Nolan N-Com Basickit N32 Safety And Istructions For Use

safety and istructions for use

english

gb

Scheda elettronica base

Leggi le istruzioni di seguito riportate per il suo corretto montaggio e utilizzo.

Basic electronic card

Read the instructions below for proper assembly and use.

Elektronische Schaltkarte

Lesen Sie bitte, zur richtigen Montage und zum ordnungsgemäßen Benutzen
der Karte, die folgenden Anleitungen.

Carte électronique de base

Lire les instructions ci-après pour l'installer et l'utiliser correctement.

Tarjeta electrónica base

Lea las instrucciones a continuación para el correcto uso y montaje.

Placa eletrônica base

Leia as instruções abaixo para a correta montagem e uso.

Elektronische basiskaart

Lees onderstaande instructies voor een correcte montage en gebruik.

ncom n102 0023 10-07-2007 14:10 Pagina 2

Basic electronic card

ENGLISH

N32

17

Congratulations on your purchase of a Nolan N-Com product.
The N-Com Basic Kit was designed and built using the latest technologies and the best materials. Long tests and
thorough system development have made it possible to achieve the highest sound quality.

The N-Com Basic Kit is the basic equipment for one of the communication systems of the Nolan N-Com
product line.
The Basic Kit can only be installed on Nolan helmets preset for N-Com.

1. WARNINGS AND SAFETY

1.1. Reference standards

1.2. Road safety

1.3. Switching on the system in safe

environments

1.4. Appropriate use

1.5. Qualified personnel

1.6. Accessories and batteries

1.7. Disposal

2. NOMENCLATURE

3. INSTALLATION

3.1. Installing the battery (only for Intercom Kit

and Bluetooth Kit).

3.2. Removing the battery (only for Intercom Kit

and Bluetooth Kit).

3.3. Installing the Basic Kit

3.4. Installing and removing the basic card

3.5. Removing the Basic Kit

4. INPUTS FOR CONNECTION OF AUDIO

SOURCES AUDIO

5. USING THE BASIC KIT WITH A CELL PHONE

(N-Com Mobile)

5.1. Answering a phone call

5.2. Making a phone call

5.3. Vocal calls and advanced functions

6. USING THE SYSTEM WITH OTHER AUDIO

DEVICES

6.1. Connection with Multimedia Wire

7. MAINTENANCE

8. LIMITED WARRANTY

8.1. Warranty coverage

8.2. Exclusions and limitations of the coverage

8.3. Validity of the limited warranty

8.4. Procedure for the forwarding of claims

9. WARRANTY REGISTRATION FORM

TABLE OF CONTENTS

N32 000000043 10-07-2007 13:10 Pagina 17

ENGLISH

N32

18

1. WARNINGS AND SAFETY

Read this User Manual carefully, as well as the User Manuals for other N-Com kits that you will be using with the N-Com
Basic kit. Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations.

Caution: The product cannot be used in official or non-official competitions, motordromes, circuits, racing tracks and similar.

Caution: Installation of the N-Com Basic Kit system results in a weight increase of approximately 90 g., which is added to

the weight of the helmet and of the other accessories.

Warning: The electronic components of the N-Com system mounted inside the helmet are not waterproof. Consequently,

make sure the inside of the helmet, including the comfort padding, does not get wet in order to avoid damage to the system.
If it does, remove the N-Com system and the helmet comfort padding and let it air dry. Disconnect the battery connector
and let it dry as well.

1.1. Reference standards

The products of the N-Com line are in compliance with standards as per the table below:

Basic Kit Complies with Directive 89/336/CEE.
Intercom Kit Complies with Directives 73/23/CEE and 89/336/CE.
Bluetooth Kit The Bluetooth system complies with the main safety requirements and other

applicable provisions of Directive 99/5/CE.

Bluetooth is a registered trademark property of Bluetooth SIG, Inc.

1.2. Road safety

Always obey all Traffic Regulations in force. While riding the motorcycle, your hands should always be engaged in actually
riding the vehicle. Any operation to the N-Com system must be carried out with the vehicle stopped.
Specifically:

- Set your cell phone on automatic answer (see the cell phone instructions to do this). If your cell phone is not equipped with
this function, first stop your vehicle in a safe area, in compliance with Traffic Regulations and then answer the call.

