to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration
or country specific information at www.nokia.com.
Nokia, Nokia Connecting People, Nokia Care, Eseries, E61i, Navi and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with
the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license
is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES
THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Model number: E61i-1
9255175/Issue 1
Hereby, NOKIA CORPORATION declares that this RM-227 product is in compliance with the essential requirements and other relevant provisions of Directive:
1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies
Warranty and reference information
1. Contact Nokia ...................................................................... 3
Get help............................................................................................................ 4
Find your phone label .............................................................................. 4
Reproduction, transfer, distribution or storage of part or all of the contents in this document in
any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and the Nokia Original Enhancements logos are trademarks or
registered trademarks of Nokia Corporation. All other product and company names mentioned
herein may be trademarks or tradenames of their respective owners.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE C ONTE NTS O F THIS DO CUME NT AR E PRO VIDED "A S IS. " EXC EPT A S REQU IRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
2
Contact Nokia
1.Contact Nokia
If you ever need to call Nokia Care Contact Center, you will need to provide specific
information about your phone. Whether you are calling about your device or an
enhancement, have the equipment with you when you call. If a Nokia representative
asks a specific question about the enhancement, you will have it available for
quick reference.
(1-888-665-4228)
Fax: 1-813-249-9619
Web site: www.nokiausa.com/support
In Canada call:
Tel: 1-888-22-NOKIA
(1-888-226-6542)
Web site: www.nokia.ca
For TTY/TDD users only:
1-800-24-NOKIA (1-800-246-6542)
3
Contact Nokia
■ Get help
Find your phone label
If you need to call the Nokia Care Contact
Center or your service provider, you will need
to provide specific information about your
phone. This information is provided on the
phone label (1), which is on the back of the
phone (under the battery). It contains the
model and serial numbers, as well as other
important information about your phone.
To help Nokia promptly answer your questions, please have the following
information available before contacting the Nokia Care Contact Center:
• Your phone model number
• Type number
• International mobile equipment identity (IMEI)
or electronic serial number (ESN)
• Your zip code
• The phone or enhancement in question
■ Updates
Check www.nokiausa.com/support or your local Nokia Web site for the latest version
of this guide, additional information, downloads, and services related to your Nokia
product. You may also download free configuration settings su ch as MMS, GPRS, e-mail,
and other services for your phone model at www.nokiausa.com/phonesettings
If you still require assistance, check the list of local Nokia contact centers at
www.nokiausa.com/customerservice
or www.nokiausa.com/contact_us.
.
■ Register your phone
Make sure to register your phone at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you should need to call a customer center or to have your phone repaired.
■ E-newsletters
When you register your phone, you can sign up for the Nokia e-newsletter, Nokia
Connections. You will receive tips and tricks on using your phone, enhancement
information, and special offers.
4
Nokia One-Year Limited Warranty
2.Nokia One-Year Limited Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from
defects in material and workmanship that result in Product failure during normal
usage, according to the following terms and conditions:
1. The limited warranty for the Product extends for ONE (1) year beginning on the
date of the purchase of the Product. This one year period is extended by each
whole day that the Product is out of your possession for repair under this warranty.
2. The limited warranty extends only to the original purchaser (“Consumer”) of
the Product and is not assignable or transferable to any subsequent purchaser/
end-user.
3. The limited warranty extends only to Consumers who purchase the Product in
the United States of America.
4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s
sole option, any defective parts, or any parts that will not properly operate for
their intended use with new or refurbished replacement items if such repair or
replacement is needed because of product malfunction or failure during
normal usage. No charge will be made to the Consumer for any such parts.
Nokia will also pay for the labor charges incurred by Nokia in repairing or
replacing the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including framing, and
any non-operative parts. Nokia’s limit of liability under the limited warranty
shall be the actual cash value of the Product at the time the Consumer returns
the Product for repair, determined by the price paid by the Consumer for the
Product less a reasonable amount for usage. Nokia shall not be liable for any
other losses or damages. These remedies are the Consumer’s exclusive
remedies for breach of warranty.
5. Upon request from Nokia, the Consumer must prove the date of the original
purchase of the Product by a dated bill of sale or dated itemized receipt.
6. The Consumer shall bear the cost of shipping the Product to Nokia. Nokia shall
bear the cost of shipping the Product back to the Consumer after the completion
of service under this limited warranty.
7. The Consumer shall have no coverage or benefits under this limited warranty if
any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other acts
which are not the fault of Nokia, including damage caused by shipping.
5
Nokia One-Year Limited Warranty
b) The Product has been damaged from external causes such as collision with
an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake
or damage from exposure to weather conditions, an Act of God, or battery
leakage, theft, blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan Horses,
cancelbots or damage caused by the connection to other products not
recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged defect or
malfunction of the Product within fourteen (14) days after the expiration of
the applicable limited warranty period.
d) The Product serial number plate or the enhancement data code has been
removed, defaced or altered.
e) The defect or damage was caused by the defective function of the cellular
system or by inadequate signal reception by the external antenna, or
viruses or other software problems introduced into the Product.
8. Nokia does not warrant uninterrupted or error-free operation of the Product.
If a problem develops during the limited warranty period, the Consumer shall
take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for repair or
replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles) or for other
good cause, the Consumer shall ship the Product prepaid and insured to Nokia.
See www.nokiausa.com/support
nearest you.
c) The Consumer shall include a return address, daytime phone number and/or
fax number, complete description of the problem, proof of purchase and
service agreement (if applicable). Expenses related to removing the Product
from an installation are not covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not covered by
this limited warranty. The Consumer will be responsible for any expenses
related to reinstallation of the Product.
e) Nokia will repair the Product under the limited warranty within 30 days
after receipt of the Product. If Nokia cannot perform repairs covered under
this limited warranty within 30 days, or after a reasonable number of
attempts to repair the same defect, Nokia at its option, will provide a
replacement Product or refund the purchase price of the Product less a
reasonable amount for usage. In some states the Consumer may have the
right to a loaner if the repair of the Product takes more than ten (10) days.
for the address of the repair center
6
Nokia One-Year Limited Warranty
Please contact the Nokia Care Contact Center at the telephone number
listed at the end of this warranty if you need a loaner and the repair of the
Product has taken or is estimated to take more than ten (10) days.
f) If the Product is returned during the limited warranty period, but the
problem with the Product is not covered under the terms and conditions of
this limited warranty, the Consumer will be notified and given an estimate
of the charges the Consumer must pay to have the Product repaired, with
all shipping charges billed to the Consumer. If the estimate is refused, the
Product will be returned freight collect. If the Product is returned after the
expiration of the limited warranty period, Nokia’s normal service policies
shall apply and the Consumer will be responsible for all shipping charges.
9. You (the Consumer) understand that the product may consist of refurbished
equipment that contains used components, some of which have been
reprocessed. The used components comply with Product performance and
reliability specifications.
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING
LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED
WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE
LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF
USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL,
COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS
OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY,
RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING
FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA
KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE
FOR DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS
OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.
11. Some states do not allow limitation of how long an implied warranty lasts, so
the one year warranty limitation may not apply to you (the Consumer). Some
states do not allow the exclusion or limitation of incidental and consequential
damages, so certain of the above limitations or exclusions may not apply to you
(the Consumer). This limited warranty gives the Consumer specific legal rights
and the Consumer may also have other rights which vary from state to state.
7
Nokia One-Year Limited Warranty
12. Nokia neither assumes nor authorizes any authorized service center or any
other person or entity to assume for it any other obligation or liability beyond
that which is expressly provided for in this limited warranty including the
provider or seller of any extended warranty or service agreement.
13. This is the entire warranty between Nokia and the Consumer, and supersedes
all prior and contemporaneous agreements or understandings, oral or written,
relating to the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14. This limited warranty allocates the risk of failure of the Product between the
Consumer and Nokia. The allocation is recognized by the Consumer and is
reflected in the purchase price.
15. Any action or lawsuit for breach of warranty must be commenced within
eighteen (18) months following purchase of the Product.
16. Questions concerning this limited warranty may be directed to:
Nokia Inc.
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 249-9619
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)
Website: www.nokiausa.com/support
8
Message from the CTIA
3.Message from the CTIA
(Cellular Telecommunications & Internet Association)
to all users of mobile phones
Safety is the most important call you will ever make.
■ A Guide to Safe and Responsible Wireless
Phone Use
Tens of millions of people in the U.S. today take advantage of the unique combination
of convenience, safety and value delivered by the wireless telephone. Quite simply,
the wireless phone gives people the powerful ability to communicate by voice—
almost anywhere, anytime—with the boss, with a client, with the kids, with
emergency personnel or even with the police. Each year, Americans make billions
of calls from their wireless phones, and the numbers are rapidly growing.But an
important responsibility accompanies those benefits, one that every wireless phone
user must uphold. When driving a car, driving is your first responsibility. A wireless
phone can be an invaluable tool, but good judgment must be exercised at all times
while driving a motor vehicle—whether on the phone or not.The basic lessons are
ones we all learned as teenagers. Driving requires alertness, caution and courtesy.
It requires a heavy dose of basic common sense—keep your head up, keep your eyes
on the road, check your mirrors frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the speed limit. It means
using seatbelts and requiring other passengers to do the same. But with wireless
phone use, driving safely means a little more. This brochure is a call to wireless
phone users everywhere to make safety their first priority when behind the wheel
of a car. Wireless telecommunications is keeping us in touch, simplifying our lives,
protecting us in emergencies and providing opportunities to help others in need.
When it comes to the use of wireless phones, safety is your most important call.
9
Message from the CTIA
■ Wireless Phone "Safety Tips"
Below are safety tips to follow while driving and using a wireless phone which
should be easy to remember.
1. Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable
features most phones offer, including automatic redial and memory. Also, work
to memorize the phone keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands-free device. A number of hands-free wireless
phone accessories are readily available today. Whether you choose an installed
mounted device for your wireless phone or a speaker phone accessory, take
advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure you place your
wireless phone within easy reach and where you can grab it without removing
your eyes from the road. If you get an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let
the person you are speaking with know you are driving; if necessary, suspend
the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and
ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility
is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading an
address book or business card, or writing a "to do" list while driving a car, you
are not watching where you are going. It’s common sense. Don’t get caught in a
dangerous situation because you are reading or writing and not paying attention
to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not
moving or before pulling into traffic. Try to plan your calls before you begin
your trip or attempt to coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you need to dial while driving,
follow this simple tip—dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix—they are distracting
and even dangerous when you are behind the wheel of a car. Make people you
are talking with aware you are driving and if necessary, suspend conversations
which have the potential to divert your attention from the road.
10
Message from the CTIA
8. Use your wireless phone to call for help. Your wireless phone is one of the greatest
tools you can own to protect yourself and your family in dangerous situations—
with your phone at your side, help is only three numbers away. Dial 9-1-1 or
other local emergency number in the case of fire, traffic accident, road hazard
or medical emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone
provides you a perfect opportunity to be a "Good Samaritan" in your community.
If you see an auto accident, crime in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local emergency number, as you would
want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance number
when necessary. Certain situations you encounter while driving may require
attention, but are not urgent enough to merit a call for emergency services. But
you still can use your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident
where no one appears injured or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard
to everyone on the road. Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted educational outreach to
inform wireless phone users of their responsibilities as safe drivers and good
citizens. As we approach a new century, more and more of us will take advantage
of the benefits of wireless telephones. And, as we take to t he roads, we all have a
responsibility to drive safely.The wireless industry reminds you to use your phone
safely when driving. For more information, please call 1-888-901-SAFE.
For updates:
http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
11
Message from the FDA
4.Message from the FDA
The U.S. Food and Drug Administration (FDA) provides the following consumer
information about wireless phones.
See http://www.fda.gov/cellphones/ for updated information.
Do wi rel ess phones pose a hea lth hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radiofrequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type
emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at
the federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
12
Message from the FDA
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions discussed in this document.
What is FDA doing to find out more about the possible health effects of
wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to
radiofrequency energy (RF). FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF) Project since its inception
in 1996. An influential result of this work has been the development of a detailed
agenda of research needs that has driven the establishment of new research
programs around the world. The Project has also helped develop a series of public
information documents on EMF issues. FDA and the Cellular Telecommunications
& Internet Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on wireless phone safety. FDA
provides the scientific oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded research is conducted through
contracts to independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The CRADA will also include a
broad assessment of additional research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radiofrequency energy from
my wireless phone?
If there is a risk from these products--and at this point we do not know that there
is--it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radiofrequency
13
Message from the FDA
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless phone
connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful.
But if you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radiofrequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones,
there is no reason to believe that hands-free kits reduce risks. Hands-free kits can
be used with wireless phones for convenience and comfort. These systems reduce
the absorption of RF energy in the head because the phone, which is the source of
the RF emissions, will not be placed against the head. On the other hand, if the phone
is mounted against the waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones marketed in the U.S. are
required to meet safety requirements regardless of whether they are used against
the head or against the body. Either configuration should result in compliance with
the safety limit.
14
Message from the FDA
Do wireless phone accessories that claim to shield the head from RF
radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones,
there is no reason to believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may be forced to boost
its power to compensate, leading to an increase in RF absorption. In February 2002,
the Federal trade Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with making false and
unsubstantiated claims. According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
How does FCC Audit Cell Phone RF?
After FCC grants permission for a particular cellular telephone to be marketed, FCC will
occasionally conduct “post-grant” testing to determine whether production versions
of the phone are being produced to conform with FCC regulatory requirements. The
manufacturer of a cell phone that does not meet FCC’s regulatory requirements
may be required to remove the cell phone from use and to refund the purchase price
or provide a replacement phone, and may be subject to civil or criminal penalties.
In addition, if the cell phone presents a risk of injury to the user, FDA may also
take regulatory action. The most important post-grant test, from a consumer’s
perspective, is testing of the RF emissions of the phone. FCC measures the Specific
Absorption Rate (SAR) of the phone, following a very rigorous testing protocol.
As is true for nearly any scientific measurement, there is a possibility that the test
measurement may be less than or greater than the actual RF emitted by the phone.
This difference between the RF test measurement and actual RF emission is because
test measurements are limited by instrument accuracy, because test measurement
and actual use environments are different, and other variable factors. This inherent
variability is known as “measurement uncertainty.” When FCC conducts post-grant
testing of a cell phone, FCC takes into account any measurement uncertainty to
determine whether regulatory action is appropriate. This approach ensures that
when FCC takes regulatory action, it will have a sound, defensible scientific basis.
FDA scientific staff reviewed the methodology used by FCC to measure cell phone
RF, and agreed it is an acceptable approach, given our current understanding of the
risks presented by cellular phone RF emissions. RF emissions from cellular phones
have not been shown to present a risk of injury to the user when the measured SAR
is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where
15
the maximum measurement uncertainty permitted by current measurement
standards was added to the maximum permissible SAR, the resulting SAR value
would be well below any level known to produce an acute effect. Consequently,
FCC’s approach with measurement uncertainty will not result in consumers being
exposed to any known risk from the RF emitted by cellular telephones.
FDA will continue to monitor studies and literature reports concerning acute
effects of cell phone RF, and concerning chronic effects of long-term exposure to
cellular telephone RF (that is, the risks from using a cell phone for many years). If
new information leads FDA to believe that a change to FCC’s measurement policy
may be appropriate, FDA will contact FCC and both agencies will work together to
develop a mutually-acceptable approach.
Updated July 29, 2003
16
Garantía e información de referencia
1. Contacto con Nokia........................................................... 19
en cualquier forma sin el previo permiso escrito de parte de Nokia.
Nokia, Nokia Connecting People, y los logos de Nokia Original Enhancements son marcas,
registradas o no, de Nokia Corporation. Otros nombres de productos y compañías aquí
mencionados podrían ser marcas o nombres, registrados o no, de sus respectivos propietarios.
BAJO NINGÚN CONCEPTO NOKIA SERÁ RESPONSABLE POR CUALQUIER PÉRDIDA DE DATOS O
GANANCIAS O POR CUALQUIER OTRO DAÑO ESPECIAL O INCIDENTAL Y CONSECUENTE, POR
CUALQUIER CAUSA DIRECTA O INDIRECTA.
EL CONTENIDO DE ESTE DOCUMENTO ESTÁ PROVISTO "TAL CUAL". ADEMÁS DE LAS EXIGIDAS
POR LAS LEYES, NO SE EMITE NINGUNA OTRA GARANTÍA DE NINGÚN TIPO, SEA EXPRESA O
IMPLÍCITA, INCLUYENDO, PERO SIN LIMITARSE A, GARANTÍAS IMPLÍCITAS DE MERCADEO Y DE
CAPACIDAD PARA UN PROPÓSITO PARTICULAR, EN CUANTO A LA PRECISIÓN Y FIABILIDAD O
CONTENIDO DE ESTE DOCUMENTO. NOKIA SE RESERVA EL DERECHO DE REVISAR ESTE
DOCUMENTO O DESCONTINUAR SU USO EN CUALQUIER MOMENTO SIN PREVIO AVISO.
