DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
this RM-43 product is in compliance with
the essential requirements and other
A copy of the Declaration of Conformity can be found at http://www.nokia.com/
phones/declaration_of_conformity/
The crossed-out wheeled bin means that within the European Union the
product must be taken to separate collection at the product end-of-life.
This applies to your device but also to any enhancements marked with
this symbol. Do not dispose of these products as unsorted municipal
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or
registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Microsoft, Windows, and Media Pleyer are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
relevant provisions of Directive 1999/5/EC.
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information, including that related to
promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this document
without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by a pplicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents o f this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC / INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the device
on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information.
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. Press the as many times as
needed to clear the display and return to the
standby mode. Enter the emergency number,
then press . Give your location. Do not
end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900/1800/1900 and UMTS 2100
networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
When taking and using images or video clips, obey all laws
and respect local customs as well as privacy and
legitimate rights of others.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
Network Services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For instance,
some networks may not support all language-dependent
characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order and
icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail and content downloading via
browser or over MMS, require network support for these
technologies.
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
Enhancements, batteries, and
chargers
Always switch the device off and disconnect the charger
before removing the battery.
Removing the battery before switching off the device may
corrupt the hard drive.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3 and AC-4 charger and from
an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or
LCH-12 charger when used with the charger adapter
CA-44.
The battery intended for use with this device is BL-5C.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Congratulations on your purchase of the Nokia N91. Your
device combines stereo sound, storage capacity for up to
6000 songs, over-the-air music downloads, access to your
music collection and smartphone functionality with Wi-Fi
Your Nokia N91 8GB
and 2Mpix camera.
Hard drive
Your device is equipped with a 8 GB hard drive providing
high capacity of storage room for different kind of files.
Sensors in the device will stop the hard drive if the
operating temperature is too low or too high, if the device
is dropped, or if the back cover of the device is removed.
Hard drives are fragile components that must be handled
with care. All impacts caused by shock, vibration,
bumping, and dropping or other mishandling of the
device, as well as extreme temperatures, humidity and
liquids, may cause the hard drive to malfunction and data
to be lost or corrupted.
Do not remove the back cover when the device is switched
on.
Leaving applications running in the background increases
the demand on battery power and reduces the battery life.
To close applications running in the background, press and
hold to show open applications, scroll to an
application, press , and select Yes to confirm.
To view what types of data you have in the device and how
much memory the different data types consume, press
, and select Tools > Hard drive. Select Options >
Memory details and scroll down to Free memory to view
the amount of free memory in the device.
Memory low—free memory
The device notifies you if the memory is getting low. If the
device memory starts to get low when your browser is
open, then the browser is closed automatically to free
some memory space.
To free device memory, transfer data to the hard drive in
File mgr.. Mark files to be moved, select Options > Move
to folder > Hard drive, and select a folder.
Tip! To free memory from the device, use Image Store
available in Nokia PC Suite to transfer images, and
video clips to a compatible PC. See the CD-ROM
supplied in the sales package.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox, Drafts, and Sent folders in
Messag.
• Retrieved e-mail messages from the phone memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
•Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 114.
• Any other data that you no longer need
Essential indicators
—The phone is being used in a GSM network.
(network service)—The phone is being used in a UMTS
network. See ‘Network’, p. 111.
—You have one or more unread messages in the Inbox
folder in Messag..
You have received new e-mail in the remote mailbox.
—T he re are me ss ages wait in g to be se nt in the Outbox
folder. See ‘Outbox—messages waiting to be sent’, p. 48.
—You have missed calls. See ‘Voice calls’, p. 31.
—Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off. See ‘Profiles—Set tones’, p. 28.
—The phone keypad is locked. See ‘Keypad lock
(keyguard)’, p. 17.
—You have an active clock alarm. See ‘Clock’, p. 15.
—The second phone line is being used. See ‘Call
settings’, p. 102.
—All calls to the phone are diverted to another
number. If you have two phone lines, the divert indicator
for the first line is and for the second .
—A headset is connected to the phone.
—A data call is active.
—A GPRS or EDGE packet data connection is available.
—A GPRS or EDGE packet data connection is active.
—A GPRS or EDGE packet data connection is on hold.
These icons are shown instead of the signal strength
indicator (shown in the top left corner in the standby
mode). See ‘Packet data connections in GSM and UMTS
networks’, p. 103.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See ‘Wireless LAN’, p. 95.
A wireless LAN connection is active in a network
that has encryption.