- Do not make any calls while riding. Stop your vehicle in a safe place in compliance with Traffic Regulations, and then make
the call.

- Adjust the volume so that it does not cause a disturbance or distraction while riding and at the same time allows you to
distinctively hear background noises.

- Do not handle the cell phone while riding.

- In all cases, obey the Traffic Regulations and remember that riding the motorcycle has absolute priority over any other
maneuver.

1.3. Switching on the system in safe environments

- When using the N-Com system, comply with all limitations and instructions related to the use of cell phones.

- Do not turn on your cell phone or the N-Com system whenever their use is forbidden or when the devices can cause
interference or dangerous situations.

N32 000000043 10-07-2007 13:10 Pagina 18

ENGLISH

N32

19

- Turn off while refueling. Do not use the N-Com system in filling stations. Do not use the device near combustible materi­als or chemical products.

- Turn off in proximity to explosive materials.

1.4. Appropriate use

- Use the device only in the normal position, as described in the product documentation.

- Do not attempt to disassemble, tamper with or modify any part of the N-Com system.

1.5. Qualified personnel

- Only qualified personnel can carry out technical assistance on this product. In case of any malfunction, always turn to your
local dealer.

- The helmet is a safety device. Tampering with it and/or with the electronic system inside the helmet, in addition to invalidating
the product warranty, can also lead to dangerous situations.

1.6. Accessories and batteries

- Only use the type of batteries, battery chargers and accessories approved by Nolan for the specific model.

- The use of a type different from the recommended one may lead to dangerous situations and invalidate the warranty.

- Contact your local dealer to see about the availability of approved accessories.

- When disconnecting the power supply cable of any accessory or of the battery charger, always grab and pull the plug not
the cable.

- Do not use batteries for purposes that are different from the prescribed ones.

- Never use batteries or battery chargers that turn out to be damaged.

- Do not short-circuit the battery.

- Keep the battery at a temperature between 10°C and 35°C.

- Danger of fire or explosion: do not throw the batteries into a fire nor expose them to high temperatures!

- Do not throw out batteries together with household refuse. The batteries should be disposed of in compliance with local
regulations.

1.7. Disposal

Refer to this user manual and to manuals related to other parts of the N-Com system in order to disassemble the system
from the helmet. Once the system has been disassembled, dispose of it according to the following instructions:

- If the product bears the symbol of a crossed-out trash bin, this means that it is covered by European
Directive 2002/96/EC.

- All electric and electronic products must be disposed of separately from the town selective waste
collection, by means of specific waste disposal facilities set up by the government or by local authorities.

- The proper disposal of obsolete equipment contributes to preventing possible negative consequences
on people’s health and on the environment.

- Do not throw the battery out with household waste.

- All batteries as well as electric and electronic components must be disassembled, separated and
taken to specific waste collection centers authorized for waste recycling.

- For more detailed information on the disposal of obsolete equipment, contact your municipality, a
waste disposal service or the store where the product was purchased.

N32 000000043 10-07-2007 13:10 Pagina 19

ENGLISH

N32

21

3. INSTALLATION

3.1. Installing the battery rimozione (only for Intercom Kit and Bluetooth Kit)

1. Position the battery cable (red/black) as shown in figure 1, then position the

battery completely inside its housing by slightly bending the base of the
battery support (Fig 4).

2. Connect the battery cable (Red+Black) to the connector, passing the cables
through as shown in Fig. 5.

3.2. Removing the battery (only for Intercom Kit and Bluetooth Kit)

1. Remove the roll-neck (if fitted ) from the helmet (see specific instructions in

the helmet user manual) using the special zipper located on the left side of
the helmet (Fig. 6).

3.3 Installazione del Basic Kit

1. Remove the roll-neck (if fitted ) from the helmet (see specific instructions in

the helmet user manual) using the special zipper located on the left side of
the helmet (Fig. 7).