18
Contacto con Nokia
1.Contacto con Nokia
Si por alguna razón necesita llamar al Centro de Atención Nokia Care, deberá
proveer datos específicos sobre su teléfono. Si está llamando sobre su dispositivo o
un accesorio, téngalo a la mano al hacer la llamada. De esta forma, si un representante
de Nokia se le pregunta sobre el accesorio, lo tendrá para fácil referencia.
Si necesita llamar al Centro de Atención
Nokia Care o proveedor de servicio, tendrá
que proveer información específica sobre su
teléfono. Esta información está en la
etiqueta del teléfono (1), que se encuentra en
la parte posterior del teléfono (debajo de la
batería). Contiene el número de modelo y
números seriales, al igual que otra
información importante sobre su teléfono.
Para que Nokia pueda responder a sus preguntas de manera rápida, favor de tener
disponible la siguiente información antes de llamar al Centro de Atención Nokia Care:
• El número de modelo de su teléfono
•Tipo
• Identificación del Equipo Móvil Internacional (IMEI)
o Número Electrónico de Serie (ESN)
• Su código postal
• El teléfono o accesorio en cuestión
■ Actualizaciones
Visite www.nokiausa.com/support o su página Web local de Nokia para obtener la
versión más reciente de este manual, información adicional, descargas y servicios
relacionados a su producto Nokia. También podría descargar ajustes de configuraciones
gratuitos tal como MMS, GPRS, email y otro servicios para su modelo de teléfono
en www.nokiausa.com/phonesettings
Si aún necesita ayuda, consulte la lista local de Centros de Servicio al Cliente Nokia
en www.nokiausa.com/customerservice
.
o www.nokiausa.com/contact_us.
■ Registre su teléfono
Asegúrese de registrar su teléfono en www.warranty.nokiausa.com o llame al
1-888-NOKIA-2U (1-888-665-4228) para poder servirle mejor si necesita llamar
al centro de servicio o reparar su teléfono.
■ Boletines electrónicos
Al registrar su teléfono, podrá subscribirse al boletín electrónico de Nokia, Nokia
Connections. Recibirá datos o instrucciones sobre cómo usar su teléfono, accesorio
y ofertas especiales.
20
Garantía Limitada Nokia de Un (1) Año
2.Garantía Limitada Nokia
de Un (1) Año
Nokia Inc. (“Nokia”) garantiza que este teléfono celular (“Producto") está libre de
defectos en materiales y mano de obra los cuales generan averías durante su uso
normal, de acuerdo a los siguientes términos y limitaciones:
1. La garantía limitada para el Producto cubre UN (1) año a partir de la fecha de
compra del Producto. El período de garantía de un año tiene una prórroga
dependiendo de cuántos días el Comprador no tendrá acceso al teléfono
debido a la reparación amparada por dicha garantía.
2. La garantía limitada ampara al Comprador original ("Comprador") del
Producto y no es ni asignable ni transferible a cualquier subsiguiente
comprador/consumidor final.
3. La garantía limitada ampara únicamente a los Compradores que hayan
comprado el Producto en los Estados Unidos de América.
4. Durante el período de la garantía limitada, Nokia reparará o repondrá, a elección
de Nokia, cualquier parte o piezas defectuosas, o que no cumplan apropiadamente
con su función original, con partes nuevas o reconstruidas si dichas partes
nuevas o reconstruidas son necesarias debido al mal funcionamiento o avería
durante su uso normal. No se aplicará ningún cargo al Comprador por dichas
partes. Nokia pagará también los costos de mano de obra que Nokia incurra en
la reparación o reemplazo de las partes defectuosas. La garantía limitada no
ampara los defectos en hechura, las partes cosméticas, decorativas o artículos
estructurales, tampoco el marco, ni cualquier parte inoperativa. El límite de
responsabilidad de Nokia bajo la garantía limitada será el valor actual en
efectivo del Producto en el momento que el Comprador devuelva el Producto
para la reparación, que se determina por el precio que el Comprador pagó por
el Producto menos una cantidad razonable deducida por el tiempo de uso del
Producto. Nokia no será responsable de cualquier otra pérdida o perjuicio.
Estos remedios son los remedios exclusivos del Comprador para la violación de
la garantía.
5. A solicitud de Nokia, el Comprador deberá comprobar la fecha de la
compra original del Producto mediante un resguardo con fecha de la
compra del Producto.
6. El Comprador deberá asumir el costo de transportación del Producto a Nokia.
Nokia asumirá el costo del embarque de regreso del Producto al Comprador
una vez completado el servicio bajo esta garantía limitada.
21
Garantía Limitada Nokia de Un (1) Año
7. El Comprador no tendrá derecho a aplicar esta garantía limitada ni a
obtener ningún beneficio de la misma si cualquiera de las siguientes
condiciones es aplicable:
a) El Producto haya sido expuesto a: uso anormal, condiciones anormales,
almacenamiento inapropiado, exposición a la humedad, modificaciones no
autorizadas, conexiones no autorizadas, reparaciones no autorizadas, mal
uso, descuido, abuso, accidente, alteración, instalación inadecuada, u otros
actos que no sean culpa de Nokia, incluyendo daños ocasionados por embarque.
b) El Producto haya sido estropeado debido a causas externas tales como,
colisión con otro objeto, incendios, inundaciones, arena, suciedad, huracán,
relámpagos, terremoto o deterioro causado por condiciones meteorológicas,
factores de fuerza mayor o drenaje de batería, robo, fusible roto, o uso
inapropiado de cualquier fuente de energía; daños causados por cualquier
tipo de virus, errores, gusanos, Caballos de Troya, robo de cancelación
(Cancelbots) o perjuicio causado por una conexión a otros productos no
recomendados por Nokia para la interconexión.
c) Nokia no haya sido avisado por escrito por el Comprador del supuesto o
mal funcionamiento del Producto dentro del período de catorce (14) días
después de la caducidad del período de la aplicable garantía limitada.
d) La placa del número de serie del Producto o el código de dato del accesorio
haya sido quitado, borrado o alterado.
e) El defecto o daño haya sido causado por un funcionamiento defectuoso
del sistema celular, o por una inadecuada recepción de señal de la antena
exterior, o por cualquier tipo de virus u otros problemas de software que
haya sido introducido en el Producto.
8. Nokia no garantiza ni un funcionamiento ininterrumpido del producto ni
una operación sin errores. Si durante el período de la garantía limitada
llegase a desarrollar un problema, el Comprador deberá seguir paso a paso
el siguiente procedimiento:
a) El Comprador deberá devolver el Producto al lugar de adquisición para su
reparación o proceso de reemplazo.
b) Si “a” no resulta conveniente debido a la distancia (más de 50 millas) o por
cualquier otra buena razón, el Comprador deberá embarcar el Producto
prepagado y asegurado a Nokia. Para saber la dirección del centro de
reparación más cercano, visite www.nokiausa.com/support
.
22
Garantía Limitada Nokia de Un (1) Año
c) El Comprador deberá incluir la dirección del remitente, número telefónico (de
día) y/o número de fax, una descripción completa del problema, resguardo de
compra y acuerdo de servicio (si es aplicable). Los gastos incurridos para remover
el Producto de una instalación no son cubiertos por esta garantía limitada.
d) El Comprador será responsable de las facturas correspondientes a las partes
o la mano de obra no cubiertas por esta garantía limitada. El Comprador
será responsable de cualquier gasto de reinstalación del Producto.
e) Nokia reparará el Producto bajo la garantía limitada dentro de un plazo de
30 días después de la recepción del Producto. Si Nokia no puede realizar la
reparación amparada por esta garantía limitada dentro de 30 días, o tras una
cantidad razonable de intentos de reparar el mismo defecto, Nokia tiene la
opción de proveer un repuesto del Producto o abonar el precio de compra del
Producto menos una cantidad razonable aplicable al uso. En ciertos estados
el Comprador tendrá derecho a un teléfono prestado cuando la reparación
del producto pueda durar más de diez (10) días. Contacte al Centro de
Atención Nokia Care al número telefónico que aparece al final de esta
garantía si necesita un teléfono prestado y si la reparación del Producto
tardará/está calculado a tardar más de diez (10) días.
f) En caso de que el Producto haya sido devuelto a Nokia dentro del período de
la garantía limitada, pero el problema del Producto no esté cubierto por los
términos y condiciones de esta garantía limitada, el Comprador será notificado
y recibirá un presupuesto del costo a pagar por el Comprador por la reparación
del producto y gastos de envío facturado al Comprador. Si el presupuesto es
rechazado, el producto será devuelto al cliente por mensajería por cobrar.
Si el producto es devuelto a Nokia después de la fecha de vencimiento del
plazo de la garantía limitada, se aplicarán las políticas normales de servicio
de Nokia y el Comprador será responsable de todos los gastos de envío.
9. Usted (el comprador) entiende que el producto consta de un ensamble nuevo
que puede contener componentes usados los cuales han sido reprocesados.
Los componentes usados cumplen las especificaciones de rendimiento y
confiabilidad del Producto.
10. CUALQUIER GARANTÍA IMPLÍCITA O MERCANTIL PARA CUALQUIER PROPÓSITO
O USO PARTICULAR DEBE LIMITARSE A LA DURACIÓN DE LA ESCRITA GARANTÍA
LIMITADA PRECEDENTE. DE OTRA FORMA, LA GARANTÍA PRECEDENTE ES EL
ÚNICO EXCLUSIVO REMEDIO DEL COMPRADOR Y EN LUGAR DE CUALQUIER
OTRA GARANTÍA, EXPRESA O IMPLÍCITA NOKIA NO PODRÁ SER REQUERIDO
POR DAÑOS INCIDENTALES, PUNITIVOS O CONSECUENCIALES O POR PÉRDIDAS
ANTICIPADAS INCLUYENDO, PERO SIN LIMITAR, A PÉRDIDA DE BENEFICIOS
23
Garantía Limitada Nokia de Un (1) Año
O GANANCIAS ANTICIPADAS, PÉRDIDA DE AHORROS O INGRESOS, DAÑOS
PUNITIVOS, PÉRDIDA DE USO DEL PRODUCTO O DE CUALQUIER OTRO EQUIPO
RELACIONADO, COSTO DE CAPITAL, COSTO DE CUALQUIER EQUIPO O FACILIDAD
DE REEMPLAZO, TIEMPO MUERTO, LAS DEMANDAS DE PERSONAS A TERCERAS
INCLUYENDO CLIENTES, Y DAÑO A LA PROPIEDAD COMO RESULTADOS DE LA
COMPRA O USO DEL PRODUCTO O CAUSADO POR UNA VIOLACIÓN DE LA
GARANTÍA DE CONTRATO, NEGLIGENCIA, INDEMNIZACIÓN ESTRICTA, O
CUALQUIER OTRA TEORÍA LEGAL O IMPARCIAL, AÚN CUANDO NOKIA SUPIERA
DE LA EXISTENCIA DE DICHO DAÑOS, NOKIA NO SERÁ RESPONSABLE DE LA
DEMORA EN LA APORTACIÓN DE SERVICIO BAJO LA GARANTÍA LIMITADA, O
PÉRDIDA DE USO DURANTE EL PERÍODO DE LA REPARACIÓN DEL PRODUCTO.
11. Algunos estados no permiten limitación de duración de una garantía implícita,
entonces puede que la garantía limitada de un año no le concierna a usted (el
Comprador). Algunos estados no permiten exclusiones o limitaciones de daños
incidentales y consecuentes, por lo tanto puede que ciertas limitaciones o
exclusiones arriba indicadas no le conciernan a usted (el Comprador). Esta
garantía limitada le concede al Comprador derechos específicos y legales y
puede ser que el Comprador tenga otros derechos, los cuales varían de
estado a estado.
12. Nokia tampoco asume ni autoriza a cualquier centro de servicio, persona o
entidad autorizada que se asumiera para Nokia ninguna otra obligación o
responsabilidad que no esté explícitamente provista en esta garantía limitada
incluyendo al proveedor o al vendedor de cualquier garantía extendida o
acuerdo de servicio.
13. Ésta es la garantía entera entre Nokia y el Comprador, e invalida todos los
contratos o acuerdos anteriores y contemporáneos, verbales o escritos, y todas
las comunicacione s relacionadas al Producto y ninguna representación, promesa
o condición no mencionadas en el presente modificará estos términos.
14. La garantía limitada indica el riesgo de falla del Producto entre el Comprador y
Nokia. La indicación es reconocida por el Comprador y se refleja en el precio de
venta del Producto.
15. Cualquier gestión o acción legal relacionada a la garantía deberá ser iniciada
dentro de los dieciocho (18) meses subsecuentes al envío del Producto.
16. Cualquier pregunta concerniente a esta garantía limitada puede dirigirse a:
Nokia Inc.
Tel.: 1-888-NOKIA-2U (1-888-665-4228)
Fax: (813) 249-9619
Sólo para usuarios de TTY/TDD: 1-800-24-NOKIA (1-800-246-6542)
Pág. Web: www.nokiausa.com/support
24
Mensaje de la CTIA
3.Mensaje de la CTIA
(Cellular Telecommunications & Internet Association)
para todos los usuarios de teléfonos celulares
La seguridad es su deber más importante que tendrá que realizar.
■ Una guía para el uso responsable y seguro
del teléfono celular
Hoy día millones de personas en los Estados Unidos aprovechan de la combinación
única de comodidad, seguridad y valor que la telefonía celular aporta. Sencillamente,
el teléfono celular da a la gente la habilidad poderosa de poder comunicarse por voz casi en todos los sitios a cualquier hora - con el jefe, un cliente, los hijos, en caso de
emergencias o incluso con la policía. Cada año los americanos hacen miles de millones
de llamadas con sus teléfonos celulares, y aun la cifra asciende rápidamente. Pero
una responsabilidad importante acompaña esas ventajas la cual es reconocida por
el usuario de teléfono celular. Cuando es tá conduciendo, su responsabilidad primordial
es conducir. Un teléfono celular puede ser una herramienta indispensable, no obstante,
el conductor deberá tener un buen juicio todo el tiempo mientras está conduciendo esté o no esté usando el teléfono. Las lecciones básicas son aquellas que habíamos
aprendido cuando éramos jóvenes. El conducir requiere agilidad, precaución y
cortesía. Necesita mucho sentido común - mantenga la cabeza en posición normal,
dirija la vista hacia el trayecto, compruebe los visores con frecuencia y precaución con
los demás conductores. Deberá respetar todas las señales de tráfico y mantenerse
dentro del límite de velocidad. Deberá abrocharse el cinturón de seguridad y requerir
que los otros pasajeros hagan lo mismo. Pero con el teléfono celular, el conducir
significa algo más. Este folleto es una llamada a todos los usuarios de teléfonos
celulares en todos los sitios para que la seguridad sea su prioridad cuando están
detrás del volante. La telecomunicación celular sirve para ponernos en contacto,
simplificar nuestra vida, protegernos durante una emergencia y proveernos la
oportunidad de poder ayudar a los demás. En cuanto al uso del teléfono celular,
la seguridad es su deber más importante.
25
Mensaje de la CTIA
■ "Guías de seguridad sobre el uso del Teléfono Celular"
A continuación, se reflejan las guías de seguridad a seguir mientras está conduciendo
y usando un teléfono celular las cuales deberían ser fáciles de recordar.
1. Conozca bien su teléfono celular y sus funciones, tales como la marcación rápida
y rediscado. Lea detenidamente su manual de instrucciones y aprenda a optimizar
las opciones que el teléfono pueda ofrecer, incluyendo rediscado automático y la
memoria. También, aprenda de memoria el teclado para poder usar la función de
marcación rápida sin la necesidad de quitar la vista de la carretera.
2. Cuando esté disponible, use la función manos libres. Hoy día se dispone de una
cantidad de accesorios manos libres. Aunque elija el dispositivo de montaje
instalado para su teléfono celular o un microteléfono, aproveche los
dispositivos disponibles.
3. Coloque su teléfono celular para un alcance fácil. Asegúrese de ubicar su teléfono
celular a la mano, donde lo pueda levantar sin tener que quitar la vista de la
carretera. Cuando entre una llamada, si es posible, que su buzón de voz lo responda.
4. Posponga cualquier conversación mientras esté conduciendo en una situación muy
peligrosa. Como conductor, su responsabilidad es prestarle atención al tráfico.
Dígale a la otra persona que usted está conduciendo; si fuera necesario, cancele la
llamada en embotellamientos o durante situaciones peligrosas de tiempo. La lluvia,
aguanieve, nieve y hielo pueden ser tan peligrosas como los embotellamientos.
Como conductor, su responsabilidad es prestarle atención al tráfico.
5. No tome notas o busque números telefónicos cuando esté conduciendo. Si está
leyendo un directorio o tarjeta de negocio, o escribiendo una lista de "tareas"
mientras está conduciendo, no estará al tanto de su ruta. Es caso de sentido
común. No se involucre en situaciones de tráfico peligrosas debido a que usted esté
leyendo o escribiendo sin prestar atención al tráfico y a los vehículos cercanos.
