Nokia 1325, RH-104 Service Manual

Page 1
Nokia Customer Care
1325 (RH-104)
Mobile Terminal

Technical Summary

Issue 1 04/2007 Company Confidential © 2007 Nokia Corporation
Page 2

Contents Page

Introduction............................................................................................................... 3
Sales Package ..................................................................................................4
Supported Accessories......................................................................................4
Exploded View.......................................................................................................... 5
Assembly Parts List...........................................................................................6
Baseband Module Overview.................................................................................... 7
QSC6010TM.......................................................................................................7
Flash Memory....................................................................................................8
RF Module Overview................................................................................................ 9
Transmitter........................................................................................................9
Receiver............................................................................................................9
Page 2 © 2007 Nokia Corporation Company Confidential Issue 1 04/2007
Page 3
1325 (RH-104)
Nokia Customer Care Technical Summary

Introduction

The Nokia 1325 mobile terminal offers a CDMA single band engine and includes the following features:
Model Type Frequency(MHz) GPS Module
1325 RH-104 800 No
z 800MHz, IS95, CDMA2000 1xRTT z 96 x 65 pixel color display with 65K colors z Removable User Information Module (RUIM), disabled in non-RUIM markets z Internal antenna z Internal vibra z EVRC Vocoder z 32 polyphonic MIDI ringtone and 30 pre-loaded ringtones z Predictive text z Speakerphone z 4-way navigation key for easy navigation z Calendar, alarm clock, calculator, stopwatch, countdown timer and voice memo z 3 pre-loaded games and 5 pre-loaded screensavers z Downloadable ringtones and wallpapers via BREW
Issue 1 04/2007 © 2007 Nokia Corporation Company Confidential Page 3
Page 4
Parameter Value and Unit
BL-4C
Talk time Standby time
Dimensions:
Volume Length Width Thickness Weight
Up to 210 minutes Up to 168 hours
57 cc 104 mm
42.7 mm
15.0 mm 72 grams (w/ battery)

Sales Package

Name Type
Transceiver RH-104 Standard Battery (860 mAh Li-Ion) Charger AC-3 Headset HS-9 Product literature, user guide and quick start guide Carrier specific literature
BL-4C

Supported Accessories

Type Name
AC-3 Compact Charger AC-4 Travel Charger DC-4 Car Power Adapter ACP-12 Travel Charger AC-5 Charger CA-44 Charger Adapter HS-9 CDMA 2.5mm headset BL-4C (860mAh) Battery
Page 4 © 2007 Nokia Corporation Company Confidential Issue 1 04/2007
Page 5
Nokia Customer Care Technical Summary

Exploded View

A Cover Sub-Assy (A1)
A Cover Sub-Assy (A1)
I001
I001
Keymat
Keymat
I003
I003
Screw (T1.8X3.0)
Screw (T1.8X3.0)
I004
I004
Screw (T1.8X4.5)
Screw (T1.8X4.5)
I005
I005
Keymat Shielding
Keymat Shielding
I008
I008
Domesheet
Domesheet
I009
I009
Shielding Cover
Shielding Cover
I011
I011
Earphone Jack Assy (A2)
Earphone Jack Assy (A2)
I015
I015
Vibrator (A2)
Vibrator (A2)
I016
I016
DC Jack (A2)
DC Jack (A2)
I017
I017
D-Cover Blank (A2)
D-Cover Blank (A2)
I012
I012
Battery Cover
Battery Cover
I021
I021
1325 (RH-104)
Receiver (Earpiece) (A1)
Receiver (Earpiece) (A1) I002
I002 Screw (T1.8X4.5)
Screw (T1.8X4.5) I005
I005 LCD Module Shielding Assy
LCD Module Shielding Assy I006
I006 LCD Module
LCD Module I007
I007
Engine Module (not supplied)
Engine Module (not supplied) I010
I010 Speaker (A2) (A3)
Speaker (A2) (A3)
I013
I013
Antenna (A2) (A3)
Antenna (A2) (A3)
I014
I014
Lanyard Rubber (A2)
Lanyard Rubber (A2)
I018
I018
Speaker Mesh (A2)
Speaker Mesh (A2)
I019
I019
Type Label (Level 3/4 only)
Type Label (Level 3/4 only) I020
I020
A1 = A COVER ASSY
A1 = A COVER ASSY A2 = D COVER ASSY
A2 = D COVER ASSY A3 = SAM MODULE
A3 = SAM MODULE
= ONLY AVAILABLE AS
= ONLY AVAILABLE AS
ASSEMBLY
ASSEMBLY
Issue 1 04/2007 © 2007 Nokia Corporation Company Confidential Page 5
Page 6