FIG. 4

FIG. 5

FIG. 6

FIG. 7

N32 000000043 10-07-2007 13:10 Pagina 21

ENGLISH

N32

20

2. NOMENCLATURE

FIG. 1

FIG. 2

FIG. 3

10-way connector

Microphone

Fastening pin

Basic Kit cable

Protection cover

Basic Kit N32

Set of loudspeakers

Loudspeaker foam N32Basic
electronic
card

N32 000000043 10-07-2007 13:10 Pagina 20

ENGLISH

N32

21

3. INSTALLATION

3.1. Installing the battery rimozione (only for Intercom Kit and Bluetooth Kit)

1. Position the battery cable (red/black) as shown in figure 1, then position the

battery completely inside its housing by slightly bending the base of the
battery support (Fig 4).

2. Connect the battery cable (Red+Black) to the connector, passing the cables
through as shown in Fig. 5.

3.2. Removing the battery (only for Intercom Kit and Bluetooth Kit)

1. Remove the roll-neck (if fitted ) from the helmet (see specific instructions in

the helmet user manual) using the special zipper located on the left side of
the helmet (Fig. 6).

3.3 Installazione del Basic Kit

1. Remove the roll-neck (if fitted ) from the helmet (see specific instructions in

the helmet user manual) using the special zipper located on the left side of
the helmet (Fig. 7).

FIG. 4

FIG. 5

FIG. 6

FIG. 7

N32 000000043 10-07-2007 13:10 Pagina 21

ENGLISH

N32

22

FIG. 8

FIG. 9

FIG. 10

FIG. 11

FIG. 12

2. Take out the rear neck padding and bend it inside the helmet as shown in

the figure without r

emoving the side of the comfort padding from the shell.

(Fig. 8).

3. V

ersions with roll-neck: hold the outside support in one hand and pass the

cable through the slot on the support of the roll neck zipper (Fig. 9-10-11).

V

ersions without roll-neck: pass the cable through as shown in Fig. 12.

N32 000000043 10-07-2007 13:10 Pagina 22

ENGLISH

N32

23

NOTE: The cable DOES NOT have to pass through the hole in the shell.
(Fig. 13).

4. Make sure the fastening pin is in the “OPEN” � position.

5. Position the top hook of the Basic Kit (Fig. 14) in the corresponding groove

in the shell.

6. Line up the pin with the corresponding hole in the shell (Fig. 14).

7. Hook the Basic Kit to the shell and then lock it by turning the fastening pin,
with a coin, to the “CLOSED”

� position (Fig. 15).

8. Glue the sealing trim (supplied with the Bluetooth kit and Intercom Kit) to
the basic kit, as shown in figure 15.

9. Take the loudspeakers set and position the foam protections on the loud­speakers.

10. Prepare the loudspeakers set for assembly, as shown in figure 16).

11. Position the battery support in the special polystyrene housing located in the

rear of the shell (Fig. 17) without pushing it in completely.

FIG. 13

FIG. 14

FIG. 15

FIG. 16

FIG. 17

N32 000000043 10-07-2007 13:10 Pagina 23

ENGLISH

N32

24

12. Connect the Basic Kit cable to the connector located behind the left loud­speaker (Fig. 18).

13. Gently push the tab of the left loudspeaker in its own housing, arranging
the flex cable between the shell and the polystyrene (Fig. 19).
If necessary, widen the shell slightly.

14. Fold the Basic Kit cable and position it under the foam of the loudspeaker.

15. Gently push the loudspeaker until it is properly housed.

16. In the same way, position the right loudspeaker. At the end of this opera-

tion, the helmet should look like the one in the figure (Fig. 20), with the flex
cable between the inner shell and the outer shell.

Position the battery charger cable along the right side of the edge of the
shell.

17. Bend the rear neck area again by passing the black tab of the rear neck
padding through, beyond the battery support and the flex cable (Fig. 21).

18. After it is positioned, push the rear neck padding inside its own housing
(Fig. 22).

FIG. 18

FIG. 19

FIG. 20

FIG. 21

FIG. 22

N32 000000043 10-07-2007 13:10 Pagina 24

ENGLISH

N32

25

19. Make sure the comfort padding is properly positioned at the sides and in the front.

20. If available, replace the roll-Neck (see specific instructions in the helmet user manual).

21. At the end of the installation, make sure the loudspeakers are positioned correctly, as they must be pushed in all the way

in their housing.

Caution: Always check the length of the chinstrap and readjust it as necessary according to specific helmet instructions.