Your Nokia N91 8GB
A wireless LAN connection is active in a network that
does not have encryption.
—A USB connection is active.
—You have an e-mail that has been read, waiting for
you to retrieve to your phone.
—You have an e-mail that has not been read, waiting
for you to retrieve to your phone.
Nokia support on the Web
Check http://www.nokia.com/support or your local Nokia
Web site for the latest version of this guide, additional
information, downloads, and services related to your
Nokia product.
Help
Your device has context-sensitive help. You can access the
help from an application or from the main menu.
When an application is open, to access help for the current
view, select Options > Help.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools > Help.
Select the desired application to view the help topics. To
search for help topics using keywords, select Options >
Search by keyword.
When you are reading a help topic, to view other related
topics, scroll left or right with the joystick.
Tutorial
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My Own > Tutorial and the section
you want to view.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, the
sign is shown.
To turn off the alarm, select Stop. When the alarm tone
sounds select Snooze to stop the alarm for five minutes,
after which it resumes. You can do this a maximum of five
times.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Clock > Options >
Settings.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your phone (network
service), scroll down, and select Network operator time >
Auto-update. For the Network operator time setting to
take effect, the phone restarts.
To change the alarm tone, scroll down, and select Clock
alarm tone.
Your Nokia N91 8GB
World clock
Open Clock, and scroll right to open the world clock view.
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. Enter
the first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Select a city. You can add a maximum of 15 cities to the
list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your phone is changed
according to the city selected. Check that the time is
correct and matches your time zone.
To increase or decrease the volume level, when you have
an active call or are listening to a sound, press and hold
or on the left side of the device.
The built-in loudspeaker allows you to speak and listen to
the phone from a short distance without having to hold
the phone to your ear, for example, having it on a table
nearby. Sound applications use the loudspeaker by
default.
Your Nokia N91 8GB
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
To locate the loudspeaker, see ‘Keys and parts’ in the
Quick start guide.
To use the loudspeaker during a call, start a call, and select
Options > Activate loudsp..
To turn off the loudspeaker when you have an active call
or are listening to a sound, select Options > Activate
handset.
Before connecting a device other than original Nokia
headphones to the headphone connector of your Nokia
N91, adjust the volume level to less than half to prevent
sound distortion or damage to the external device. Then
you can readjust the volume to the appropriate level.
With some headsets you can only adjust the volume with
the volume keys of the headset. If you use the volume keys
of the device, the volume changes only after you detach
the headset.
File manager
Many features of the phone use memory to store data.
These features include contacts, messages, images, ringing
tones, calendar and to-do notes, documents, and
downloaded applications. The free memory available
depends on how much data is already saved in the phone
memory.
To browse files and folders in the device memory or hard
drive, press , and select Tools > File mgr.. Scroll right
to view the hard drive contents.
To move or copy files to a folder, press and press the
joystick at the same time to mark a file, and select Options
> Move to folder or Copy to folder.
Many different file formats can be opened directly from
File manager. However, to get the full functionality you
should open the file in the corresponding application, not
in File manager.
To find a file, select Options > Find , select the search
location and enter the text that matches the file name.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the content of the device
memory and hard drive of your phone. See the CD-ROM
supplied in the sales package.
Keypad lock (keyguard)
To lock: Move the lock switch on top of the device next to
the power key, to the left. When you move the switch
when the slide cover is closed, all the keys are locked.When
you open the slide cover, all the keys are active.
To unlock: Move the switch to the right.
When the keypad lock is on, calls still may be possible to
the official emergency number programmed into your
device. Enter the emergency number, and press .
Music player supports files with extensions AAC, AAC+,
eAAC+, MP3, WMA, MP4, M4A and DCF. Music player
does not necessarily support all features of a file format
Music player
or all the variations of file formats.
For more information on player, select Options > Help for
context sensitive help.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Play a song
1 Press , and select Music.
2 Move the joystick to navigate to a preferred song,
artist or other category and press the joystick to open
category lists.
3 Press Play/Pause key to play the selected song or
list of songs.
To open the Now playing view of the player from any
other view, press the Music access key. To return to
previous view, press it again.
To select more music to play in Now playing view, select
—Press to go to the next song. To fast forward, press
and hold.
—Press once to return to the beginning of the song. To
skip to the previous song, press within two seconds after a
song has started. To rewind through the song, press and
hold.
—Press to decrease volume. Located on the left side of
the device.
—Press to increase volume. Located on the left side of
the device.
To lock all the keys of the device, slide the lock switch on
top of the device.
