NORD TI 278910061 User Manual

Page 1
M8
Technical Information / Datasheet
Pos: 1 /Technis c h e Inf ormation en/ Zubehör/A dapter 300 E 24 VD C M 8 St ecker - M12 Buc h s e / 278910061/ Basisinfor mationen [A dp at er SK 300E 24VD C ] @ 4\mod_1383219107631_388.docx @ 104471 @ 55555 @ 1
Adapter 300E 24V DC M8 plug connector / M12 socket
Connection cable for external 24V supply M8 to M12 round plug connector

Scope of delivery

Part number: 278 910 061
1 x Adapter 300E 24V DC
Connection cable
M8 straight plug connector, M12 straight socket

Field of use

The adapter is used to con nect the 24 V DC power suppl y for migration f rom SK 300E to SK 180E ... SK 2xxE frequency invert er field bus applications. Via an adapt er cable it is possible to connect the M8 round plug connector for the external 2 4 V power suppl y of the SK T U2-xxx bus options to an M12 round plug connector for the SK xU4-xxx field bus options.
Use
The connection cable is intended for the following field bus technology units / applications.
SK 300E
SK TU2-PBR-24V (-C)
Plug
connector
3 pin
M12
Socket
3 pin
SK 180E … SK 2xxE
SK CU4-PBR
SK TU4-PBR (-C)
SK TU4-PBR-M12 (-C)
Adapter SK 300E 24 V DC
1.0 Erstausgabe / first issue 0814 Bch TI 278910061 GB
version reason for change(s) issue name document speech
Page 2
Adapter – SK 300E 24 V DC
Temperature range
- 25 … + 80 °C
Weight
24 g
Housing M8 / M12
Black / RAL 9005
Contact sets
3 pin
Contact insert
Green / RAL 6018
Fastening
Hexagonal nut
Connection / Type
M8x1, straight plug
Cable / Sheath material
Black / RAL 9005
Mech. service life
2 million
Conductor insulation Number of conductors /
3 x 0.25 mm
2
Degree of fouling
3
Dimensions
Operating voltage
max. 60 V
Current capacity
4 A
Conductor insulation /
UL, CSA / (brown,
Rated surge voltage
1,5 kV
Insulating material group
Category I

Technical data

Version
Colour / Material
PUR - OB
Contacts / Coding
Colour / Material Screw M8x1 / M12x1
Material
Round plug connector
Plastic Injection moulded zinc
nickel plated
connector
Tightening torques * M8x1 plug c onnector M12x1 socket
M12x1, straight socket
Protection class
(screwed) * Suitable assembly spanners (SW = Width across flats) are commercially available (see Assembly)
IP67
Colour / Material
material
Cable
PUR-OB
PP
Plugging cycles / Torsion
Cross section
A – coded (M12 only)
M8x1 * SW 9 M16x1 * SW 13
0.4 Nm
0.6 Nm
for 35 plugging
cycles / minu te
+/- 180° / m
Cable length L Total length of adapter
150 mm 227 mm
Insulation resistance ≥ 108
Strands Colours / Material
black, blue) PP

Circuit diagram

SK 300E
M8 plug connector
(1) Cable sleeve (2) Cable printing L = 150 mm
Pos: 2 /Technis c h e Inf ormation en/ Zubehör/A dapter 300 E 24 VD C M 8 St ecker - M12 Buc h s e / 27 8 910061/An s chl üsse [Adapt er SK 300E 24VD C] @ 4\mod_1383219104722_388.docx @ 104396 @ 555 @ 1
per contact
IEC 60664-1
SK 180E … SK 2xxE
M12 socket
2 / 4 TI 278910061 - 0814
Page 3
Adapter – SK 300E 24 V DC
Pin
Colour
Signal
Pin
1
Brown
+24 V DC
1 4 Black Shield
4 3 Blue GND
3

Connections

For the 24V DC po wer supply, the ada pter is connected t o the M8 sock et of the supply cable and to the flanged plug connector of the M12 connection extension SK TIE4-M12-POW on the frequency inverter (see below)
Technology unit
SK TU2-PBR-24V
(M8 socket for ext. 24 V)
Adapter cable
SK 300E 24 V DC
M8 plug connector -
M12 socket
(1) M8 straight plug connector (2) M 12 straight socket

Electrical connections

M8 connector
Contact assignment
3 pin
plug connector,
straight
Connection extension
SK TIE4-M12-POW
M12 flanged plug
connector
Technology option
SK CU4-PBR
SK TU4-PBR-(M12) (-C)
M12 socket
Contact assignment
3 pin
socket,
straight
A – coded

Circuit diagram

Pos: 3 /Technis c h e Inf ormation en/ Zubehör/A dapter 300 E 24 VD C M 8 St ecker - M12 Buc h s e / 27 8 910061/ Mo nt ag e [A d ap t er SK 30 0E 24VDC] @ 4\mod_1383576367141_388.docx @ 104779 @ 5 @ 1
TI 278910061 - 0814 3 / 4
Page 4
Adapter – SK 300E 24 V DC
Information
Tightening torque
Information
Torque Wrench for Assembly
ially available assembly tool
with an adjustable, defined tightening torque (e.g. Murrelektronik). Please
Document
Name Document
Name
BU 0020
PROFIBUS DP Manual
BU 0220
PROFIBUS DP for SK 0200E
BU 0180
SK 180E…SK 190E frequency inverter manual
BU 0300
SK 300E frequency inverter manual

Assembly

Assembly of the adapter w hich is used for the migration of the round plug c onnectors from M8 to M12 should preferably be carried out with commercially available tools.
The stated tightening torques must be used for tightening the hexagonal nut on the M8 plug connector or on the M12 socket. Please refer to the technical data for the tightening torques.
M8 plug connector SW 9
Spanner sizes
Pos: 4 /Technis c h e Inf ormation en/ Zubehör/A dapter 300 E 24 VD C M 8 St ecker - M12 Buc h s e / 278910061/Drehmoment- Montageschlüs sel M 8 S W 9 und M12 SW 13 [A da pt er SK 300E 24VDC ] @ 4\mod_1383638004298_388.docx @ 104811 @ @ 1
Pos: 5 /Technis c h e Inf ormation en/ Zubehör/A dapter 300 E 24 VD C M 8 St ecker - M12 Buc h s e / 27 8910061/ Weiterführe nde Doku mentatione n [Adapter S K 300E 24 VDC] @ 4\mod_1383573355276_388.docx @ 104751 @ 5 @ 1
M12 socket SW 13
In order to ensure a secure, sealed and vibration-proof connection, the round plug connectors, which are equipped with a hexagonal threaded ring M8 ↔ SW 9, M12 ↔ SW13), should be tightened with a special torque wrench.
NORD recommends the use of a commerc refer to the technical data for the tightening torques.

Further documentation (www.nord.com)

BU 0200
=== Ende der Liste für Textmar ke Inhalt ===
SK 2xxE frequency inverter manual
TI 275274507
Connection extension SK TIE4-M12-POW
4 / 4 TI 278910061 - 0814
Loading...