Warning: After installing the Basic Kit inside the helmet, verify that the microphone is positioned correctly in front of your

mouth, adjusting the flexible part accordingly.
When the microphone is not used, you can move it to a more comfortable position. When you receive a call or you need to
use the microphone, stop and reposition it accordingly.

3.4 Installing and removing the basic card

1. Remove the “N-Com” protection cover and position the basic card

on the back. The basic electronic card has a rounded-off corner that
ensures it is always properly inserted in its housing. Make sure all
clips are in place and that the card is flat with the golden contacts
facing up (Fig. 23a - 23b).

2. Repositio n the “N-Com” housing pro tection cover on th e shell.
First insert the front part ad then press the rear until the clips lock
in plac e.

FIG. 23

FIG. 24

FIG. 23a

FIG. 23b

N32 000000043 10-07-2007 13:10 Pagina 25

ENGLISH

N32

26

3.5. Removing the Basic Kit

1. Remove the roll-neck (if fitted).

2. Take out the rear neck padding and bend it inside the helmet without r

emoving the side part of the comfort padding from

the shell (see Fig. 2).

3. Gently remove the loudspeakers and the battery from their housing by disconnecting the connector located behind the
left loudspeaker.

4. Turn the fastening pin clockwise until it is in the “OPEN” position and release the Basic Kit from the shell by passing
the cable through.

5. Replace the comfort padding (see specific instructions in the helmet user manual) and reposition the roll-neck on the helmet.

4. INPUTS FOR AUDIO SOURCES CONNECTION

The Basic Kit is equipped with two connectors that house the cables for connection with devices that can be used with the
N-Com system.

- 3.5 mm connector

(Fig. 25 - IN): Audio input.
This can be used to connect a cell phone (using the Mobile Wire
accessory described in par. 6) or an audio source (MP3 player, GPS
navigators, bike-to-bike radio, etc…) by using the specific Multimedia
Wire (see par. 6).

- 2.5 mm connector (Fig. 25 - OUT): Audio output.
This is used to connect the pilot’s helmet to the passenger’s helmet
when installing an Intercom Kit or Bluetooth Kit.

5. USING THE BASIC KIT WITH A CELL PHONE (N-Com Mobile)

The N-Com systems are preset for connection to a cell phone. By separately purchasing an N-Com connection cable, specific
for your cell phone model, you can use the N-Com system as a simple earphone.

Note: Due to the varying strength of the network signal, there may be interferences in the wire connections which do not
depend on the N-Com system or the cable used.

Note: In order to use the Basic Kit together with an N-com Intercom Kit or N-com Bluetooth Kit system, please refer to the
specific instructions provided with these systems. In fact, in addition to the basic functions illustrated below, the N-com
Intercom Kit or N-com Bluetooth Kit systems offer additional functions specific to these systems.

Note: The N-Com Mobile operation requires that the helmet be equipped with the Basic Kit and that the basic electronic
card be inserted in the proper housing.

Caution: Listening to other devices must not interfere with driving the vehicle, which has absolute priority. All maneuvers on

electronic devices and on the N-Com system must be carried out with the vehicle stopped, in compliance with Traffic
regulations.

FIG. 25

IN OUT

ENGLISH

N32

27

Caution: Cell phones are equipped with their own volume adjustment. Adjust the cell phone volume levels so as to obtain

the desired volume prior to using the system while riding.

Caution: Listening at a very high volume may distract you from riding your vehicle and create dangerous situations or limit

the ability to hear background noises.

1. Connect the Mobile wire to the INPUT connector (3.5 mm jack).

2. Connect the Mobile wire to the cell phone.

3. Make sure that the cell phone displays the icon that signals connection to an earphone.

5.1. Answering a phone call

- Automatic answer
Preset your cell phone for automatic answer when it is connected to an earphone. When a call comes in, you can talk
through the Basic Kit microphone.

- Manual answer
If your cell phone is not equipped with an automatic answering function, stop the vehicle in a safe place, in compliance
with Traffic Regulations. Then answer your call normally and speak through your N-Com helmet.

Caution: Do not answer any calls while riding.

5.2. Making a phone call

Stop your vehicle in a suitable place in compliance with Traffic Regulations and make the phone call as you would normally
with your cell phone. Once the phone call is sent, communication switches directly to the helmet.

Caution: Do not make any calls while riding.