Tip! You can also use the keys on the remote to
control the device. The lock switch on the side of the
remote control only locks the keys of the remote
control.
Indicators
Icons in Music player:
—Repeat one
—Repeat all
—Shuffle on
—Loudspeaker muted
(displayed in volume popup)
Play modes
Shuffle play
1 To switch random play on or off, select Options >
Shuffle.
2 Select Off or On. The Now playing view is displayed
with or without the shuffle icon in top right corner.
Repeat play
1 To repeat the current song, all songs, or to switch
repeat off, select Options > Repeat.
2 Select Off, All, or Repeat song. The Now playing view
is displayed with or without the repeat all or
repeat song icon in the top right corner.
Modify sound
Equalizer
To modify the tone of the music playback, select Options
> Equaliser.
To use one of the preset equalizer settings, select it with
the joystick, and select Activate. Each preset has different
settings on a 8–band graphic equalizer.
Modify equalizer presets
1 To create a new preset, select Options> New preset.
To modify an existing preset select Options > Edit.
2 To adjust the frequency settings, move the joystick to
the left or right to select low, mid, or, high frequency
and up or down to increase or decrease the volume of
the selected frequency band.
3 To reset the settings to their original values, select
Options > Reset to defaults.
To delete a preset, scroll to it, and press . The default
presets cannot be deleted.
Audio settings
To modify the balance and stereo image or to enhance
bass, select Options > Audio settings.
1 In Music menu, select Options > Go to Music shop.
(This option is not available if music service Web
address has not been defined. See ‘Music shop
Music player
settings’, p. 20)
2 Choose from the options on the screen to search,
browse, or select ringing tones.
Music shop settings
The settings may also be predefined and not editable.
You must have valid Internet connections in order to use
this service. For more details, see ‘Access points’, p.104.
The availability and appearance of music shop settings
may vary.
You also must have the Web address of the music shop
defined in music shop settings.
To change or define the Web address for the music shop,
in Music menu, select Options > Go to Music shop.
(Music shop may also be available as a separate shortcut
in Operator folder.)
In Music shop, select Options > Settings. Define the
following:
Address:—Enter the Web address of the music shop
service.
Default access point:—Select whether to connect
automatically or ask before connecting. Only available
with WLAN.
User name:—Enter your user name for music shop. If this
field is left empty, you may have to enter your user name
at login.
Password:—Enter your password for music shop. If this
field is left empty, you may have to enter your password at
login.
Transfer music
You can transfer music from a compatible PC or other
compatible devices using a USB cable or Bluetooth
connection. For details about connecting your device, see
‘Connectivity’, p.90.
The requirements of the PC:
• Windows® XP operating system (or later)
• a compatible version of Windows Media® player
application. You can get more detailed information
about Windows Media player compatibility from the
N91 section of the Nokia Web site.
• Nokia PC Suite 6.7 or later. The sofware is available for
installation on the sales package CD-ROM.
You can use three different methods to transfer files:
• To view your device on PC as an external hard drive
where you can transfer any data files, make the
connection with cable or Bluetooth connectivity. If you
are using the DKE-2 USB cable, select Data transfer as
the connection method in your device. This method
gives you total control of what you move and where,
but you cannot see all the file information. You may not
be able to transfer material that has been protected
against copying. To refresh the Library after you have
updated the song selection in your device, go to Music
menu, and select Options > Refresh Music library.
• To synchronise music with Windows Media player,
attach the USB cable and select Media player as the
connection method. This method is good if you want to
synchronise all or some of the music files between a
compatible PC and your device.
• To use Nokia Music Manager in Nokia PC Suite, attach
the DKE-2 USB cable and select PC Suite as the
connection method.
USB cable connection
Connect the DKE-2 USB cable to a compatible PC and your
device. If you are using Windows XP, your device is
automatically recognised as an external hard drive. All the
applications in your device are closed, and the phone goes
offline.
To synchronise music with Windows Media player, select
Media player as the connection method. To select the
connection mode, use the joystick.
To change the default USB connection mode, press ,
select Connect. > Data cbl. and one of the options in
Data cable mode.
Music transfer
Both Windows Media player and Nokia Music Manager in
Nokia PC Suite have been optimized for transferring music
files. For information about transferring music with Nokia
Music Manager, see Nokia PC Suite User Guide provided
on the CD-ROM with your Nokia N91.
The following instructions have been written based on
information about the latest compatible Windows Media
player version available at the time of writing. However,
the details of the instructions especially concerning the
locations and naming of different options may not be
accurate and are subject to change. For more up-to-date
information see the corresponding Windows Media player
guides and helps.