6. Marque con sensatez y esté al tanto del tráfico; si fuera posible, haga las llamadas
cuando esté estacionado o retirado de la carretera antes de hablar. Trate de planear
sus llamadas antes de emprender el viaje para que sus llamadas coincidan con las
señales de Stop, semáforos en rojo o estacionamientos. Pero, si es preciso hacer
una llamada mientras esté conduciendo, siga esta norma sencilla: marque unos
pocos números, compruebe la carretera y sus visores, y luego continúe.
7. Evite conversaciones estresantes y emotivas que puedan distraer la atención.
No se pueden combinar el conducir y las conversaciones emotivas y estresantes es muy peligroso cuando está detrás del volante. Que la persona con quien está
hablando sepa que usted está conduciendo, y si es necesario, evite conversaciones
de distracción.
26
Mensaje de la CTIA
8. Utilice su teléfono celular para pedir socorro. Su teléfono celular es una de las
mejores herramientas que puede adquirir para protegerse a usted y a su familia
en situaciones peligrosas - con su teléfono a su lado tendrá el socorro a su alcance
con sólo la marcación de tres números. Marque 9-1-1 o el número local de
emergencia en caso de incendio, accidente de tráfico, peligro en la carretera o
emergencia médica. Recuerde, ¡es una llamada gratis en su teléfono celular!
9. Use su teléfono celular para ayudar a los demás en tiempo de emergencia. Su
teléfono celular le brinda la oportunidad perfecta para ser "un buen samaritano"
en su comunidad. En situaciones de accidente de tráfico, crímenes u otras
emergencias de vida, llame al 9-1-1 o el número local de emergencia, como
usted quiere que los demás hagan por usted.
10. Cuando sea necesario, llame al centro de asistencia de tráfico u otro número
celular de ayuda para situaciones que no son de emergencia. Puede encontrar
ciertas situaciones cuando esté conduciendo las cuales no merecen la necesidad
de referirlas a los servicios de emergencia. Pero sí puede usar su teléfono celular
para echar una mano. Si ve un automóvil que no corre en medio de la carretera
aunque no signifique ningún peligro, señales rotas de tráfico, un accidente
de tráfico sin ningún herido, o un vehículo robado, llame a la asistencia o a
otros números especiales de teléfonos celulares en situaciones que no son
de emergencia.
Las personas irresponsables, descuidadas, distraídas y los que conduzcan
irresponsablemente representan un peligro en la carretera. Al acercarnos hacia un
siglo nuevo, más gente se aprovechará de las ventajas de los teléfonos celulares.
Desde el año 1984, la Asociación de la Industria de Telecomunicaciones Celulares
(CTIA) y la industria celular han realizado asistencia educativa para informar a los
usuarios de teléfonos celulares de su responsabilidad siendo conductores cautelosos
y buenos ciudadanos. Al acercarnos hacia un siglo nuevo, más gente se aprovechará
de las ventajas de los teléfonos celulares. Y, al dirigirnos a la carretera, todos
tenemos la responsabilidad de conducir con cautela.
La industria celular le recuerda utilizar con seguridad su teléfono
mientras conduce.
Para más información, llame a 1-888-901-SAFE.
Para datos actualizados, visite:
http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
27
Mensaje de la FDA
4.Mensaje de la FDA
U.S. Food and Drug Administration (FDA) para todos los usuarios de
teléfonos celulares.
Para información actualizada, visite http://www.fda.gov/cellphones/.
¿Significan un peligro para la salud los teléfonos celulares?
La evidencia científica disponible no muestra que ningún problema de salud tiene
relación con el uso de teléfonos celulares. No hay pruebas, sin embargo, que los
teléfonos celulares son absolutamente seguros. Los teléfonos celulares emiten
niveles bajos de radiofrecuencia (RF) en la gama de microonda durante el uso.
También emiten niveles muy bajos de RF en modalidad de inactividad. Mientras que
los niveles altos de RF pueden influir la salud (por calentamiento) la exposición a
un nivel bajo de RF no produce efectos de calentamiento y no causa efectos adversos
a la salud. Muchos estudios sobre exposiciones a nivel bajo de RF no han encontrado
efectos biológicos. Ciertos estudios han sugerido que podrían resultar en ciertos
efectos biológicos, pero tales encuestas no han sido confirmadas por estudios
adicionales. En ciertos casos, otros investigadores han tenido dificultades para
reproducir tales estudios o determinar las causas de los resultados inconsistentes.
¿Cuál es el papel de la FDA concerniente a la seguridad de los teléfonos celulares?
Bajo la ley, la FDA no revisa la seguridad de los productos que generan radiación,
tales como, teléfonos celulares antes de su venta, como se hacen con medicamentos
o dispositivos médicos nuevos. Sin embargo, la agencia tiene la autoridad para
realizar una acción si es mostrado que el nivel de la radiofrecuencia (RF) emitida
por los teléfonos celulares muestra algún peligro para el usuario. En tal caso, la FDA
podría requerir a los fabricantes de teléfonos celulares que avisen a los usuarios del
peligro de los teléfonos celulares para la salud, y que reparen, o devuelvan los
teléfonos para que el ya peligro no exista.
Aunque los datos científicos existentes no justifican las acciones reglamentarias de
la FDA, la FDA le exige a la industria de teléfonos celulares que establezca medidas,
que incluyan las siguientes:
• Respaldar la investigación necesaria hacia los posibles efectos biológicos del
tipo de RF generada por teléfonos celulares;
• Diseñar los teléfonos celulares de tal manera que minimicen la exposición del
usuario a un nivel RF necesario para el funcionamiento del dispositivo; y
• Colaborar en la tarea de proveerles a los usuarios de teléfonos celulares la mayor
información posible sobre los resultados generados por el uso de los teléfonos
celulares en cuanto a la salud.
28
Mensaje de la FDA
La FDA pertenece a un grupo de interagencias de las agencias federales que se
encargan de los distintos aspectos de la seguridad de la RF para asegurar los
esfuerzos coordinados al nivel federal. Las agencias siguientes pertenecen a
este grupo:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
El National Institute of Health participa también en actividades del
grupo interagencia.
La FDA comparte con la Federal Communications Commission (FCC) las
responsabilidades para teléfonos celulares. Todos los teléfonos celulares vendidos
en los Estados Unidos deben cumplir con los reglamentos establecidos por la FCC
que limitan la exposición RF. La FCC depende de la FDA y otras agencias sanitarias
sobre los asuntos de seguridad de los teléfonos celulares.
La FCC también regulariza las estaciones base de donde dependen las redes de
teléfonos celulares. Mientras estas estaciones de base funcionan con una potencia
más alta que los propios teléfonos celulares, la exposición RF que el usuario podría
recibir de dichas estaciones bases es, en general, mucho más reducida que la RF
generada por los teléfonos celulares. Las estaciones de base no son el asunto de las
preguntas de seguridad tratadas en este documento.
¿Qué está realizando la FDA para saber más sobre los resultados posibles en la
salud causados por teléfonos celulares?
Junto con la entidad U.S. National Toxicology Program y con otros grupos de
investigadores mundiales, la FDA está trabajando para asegurar que se están
conduciendo estudios altamente prioritarios en animales para dirigir preguntas
sobre los efectos de la exposición RF. La FDA ha sido el participante líder en el
proyecto International Electromagnetic Fields (EMF) desde su inicio en el 1996, de
la entidad World Health Organization. Como resultado poderoso de este trabajo se
desarrolló una agenda detallada de las necesidades en la investigación que propulsó
el establecimiento de programas nuevos de investigaciones por todo el mundo. El
proyecto también ha ayudado a desarrollar una serie de documentos de información
pública sobre los asuntos EMF. La FDA y la Cellular Telecommunications & Internet
Association (CTIA) conducen un acuerdo formal denominado Cooperative Research
and Development Agreement (CRADA) para realizar investigaciones de la seguridad
en el uso del teléfono celular. La FDA provee una vista científica, consiguiendo las
opiniones de los expertos de las organizaciones académicas, industriales y
29
Mensaje de la FDA
gubernamentales. La investigación financiada por la CTIA es realizada por contratos
con investigadores independientes. La investigación inicial incluirá tanto los
experimentos en laboratorios como los estudios sobre usuarios de teléfonos
celulares. El proyecto CRADA también va a asesorar ampliamente los requerimientos
en los estudios bajo el contexto de los desarrollos de las investigaciones más
recientes por todo el mundo.
¿Qué medidas puedo realizar para reducir la radiofrecuencia irradiada por mi
teléfono celular a la que estoy expuesto?
Si existe algún riesgo de estos productos - y en este momento desconocemos tal
existencia - probablemente será muy mínimo. Sin embargo, si le concierne la
prevención de posibles riesgos, haga estos pasos sencillos para minimizar la
radiofrecuencia (RF). Puesto que el tiempo es un factor clave, en cuanto al nivel
de la exposición que una persona pueda recibir, minimizar el tiempo de uso del
teléfono celular reducirá la exposición a la RF.
Si tiene que extender su tiempo de conversación con su teléfono celular, podrá alejarse
del origen de la RF, puesto que el nivel de exposición RF reducirá dependiendo de la
distancia. Por ejemplo, podrá utilizar un auricular y llevar el celular apartado de su
cuerpo o usar un teléfono celular conectado a una antena remota.
Se reitera que los datos científicos no muestran que los teléfonos celulares son
peligrosos. Sin embargo, si le concierne la prevención de posibles riesgos, podrá
adoptar las medidas antes mencionadas para reducir el nivel de exposición a la
RF que se origina de los teléfonos celulares.
¿Significa un riesgo para los niños el uso de teléfonos celulares?
Las evidencias científicas no muestran peligro a los usuarios de teléfonos celulares,
incluso para los niños y jóvenes. Si desea realizar las medidas para reducir la exposición
a la radiofrecuencia (RF), las medidas anteriormente mencionadas servirían para
los niños y jóvenes que usan teléfonos celulares. Reducir del tiempo de uso del
celular y aumentar la distancia entre el usuario y el origen de la radiofrecuencia
minimizará la exposición a la RF. Ciertos grupos patrocinados por otras entidades
nacionales gubernamentales han recomendado que los niños no utilicen teléfonos
celulares. Por ejemplo, en diciembre 2000, el gobierno del Reino Unido distribuyó
folletos conteniendo dicha recomendación. Se han dado cuenta que no existen
ninguna evidencia que el uso de teléfonos celulares pueda causar tumores cerebrales
u otras enfermedades. Su recomendación de que los niños limiten el uso de los
teléfonos celulares fue solamente a efecto preventivo; no fue basada en ninguna
evidencia de peligros para la salud.
30
Mensaje de la FDA
¿Reduce el riesgo de la exposición a la radiofrecuencia el uso de accesorios
manos libres con teléfonos celulares?
Puesto que no existen riesgos a exposición RF irradiada por teléfonos celulares, no
hay motivo para creer que el uso de equipos manos libres reducen los riesgos. Se
pueden usar los equipos manos libres con los teléfonos celulares por razones de
comodidad y confort. Estos sistemas reducen la posibilidad de que la cabeza absorba
la radiofrecuencia puesto que el teléfono, de donde se emite la radiofrecuencia, se
usa lejos de la cabeza. Por otro lado, si el teléfono se lleva en la cintura o en otra
parte del cuerpo durante su uso, entonces esa parte del cuerpo absorberá más la
energía radiofrecuencia. Se requieren que los teléfonos celulares vendidos en
Estados Unidos cumplan con las medidas de seguridad sin importar si son usados
contra la cabeza o portados con cualquier parte del cuerpo. Cualquiera de la
configuración deben cumplir con los límites de seguridad.
¿Sirven como deben los accesorios de teléfonos que son promocionados como
protector para la cabeza contra la radiación emitida por RF?
Puesto que no existen riesgos de exposición a la radiofrecuencia emitida por los
teléfonos celulares, no hay motivo para creer que los accesorios que protegen la
cabeza contra dichas emisiones de verdad reducen los riesgos. Ciertos productos
que son promocionados como protectores contra la radiofrecuencia usan fundas
especiales para teléfonos, mientras hay los que no tengan blindaje más que accesorios
metálicos adjuntados al teléfono. Según las investigaciones, en general estos
productos no funcionan como son promocionados. Estos denominados "blindajes",
no como los equipos "manos libres", podrían interferir con la operación debida del
teléfono. El telefóno podría ser provocado a elevar su potencia que podría incrementar
la absorción de radiofrecuencia. En febrero 2002, la entidad Federal Trade Commission
(FTC) denunció dos empresas que vendieron dispositivos que, como ellas alegaban,
protegían a los usuarios de teléfonos celulares contra la irradiación e hicieron
declaraciones falsas y reclamaciones no confirmadas. Según la FTC, estos demandados
carecían de una base razonable para respaldar su demanda.
¿Cómo asesora FCC la radiofrecuencia de un teléfono celular?
Después de otorgar la licencia de mercadeo de un teléfono celular particular, la FCC
realiza, de vez en cuando, pruebas "post-grant" (después de otorgar) para determinar
si la producción de los modelos del teléfono están cumpliendo los requerimientos
estipulados por la FCC. Al fabricante de un teléfono celular que no reúna los
requerimientos estipulados por la FCC se le puede requerir que retire el uso del
teléfono celular y que abone el costo de la compra o que reponga el teléfono, y
podría ser sometido a sanciones delictivas o civiles. Además, si el teléfono significa
un riesgo de peligro para el usuario, la FDA también puede realizar una acción
regulatoria. La prueba "post-grant" más importante, desde la perspectiva del
31
consumidor, es la de las irradiaciones RF del teléfono. FCC mide el nivel de Specific
Absorption Rate (SAR-TAE - Tasa de Absorción Específica) del teléfono, siguiendo
un protocolo de pruebas muy riguroso. Como ocurre con casi cualquier medición
científica, es posible que la medición de prueba pueda ser menos o más de la RF
actual irradiada por el teléfono. Esta diferencia entre la medición de prueba de RF y
la radiación RF actual es debido al hecho de que las mediciones de pruebas son
limitadas por la autenticidad del instrumento, puesto que los entornos de la medición
de prueba y del uso actual son diferentes, y por otros factores variables. Esta variación
inherente es denominado "incertidumbre de medición". Cuando FCC conduce una
medición "post-grant" de un teléfono celular, FCC se toma en cuenta de cualquier
incertidumbre para determinar la necesidad de una acción regulatoria. Este paso
asegura que cuando FCC toma acciones regulatorias, éstas tendrán una base
científica defendible y exacta.
El personal FDA revisó la metodología usada por FCC para medir la RF del teléfono
celular, y estuvo de acuerdo que es un paso aceptable, en vista de nuestro
entendimiento actual de los riesgos de las irradiaciones RF de los teléfonos
celulares. No se ha demostrado que las irradiaciones RF de los teléfonos celulares
presentan un riesgo dañino al usuario cuando la medida SAR es menos de los
límites de seguridad estipulados por FCC (un SAR de 1.6 w/kg). Aunque la medida
máxima de incertidumbre permitida por las normas actuales de medición fue
agregada al norma máxima permitida por SAR, el valor resultante de SAR podría
aparecer menos que cualquier nivel que pueda producir un resultado agudo.
Consiguientemente, el paso de FCC con incertidumbre de medición no resultará en
exponer a los usuarios a cualquier riesgo de la RF irradiada por los teléfonos celulares.
La FDA continúa a monitorear los estudios y literatura de reportes referentes a los
efectos severos de la RF de los teléfonos celulares, y referentes a los efectos crónicos
de exposición a largo plazo a la RF del teléfono celular (es decir, los riesgos que
emanan del uso de teléfonos celulares por muchos años). En caso de que una nueva
información da indicio a FDA a creer que un cambio en la política de medida de FCC
podría ser apropiado, FDA se pondrá en contacto con FCC y ambas agencias
trabajarán juntamente para desarrollar un paso mutualmente aceptable.
Actualizado 29 de julio de 2003
Printed in / Impreso en 06/06
32
Contents
For your safety..............................................................................6
About your device......................................................................................6
Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in progress.
USE SENSIBLY
Use only in the positions as explained in the product documentation. Do not touch the antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display
and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until
given permission to do so.
About your device
The wireless device described in this guide is approved for use on the GSM 850/900/1800/1900, UMTS 2100 network. Contact your
service provider for more information about networks.
When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including
copyrights.
Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified,
transferred, or forwarded.
Your device supports internet connections and other methods of connectivity. Like computers, your device may be exposed to viruses,
malicious messages and applications, and other harmful content. Exercise caution and open messages, accept connectivity requests,
download content, and accept installations only from trustworthy sources. To increase the security of your devices, consider installing,
using, and regularly updating antivirus software, firewall, and other related software on your device and any connected computer.
Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on
when wireless device use may cause interference or danger.
The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file
formats can be viewed or modified.
Network services
To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features
are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can
use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have
limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and
services.
Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear
on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your
service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as e-mail, browsing,
multimedia messages, and content downloading, require network support for these technologies.
Enhancements, batteries, and chargers
Always switch the device off and disconnect the charger before removing the battery.
Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3,
AC-4 and AC-5 chargers and from ACP-7, ACP-8, ACP-9, ACP-12, LCH-12 and AC-1 when used with the CA-44 adapter.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other
types may invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp
and pull the plug, not the cord.
