Nolan RemHearLinks NSRXRM3C2RHL User Manual

Bluetooth Wireless

Remote Audio Voice Links

P/N NSRXRM3C2RHL

USER GUIDE

RemHearLinks

.

FCC ID:TNZNSRXRM3C2XXX

0678

Declaration of Conformity. We declare that product
NSRXRM3C2MSX conforms to the R&TTE Directive 1999/5/RC.

INTRODUCTION

Nolan RemHearLinks Bluetooth Wireless Remote
Voice Audio Links with microphone, audio streamer
to help and improve hearing impairments to under­stand more speech over a distance .
Compatible stereo Bluetooth devices must
support the Bluetooth profile known as A2DP
profiles.

GETTING STARTED

Unpack the package carefully and confirm that you
have all of parts as shown below.

※

USB charging cable Sticker

External microphone

RemHearlinks

3.5mm stereo cable

Analog stereo
audio cable

Please check the contents carefully and contact
your local dealer immediately if anything is missing
or damaged.

PRODUCT OVERVIEW

See image below. Please note some models of
RemHearLinks will differ slightly in style, colour and
the functionality may vary according to their specifi­cations.

Omni Mic

Internal Mic
Gain Up

USB Charging Connector

LED

On/Off

Omni /Uni Switch

Uni Mic

Line in and
External Mic Jack

Internal Mic Line in/
External Mic Selection

Line in
Volume Up

Line in
Volume Down
/Mute

Internal Mic
Gain Down
/Mute

CHARGING

Plug the USB charging cable into RemHearLinks
mini USB connector. Plug the other side of the USB
charging cable into a powered USB connector.

When charging, the amber LED will be lighted.
When charging is completed, the amber LED will be
turn off.

or

Important Note: RemHearLinks supports four sets
of pin code: 0000, 1111, 1234, and 8888. It covers
the popular Bluetooth speakers, receivers.

TURN ON

Press and hold the ON/OFF button for about 3
seconds, the blue LED will flashing. Release the
ON/OFF button. If your device 1
has paired with RemHearLinks 1
before, they will reconnect 1
each others automatically.

PAIRING

Press and hold the ON/OFF button for about 3
seconds, RemHearLinks will be turned on and into
pairing mode automatically with blue LED fast
flashes.After the RemHearLinks is in pairing mode,
put your Bluetooth receiver into pairing mode, refer
to your audio receiver’s User Guide.

The audio receiver should find
the RemHearLinks and pair with
it. When pairing is completed, the

blue LED on RemHearLinks will

begin to flash slowly.

Using internal Uni and Omni directional micro­phone

Put RemHearLinks’ microphone close to the sound
source around 8 inches to captured the best sound
quality.

USING MICROPHONE

The RemHearLinks support internal and

external microphone

max. 20cm
8 inches

Too far away

TURN OFF

Press and hold the ON/OFF button for about 2
seconds, the amber LED

1

will stay on for about 1 1
second and then the

1

RemHearLinks will be turn off . 1
Release the ON/OFF button.

Slide the microphone
selection switch to choose
the corresponding internal
microphone.

Unidirectional
(Cardioid) microphone
is used that the target
sound source pick up
directly in front of the
microphone, and all
other sounds from sides
are largely rejected.



Omnidirec­tional microphones will
pick up sound from all
directions or sides
around the microphone.
Users can speak into
any side of the
microphone.



Both unidirectional and omnidirectional
microphones have their advantages and disadvan­tages. The important thing is to know the applica­tion of the microphone in use to know which would
be better for the given situation around.



Using external audio source input: external
microphone, TV or external audio devices

Short press the
input selection
button, RemHear­Links will toggle the
audio input source
between internal
microphone and
externalllla
microphone/audio
device.

When you using internal microphone, the blue LED
will flash up.
When you using external microphone/audio device,
the green LED will flash up instead of blue LED.

Plug the external microphone
into the RemHearLinks audio
jack, and then select the
external microphone/audio
device.

RemHearLinks external microphone

TV or other audio devices audio input

Connect the TV or other audio devices 3.5mm to
RemHearLinks via audio cable, and then select the
external microphone/audio device.
Using 3.5mm audio cable or RCA audio cable
converter to connect AUX or RCA audio output for
TV sound output.

3.5’

TV

or

AUX

AUDIO

OUTPUT

L R

Adjust microphone gain, input audio volume or
mute

The four volume buttons, Mic Gain Up/Down and
external audio Volume Up/Down, provide the
flexible volume tuning functions.

G+ and G- : Single press to increase and
decrease the internal microphone gain.
G-: Press and hold about a second to mute
the internal microphone, the amber LED will flash
slowly. Then press G+ to un-mute
V+ and V- : Single press to increase and
decrease the external microphone or audio sound
volume.
V-: Press and hold about a second to mute
the microphone, the amber LED will flash slowly.
Then press V+ un-mute.









Internal Mic
Gain Up

Internal Mic Line in/
External Mic Selection

Line in
Volume Up

Line in
Volume Down
/Mute

Internal Mic
Gain Down
/Mute

VISUAL INDICATION

The POWER/MODE/AUDIO LED can also indicate
the status of RemHearLinks working statues.

Statues Indication

Charging Amber LED is On

Not Connected

Blue/Green LED very

slow flashes, approx.
every 5 seconds

Connected

Power On
Power Off

Blue/Green LED

slow flashes approx.
every 2 seconds

Pairing mode with
Bluetooth receiver

External audio
source selected

Blue/Green LED

fast flashes

Green LED flashing

Blue LED flash once

Amber LED flash once
Amber LED slow flash,

approx. every 5 seconds

Mute

TROUBLESHOOTING

Please note that you should also be familiar with the
operation of your audio receiver, or other connect­ing Bluetooth device. Please read the User Guide
for your device carefully.

Problem Likely Cause / Solution

RemHearLinks
does not
reconnect.
Lost Connection.

Blue LED flashes

at 5 second
intervals.

Distance between
RemHearLinks and
audio receiver’ out of
range.
Put them closer and turn
on to reconnect again.

RemHearLinks
will not pair with
audio receiver

Ensure that PIN code is
one of these codes:
0000, 1111, 1234, 8888

CUSTOMER SERVICE INFORMATION

For other Nolan Bluetooth products or support,
please view our website – www.nolan-sys.com or
email [e-mail] or contact your local
representative.

ENVIRONMENT

Do not throw this electrical device away with the
normal household waste at the end of its life, but
hand it in at an official collection point for recycling.
By doing this you will help to preserve the environ­ment.

DISCLAIMER

Whilst every effort has been made to ensure that
the information in this manual is accurate and
complete, no liability will be accepted for any errors
and/or omissions made. The manufacturer
reserves the right to make changes and improve­ments to the specifications and features of the
hardware and firmware of the products described in
this document without prior notice. Reproduction,
transfer, distribution or storage of part or all of the
contents in this document in any form is prohibited
without prior permission of the manufacturer. All
trademarks acknowledged.