Nokia Customer Care
6235/6235i/6236i (RM-60)
Mobile Terminals
Issue 1 04/2005 Company Confidential ©2005 Nokia Corporation
Disassembly/Assembly
6235/6235i/6236i (RM-60)
Disassembly/Assembly
Page 2 ©2005 Nokia Corporation Company Confidential Issue 1 04/2005
Contents Page
Safety Information......................................................................................................................................... 3
ESD Protection................................................................................................................................................. 3
Assembly Instructions ................................................................................................................................... 4
Disassembly Instructions.............................................................................................................................. 4
1. Prepare the phone ..................................................................................................................................4
2. Remove the Battery Cover (C-cover) ................................................................................................4
3. Remove the A-cover ..............................................................................................................................5
4. Place Protective Film .............................................................................................................................5
5. Remove the Screws ................................................................................................................................ 6
6. Remove the PWB Assembly .................................................................................................................6
7. Separate the LCD Display from the PWB ......................................................................................... 7
8. Remove the Earpiece ............................................................................................................................. 7
9. LCD Display Disassembly ......................................................................................................................8
10. Remove the Camera from PWB ........................................................................................................ 8
11. Remove the Volume Key .....................................................................................................................9
12. Remove the Vibra, Microphone, and DC Jack ..............................................................................9
13. Remove the UHJ Sliding Cover .......................................................................................................10
14. Remove the Power Key .....................................................................................................................10
15. Remove the Infrared Lens ................................................................................................................11
16. Remove the Antenna/IHF Speaker .................................................................................................11
17. Remove the SIM Cover .....................................................................................................................12
Nokia Customer Care Disassembly/Assembly
6235/6235i/6236i (RM-60)
Issue 1 04/2005 ©2005 Nokia Corporation Company Confidential Page 3
Safety Information
Adhere to the following guidelines when assembling and disassembling the phone.
•QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
• ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect incompatible
products.
• CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
ESD Protection
Nokia requires that phone repair centers have sufficient ESD protection against static
electricity when servicing cellular phones. Use the following guidelines:
• A cellular phone that is ready for use can be handled normally without ESD
protection. The battery can be replaced in normal conditions of use.
• Use ESD protection when replacing a color cover, except for the phone covers
which can be replaced by the customer.
• All electronic parts of the phone, including the display, are susceptible to ESD.
Resistors also can be damaged by static electricity discharge.
• All ESD-sensitive parts must be packed in metallized protective bags during
shipping and handling outside any ESD Protected Area (EPA).
• Every repair action involving opening the phone or handling the phone
components must be done under ESD protection.
• ESD-protected spare part packages MUST NOT be opened/closed outside an EPA.
For more detailed information about ESD protection and EPAs, contact your local Nokia
Customer Care representative.
6235/6235i/6236i (RM-60)
Disassembly/Assembly
Page 4 ©2005 Nokia Corporation Company Confidential Issue 1 04/2005
Assembly Instructions
To assemble the mobile terminal, follow the "Disassembly Instructions" in reverse order.
Disassembly Instructions
Use the following steps to disassemble the phone.
1. Prepare the phone
A. Turn the phone off.
B. Gently place protective film on display (outside) to prevent scratches.
2. Remove the Battery Cover (C-cover)
A. Push down on the release button, and slide the C-cover away from the phone.
B. Remove the battery.
Protective Film
B-cover
Release button
Loading...