The images in this guide may differ from your device display.
Model number: Nokia E61i-1.
Hereinafter referred to as Nokia E61i.
When using this product in Latin America, you may refer to the warranty and reference leaflet for specific web support addresses.
Insert the SIM card and battery
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or
other vendor.
1. Always switch the device off and disconnect the charger before removing the battery.
With the back of the device facing you, press and hold the cover release button (1), and slide the back cover in the direction
of the arrow (2).
2. If the battery is installed, lift the battery from the battery compartment in the direction of the arrow to remove it .
3. Ensure that the beveled corner of the SIM card is pointing towards the bottom of the device and that the contact area on the
card is facing the device, then insert the SIM card (1) into the SIM card slot (2).
4. To insert the battery, align the contacts of the battery with the corresponding connectors on the battery compartment, insert
in the direction of the arrow, and gently click the battery into place.
5. To replace the back cover, slide the cover in the direction of the arrow.
Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS
(network service) mobile phones. Contact your service provider for more information.
This applies only if you are in a UMTS/3G network. Contact your service provider for more information about network type. See
"UMTS (3G)," p. 49.
Insert and remove a memory card
Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for
memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and
the device and corrupt data stored on the card.
If you have a memory card, follow the instructions to insert and remove it.
See "Memory," p. 17.
1. Remove the battery cover.
2. Insert the memory card (1) fully into the memory card slot (2) to lock in place. Ensure that the contact area is facing down.
3. Replace the battery cover.
4. To remove the memory card, press the power key and select Remove mem. card. Remove the battery cover and push the
memory card into the device to activate the release mechanism. Then, gently pull the card out of your device.
Charge the battery
1. Connect the charger to a wall outlet.
2. Connect the charger to the bottom of the device. The battery indicator bar starts scrolling on the display. If the battery is
completely discharged, it may take a few minutes before the charging indicator is shown. The device can be used while
charging.
3. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the device, then from the outlet.
When the battery charge level is too low for operation, the device switches itself off.
1. To switch the device on, press and hold the power key.
2. If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select
OK.
A UPIN code and USIM card are used only if you are in a UMTS/3G network. Contact your service provider for more information
about network type. See "UMTS (3G)," p. 49.
3. To switch the device off, press and hold the power key.
Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message,
multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or
use the Sett. wizard application.
The device can be used without the network dependant phone functions when a SIM card is not inserted or when the Offline
profile is selected.
Enter first settings
When you power on the device for the first time, or when you switch on the device after the battery has been removed for a
longer period, your device asks for a city, time, and date. You can change these settings later in Clock.
1. Select the city in which you are located from the list and OK. To browse for a city, start to type the name of the city, or scroll
to a city. It is important to select the correct city, because scheduled calendar entries that you create can change if the new
city is located on a different time zone.
2. Set the time, and select OK.
3. Set the date, and select OK.
Keys and parts
1 — Power key
2 — Navi™ scroll key (hereinafter the scroll key)
3 — Right selection key
4 — End key
5 — Own key
6 — E-mail key
7 — Backspace key
8 — Enter key
9 — Chr key
10 — Shift key
11 — Ctrl key
12 — Spacebar
13 — Function key
14 — Phone keypad
15 — Menu key
16 — Contacts key
17 — Call key
18 — Left selection key
19 — Notification light and light sensor
1 — Loudspeaker
2 — Volume keys
3 — Voice key
Key functions
Selection keys
Press either selection key to use the command that is shown on the display above the selection keys. See "Standby
modes," p. 13. To change the shortcuts in the standby mode, select Menu > Tools > Settings > Phone > Standby mode, and
the applications in Left selection key and Right selection key.
Scroll key
Press the scroll key to edit or make a selection, or to access commonly used functions in the different applications. Use the scroll
key to scroll left, right, up, down, or to move around on the display (for example, when browsing). In the standby mode, scroll
with or press the scroll key for different shortcuts. To change the shortcuts, select Menu > Tools > Settings > Phone > Standby
mode > Active standby > Off, and the shortcuts in Navigation key right, Navigation key left, Navigat. key down, Navigation
key up, and Selection key.
Call and end keys
To answer a call, press the call key. In the standby mode, press the call key to access the Log.
To reject a call, end active calls and held calls, and close applications, press the end key. Press and hold the end key to end data
connections (GPRS, data call).
Own key
You can configure the Own key to open any application. To select the application you want the Own key to open, select Menu >
Tools > Own key.
E-mail key
To access your default e-mail inbox, press the e-mail key. If you have not set up an e-mail account, the mailbox guide opens to
help you. If you press and hold the e-mail key, your default e-mail editor opens. The functionality depends also on your mailbox
service provider. You can configure the e-mail key yourself. See "Configure the e-mail key," p. 23.
Chr key
To insert characters that you cannot insert with the keypad, press the Chr key when you are writing.
To scroll through a list of accented characters, press and hold the Chr key, then press the other key as many times as you need
to get the accented character you want.
Shift keys
To enter an uppercase letter in the middle of lowercase letters or a lowercase letter in the middle of uppercase letters, press
the shift key so that
To enter only uppercase letters, press the shift key twice, so that
again, press the shift key twice, so that is shown on the display.
To select text, press the shift key, and scroll left or right.
is shown on the display, then the key you want.
is shown on the display. To enter only lowercase letters
Function key
To enter a character or function marked with color, press the function key, so that is shown on the display, then the key you
want.
To enter only characters marked with color, press the function key twice so that is shown on the display, then the characters
you want.
To activate Bluetooth, press the function key and Ctrl key simultaneously. To deactivate Bluetooth, press the function key and
Ctrl key again.
To activate infrared, press the function key and Chr key simultaneously.
Menu key
Leaving applications running in the background increases the demand on battery power and reduces the battery life. To access
the applications in your device, press the menu key in the standby modes. To return to Menu from an application, leaving the
application open in the background, press the menu key. Press and hold the menu key to see a list of the active applications
and switch between them. In this user guide, "select Menu" refers to pressing this key.
Contacts key
To access the Contacts directory from any application, press the contacts key.
Voice key
Press the voice key to open Recorder. Press and hold the voice key to use voice commands.
See "Voice commands," p. 41.
Camera
You can take photos or record video clips with the built-in camera. The camera lens is on the back of the device, and the display
works as a viewfinder.
To take a picture, select Menu > Media > Camera. Use the display as a viewfinder, aim at your subject,
and press the scroll key. The device saves the photo in the default folder, or in the folder you have
defined.
Lock the keys
When the keyguard is on, calls may be possible to the official emergency number programmed into your device.
Lock the keys to prevent accidental keypresses.
To lock the keys in the standby mode, press the left selection key (1) and the function key (2). To
unlock, press the left selection key and the function key again.
Tip: To lock the keys in the Menu or in an open application, press the power key briefly,
and select Lock keypad. To unlock, press the left selection key and the function key.
When the device is locked, calls may be possible to the official emergency number programmed
into your device. You can also lock the device in the standby mode using your lock code. Press the
power key, select Lock phone, and enter your lock code. The default lock code is 12345. To unlock,
press the left selection key, enter your lock code, and press the scroll key.
Connectors
Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset
where it can endanger your safety.
Pop-Port™ connector for headset and other
enhancements
Your device has internal antennas.
Note: As with any radio transmitting device, avoid touching an antenna unnecessarily when the antenna is in use. For
example, avoid touching the cellular antenna during a phone call. Contact with a transmitting or receiving antenna
affects the quality of the radio communication, may cause the device to operate at a higher power level than otherwise
needed, and may reduce the battery life.
The picture shows the normal use of the device at the ear for voice calls.
Volume control
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
To adjust the volume during a call, press the volume keys.
To adjust the volume when using the loudspeaker, press the volume keys.
About the display
A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display.
Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.
Standby modes
Your device has two different standby modes: active standby mode and standby mode.
Active standby mode
After you have switched on your device and it is ready for use, but you have not entered any characters or made other selections,
the device is in the active standby mode. In the active standby mode, you can view your service provider and network, different
indicators such as indicators for alarms, and applications you want to access fast. You can, for example, view calendar information
such as the day's meetings in the active standby mode. Scroll to the information, and press the scroll key to open calendar for
details.
To select the applications that you want to access from active standby, select Menu > Tools >
Settings > Phone > Standby mode > Active standby apps.. Scroll to the different shortcut settings,
and press the scroll key. Scroll to the desired application, and press the scroll key.
You can see the messages in a messaging folder such as inbox or mailbox in the active standby mode.
Select Menu > Tools > Settings > Phone > Standby mode and the folders in Active standby
mailbox.
Tip: You can also see different notifications, such as missed calls, unread messages, or voice
mails in the active standby mode. With these notifications, you can see the communication
status of your device with one glance. Select the plug-ins in Menu > Tools > Settings >
Phone > Standby mode > Active standby plug-ins. The available plug-ins may vary.
To use the basic standby mode, select Menu > Tools > Settings > Phone > Standby mode > Active standby > Off.
To call your voice mailbox (network service), press and hold 1.
To open Services and connect to the Web, press 0.
Standby mode
In the standby mode, you can see different information, such as your service provider, time, and different indicators, including
indicators for alarms.
In the standby mode, you can use the following shortcuts. These shortcuts are usually not available in the active standby mode,
where the scroll key is used for normal scrolling.
To view the most recently dialed numbers, press the call key. Scroll to a number or name, and press the call key again to call the
number.
To call your voice mailbox (network service), press and hold 1.
To view notes, scroll right.
To write and send text messages, scroll left.
To open the Clock application, press the scroll key.
To change the profile, press the power key briefly, scroll to the profile you want, and press the scroll key to activate the profile.
To open Services and connect to the Web, press 0.
To change these shortcuts, select Menu > Tools > Settings > Phone > Standby mode.
Display indicators
The device is being used in a GSM network. The bar next to the icon indicates the signal strength of the network at your
current location. The higher the bar, the stronger the signal.
The device is being used in a UMTS network (network service). The bar next to the icon indicates the signal strength of the
network at your current location. The higher the bar, the stronger the signal.
This applies only if you are in a UMTS/3G network.
The battery charge level. The higher the bar, the stronger the charge in the battery.
You have one or more unread messages in the Inbox folder in Messag..
You have received new e-mail in the remote mailbox.
The device keypad is locked.
The device is locked.
You have one or more missed phone calls.
An alarm is active.
You have selected the silent profile, and the device does not ring for an incoming call or message.
Bluetooth is activated.
An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection
has been lost.
A GPRS or EGPRS packet data connection is available.
A UMTS packet data connection is available.
This applies only if you are in a UMTS/3G network.
This applies only if you are in a UMTS/3G network.
A GPRS or EGPRS packet data connection is on hold.
A UMTS packet data connection is on hold.
This applies only if you are in a UMTS/3G network.
You have set the device to scan for wireless LANs, and a wireless LAN is available.
A wireless LAN connection is active in a network that does not have encryption.
A wireless LAN connection is active in a network that has encryption.
The device is registered with a SIP server, and you can make net calls.
Your device is connected to a PC with a USB data cable.
A data call is active.
and Indicate the phone line that you have selected, if you have subscribed to two phone lines (network service).
All calls are forwarded to another number.
A headset is connected to the device.
The connection to a headset with Bluetooth connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
TTY is connected to the device.
Your device is synchronizing.
You have an ongoing push to talk connection. If push to talk is not available from your wireless service provider, it may
not appear in the menu of your device.
, , Indicators for the selected character mode.
You have pressed the function key once to insert a number or a character marked with color on the keypad.
You have pressed the function key twice to insert only numbers or characters marked with color on the keypad.
You have pressed the shift key once to insert an uppercase letter in the middle of lowercase letters, or a lowercase letter in
the middle of uppercase letters.
Help and tutorial
You can find answers to your questions while using the device even with no user guide present, because your device includes
both a help and a tutorial.
Device help
You can access the device help from an open application or from the Menu. When you have an application open, select
Options > Help to read instructions for the current view.
To open help from Menu, select Menu > Help > Help. In Help, you can select categories for which you want to see instructions.
Scroll to a category, such as Messaging, and press the scroll key to see what instructions (help topics) are available. While you
are reading the topic, scroll left or right to see the other topics in that category.
When you are reading the instructions, press and hold the menu key to switch between help and the application that is open
in the background.
Tutorial
The tutorial provides you information about your device and shows you how to use it. Some tutorial content may be located
on a memory card. You must insert the memory card in the device before you can access it.
To access the tutorial in the Menu, select Menu > Help, open Tutorial and the section you want to view.
Nokia PC Suite
You can install Nokia PC Suite from the CD-ROM or from the Web. Nokia PC Suite can be used only with Windows 2000 and
Windows XP. With Nokia PC Suite, you can make backups, synchronize your device with a compatible computer, move files
between your device and a compatible computer, or use your device as a modem.
The Menu is a starting point from which you can open all applications in the device or on a memory card. The Menu contains
applications and folders, which are groups of similar applications. Use the scroll key to scroll up and down on the screen.
Applications that you install are saved in the Installat. folder by default.
To open an application, scroll to it, and press the scroll key.
To view the applications in a list, select Options > Change view > List. To return back to the grid view, select Options > Change
view > Grid.
To view the memory consumption of different applications and data stored on the device or memory card and to check the
amount of free memory, select Options > Memory details and the memory.
To rearrange the folder, scroll to the application you want to move, and select Options > Move. A check mark is placed beside
the application. Scroll to a new location, and select OK.
To move an application to a different folder, scroll to the application you want to move to another folder, and select Options >
Move to folder, the new folder, and OK.
To download applications from the Web, select Options > App. downloads.
To create a new folder, select Options > New folder. You cannot create folders inside folders.
To rename a new folder, select Options > Rename.
Tip: To switch between several open applications, press and hold the menu key. The application-switching window
opens and displays the open applications. Scroll to an application, and press the scroll key to switch to it.
Scroll and make selections
Use the scroll key to move and make selections. With the scroll key, you can move up, down, left and right in the Menu or in
different applications or lists. You can also press the scroll key to open applications, files, or edit settings.
To select text, press and hold the shift key, and scroll left or right until you have selected the text.
To select different items, such as messages, files, or contacts, scroll up, down, left or right to highlight the item you want to
select. Select Options > Mark/Unmark > Mark to select one item or Options > Mark/Unmark > Mark all to select all items.
To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side
of the object.
Write text
Your device has a full keyboard. Most common punctuation marks either have a key of their own or they can be entered by
pressing a combination of keys.
, and indicate the selected case.
Some characters (for example, punctuation marks and symbols) are marked with color on the keys. To insert a character marked
with color, press the function key, and the key that has the character you want.
To insert a number, press the function key so that is shown on the display, and a key with a number on the color background.
To lock the function key and insert only numbers, press the function key twice so that is shown on the display.
To erase a character, press the backspace key. Press and hold the backspace key to clear more than one character.
To open a list of special characters, press the Chr key. Use the scroll key to scroll through the list and select a character.
To add characters by using other keys such as "A" or "O", press and hold the Chr key and simultaneously press the other key as
many times as is needed before the character you want is shown.
To switch between the different character cases, press the shift key, so that is shown on the display.
Copy and paste text
1. To select letters and words, press and hold the shift key. At the same time, scroll in the direction necessary to highlight the
word, phrase, or line of text you want to copy. As the selection moves, the text is highlighted.
2. To copy the text to the clipboard, press Ctrl+C. To insert the text into a document, press Ctrl+V.
B a s i c i n f o r m a t i o n a b o u t y o u r d e v i c e
When you write text, you can change the writing language. When you are writing and press Chr+a key several times to use a
specific character, changing the writing language gives you access to different characters.
For example, if you are writing a message using a non-Latin alphabet and want to add a person's name using Latin alphabets,
select Options > Writing language and a writing language that uses Latin characters.
Common actions in several applications
You can find the following actions in several applications:
To switch between open applications, press and hold the menu key to see a list of open applications. Select an application.
To change the profile or switch off or lock the device, press the power key briefly.
To save a file, select Options > Save. There are different save options depending on the application you use.
To send a file, select Options > Send. There are different send options depending on the application you use, such as e-mail or
multimedia messages and infrared or Bluetooth connectivity.
To print to a compatible printer, select Options > Printing options > Print. You can preview items that you want to print, or
edit the way printed pages look. Before you can print, you must define a compatible printer to your device.
"Print," p. 62.
To delete a file, press the backspace key, or select Options > Delete.
See
Memory
There are two types of memory into which you can save data or install applications: device memory and removable memory.
Device memory
Memory that is built into your device is a dynamic memory pool shared by many applications. The amount of internal memory
available varies but cannot be increased past the maximum factory setting. Data stored on the device, such as software
applications, pictures, and music, consume device memory.
Removable memory
Removable memory is data storage that is not built into your device, such as a SIM card or a memory card. A SIM card stores
different information, such as information about the network operator and contacts. A memory card serves as external storage
media for software applications, pictures, music, contacts, text, or any other form of electronic data. High-capacity memory
cards are available.
Memory details
Select Menu, and Options > Memory details and Phone mem. or Memory card.
You can see how much memory is currently in use, how much free memory remains, and how much memory is consumed by
each data type. For example, you can see how much memory your e-mail messages, text documents, or calendar appointments
consume.