5.3. Vocal calls and advanced functions

Some cell phones allow vocal calls or other functions using vocal commands by using a “magic word”. If your cell phone is
equipped with this function, you can send a vocal command or function simply by saying the magic word previously
recorded.

Note: If the cell phone allows it, it is better to record vocal commands directly from the helmet.
This will facilitate recognition of the vocal command when the command is given directly from the helmet.

6. USING THE SYSTEM WITH OTHER AUDIO DEVICES

The N-Com system is preset for listening to different audio devices, which can be connected by means of the Multimedia
wire (sold separately).
You can listen to an MP3, an FM radio, or connect to a satellite navigation system, etc. by using the 3.5 mm output that
these devices are generally equipped with for earphone purposes.

Caution: In compliance with Traffic Regulations, listening to other devices must not interfere with driving the vehicle, which

has absolute priority. All maneuvers on electronic devices and on the N-Com system must be carried out with the vehicle
stopped, in conformity with applicable Traffic regulations.

N32 000000043 10-07-2007 13:10 Pagina 27

ENGLISH

N32

28

Caution: Setting the volume at a very high level may distract you from riding the vehicle and cause dangerous situations or in

any case limit your ability to hear background noises. Adjust the volume to a suitable level prior to using the system while riding.

6.1 Connection with Multimedia Wire

Connect the 3.5 mm 4-pole connector of the Multimedia wire to the input connector (IN - see Fig. 26). Connect the other
end of the Multimedia wire to the audio device.
If the multimedia wire features a red band, this band is near the connector to be hooked into the audio device.

To view the entire range of N-Com products, the possible configurations and compatibility, visit: www

.n-com.it

7. MAINTENANCE

The N-Com does not require any special maintenance tasks.
In case you use the kit when it rains, remove the e-box from its housing and dry it with warm air. Wipe dry the outside of the
helmet when wet, especially in the contact area.
In case the kit gets wet several times, rust or corrosion may form, thus hindering the electrical contact.
In these cases, it is recommended to clean the contacts of the socket on the shell and on the e-box, using alcohol or another
antirust product.

8. LIMITED WARRANTY

With this LIMITED WARRANTY CERTIFICATE, Nolan

®

warrants this Product to be free from defects in material and workmanship

at the time of its original purchase by the buyer.

We invite you to:

- Read the cautions pertaining to safety and proper use.

- Read the warranty terms and conditions.

- a) Keep the originals sales receipt. This must be shown in case of repairs covered by warranty. In these cases, the product

has to be taken back to the dealer where it was purchased.

8.1 Warranty coverage

If any defect covered by this limited warranty certificate is discovered within 2 (two) years from the purchase date shown on
the tax receipt, Nolan

®

shall repair or replace the defective product through its distribution network after having verified the

defect. Nolan

®

shall supply all the material and labor that is reasonably required to remedy the defect, except in those cases
where the damage is caused by one of the items listed in the following paragraph “Exclusions and limitations of the
Coverage”.

8.2 Exclusions and limitations of the coverage

This warranty only covers defects in materials and manufacturing. Nolan

®

shall not be considered responsible for product

defects that can be attributed, either partially or in full, to any other cause, including but not limited to:

a) Defects or damages resulting from using the Product in conditions that differ from the usual ones.

N32 000000043 10-07-2007 13:10 Pagina 28

ENGLISH

N32

29

b) Damages caused by improper use not conforming with normal operation in accordance with the product operating and

maintenance instructions provided by Nolan

®

.
c) Negligence and normal wear of internal and external parts.
d) Any damage caused by an accident;
e) Any change or modification made to the helmet or to the N-com system by the user or by third parties.
f) Color changes or damages caused by exposure to harmful chemical products.
g) The use of incompatible accessories that are not part of the N-Com product range.
h) Moreover, the warranty does not cover product defects caused by fortuitous events, modifications or adjustments,

causes of force majeur or damages deriving from the product coming in contact with liquids.

i) The internal helmet components are not and cannot be waterproof. Consequently, any improper exposure to rain,

humidity, food spillages or other liquids can result in damages to the N-Com electronic devices, damages for which
Nolan shall not be responsible.

j) This warranty does not include those parts subject to wear and tear such as, for example, the rechargeable battery and

the cables used for connection between the various N-Com systems or between the N-Com systems and other devices.