Manual synchronisation
After connecting your device with a compatible PC,
Windows Media player selects manual sync, if there is
Music player
less than 8 GB of free storage room in your device or if
there is not enough storage room to fit your entire library.
With manual sync, you select the songs and playlists that
you want to move, copy, or remove.
The first time you connect your device you must enter a
name that is used as the name of your device in Windows
Media player.
To transfer selected manually:
1 After your device is connected with Windows Media
player, select your device in the Navigation pane, if
more than one device is connected.
2 Drag the songs or albums to the List pane for
synchronisation. To remove songs or albums, select an
item in the list and click Remove from list .
3 Check that the List pane contains the files you want to
synchronise and that there is enough capacity on the
device. Click Start Sync. to start the synchronisation.
Automatic synchronisation
To change the default file transfer option in Windows
Media player, click the arrow under Sync , select your
device, and click Set up Sync. Clear or select the Sync this
device automatically check box.
If the Sync this device automatically check box is
selected and you connect your device, your N91 music
library is automatically updated based on playlists you
have selected in Windows Media player.
If no playlists have been selected, the whole PC music
library is selected for syncronisation. Note that your PC
library may contain more files that can fit to the hard drive
of your Nokia N91. See Windows Media player help for
more information.
The playlists on your device are not synchronised with the
Windows Media player playlists.
Playlists
Create a playlist
To create a playlist of songs:
1 Select Options > Create playlist in Playlists view.
2 Enter a name for the playlist, and select OK or press the
joystick.
3 Expand and collapse an artist title to find the songs you
want to include in the playlist. Press the joystick to add
items. To show the song list under an artist title, move
the joystick to the right. To hide the song list, move the
joystick to the left.
4 When you have made your selections, select Done.
Add songs to a playlist
You can add songs to an existing playlist or first create a
new playlist.
1 In a song list, select Options > Add songs.
2 Expand and collapse an artist title to find the songs you
want to include in the playlist. Press the joystick to add
items. To show the song list under an artist title, move
the joystick to the right. To hide the song list, move the
joystick to the left.
3 When you have made your selections, select Done.
Tip! You can even add songs to a playlist that is
currently playing.
To search for a song start entering letters with the
keypad.
Reorder songs
1 Select Options > Reorder list in a playlist view.
2 The selected song is ready to be moved. Scroll up or
down to move it or leave it there.
3 Select Drop.
4 Scroll to the song you want to move.
5 Select Grab.
6 Scroll to a new position.
7 Select Drop.
8 When you have reordered the list, select Done.
Tip! To grab and drop, you can also press the joystick.
Remove songs from a playlist
You can remove songs from a playlist.
1 Scroll to a song in a playlist.
2 Select Options > Remove from playlist.
3 Select Yes to confirm. This deletion does not delete the
song from the device; it only removes it from the
playlist.
Add items from views to a playlist
You can add songs, albums, artists, genres, and composers
from different views of the Music menu to existing or new
playlists.
1 In a view opened from the Music menu, select an item.
2 Select Options > Add to a playlist > Saved playlist or
New playlist.
3 If you selected New playlist, enter a name for the
playlist, and select OK. If you selected Saved playlist,
select the playlist and OK.
Album art—Opens a view which will show you album art
currently attached to the selected album or song You can
change or add album art using images on your phone.
Mark/Unmark—Allows you to select several items for
action
Set as ringing tone—Selects the selected song as the
ringing tone of the active profile. If you select songs from
the hard drive to be used as ringing tones, they may not
work with vibra. For optimal performance, store the ringing
tones in the device memory.
Reorder list—Rearrange the songs of a playlist
Options only in Now Playing view
Go to Music menu—Opens the Music menu view
Shuffle—Switches the shuffle mode on or off. In shuffle
mode the songs are played in random order.
Repeat—Repeats the song or all songs in the list that is
currently being played.
Equaliser—Opens a view where you can adjust the sound
frequency balance.
Audio settings—Opens a view where you can change the
sound balance, stereo image and bass response.
Start visualisation—Opens a list of available
visualizations.
Rename items
1 Select an Artist, Album, Genre, or Composer from the
list.
2 Select Options > Rename.
3 Enter the new name, and select OK. All songs
belonging to the selected artist, album, genre, or
composer are updated.
View and edit song details
In a song view, Select Options > Song details. The
following information is displayed and editable.