Tip: To ensure that you have adequate memory, you should regularly delete or transfer data to a memory card or PC.
Memory card
Your Nokia device supports the FAT16 and FAT32 file systems for memory cards. If you use a memory card from another device
or if you want to ensure compatibility of the memory card with your Nokia device, you may need to format the memory card
with your Nokia device. However, all data in the memory card is permanently deleted if you format the memory card.
Format a memory card
When a memory card is formatted, all data on the card is lost permanently. Consult your retailer to find out if you must format
the memory card before you can use it. To format a memory card, select Options > Format mem. card. When formatting is
complete, enter a name for the memory card.
Back up and restore to the memory card
It is recommended to back up device memory regularly to the memory card. The information can be restored to your device
later. To back up information from device memory to a memory card, select Menu > Tools > Memory > Options > Backup
phone mem.. To restore information from the memory card to the device memory, select Menu > Tools > Memory >
Options > Restore from card.
If you cannot use a memory card in your device, you may have the wrong type of memory card, the card may not be formatted
for your device, or the card has a corrupted file system.
B a s i c i n f o r m a t i o n a b o u t y o u r d e v i c e
Tip: You can insert and remove a memory card without removing the battery or switching off the device.
Unlock a memory card
To open a locked memory card, select Options > Unlock memory card. Enter the password.
Installing applications
You can use Nokia PC Suite to install applications. Nokia PC Suite transfers the installation file to your device, and the installation
starts automatically. You can also download an installation file from the web, in which case the installation may start
automatically. If the installation does not start automatically, locate and select the installation file on your device, and press
the scroll key.
Voice aid
Select Menu > Tools > Voice aid.
The voice aid application reads text on the screen, allowing you to use basic functions of your device without looking at the
display.
Select from the following:
• Contacts — Hear the entries in your contacts list. Do not use this option if you have more than 500 contacts.
• Recent calls — Hear information on your missed and received calls, dialed numbers, and frequent calls.
• Voice mailbox — Retrieve and listen to your voice messages.
• Dialer — Dial a telephone number.
• Clock — Hear the current time and date.
To hear more options, select Options.
Hear your messages
Message reader readiness
Message reader reads your received text messages aloud. The application is available in your device in English. To download
additional languages, visit www.nokia.com.
Select Menu > Office > Msg. reader.
Select the text message you want to be read, and select Play. You can also activate Msg. reader by pressing and holding the left
selection key when you receive a text message.
To start reading the next message in your Inbox, scroll right. To start reading the previous message, scroll left.
To pause the reading, press the left selection key briefly. To continue, press the left selection key briefly again.
To end the reading, press the end key.
Speech
To edit the settings for the synthesized speech, select Menu > Tools > Speech.
Select from the following options:
• Language — Set the language for the speech.
• Voice — Set the voice for the speech. The voice is language dependent.
• Voice settings — Adjust the voice properties.
Voice properties
To edit the voice properties for the synthesized speech, select Menu > Tools > Speech > Voice settings.
Select from the following options:
• Speed — Select the desired speech rate.
• Volume — Set the volume level for the speech.
Voice management
To manage the voices available for the selected language, select Menu > Tools > Speech, and scroll right.
Scroll to a voice, select Options and from the following:
• Play voice — Listen to the selected voice.
• Voice details — View information about the voice.
B a s i c i n f o r m a t i o n a b o u t y o u r d e v i c e
Profiles
Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network
coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls,
you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.
Select Menu > Tools > Profiles.
You can adjust and customize the ringing tones, alert tones, and other device tones for different events, environments, or caller
groups.
To customize a profile, scroll to the desired profile in the list, and select Options > Customize.
Define the following settings:
• Ringing tone — Select a ringing tone from the list, or select Tone downloads to open a bookmark folder containing a list of
bookmarks for downloading tones using the browser. To listen to the selected tone, select Play. If you have two alternate
phone lines in use, you can specify a ringing tone for each line.
• Video call tone — Select a ringing tone for video calls. This option is available only if you have UMTS network coverage. See
"UMTS (3G)," p. 49.
• Say caller's name — Activate the text-to-speech ringing tone feature. When someone from your contacts list calls you, the
device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone.
• Ringing type — Select how you want the ringing tone to alert.
• Ringing volume — Select the volume level of the ringing tone.
• Message alert tone — Select a tone for received text messages.
• E-mail alert tone — Select a tone for received e-mail messages.
• Vibrating alert — Select whether you want the device to vibrate when you receive a call.
• Keypad tones — Set the volume level of the device keypad tones.
• Warning tones — Set the warning tones on or off.
• Alert for — You can set the device to ring only upon calls from phone numbers that belong to a selected contact group. Phone
calls coming from outside that group have a silent alert.
• Profile name — You can give a name to a new profile or rename an existing profile. The Normal and Offline profiles cannot
be renamed.
The Offline profile prevents your device from accidentally switching on, sending or receiving messages, or using Bluetooth;
it also closes any Internet connection that may be in operation when the profile is selected. The Offline profile does not
prevent you from establishing a wireless LAN connection at a later time, so comply with any applicable safety requirements
when establishing and using wireless LAN connections.
To change a profile, scroll to the desired profile in the list, and select Options > Activate. If you select the Offline profile, you
cannot send or receive messages or use WLAN to read your e-mails.
To create a new profile, select Options > Create new, and define the settings.
Select ringing tones
To set a ringing tone, scroll to a profile, and select Options > Customize > Ringing tone. Select a ringing tone from the list or
select Tone downloads to open a bookmark folder containing a list of bookmarks for downloading tones using the browser.
Any downloaded tones are saved to Gallery.
To play the ringing tone for a selected contact group only, scroll to a profile, and select Options > Customize > Alert for, and
select the desired group. Phone calls coming from outside that group have a silent alert.
To browse for a message tone, scroll to a profile and select Options > Customize > Message alert tone.
To listen to the selected tone, select the tone from the list and wait for the tone to play.
Change enhancement settings
Scroll to an enhancement, and select Options > Open.
Change the default profile for the enhancement.
To change enhancement settings, select an enhancement and Options > Open.
Themes
Select Menu > Tools > Themes.
You can change the look of the display of your device.
To change the look of the display, highlight the theme you want to use, and select Options > Apply.
B a s i c i n f o r m a t i o n a b o u t y o u r d e v i c e
To edit a theme, highlight the theme you want to edit, and select Options > Edit. Select Wallpaper to change the background
image in the standby modes, or Power saver to use a text or the date and time as a power saver that appears on the display
when no key presses have been made for a some time.
To download themes, you need to establish a network connection that allows you to download themes from Internet sources
that are compatible with your device.
To download a theme, select Theme downloads. Enter the link from which you want to download your theme. Once the theme
is downloaded you can preview, activate, or edit it.
To preview a theme, highlight the theme you want to preview, and select Options > Preview. Select Apply to start using the
new theme.
Search
Select Menu > Office > Search.
With Search, you can search for information in your contacts, notes, calendar appointments, to-do notes, e-mail messages,
multimedia messages, and text messages. You can also search for files by the file names in your device memory and memory
card.
1. Select the content types you want to search in. To remove the selection, select it again. To include all content types in your
search, select Select all. To remove all content types, select Unselect all.
2. Enter your search keywords or some part of the keywords. To include two words in your search, separate them with a space.
You will only find items that contain both keywords.
3. Select Search.
Tip: Wildcards may help you find items. In your search keyword, use ? to substitute a single character and * to substitute
zero or more characters. If you use the ? or * wildcard, you must add * to the beginning and end of a search keyword,
for example, *s?all* ("shall") or *dev*ment* ("development").
To view the search results from your previous search, select Options > Previous results.
Notification light
You can set the notification light on the cover of your device to blink when you have received a new message or when you have
missed a phone call.
To define the notification light settings, select Menu > Tools > Settings > Phone > Notification light.
To set the time how long you want the notification light to blink, scroll to Blink light for and press the scroll key. To select
whether you want to be notified of new short messages, multimedia messages, e-mail messages, and missed phone calls, scroll
to Notified events and press the scroll key.
You can transfer content, such as contacts, from a compatible Nokia device to your Nokia E61i using Bluetooth connectivity or
infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization,
you can also synchronize data between the other device and your Nokia E61i.
Transfer data with Bluetooth or infrared
Tip: If you transfer data from your previous device, the device may require you to insert the SIM card. Your Nokia E61i
does not need a SIM card when transferring data.
To start transferring data from a compatible device, select Menu > Tools > Transfer > Transfer data.
Bluetooth connectivity
1. In the information view, select Continue.
2. Select Via Bluetooth. Both devices must support the selected connection type.
3. Activate Bluetooth in your other device, and select Continue in your Nokia E61i to start searching for devices with active
Bluetooth connectivity.
4. Select Stop in your Nokia E61i after it has found your other device.
5. Select your other device from the list. You are asked to enter a passcode (1 to 16 digits) on your Nokia E61i. The passcode is
used only once to confirm this connection.
6. Enter the code on your Nokia E61i, and select OK. Enter the passcode on your other device, and select OK. The devices are
now paired. See "Pair devices," p. 51.
For some phone models, the Transfer data application is sent to your other device as a message. To install Transfer data on
your other device, open the message, and follow the instructions on the display.
7. From your Nokia E61i, select the content you want to transfer from your other device, and OK.
Infrared connectivity
1. In the information view, select Continue.
2. Select Via infrared. Both devices must support the selected connection type.
3. Connect the two devices. See "Infrared," p. 52.
4. From your Nokia E61i, select the content you want to transfer from your other device, and OK.
Content is copied from the memory of the other device to the corresponding location in your device. Copying time depends on
the amount of data to be transferred. You can also cancel and continue later.
The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transfer
earlier. The items that you can transfer vary depending on the other device.
Synchronize data with another device
If you have previously transferred data to your Nokia E61i, and your other device supports synchronization, you can use
Transfer to keep the data of the two devices up to date.
1. Select Phones, and press the scroll key.
2. Scroll to the device from which you transferred data, and press the scroll key.
3. Select Synchronize, and press the scroll key. The devices start synchronizing using the same connection type that you selected
when you originally transferred data. Only the data that you originally selected for data transfer is synchronized.
To modify the data transfer and synchronization settings, select Synchronize, scroll to a device, press the scroll key, and select
Select Menu > Messag..
In Messaging (network service), you can send and receive text messages, multimedia messages, and e-mail messages. You can
also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands.
Before sending or receiving messages, you may need to do the following:
• Insert a valid SIM card in the device and be located in a service area of the cellular network.
• Verify that the network supports the messaging features you want to use and that they are activated on your SIM card.
• Define Internet access point (IAP) settings on the device. See "Access points," p. 81.
• Define e-mail account settings on the device. See "E-mail account settings," p. 33.
• Define SMS settings on the device. See "Text message settings," p. 32.
• Define MMS settings on the device. See "Multimedia message settings," p. 32.
The device may recognize the SIM card provider and automatically configure some of the message settings. If not, you may need
to define the settings manually, or contact your service provider, network operator, or Internet service provider to configure
the settings.
The Messag. application displays each type of messaging folder in a list format with the newest message displayed first in each
folder.
Select one of the following:
• New message — Create and send a new text, multimedia, or e-mail message.
• Inbox — View received messages, except e-mails and cell broadcast messages.
• My folders — Create your own folders to store messages and templates.
• Mailbox — View and reply to received e-mail.
• Drafts — Store messages that have not been sent.
• Sent — Store messages that have been sent.
• Outbox — View messages waiting to be sent.
• Reports — View information about the delivery of sent messages.
Organize messages
To create a new folder to organize your messages, select My folders > Options > New folder. Enter the folder name, and select
OK.
To rename a folder, select the folder and Options > Rename folder. Enter the new folder name, and select OK. You can only
rename folders that you have created.
To move a message to another folder, open the message, and select Options > Move to folder, the folder, and OK.
To sort messages in a specific order, select Options > Sort by. You can sort the messages by Date, Sender, Subject, or Message
type.
To view the properties of a message, select the message and Options > Message details.
Search for messages
To search for a message, open the folder in which you want to search, select Options > Find. Enter the search term, and select
OK.
Text message center settings
Select Options > Settings > Text message > Message centers.
To edit message centers, select the message center, and Options > Edit.
To add new message centers, select Options > New msg. center.
To delete message centers, select the message center, and press the backspace key.
E-mail messages
To receive and send mail, you must have a remote mailbox service. This service may be offered by an Internet service provider,
a network service provider, or your company. Your device is compliant with Internet standards IMAP4 (revision 1) and POP3,
and a range of e-mail solutions. Other e-mail providers may offer services with different settings or features than those described
here.
Before you can send, receive, retrieve, reply to, and forward mail on your device, you must also do the following:
• Configure an Internet access point (IAP). Access points may already be configured in your device. See "Access
points," p. 81.
• Set up an e-mail account, and define the e-mail settings correctly. Depending on your device, you can use the mailbox guide,
settings wizard, or define the settings manually.
Follow the instructions from your remote mailbox and Internet service providers. Contact your network and Internet service
providers or operator for the correct settings.
Set up your e-mail with the mailbox guide
If you select Mailbox in the messaging main view and have not set up your e-mail account, you are prompted to do so. To start
setting up the e-mail account with the mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select Next.
Tip: POP3 is a version of the post office protocol that is used to store and retrieve e-mail or Internet mail messages.
IMAP4 is a version of the Internet message access protocol that lets you access and manage e-mail messages while
the messages are still on the e-mail server. You can then choose which messages to download to your device.
3. In My e-mail address, enter your e-mail address. Select Next.
4. In Incoming mail serv., enter the name of the remote server that receives your e-mail, and select Next.
5. In Outgoing mail serv., enter the name of the remote server that sends your e-mail, and select Next. Depending on your
mobile operator, you might have to use your mobile operator's outgoing mail server instead of your e-mail provider's.
6. In Access point, select the Internet access point your device should use when it retrieves the e-mails. If you select Always
ask, each time the device starts to retrieve e-mail, it asks which Internet access point it should use, but if you select an access
point, the device makes the connection automatically. Select Next.
Tip: If you select Select group, the device makes the connection automatically using the best available Internet
access point from the access point group. Select the access point group and Back to save the selection.
7. Enter a name for your new mailbox, and select Finish.
When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messag. main view.
Select your default mailbox
If you have defined several mailboxes, you can select one of them as your default mailbox. To define the default mailbox, select
Options > Settings > E-mail > Default mailbox and the mailbox.
If you have defined several mailboxes, you must select the mailbox that you want to use every time you start composing a new
e-mail message.
Configure the e-mail key
Your device has an e-mail key. With the e-mail key, you can access your default e-mail inbox or open your default e-mail editor
from the active standby. The functionality depends also on your mailbox service provider.
To configure the e-mail key, select Menu > Tools > E-mail key. Select the e-mail account that you want to use with the e-mail
key.
Connect to mailbox
E-mail addressed to you is not automatically received by your device, but by your remote mailbox. To read your e-mail, you must
first connect to the remote mailbox and retrieve the e-mails to your device.
To retrieve received e-mail messages to your device, select your mailbox in the Messag. main view. When the device asks Connect
to mailbox?, select Yes.
To view e-mail messages in a folder, scroll to the folder, and press the scroll key. Scroll to a message, and press the scroll key.
To retrieve e-mail messages to your device, select Options > Retrieve e-mail > New to retrieve new messages that you have
neither read nor retrieved, Selected to retrieve only messages you select from the remote mailbox, or All to retrieve all messages
not previously retrieved.
To disconnect from a remote mailbox, select Options > Disconnect.
View e-mail offline
Working offline means that your device is not connected to a remote mailbox. Managing your e-mail offline enables you to save
in connection costs and work in conditions that do not allow a data connection. Any changes you make in the remote mailbox
folders while offline take effect in your remote mailbox the next time you go online and synchronize. For example, if you delete
an e-mail from your device when offline, the e-mail is deleted from the remote mailbox the next time you connect to the mailbox.
1. Select Messag. > Options > Settings > E-mail. Select the e-mail account, and press the scroll key. Select Retrieval
settings > E-mail to retrieve > Msgs. & attachs. to retrieve entire messages with their attachments to your device.
2. Open your mailbox, and select Options > Retrieve e-mail. Select New to retrieve new messages that you have neither read
nor retrieved, Selected to retrieve only messages you select from the remote mailbox, or All to retrieve all messages not
previously retrieved. The device goes online and connects to the mailbox to retrieve the mails.
3. After retrieving the e-mails, select Options > Disconnect to return to the offline mode.
4. To view an e-mail message, scroll to it, and press the scroll key.
Some options require you to connect to your remote mailbox.
Tip: To subscribe to other folders in your remote mailbox, select E-mail settings > Retrieval settings > Folder
subscriptions. E-mail in all subscribed folders is updated when you retrieve e-mail from your remote mailbox.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise
be harmful to your device or PC.
To read a received e-mail, scroll to the e-mail, and press the scroll key.
To search for an e-mail in your mailbox, select Options > Find. Enter the search term, and select OK.
To open an attachment, select Options > Attachments. Scroll to the attachment, and press the scroll key.
