal Arm (58), which is
marked with a “Right” sticker, and orient it as
shown.

Slide the 19mm Wave Washer (66) and the

Right Pedal Arm (58) onto the Right Handlebar
Leg (60).

Attach the Right Pedal Arm (58) with an M8 x

19mm Patch Screw (82), an Axle Cover (53),
and an M8 x 25mm Washer (98); to avoid

breaking the Axle Cover, do not overtighten
the Patch Screw.

Repeat this step for the Left Pedal Arm (not shown).