k) Since Nolan

®

does not supply the system on which the cell phones work, it shall not be responsible for the operation,

availability, coverage, services or range pertaining to the aforementioned system.

l) Whenever the product is used in conjunction with accessories or equipment not supplied by Nolan

®

, Nolan®shall not
guarantee proper operation of the product/device combination, nor will it accept requests for repairs or replacements
under warranty in case the product is used in such a way.

m) Nolan

®

shall not be responsible in case the product presents limited capabilities due to the operating mode of cell phones

or of other accessories or equipment not supplied by Nolan®.

n) Tampering with the internal electronic card or with other parts of the N-Com system shall invalidate the warranty.
o) Moreover, the defects covered by this warranty do not include all those specific and subjective situations that may come

up during the active use of the helmet such as, for example, comfort problems while riding or aerodynamic noises.

Nolan

®

shall not be held responsible in any case for incidental or consequential damages (including, without any limitation
whatsoever, damages to one or more persons) resulting from non-fulfillment of the obligations arising from this warranty as
it pertains to Nolan

®

products.

8.3 Validity of this limited warranty

This warranty is valid only if the enclosed warranty form is duly and completely filled out with the following information:

1) Product name.

2) Name and stamp of the authorized dealer.

3) Product purchase date.

4) Buyer’s name and address.

Nolan

®

reserves itself the right to not carry out repairs under warranty if the aforementioned information is removed or

modified after the original purchase of the product from the dealer.

ENGLISH

N32

30

8.4 Procedure for the forwarding of claims

To forward a claim covered by this warranty, the buyer has to directly notify the dealer where the helmet was purchased with
regards to the defect, presenting at the same time the defective product, a copy of the sales receipt and the Warranty reg­istration form, duly filled out as instructed above.

PRIOR TO CONTACTING THE DEALER, WE RECOMMEND THAT YOU READ CAREFULLY THE USER MANUAL
ENCLOSED WITH THE PRODUCT.
AFTER 2 (TWO) YEARS FROM THE DATE OF PURCHASE, THIS LIMITED WARRANTY IS VOID FOR ALL EFFECTS AND
PURPOSES.

Repairs or maintenance under warranty do not extend the period of the warranty itself. Therefore, in case the product or one
of its components is replaced, this does not initiate a new warranty period, as the purchase date of the original product shall
be taken into account for warranty purposes.
Only for repairs or replacement of electronic components, in the event that Nolan

®

proceeds to repairing or replacing the
product, said product shall enjoy a warranty period equal to the residual portion of the original warranty or ninety (90) days
from the repair date (the longer period being considered).
The repair or replacement can be carried out even with regenerated components with equivalent functions.
The replaced parts or components shall become property of Nolan

®

.

THIS WARRANTY VOIDS AND REPLACES ANY OTHER WRITTEN OR VERBAL WARRANTIES PROVIDED FOR BY THE
LAW THAT CAN BE DEROGATED AT THE PARTIES’ WILL; SPECIFICALLY, NOLAN

®

DOES NOT GRANT SPECIFIC
WARRANTS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL NOLAN BE LIABLE FOR INCIDEN­TAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL DAMAGES,
TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY THE LAW.
NOLAN

®

RESERVES ITSELF THE RIGHT TO MODIFY, AT ANY TIME AND WITHOUT ADVANCE NOTICE, THE PRODUCT

CHARACTERISTICS, FUNCTIONS, COMPATIBILITY AND SOFTWARE.

Some Countries do not allow the exclusion or limitation of incidental or consequential damages, or the limitation of the
duration of implied warranties; as a result of this, the previous limitations and exclusions may not be applicable to you.
This warranty does not have any effect on the customer’s legal rights under the national jurisdiction in force or on the
consumer’s rights towards the dealer sanctioned by the purchase/sale contract.

This warranty is valid throughout the European territory, and it represents the only express warranty provided by Nolan

®

in
relation to the sale of its own products. This warranty does not affect the rights to which the buyer is entitled and which are
expressly provided for by Directive 1999/44/CE.
This warranty does not affect the consumer’s rights provided for by the law, and specifically by the provisions of Legislative
Decree 2 February 2002 n. 24.

N32 000000043 10-07-2007 13:10 Pagina 30