To reply only to the sender of an e-mail, open the e-mail, and select Options > Reply > To sender.
To reply to all recipients of an e-mail, open the e-mail, and select Options > Reply > To all.
Tip: If you reply to an e-mail that contains attached files, the attachments are not included in the reply. If you forward
the received e-mail, attachments are included.
To delete an attachment from an e-mail that you are sending, select the attachment and Options > Remove.
To set the message priority, select Options > Sending options > Priority and from the available options.
To call the sender of the e-mail, open the e-mail, and select Options > Call.
To reply to the sender of the e-mail with a text message or multimedia message, open the e-mail, and select Options > Create
message.
To forward an e-mail, open the e-mail, and select Options > Forward.
Delete messages
To free up memory space on your device, regularly delete messages from the Inbox and Sent folders, and delete retrieved email messages.
To delete a message, scroll to it, and press the backspace key.
You can select to delete local e-mail messages on the device and keep the original on the server, or you can delete both the
local e-mail messages on the device and the original messages on the server.
To delete e-mails from the device only, select Options > Delete > Phone (header remains).
To delete e-mail both from the device and from the remote server, open an e-mail, and select Options > Delete > Phone and
server.
E-mail folders
If you create subfolders in your IMAP4 mailboxes on a remote server, you can view and manage these folders with your device.
You can only subscribe to folders in your IMAP4 mailboxes. Subscribing to folders in a remote mailbox allows you to view those
folders on your device.
To view folders in your IMAP4 mailbox, establish a connection, and select Options > E-mail sett. > Retrieval settings > Folder
subscriptions.
To view a remote folder, select a folder and Options > Subscribe. Every time you go online, the subscribed folders are updated.
This may take some time if the folders are large.
To update the list of folders, select a folder and Options > Update folder list.
Write and send e-mail
To write an e-mail, select Options > Add recipient to select the recipients' e-mail addresses from the contacts list, or enter the
e-mail addresses in the To field. Use a semicolon to separate entries. Scroll down, and use the Cc field to copy other recipients,
or the Bcc field to blind copy recipients. In the Subject field, enter the subject of the e-mail. Enter your e-mail message in the
text area, and select Options > Send.
To attach a file to an e-mail, select Options > Insert and the attachment you want to add. You can insert images, sound clips,
notes, and other files, such as office files.
To set the sending time for an e-mail message, select Options > Sending options > Send message. Select Immediately or When
conn. avail. if you are working offline.
E-mail messages are stored in the Outbox before sending. Unless the e-mail is sent immediately, you can open the Outbox and
suspend and resume sending or view the e-mail.
Text messages
Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent
as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks,
and characters from some language options, take up more space, limiting the number of characters that can be sent in a single
message.
Write and send text messages
Select Menu > Messag. > New message > Text message.
1. In the To field, press the scroll key to select recipients from Contacts, or enter the recipients' mobile phone numbers manually.
If you enter more than one number, separate the numbers with a semicolon.
2. Enter the text of the message. To use a template, select Options > Insert > Template.
3. Select Options > Send to send the message.
Sending options for text messages
To set sending options for the text message, select Options > Sending options.
Define the following:
• Msg. center in use — Select a message center to send the message.
• Character encoding — Select Reduced support to use automatic character conversion to another encoding system when
available.
• Receive report — Select Yes if you want that the network sends you delivery reports on your messages (network service).
• Message validity — Select how long the message center resends your message if the first attempt fails (network service). If
the recipient cannot be reached within the validity period, the message is deleted from the message center.
• Message sent as — Convert the message to another format, such as Text, Fax, Paging or E-mail. Change this option only if you
are sure that your message center is able to convert text messages into these other formats. Contact your network operator.
• Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number
(network service).
Reply to received text messages
To reply to a text message, open the message from the Inbox. Select Options > Reply. Enter the text of the message, and select
Options > Send.
To call the sender of a text message, open the message from the Inbox, and select Options > Call.
Text messages on the SIM card
Text messages may be stored on your SIM card. Before you can view SIM messages, you must copy the messages to a folder in
the device. After copying the messages to a folder, you can view them in the folder or delete them from the SIM card.
Select Options > SIM messages.
1. Select Options > Mark/Unmark > Mark or Mark all to mark every message.
2. Select Options > Copy.
3. Select a folder and OK to begin copying.
To view SIM card messages, open the folder where you copied the messages, and open a message.
To delete a text message from the SIM card, select the message, and press the backspace key.
Picture messages
Note: The picture message function can be used only if it is supported by your service provider. Only compatible devices
that offer picture message features can receive and display picture messages. The appearance of a message may vary
Select Menu > Messag..
To view a picture message, open the message from the Inbox folder.
Select Options and select from the following:
• Message details — View information about the message.
• Move to folder — Save the message in a different folder.
• Add to Contacts — Add the sender of the message to your contacts.
• Find — Find phone numbers and addresses that the message may contain.
Forward picture messages
1. In the Inbox, open a picture message and select Options > Forward.
2. In the To field, enter a recipient's number, or press the scroll key to add a recipient from Contacts. If you enter more than
one number, separate the numbers with a semicolon.
3. Enter the text of your message. The text can have 120 characters. To use a template, select Options > Insert > Template.
4. To send the message, press the call key.
Tip: To remove the picture from the message, select Options > Remove picture.
Multimedia messages
A multimedia message (MMS) can contain text and objects such as images, sound clips, or video clips.
Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may
vary depending on the receiving device.
Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your
device may have recognized the SIM card provider and automatically configured the multimedia message settings. If not, contact
your service provider. See "Multimedia message settings," p. 32.
Create and send multimedia messages
Select New message > Multimedia message.
1. In the To field, press the scroll key to select recipients from Contacts, or enter the recipients' mobile phone numbers or e-
mail addresses manually.
2. In the Subject field, enter a subject for the message. To change the fields that are visible, select Options > Address fields.
3. Enter the text of the message, and select Options > Insert object to add media objects. You can add objects such as Image,
Sound clip, or Video clip.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it
smaller so that it can be sent by MMS.
4. Each slide of your message can contain only one video or audio clip. To add more slides to your message, select Options >
Insert new > Slide. To change the order of slides in your message, select Options > Move.
5. To preview a multimedia message before sending it, select Options > Preview.
6. Press the scroll key to send the multimedia message.
Tip: You can also create multimedia messages directly from several applications, such as Contacts and Gallery.
To delete an object from a multimedia message, select Options > Remove.
Sending options for multimedia messages
Select Options > Sending options and from the following options:
• Receive report — Select Yes if you want to receive a notification when the message has been successfully delivered to the
recipient. Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.
• Message validity — Select how long the messaging center tries to send the message. If the recipient of a message cannot be
reached within the validity period, the message is removed from the multimedia messaging center. The network must support
this feature. Maximum time is the maximum amount of time allowed by the network.
Create presentations
Select New message > Multimedia message.
1. In the To field, press the scroll key to select recipients from Contacts, or enter the recipients' mobile phone numbers or e-
mail addresses manually.
2. Select Options > Create presentation and a presentation template.
Tip: A template may define which media objects you can include in the presentation, where they appear, and which
effects are displayed between images and slides.
3. Scroll to a text area and enter the text.
4. To insert images, sound, video, or notes in your presentation, scroll to the corresponding object area, and select Options >
Insert.
Tip: To move between object areas, scroll up and down.
5. To add slides, select Insert > New slide.
6. Select Options and from the following:
• Preview — See what your multimedia presentation looks like when it is opened. Multimedia presentations may only be
viewed in compatible devices that support presentations. They may appear different in different devices.
• Backgrnd. settings — Select the background color for the presentation and background images for different slides.
• Effect settings — Select effects between images or slides.
Creating multimedia presentations is not possible if MMS creation mode is Restricted. To change MMS creation mode, select
The available options may vary.
To send your multimedia presentation, press the scroll key.
Tip: To save the message in Drafts without sending it, select Done.
Receive and reply to multimedia messages
Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software
or otherwise be harmful to your device or PC.
Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your
device may have recognized the SIM card provider and automatically configured the multimedia message settings. If not, contact
your service provider. See "Multimedia message settings," p. 32.
If you receive multimedia messages containing objects unsupported by your device, you cannot open them.
1. To reply to a multimedia message, open the message from the Inbox, and select Options > Reply.
2. Select Options > To sender to reply to the sender with a multimedia message or Options > Via text message to reply to the
sender with a text message.
Tip: To add recipients to your reply, select Options > Add recipient to select the recipients of the message from the
contacts list, or enter the recipients' phone numbers or e-mail addresses manually in the To field.
3. Enter the text of the message, and press the scroll key to send it.
View presentations
Open the Inbox, scroll to a multimedia message that contains a presentation, and press the scroll key. Scroll to the presentation,
and press the scroll key.
To pause the presentation, press either selection key below the display.
After you pause the presentation or playing finishes, select Options and from the following:
• Open link — Open a Web link and browse the Web page.
• Activate scrolling — Scroll text or images too large to fit on the display.
• Continue — Resume playing the presentation.
• Play — Replay the presentation from the start.
• Find — Find phone numbers and e-mail or Web addresses the presentation may contain. You may use these numbers and
addresses to make calls, send messages, or create bookmarks, for example.
The available options may vary.
View media objects
Open the Inbox, scroll to a received multimedia message and press the scroll key. Select Options > Objects.
To view or play a media object, scroll to it, and press the scroll key.
Media objects and message attachments may contain viruses or other harmful software. Do not open any objects or attachments
unless you are sure of the trustworthiness of the sender.
To save a media object in its corresponding application, scroll to the object, and select Options > Save.
To send a media object to compatible devices, scroll to it, and select Options > Send.
Tip: If you receive multimedia messages that contain media objects your device cannot open, you may be able to send
these objects to another device such as a computer.
View and save multimedia attachments
To view multimedia messages as complete presentations, open the message, and select Options > Play presentation.
Tip: If you have selected a multimedia object in a multimedia message, to view or play them, select View image, Play
sound clip, or Play video clip.
To view the name and size of an attachment, open the message, and select Options > Objects.
To save a multimedia object, select Options > Objects, the object, and Options > Save.
Instant messaging
Select Menu > Connect. > IM.
Instant messaging (IM) (network service) allows you to converse with other people using instant messages and join discussion
forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register
to an IM service. Service providers may differ in their support of features.
If IM is not available from your wireless service provider, it may not appear in the menu of your device. Contact your service
provider for more information about signing up for IM services and costs for services. For more information on the availability
of IM settings, contact your network operator, service provider, or dealer.
You may receive the settings in a special text message from the network operator or service provider that offers the IM service.
You must save the settings to access the service that you want to use. You can also enter the settings manually.
Connect to an IM server
To converse with an IM user or users, and to view and edit your IM contacts, you must log into the instant messaging server.
Open IM, and select Options > Login. Enter your user ID and password, and press the scroll key to log in. You can obtain the
user name, password, and other settings to log in from your service provider when you register for the service.
Tip: To have instant messaging connect to the server automatically when you open the application, select Options >
Settings > Server settings > IM login type > On app. start-up.
Search IM users or IM groups
To search for IM users and user IDs, select IM contacts > Options > New IM contact > Search. You can search by User's name,
User ID, Phone number, and E-mail address.
To search for IM groups and group IDs, select IM groups > Options > Search. You can search by Group name, Topic, and
Members (user ID).
Scroll to a found IM user or group, and select Options and from the following:
• New search — Conduct another search.
• More results — View the remaining found IM users or groups, if any.
• Previous results — View the IM users or groups that were found in the previous search.
• Open conversation — Start a conversation with the user if the user is online.
• Add to IM contacts — Save the user in one of your IM contacts lists.
• Send invitation — Invite the IM user to an IM group.
• Blocking options — Prevent or allow the reception of messages from the IM user.
• Join — Join the IM group.
• Save — Save the group.
Conversations with a single IM user
The Conversations view shows a list of the individual conversation participants with whom you have an ongoing conversation.
Ongoing conversations are automatically closed when you exit IM.
To view a conversation, scroll to a participant, and press the scroll key.
To continue the conversation, enter your message, and press the scroll key.
To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options >
End conversation.
To start a new conversation, select Options > New conversation. You can start a new conversation with a different contact
while you are inside another active conversation. However, you cannot have two active conversations with the same contact.
To insert an image to an instant message, select Options > Send image, and select the image you want to send.
To save a conversation participant to your IM contacts, select Options > Add to IM contacts.
To save a conversation, while in the conversation view, select Options > Record chat. The conversation is saved as a text file
that can be opened and viewed in the Notes application.
To send automatic replies to incoming messages, select Options > Set auto reply on. You can still receive messages.
IM groups
The IM groups view shows a list of the IM groups that you have saved or to which you are currently joined.
IM groups is available only if you logged into an IM server when you opened the IM application, and the server supports IM
groups.
To create an IM group, select Options > Create new group.
To join an IM group or to continue a group conversation, scroll to the group, and press the scroll key. Enter a message, and press
the call key to send it.
To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new group.
To leave the IM group, select Options > Leave IM group.
You can also select Options and from the following:
• Group — Select Save to save the group to your IM groups, View participants to view the current members of the group, or
Settings to edit the group settings. You can only select this option if you have editing rights to the group.
• Login — Connect to an instant messaging server if you did not log in when you opened the application.
• Logout — Disconnect from the IM server.
• Settings — Edit instant messaging application or server settings.
To remove an IM group, press the backspace key.
Group conversations
To join the conversation, select a group.
Select Options and from the following:
• Insert smiley — Add a smiley in your message.
• Send private msg. — Send a private message to one or several, but not all, members of the IM group.
• Reply — Send a message only to the sender of the open message.
• Forward — Forward the open message to another IM group or contact.
• Send invitation — Invite an IM user to join the group.
• Leave IM group — End instant messaging in the group.
• Group — Select Save to save the group to your IM groups, View participants to view the current members of the group, or
Settings to edit the group settings. You can only select this option if you have editing rights to the group.
• Record chat — Save a copy of the group conversation.
To send a message, enter the message, and press the call key.
IM group settings
Select IM groups > Options > Group > Settings.
You can only edit IM group settings if you have editing rights to that group.
Select from the following settings:
• Group name: — Enter a name for the IM group.
• Group ID — The group ID is created automatically and cannot be added or changed.
• Group topic — Enter a topic for the group conversation.
• Welcome note — Enter a note that greets IM users once they join the group.
• Group size — Enter the maximum number of IM users that can join the group.
• Allow search — Select whether you want to allow IM users to find the group when searching.
• Editing rights — To provide other members of the group with editing rights to the group, select Selected > Options > Add
editor. IM users with editing rights can edit group settings and invite other users to join the group or ban them from it.
• Group members — To close the group and allow only selected IM users to join it, select Selected only > Options > Add
member.
• Banned list — To prevent some IM users from joining the group, select Options > Add to banned list.
• Allow private msgs. — To prevent group members from sending private messages between themselves, select No.
Group editing rights
To add editing rights to or remove them from IM group members, scroll to the IM group, and select Options > Group >
Tip: IM users with editing rights can edit group settings and invite other users to join the group or ban them from the
group.
To provide members with editing rights to the group, select Options > Add editor and from the following:
• From IM contacts — Add one or several of your IM contacts.
• Enter user ID — Enter the ID of the IM user.
To remove editing rights from a group member, select Options > Remove.
Ban from groups
Scroll to the IM group, and select Options > Group > Settings > Banned list.
To prevent IM users from joining the group, select Options > Add to banned list and from the following:
• From IM contacts — Ban one or several of your IM contacts.
• Enter user ID — Enter the ID of the IM user.
To allow a banned user to join the group, select Options > Remove.
IM contacts
When login to an IM service is complete, your contact list for the service provider is retrieved automatically. If your contact list
is not available, wait a few minutes and try to retrieve your contacts list manually.
Tip: The online status of your IM contacts is shown by an indicator next to the contact name.
To create an IM contact card, select Options > New IM contact. Enter the user ID and a nickname, and select Done. The user ID
can be up to 50 characters, and the IM service provider may require the user ID to be in the username@domain.com format.
The nickname is optional.
To view a different list of your IM contacts, select Options > Change contact list.
Scroll to an IM contact, select Options and from the following:
• Open conversation — Start or continue instant messaging with the contact.
• Contact details — View the contact card.
• Editing options — Edit or delete the contact card, move it to another contact list, or receive a note when the contact's online
status changes.
• Belongs to groups — See the IM groups the contact has joined.
• New contact list — Create a contact list for a specific group of IM contacts.
• Reload users' availab. — Update the online status of your IM contacts.
• Blocking options — Prevent or allow the reception of messages from the contact.
• Login — Connect to an instant messaging server if you did not log in when you opened the application.
• Logout — Disconnect from the IM server.
• Settings — Edit instant messaging application or server settings.
The available options may vary.
To delete an IM contact, press the backspace key.
Blocked contacts
Select IM contacts > Options > Blocking options > View blocked list.
To find a blocked IM user, enter the first letters of the user's name. Matching names appear in a list.
To allow receiving messages from a blocked IM user, select Options > Unblock.