Song name—The name of the song
Artist—The name of the artist
Album—The name of the album to which this song
belongs
Track number—The song position in the album to which
this song belongs
Year—The year in which the album was released
Genre—The style category to which this song belongs
To view details like Format, Duration, and Copyright,
select Options > View file details in Song details view.
Library details
In Music menu select Options > Music library details.
Music player
The following information is displayed:
Songs—The current number of songs in the library
Duration—The length of current songs together
Used—The total size of the files in the music libray
Available—Available hard disk space in gigabytes
Refreshed—The date when the libraray was last modified
Set a song as a ringing tone
1 Select a song.
2 Select Options > Set as ringing tone. The selected
song has been set as the ringing tone for the active
profile.
Visualization
1 In Now playing view, select Options > Start
visualisation.
2 Select one of the available visulizations.
3 Press Close to return to Now playing view.
Change album art
1 Select a song.
2 Select Options > Album art.
3 Select Options > Change.
4 Scroll throough images from your Gallery, and select
Select:.
5 To restore the original album art, select Restore
original.
About encoded audio
Applications like Windows Media player and Nokia Audio
Manager encode audio files with codecs like WMA or MP3
to save storage space. The encoding is done by removing
those parts of the audio signal that are not audible or only
barely audible by human ear.
Regardless of the encoder and codec quality, the sound
quality of the resulting file is not as good as the original.
The basic codecs supported by this device are AAC, WMA,
and MP3. All of these have different variations.
When encoding audio, the quality of the resulting sound
depends on the sample rate and bit rate used for the
encoding. Sample rate is expressed as thousands of
samples per second (kHz), and for CD music the sample
ra te is fixe d at 44 .1 kHz . Bit rate i s exp ress ed as k ilobi ts pe r
second (Kbps). The higher the bitrate, the better the sound
quality.
The required quality level may depend on your demands,
the headphones used, and the surrounding noise. For MP3s
a bitrate between 128 and 192 Kbps usually gives results
good enough for listening to pop music with your device.
WMA or AAC generally gives a similar result as MP3 with
one step lower bitrate (96-160 Kbps). Variations of AAC,
such as AAC+ and enhanced AAC+ (eAAC+) provide CD
quality audio at bitrates as low as 48 Kbps. Classical music
and music with nuances usually require a higher bitrate
than basic pop music.
For speech or other sources where the quality of the sound
is less important than saving storage space, you can use
bitrates between 8 and 64 Kbps. At low bitrates WMA or
AAC generally gives better results than MP3.
Variable bitrate
Your device also supports variable bitrate (VBR). Variable
bitrate means that the bit rate of the encoding varies with
the complexity of the encoded material. When using VBR,
the encoding is optimized to preserve a constant audio
quality throughout the track, rather than losing quality for
complex music sections as with constant bitrate (CBR)
encoding.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device
may also have been specially configured for your network
provider. This configuration may include changes in menu
names, menu order, and icons. Contact your service
provider for more information.
Personalize your device
Profiles—Set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles. If
the currently selected profile is other than General, the
profile name is shown at the top of the display in the
standby mode.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press the
joystick to open the choices. Tones stored on the hard
drive are indicated with . You can scroll through the
tone list and listen to each one before you make your
selection. To stop the sound, press any key.
When you choose a tone, Tone downloads opens a list of
bookmarks. You can select a bookmark and connect to a
Web page to download tones.
If you want the caller’s name to be said when your device
rings, select Options > Personalise, and set Say caller's
name to On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
If listen to music and Music profile is selected, you only
hear a beep for incoming calls and all the other alert tones
are switched off.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
When you have activated the Offline profile, you can still
use the wireless LAN (if available) to read your e-mail or
browse on the Internet, for example. Remember to comply
with any applicable safety requirements when establishing
and using a wireless LAN connection. See ‘Wireless LAN’,
p. 95.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
To leave the Offline profile, press , and select Tools >
Profiles, scroll to another profile, and select Options >
Activate > Yes. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If Bluetooth connectivity is activated before
entering the Offline profile, it will be deactivated.
Bluetooth connectivity is automatically reactivated after
leaving the Offline profile. See ‘Settings’, p. 91.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by . In Themes you can group
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on the hard drive are indicated by .
To open a browser connection and download more
themes, select Theme downloads.
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings.
To restore the selected theme to its original settings,
select Options > Restore orig. theme when you edit a
theme.
Active standby mode
Use your standby display for fast access to your most
frequently used applications. By default, the active
standby mode is on.