Assembly Parts List

Qty Description CCT Code
1 A Cover Sub-Assy I001 1 Receiver (Earpiece) I002 1 Keymat I003 2 Screw (T1.8 x 3.0) I004 4 Screw (T1.8 x 4.5) I005 1 LCD Module Shielding Assy I006 1 LCD Module I007 1 Keymat Shielding I008 1 Domesheet I009 1 Engine Module I010 1 Shielding Cover I011 1 D Cover Assy I012 1 Speaker I013 1 Antenna I014 1 Earphone Jack Assy I015 1 Vibrator I016 1 DC Jack I017 1 Lanyard Rubber I018 1 Speaker Mesh I019 1 Type Label I020 1 Battery Cover I021
Page 6 © 2007 Nokia Corporation Company Confidential Issue 1 04/2007
Page 7
1325 (RH-104)
Nokia Customer Care Technical Summary

Baseband Module Overview

The mobile terminal uses a CDMA single mode engine (Cellular/ 800) with Qualcomm baseband consisting of two ASICs:
z Qualcomm Single Chip 6010 z 64Mb Flash memory with 16Mb of Psram memory
QSC6010
TM
The QSC6010 device represents QCT’s next generation of chipset architecture and enhancements for voice and entry-level multimedia handsets by integrating Mobile Station Modem (MSM) baseband, radioOne RF, and power management functionality into a single 15 mm x 15 mm mini scale package (MSP). Together these functions perform all of the signal processing and power management tasks within a subscriber unit. This enables reduced handset
TM
complexity, cost, time to market, and board-space requirements while providing many features and functionalities.
The QSC6010
TM
device integrates a mixed-signal baseband chip that enables manufacturers to meet or exceed the specifications of mobile stations for worldwide cdmaOne and 3G CDMA systems, including IS-95-A, IS-95-B, IS-2000 1x Release 0.
Subsystems within the QSC6010
TM
device include a CDMA processor, a DFM processor, QCT’s QDSP4000™ DSP for voice compression, PLL and an ARM® ARM926EJ-S™ microprocessor. Also integrated in the QSC6010
TM
device are an audio voice codec and analog interfaces for the radioOne RF ASICs. Controllers for an R-UIM, GPIOs, and peripheral interfaces complete the system integration.
The QSC6010
TM
device integrates all low-cost wireless handset power management, general housekeeping, and user interface support functions into a single mixed signal IC. Its versatile design is suitable for low-cost CDMA handsets.
The power management portion accepts power from common sources – battery, external charger or adapter – and generates all the regulated voltages needed to power the appropriate handset electronics. It monitors and controls the power sources, detecting which sources are applied, verifying that they are within acceptable operational limits, and coordinates battery recharging while maintaining the handset electronics supply voltages. On-chip voltage regulators generate nine
Issue 1 04/2007 © 2007 Nokia Corporation Company Confidential Page 7
Page 8
programmable output voltages using low dropout voltage regulators, all derived from a common trimmed voltage reference.

Flash Memory

The Simultaneous Read/Write architecture provides simultaneous operation by dividing the memory space into 4 banks, which can be considered to be four separate memory arrays. The device can improve overall system performance by allowing a host system to program or erase in one bank, then immediately and simultaneously read from another bank with zero latency.
This device requires a single 3.0 volt power supply for both read and write functions. Its command set is entirely compatible with the JEDEC single-power-supply Flash standard.
Page 8 © 2007 Nokia Corporation Company Confidential Issue 1 04/2007
Page 9
1325 (RH-104)
Nokia Customer Care Technical Summary

RF Module Overview

The RF module receives and demodulates the radio frequency signals from the base station and transmits the modulated RF signals to the base station. It communicates between QSC6010 , PA and Antenna.

Transmitter

The transmitter module is a baseband -to- RF module, an integral component of QUALCOMM’s QSC6010 chipset. All radioOne ICs are highly integrated and fulfill CDMA2000 standard. Overall radioOne performance depends on the combined, complementary performance of all the ICs in the chipset.
The transmitter module in the QSC6010 provides the Zero-IF transmit signal path for Cellular-CDMA transmission. For this module, Cellular-CDMA refers to band classes 0 as defined by the cdma2000 standard, with mobile station transmitters operating between 824 and 849 MHz. The transmit signal path includes baseband amplifiers, quadrature upconversion, gain control RF amplification, and an output driver amplifier.

Receiver

The receiver module is an RF-to-baseband module, an integral component of QUALCOMM’s QSC6010 chipset. All radioOne ICs are highly integrated and fulfill CDMA2000 standard. Overall radioOne performance depends on the combined, complementary performance of all the ICs in the chipset.
The receiver module in the QSC6010 provides the Zero-IF receiver signal path for Cellular-CDMA reception. For this module, Cellular-CDMA refers to band classes 0 as defined by the cdma2000 standard, with mobile station receivers operating between 869 and 894 MHz. The Rx signal path includes the LNA, quadrature downconversion, and baseband functions.
Issue 1 04/2007 © 2007 Nokia Corporation Company Confidential Page 9
Page 10
This page intentionally left blank.
Page 10 © 2007 Nokia Corporation Company Confidential Issue 1 04/2007
Loading...