To prevent receiving messages from other IM users, select Options > Block new contacts. Select the IM user from your IM contacts,
or enter the user ID.
View invitations
Select Conversations. Scroll to an invitation, and press the scroll key.
Select Options and from the following:
• Join — Join the instant messaging group.
• Reject — Reject the invitation and send a message to its sender.
• Delete — Delete the invitation.
• Blocking options — Prevent the reception of invitations from this sender.
Recorded messaging
To view a recorded conversation, select Record. chats, scroll to a conversation, and press the scroll key.
You can also scroll to a recorded conversation, and select Options and select from the following:
• Send — Send the IM session to a compatible device.
• Login — Connect to an instant messaging server if you did not log in when you opened the application. To disconnect, select
Logout.
• Settings — Edit instant messaging application or server settings.
To delete an IM conversation, press the backspace key.
Settings
Select Options > Settings > IM settings.
Select from the following settings:
• Use screen name — To change the name that identifies you in IM groups, select Yes.
• Allow messages from — Select to receive instant messages from all other IM users, your IM contacts only, or not to receive
messages at all.
• Allow invitations from — Select to receive invitations to IM groups from all IM users, your IM contacts only, or not to receive
invitations at all.
• Msg. scrolling speed — To decrease or increase the speed at which new messages are displayed, scroll left or right.
• Sort IM contacts — Select to list your IM contacts alphabetically or by their online status.
• Availabil. reloading — To update the online status of your IM contacts automatically, select Automatic.
• Offline contacts — Select if IM contacts with an offline status are shown in the IM contacts list.
The settings available for editing may vary. Contact your service provider for more information.
IM server settings
Select Options > Settings > Server settings.
Scroll to the following options, and press the scroll key to configure your IM server:
• Servers — Add new, edit, or delete servers.
• Default server — Change the server to which your device automatically logs into, scroll to the desired server, and press the
scroll key.
• IM login type — To establish a connection between your device and the default server automatically, select Automatic. Select
Auto. in home network to automate the connection when in your home network. Select On app. start-up to connect to the
server when you open the messaging application. Select Manual to connect to the server manually at any time.
Special messages
Your device can receive many kinds of messages that contain data:
• Operator logo — To save the logo, select Options > Save.
• Ringing tone — To save a ring tone, select Options > Save.
• Configuration message — You may receive settings from your network operator, service provider, or company information
management department in a configuration message. To accept the settings, open the message, and select Options > Save
all.
• E-mail notification — The note tells you how many new e-mails you have in your remote mailbox. An extended notification
may list more detailed information.
Send service commands
Send a service request message to your service provider and request activation for certain network services.
To send a service request to your service provider, select Options > Service command. Enter the service request as a text message,
and select Options > Send.
Cell broadcast (network service)
With the cell broadcast service, you can receive messages on various topics from your service provider, such as weather or traffic
conditions in a particular region. For available topics and relevant topic numbers, contact your service provider.
Cell broadcast messages cannot be received in UMTS networks.
Messages cannot be received when the device is in Remote SIM mode. A packet data (GPRS) connection may prevent cell broadcast
reception.
Select Menu > Messag. > Options > Cell broadcast.
To receive cell broadcast messages, you must turn on cell broadcast reception. Select Options > Settings > Reception > On.
To view messages that are related to a topic, scroll to the topic, and press the scroll key.
To receive messages related to a topic, scroll to the topic, and select Options > Subscribe.
Tip: You can set important topics as hot topics. Scroll to the topic, and select Options > Hotmark. While the device is
in the standby mode, you are notified when you receive a message related to a hot topic.
To cancel the reception of cell broadcast messages, select the language of received messages, and select whether to
automatically detect new cell broadcast topics, select Options > Settings.
To add, edit, or delete topics, select Options > Topic, and select Add manually, Add from index, Edit, Delete or Delete all.
To store a cell broadcast message in the device memory, select the message and Options > Save. You can store up to 50 messages
in the device memory.
To find the numbers and addresses the cell broadcast message may contain, select Options > Find and Phone number, E-mail
address, or Web address. You can then call and send messages, open browser pages, or create bookmarks and contact cards.
To delete a message, press the backspace key.
Message settings
Fill in all fields marked with Must be defined or with a red asterisk.
Your device may recognize the SIM card provider and automatically configure the correct text message, multimedia message,
and GPRS settings. If not, contact your service provider for the correct settings, order the settings from your service provider in
a configuration message, or use the Settings wizard application.
Text message settings
Select Options > Settings > Text message.
Define the following:
• Message centers — View the available message centers for your device.
• Msg. center in use — Select a message center to send the message.
• Character encoding — Select Reduced support to use automatic character conversion to another encoding system when
available.
• Receive report — Select Yes if you want the network to send you delivery reports on your messages (network service).
• Message validity — Select the length of time that the message center continues to resend your message if the first attempt
fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message
center.
• Message sent as — Convert the message to another format, such as Text, Fax, Paging or E-mail. Change this option only if you
are sure that your message center is able to convert text messages into these other formats. Contact your network operator.
• Preferred conn. — Select the preferred method of connection when sending text messages from your device.
• Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number
(network service).
Multimedia message settings
Select Options > Settings > Multimedia message.
Define the following settings:
• Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image
size of multimedia messages.
• MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that
may not be supported by the network or the receiving device. To receive warnings about including such content, select
Guided. To create a multimedia message with no restrictions on attachment type, select Free. If you select Restricted, creating
multimedia presentations is not possible.
• Access point in use — Select the default access point to connect to the multimedia message center. You may not be able to
change the default access point if it is preset in your device by your service provider.
• Multimedia retrieval — Select Always automatic to always receive multimedia messages automatically, Auto. in home
network to receive notification of a new multimedia message that you can retrieve from the message center (for example,
when you are traveling abroad and are outside your home network), Manual to retrieve multimedia messages from the
message center manually, or Off to prevent receipt of any multimedia messages.
• Allow anon. msgs. — Select whether you want to receive messages from unknown senders.
• Receive ads — Select whether you want to receive messages defined as advertisements.
• Receive report — Select Yes to have the status of the sent message to be shown in the log (network service). Receiving a
delivery report of a multimedia message that has been sent to an e-mail address may not be possible.
• Deny report sending — Select Yes to not send delivery reports from your device for received multimedia messages.
• Message validity — Select the length of time that the message center continues to resend your message if the first attempt
fails (network service). If the recipient of a message cannot be reached within the validity period, the message is removed
from the multimedia messaging center. Maximum time is the maximum amount of time allowed by the network.
Select Menu > Messag. > Options > Settings > E-mail.
If you have not defined a mailbox yet, select Mailbox in use, and press the scroll key. The mailbox guide opens and helps you
set up your e-mail account.
If you have defined a mailbox, select the mailbox, and press the scroll key to edit the settings.
The settings available for editing may vary. Some settings may be preset by your service provider.
Settings for the received e-mail
Select Incoming e-mail and from the following settings:
• User name — Enter the user name for the e-mail service.
• Password — Enter the password for the e-mail service.
• Incoming mail serv. — Enter the IP address or host name of the server that receives your e-mail.
• Access point in use — Select the Internet access point that the device uses for retrieving the e-mail messages that you receive.
• Mailbox name — Enter a name for the mailbox.
• Mailbox type — Select the mailbox protocol that your remote mailbox service provider recommends. The options are POP3
and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox
settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest
e-mail messages, you must disconnect and make a new connection to your mailbox.
• Security (ports) — Select the security option used to increase the security of the connection.
• Port — Define a port for connection.
• APOP secure login (for POP3 only) — Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail
server while connecting to the mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
• My e-mail address — Enter the e-mail address given to you by your service provider. Replies to your messages are sent to
this address.
• User name — Enter the user name for the e-mail service.
• Password — Enter the password for the e-mail service.
• Outgoing mail serv. — Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to
use the outgoing server of your network operator. Contact your service provider for more information.
• Access point in use — Select the Internet access point that the device uses for sending the e-mail messages that you send.
• Security (ports) — Select the security option used to secure the connection to the remote mailbox.
• Port — Define a port for connection.
User settings
Select User settings and from the following settings:
• My name — Enter a name to appear before your e-mail address when you send e-mail.
• Reply-to — Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address
to which you want to direct the replies. You can only enter one address.
• Delete e-mails from — Select whether you want to delete the e-mails only from the device or from both the device and the
server. Select Always ask if you want to confirm from where the e-mail should be deleted every time you delete an e-mail.
• Send message — Select to send the e-mail as soon as possible, to send it the next time you retrieve e-mail, or to store the e-
mail in the outbox, from where you can send it later.
• Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined
in My e-mail address in the settings for Outgoing e-mail.
• Include signature — Select whether you want to attach a signature to your e-mail messages.
• New e-mail alerts — Select whether you want to receive the new e-mail indications (a tone and a note) when new mail is
received to the mailbox.
• Flash on new e-mails — Select how long you want the notification light to blink when you receive a new e-mail, or whether
you want the notification light to blink at all.
Retrieval settings
Select Retrieval settings and from the following settings:
• E-mail to retrieve (for POP3 mailboxes only) — Select whether you want to retrieve only the e-mail header information such
as sender, subject and date, e-mail, or e-mail with attachments.
• Retrieval amount — Select the number of e-mails you want to retrieve from the remote server to your mailbox.
• IMAP4 folder path (for IMAP4 mailboxes only) — Define the folder path for folders to be subscribed.
• Folder subscriptions (for IMAP4 mailboxes only) — Subscribe to other folders in the remote mailbox and retrieve content
When the device is locked, calls may be possible to the official emergency number programmed into your device.
To make and receive calls (network service), the device must be switched on, the device must have a valid SIM card installed,
and you must be located in a service area of the cellular network. The GPRS connection is put on hold during voice calls unless
the network supports dual transfer mode or you have a USIM card and are within the coverage of a UMTS network.
Make a call
Important: If the device has been locked, enter the lock code to activate the phone function. When the device is locked,
calls may be possible to the official emergency number. Making an emergency call in the offline profile or when the
device is locked requires that the device recognize the number to be an official emergency number. It is advisable to
change the profile or unlock the device by entering the lock code before you make the emergency call.
Enter the phone number, including the area code, and press the call key. If you enter an incorrect character, press the backspace
key. To end the call or cancel the call attempt, press the end key.
To make a call using the saved contacts, press the contacts key. Enter the first letters of the name, scroll to the name, and press
the call key. See "Contacts," p. 43.
Press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and
press the call key to dial the number. See "Log," p. 41.
Use the volume keys to adjust the volume of an active call.
To call your voice mailbox (network service) in standby mode, press and hold 1, or press 1 then the call key.
1-touch dial
1-touch dialing allows you to make a call by pressing and holding a number key.
Before using 1-touch dialing, select Menu > Tools > Settings > Call > 1-touch dialing > On.
To assign a number key to a phone number, select Menu > Tools > 1-touch. Scroll to the number key (2 - 9) on the screen, and
select Options > Assign. Select the desired number from the Contacts directory.
To remove the phone number assigned to a number key, scroll to the 1-touch dialing key, and select Options > Remove.
To change a phone number assigned to a number key, scroll to the 1-touch dialing key, and select Options > Change.
Answer a call
To answer a call, press the call key.
To decline the call, press the end key.
To mute a ringing tone instead of answering a call, select Silence.
To answer a new call during a call when the Call waiting function is activated, press the call key. The first call is put on hold. To
end the active call, press the end key.
Options during a call
Select Options for the following options during a call:
• Mute — Your voice cannot be heard by the other parties of a call while you listen to the active conversation.
• Unmute — Your voice can be heard again by the other parties of the call.
• Drop participant — Drop a party from the active call.
• End active call — End the currently active call.
• Menu — View the applications menu of your device.
• Hold — Place the active call on hold.
• Unhold — Remove the active call from hold.
• New call — Place a new call while on a call, if conference calling (network service) is available.
• Answer — Answer an incoming call while on a call, if Call waiting is activated.
• Decline — Reject an incoming call while on a call, if Call waiting is activated.
• Lock keypad — Lock the device keypad while on a call.
• Conference — Merge an active and a held call into a conference call (network service).
• Private — Converse privately with a selected participant during a conference call (network service).
• Swap — Alternate between an active and a held call (network service).
• Send touch tones — Send touch tone strings, for example, passwords. Enter the string or search for it in Contacts, and select
• Transfer — Connect the held call to the active call and disconnect yourself from the call (network service).
The available options may vary.
Forward calls
Select Menu > Tools > Settings > Call forwarding.
Forward incoming calls to your voice mailbox or to another phone number. For details, contact your service provider.
1. Select a call type from the following:
• Voice calls — Incoming voice calls.
• Data and video calls — Incoming data and video calls. Video calls are available only if you have UMTS network coverage.
See "UMTS (3G)," p. 49.
• Fax calls — Incoming fax calls.
2. Select one of the following call forwarding options:
• All voice calls, All data and vid. calls, or All fax calls. — Forward all incoming voice, data and video, or fax calls.
• If busy — Forward incoming calls when you have an active call.
• If not answered — Forward incoming calls after your device rings for a specified period of time. Define the time you let
the device ring before forwarding the call in the Delay time: field.
• If out of reach — Forward calls when the device is switched off or out of network coverage.
• If not available — Activate the last three settings at the same time. This option forwards calls if your device is busy, not
answered, or out of reach.
3. Select Activate.
To check the current forwarding status, scroll to the forwarding option, and select Options > Check status.
To stop forwarding voice calls, scroll to the forwarding option, and select Options > Cancel.
Call restriction and call forwarding cannot be active at the same time.
Call restriction
When calls are restricted, calls may be possible to the official emergency number programmed into your device.
Select Menu > Tools > Settings > Call restriction.
You can restrict the calls that can be made or received with the device (network service). To change the settings, you need the
restriction password from your service provider. Call restriction affects all calls, including data calls. Call restriction and call
forwarding cannot be active at the same time.
To restrict calls, select Cellular call restriction, and select from the following options:
• Outgoing calls — Prevent making voice calls with your device.
• Incoming calls — Restrict incoming calls.
• International calls — Prevent calling to foreign countries or regions.
• Incoming if roaming — Restrict incoming calls when outside your home country.
• Intern. except home — Prevent calls to foreign countries or regions, but allow calls to your home country.
To check the status of voice call restriction, scroll to the restriction option, and select Options > Check status.
To stop all voice call restrictions, scroll to a restriction option, and select Options > Cancel all restrict..
Net call restriction
To restrict net calls, select Menu > Tools > Settings > Call restriction > Internet call restriction.
To reject net calls from anonymous callers, select Anonymous calls > On.
Send touch tones
You can send touch tones during an active call to control your voice mailbox or other automated phone services.
To send a touch tone sequence, make a call, and wait until the other end answers. Select Menu > Options > Send touch
tones. Type the touch tone sequence, or select a predefined sequence.
To attach touch tone sequences to contact cards, press the contacts key. Open a contact, and select Options > Edit > Options >
Add detail > Touch tones. Enter the tone sequence. Press * three times to insert p, a pause of about 2 seconds before or between
touch tones. Press Done. To set the device to send the touch tones only after you select Send touch tones during a call, press *
four times to insert w.
Video calls
To be able to make a video call, you must be within coverage of a UMTS network. See "UMTS (3G)," p. 49.
For availability of and subscription to video call services, contact your network operator or service provider. While talking, you
can send a real-time video to the recipient's compatible mobile phone and see a real-time video sent by the recipient, if the
recipient has a compatible mobile phone with a video camera. A video call can only be made between two parties.
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
To make a video call, enter the phone number or select the recipient of the call from Contacts, and select Options > Call >
Video call. You cannot convert the video call to a normal voice call.
To answer a video call, press the call key. If Allow video image to be sent to caller? is shown on the display, select Yes to send a
video to the caller or No to disable video sending.
Tip: In case you do not want to send a video during video calls, you can send a still image instead. Select the still image
to be sent in Menu > Tools > Settings > Call > Image in video call > Use selected.
During the call, select Options and from the following:
• Audio — Talk to the recipient of the call.
• Use video — See video without audio.
• Loudsp. — Select to use the loudspeaker for receiving audio.
• Handset — Mute the loudspeaker and use the handset.
Push to talk
Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not
appear on your device menu. Your device may also have been specially configured. This configuration may include changes in
menu names, menu order, and icons. Contact your service provider for more information.
Select Menu > Connect. > PTT.
Push to talk (PTT) (network service) provides direct voice communication connected with the push of a key. With push to talk,
you can use your device as you would use a walkie-talkie.
You can use push to talk to have a conversation with one person or with a group of people, or to join a channel. A channel is
like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other participants; the
participants just join the channel and start speaking with each other.
In push to talk communication, one person talks while the other participants listen through the built-in loudspeaker. Participants
take turns responding to each other. Because only one participant can talk at a time, the maximum duration of a speech turn
is limited. For details of the speech turn duration for your network, contact your network operator or service provider.
Remember to hold the device in front of you during a push to talk call so you can see the display. Speak towards the microphone,
and do not cover the loudspeaker with your hands.
Phone calls always take priority over push to talk.
Before you can use push to talk, you must define the push to talk access point and push to talk settings. You may receive the
settings in a special text message from the service provider that offers the push to talk service.
User settings
Select Options > Settings > User settings.
Define the following:
• Incoming PTT calls — Select Notify if you want to see a notification of incoming calls. Select Auto-accept if you want push to
talk calls to be answered automatically. Select Not allowed if you want push to talk calls to be rejected automatically.
• PTT call alert tone — Select Set by profile if you want the incoming call alert setting for push to talk to follow your profile
settings. If your profile is silent, you are not available to others using push to talk, except for callback requests.
• Callback request tone — Define the ringing tone for callback requests.
• Application start-up — Select if you want to log in to the push to talk service when you switch on your device.
• Default nickname — Enter your default nickname (20 characters maximum) that is displayed to other users.
• Show my PTT address — Define if you want callers to see your push to talk address. You can let all callers see the address,
show the address only to one-to-one callers or channel participants, or hide the address from all callers.
• Show my login status — Define whether your login to the push to talk server is shown or hidden from other users.
Connection settings
Select Options > Settings > Connection settings.
Define the following:
• Domain — Enter the domain name obtained from your service provider.
• Access point name — Select the push to talk access point.
• Server address — Enter the IP address or domain name of the push to talk server obtained from your service provider.
• User name — Enter your user name obtained from your service provider.
• Password — Enter a password, if required, to log into the push to talk service. The password is provided by the service provider.
If you have set Application start-up on in User settings, push to talk automatically logs in to the service when started. If not, you
must log in manually.
To log in to a push to talk service, select Options > Settings > Connection settings, and enter your User name, Password,
Domain, Server address, and Access point name. Select Options > Switch PTT on.
When the Ringing type setting of your device is set to Beep once or Silent, or there is an ongoing phone call, you cannot make
or receive push to talk calls.
Push to talk calls
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
Select Options > PTT contacts.
To make a push to talk call, select one or several contacts from the list, and press the voice key. Remember to hold the device
in front of you during a push to talk call so you can see the display. The display informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the entire time you
are talking. When you have finished talking, release the key.
To end the push to talk call, press the end key.
When you receive a push to talk call, press the call key to answer the call or the end key to dismiss the call.
Callback requests
To send a callback request, select Options > PTT contacts, scroll to the desired contact, and select Options > Send callback
request.
To answer a callback request, select Show to open the callback request. To make a push to talk call to the sender, press the voice
key.
Contacts view
To view, add, modify, delete, or call contacts, select Options > PTT contacts. A list of names from the Contacts of your device is
displayed with information about their login status.
To call a selected contact, select Options > Talk 1 to 1. To make a group call, select Options > Make PTT group call.
To send the contact a request to call you, select Options > Send callback request.
Create a channel
A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other
participants; the participants just join the channel and start speaking with each other.
To create a channel, select Options > New channel > Create new.
Select Options and define the following:
• Channel name — Write the channel name.
• Channel privacy — Select Private or Public.
• Nickname in channel — Enter your nickname (20 characters maximum) that is displayed to other users.
• Channel thumbnail — Insert a picture that describes the channel.
To delete a channel, press the backspace key.
When you log in to push to talk, push to talk automatically connects to the channels that were active when the application was
last closed.
Register PTT channels
To register a channel to the push to talk service, select Options > Register.
To edit the channel details, select Options > Edit.
Participant details
To view the currently active participants of a channel, select Options > Active members.
To view more information about a selected participant, select Options > Contact details.
To call a selected contact, select Options > Talk 1 to 1. To make a group call, select Options > Make PTT group call.
To send the contact a request to call you, select Options > Send callback request.
To add a contact to Contacts, select Options > Add to Contacts.
To join a channel, select Options > PTT channels. Select the channel you want to talk to, and press the voice key. Remember to
hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn
to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the
entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select Swap. The active channel is highlighted.
To view the currently active participants in the channel, select Options > Active members.
To invite a participant to a channel, select Options > Send invitation.
Push to talk log
To open the push to talk log, select Options > PTT log. The log shows the date, time, duration, and other details of your push
to talk calls.
Tip: To initiate a one-to-one call from PTT log, select the desired log event and press the voice key.
Exit push to talk
Select Options > Exit. Select Yes to log out and close the service. Press No if you want to keep the application active on the
background.
Net calls
With the net call service (network service), you can make and receive calls over the internet.
Your device supports voice calls over the internet (net calls). Your device attempts emergency calls primarily over cellular
networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your
net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if
possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make
calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the
availability of a WLAN network and your net call provider's implementation of emergency call capabilities. Contact your net call
provider to check the internet telephony emergency call capability.
VoIP (voice over internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the
internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a
traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
The availability of the net call service may vary according to your country or sales area.
Define the net call settings
Before you can make net calls, you need to define the net call settings. After you have defined the net call settings with these
instructions, your device logs in to the net call service automatically when you select Menu > Connect. > Internet tel..
First: define a SIP profile
1. Select Menu > Tools > Settings > Connection > SIP settings > Options > Add new, and enter the required information.
See "Edit SIP profiles," p. 82. You must define all available SIP settings, but ensure that Registration is set to Always on.
Contact your net call provider for the correct information.
2. Select Proxy server, and set Transport type to Auto.
3. Select Back until you return to the Connection menu.
Second: define a net call profile
1. Select Internet tel. settings > Options > New profile. Enter a name for the profile, and select the SIP profile you just created.
2. Select Back until you return to the main menu.
Third: select a preferred net call profile (optional)
If you select a preferred net call profile, Internet tel. automatically uses this network profile to connect to the net call service.
1. Select Menu > Connect. > Internet tel..
2. Select Preferred profile and the net call profile you just created.
3. Select Back until you return to the main menu.
Tip: You can also use manual login to the net call service. Use the same settings instructions as with automatic login,
but ensure that Registration is set to When needed and Transport type is set to UDP or TCP. With manual login, you
need to manually select the network used in the net call service.
To make or receive a net call, your device must be connected to a net call service. Select Menu > Connect. > Internet tel..
If you have selected automatic login, your device automatically connects to the net call service. If you manually login to the
service, choose an available connection network from the list, and select Select to connect to the net call service. The saved
networks, which are marked with a star icon, are shown first on the list. If you want to stop the connection from establishing,
select Cancel.
Select Options and from the following:
• Connect to service — to establish a connection to a service when there is a net call service and suitable connection network
available.
• Disconnect from serv. — to end the connection to the net call service.
• Change service — to choose the net call service for outgoing calls if the device is connected to more than one service. This
option is shown only if there is more than one configured service available.
• Configure service — to configure new services. This option is shown only if there are services that have not been configured.
• Save network — to save the network to which you are currently connected. The previously saved networks are marked with
a star icon on the list of connection networks. This option is shown only if you are connected to an unsaved wireless LAN
network.
• Use hidden network — to connect to a net call service using a hidden wireless LAN network.
• Refresh — to manually refresh the list of connection networks. Use this option, if your wireless LAN network is not shown on
the list. The list is also refreshed automatically every 15 seconds.
The available options may vary.
Your device can be connected only to one wireless LAN access point at a time. If you use two or more net call services, which
use the same access point, your device may be connected to multiple services at the same time. The service used for outgoing
net calls is shown in the view, where the connection networks are listed, and can be changed by selecting Change service.
After you have successfully connected to a service, you can save the used wireless LAN network as a known access point.
Connect using a shortcut
You may have a shortcut for Internet tel. in the active standby or you can add a shortcut if it is not available. See "Standby mode
settings," p. 80. By using the shortcut, you can register manually if a net call service and an access point are available. If you
are already connected to a net call service, the device asks if you want to disconnect from the service.
Make net calls
If you set Internet call as the preferred call type and your device is connected to a net call service, calls are made as net calls as
the default.
To set the preferred call type for outgoing calls, select Menu > Connect. > Internet tel. > Options > Settings > Preferred call
type > Cellular or Internet call.
You can make a net call from all applications where you can make a regular voice call.
To make a net call in the standby mode, enter the phone number or internet address, and press the call key.
To make a net call to an address that does not start with a digit, press any number key when the device is in the standby mode;
then press the function key to clear the display and to switch the device from number mode to letter mode. Write the address,
and press the call key.
You can also make a net call from Contacts and Log. To make a call from Contacts, select Menu > Contacts, and scroll to the
desired contact. Select Options > Call > Internet call.
To make a call from Log, select Menu > Log > Recent calls and Missed calls, Recvd. calls or Dialed nos., and scroll to the desired
contact. Select Options > Call > Internet call.
Service settings
Select Menu > Connect. > Internet tel. > Options > Settings > Settings:.
Select Login type to view or change the way Internet tel. connects to the net call service. Select from the following:
• Automatic — Login automatically to the net call service. When a known network is found, the device automatically connects
to the net call service. If you use the automatic login type for wireless LAN networks, the device periodically scans for wireless
LAN networks, which increases the demand on battery power and reduces the battery life.
• Manual — Login manually to the net call service.
Select Saved conn. networks to view the connection networks you have saved for the net call service or the connection networks,
which are recognized by the net call service. These networks are used for automatic login and are marked with a star icon on
the list of connection networks. To remove a connection network from the service, select Options > Remove.
Select Edit service settings to open the service-specific settings. This option is only available if a service-specific software plugin has been installed in the device.
Select Menu > Tools > Voice cm..
Use voice commands to make phone calls and to launch applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in the contacts list and for the functions designated in the Voice cm. application.
When a voice command is spoken, the device compares the spoken words to the voice tag in the device.
Voice commands are not dependent on a speaker’s voice; however, the voice recognition in the device adapts to the main user’s
voice to better recognize voice commands.
Make a call
The voice tag for a contact is the name or nickname that is saved on the contact card in Contacts. To listen to the voice tag, open
a contact card, and select Options > Play voice tag.
1. To make a call using a voice command, press and hold the voice key.
2. When you hear the tone or see the visual display, clearly speak the name saved on the contact card.
3. The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name
and number. After a timeout, the device dials the number. If the recognized contact was not correct, select Next to view a
list of other matches or Quit to cancel dialing.
If several numbers are saved under the contact, the device selects the default number, if it has been set. Otherwise, the device
selects the first available number of the following fields: Mobile, Mobile (home), Mobile (work), Telephone, Tel. (home), and Tel.
(work).
Launch an application
The device creates voice tags for the applications listed in the Voice cm. application.
To launch an application using a voice command, press and hold the voice key, and clearly speak the voice command. If the
recognized application was not correct, select Next to view a list of other matches or Quit to cancel.
To add more applications to the list, select Options > New application.
To change the voice command of an application, scroll to the application, and select Options > Change command. Type the
new voice command, and select OK.
Change profiles
The device creates a voice tag for each profile. To set on a profile using a voice command, press and hold the voice key, and say
the name of the profile.
To change the voice command, scroll to the desired profile, and select Profiles > Options > Change command.
Voice command settings
To switch off the synthesizer that plays recognized voice commands in the selected device language, select Options >
Settings > Synthesizer > Off.
To reset voice recognition learning when the main user of the device has changed, select Reset voice adapts..
Voice mailbox
Select Menu > Tools > Voice mail.
When you open the voice mailbox application for the first time, you are asked to enter the number of your voice mailbox. To
change the number, select Options > Change number. To call the number, select Options > Call voice mailbox.
Tip: To call your voice mailbox (network service) in standby mode, press and hold 1, or press 1 then the call key.
Log
Select Menu > Log.
In the Log, you can view information about the communication history of the device.
To receive correct log information, the device must be switched on, the device must have a valid SIM card installed, and you
must be located in a service area of the cellular network. The GPRS connection is put on hold during voice calls unless the network
supports dual transfer mode or you have a USIM card and are within the coverage of a UMTS network.
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,
rounding off for billing, taxes, and so forth.
To view the logs for recent voice calls, their approximate duration, and packed data connections, select Recent calls, Call
timers, or Packet data; and press the scroll key.
To sort the events by type or direction, scroll right to open the general log, and select Options > Filter. Scroll to a filter type,
and press the scroll key. Select the type or direction, and press the scroll key.
To set the time how long all communication events are held in the log, select Options > Settings > Log duration, an option,
and OK.
To clear missed and received calls and dialed numbers, select Recent calls > Options > Clear recent calls.
To reply to a caller with a message, select Recent calls > Missed calls > Options > Create message. You can send text messages
and multimedia messages.
To add the caller or the sender of a message to Contacts, select the caller or sender of a message, and select Options > Add to
Contacts.
To view the amount of data sent or received using GPRS, select Packet data.
To clear the GPRS counters, select Options > Clear counters. Enter your lock code, and select OK.
Log settings
To set the time for keeping all communication events in the Log, select Options > Settings > Log duration, an option from the
list, and OK.
To see the call duration during the call, select Options > Settings > Show call duration > Yes.
Press the contacts key.
Manage all of your contact information, such as phone numbers and addresses. Add a personal ringing tone, voice tag, or a
thumbnail image to a contact. Send contact information to compatible devices or receive contact information as business cards
from compatible devices, and add them to your own list of contacts.
To add a contact, select Options > New contact. Enter the contact information, and select Done.
To edit information in a contact card, scroll to the contact, and select Options > Edit > Options. Select from the following:
• Add thumbnail — Add a thumbnail image that will display when a contact calls you. The image must be previously saved to
your device or memory card.
• Remove thumbnail — Remove the image from the contact card.
• Add detail — Add fields of information to a contact card, such as Job title.
• Delete detail — Delete any details that you added to a contact card.
• Edit label — Edit the field names of the contact card.
Manage contact groups
Create a contact group so that you can send text or e-mail messages to several recipients at the same time.
1. Scroll to the right, and select Options > New group.
2. Enter a name for the group or use the default name, and select OK.
3. Open the group, and select Options > Add members.
4. Scroll to each contact you want to add to the group, and press the scroll key to mark it.
5. Select OK to add all marked contacts to the group.
The following options are available when you select Options in the contact groups view:
• PTT options — Make a push to talk call either to an individual or to a group, or send a callback request.
If push to talk is not available from your wireless service provider, it may not appear in the menu of your device.
• Open — Open the contact group and view the group members.
• Create message — Send a message.
• New group — Create a new contact group.
• Delete — Delete a contact group.
• Rename — Rename the contact group.
• Ringing tone — Assign a ringing tone to a contact group.
• Contacts info — View the information for a contact group.
• Settings — Set the name display settings for contact group members.
To remove a contact from a contact group, open the contact group. Scroll to the contact you want to remove, and select
Options > Remove from group > Yes.
Tip: To check the group in which a contact belongs, press the contacts key. Scroll to the contact, and select Options >
Belongs to groups.
To view or edit a contact within a contact group, open the contact group. Scroll to the contact you want to view or edit, and
select Options. Select from the following options: Open Opens the contact and displays contact information. Call Select Voice
call or Video call, and call the contact. This option is available only if you have UMTS network coverage. See "UMTS
(3G)," p. 49.Create message Create and send a text message or multimedia message to the contact. Remove from group
Remove the contact from the contact group. Belongs to groups View all contact groups that a contact belongs to.
Manage default information
Assign a default number or address to a contact so you can easily call or send a message to the default number or address, even
if several numbers or addresses are saved to that contact.
To change default information for a contact, open the contact, and select Options > Defaults. Select the number or address you
want to set as a default, and select Assign.
The default number or address is underlined in the contact.
Copy contacts between SIM and device memory
To copy contacts from a SIM card to device memory, select Options > SIM contacts > SIM directory to open the SIM directory.
Mark the contacts you want to copy, or select Mark all to copy all contacts. Select Options > Copy to Contacts.
To copy contacts from the device memory to a SIM card, select Options > Copy to SIM direct.. Mark the contacts you want to
copy, or select Mark all to copy all contacts. Select Options > Copy to SIM direct..
Select Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In SIM directory you can
add, edit, or copy numbers to Contacts, and you can make calls.
Select ringing tones for contacts
Select a ringing tone for a contact or contact group. If the caller's phone number is sent with the call and your device recognizes
the number, the ringing tone plays when the contact calls you.
To select a ringing tone for a contact or contact group, open the contact or contact group, and select Options > Ringing tone.
A list of ringing tones opens. Select the ringing tone you want to use.
To remove the ringing tone, select Default tone from the list of ringing tones.
Business cards
Press the contacts key.
You can send, receive, view, and save contact cards as business cards in vCard or Nokia Compact Business Card format.
You can send business cards to compatible devices using SMS, MMS, or e-mail, or an infrared or Bluetooth connection.
To send a business card, select the contact card from the contacts list, and select Options > Send. Select Via text message, Via
multimedia, Via e-mail, Via Bluetooth, or Via infrared. Enter the phone number or address, or add a recipient from the contacts
list. Select Options > Send. If you select SMS as the sending method, contact cards are sent without images.
To view a received business card, select Show from the displayed notification, or open the message from the inbox folder in
Messag..
To save a business card, select Options > Save business card when the incoming message appears on the device.
To save a received business card, select Options > Save business card.
To delete a received business card, select Options > Delete.
Select Menu > Office > Team suite.
With Nokia Team Suite, you can create, edit, and delete teams, and send messages, view teams' web pages and communication
history, and make phone calls to teams at one go.
To create a new team, select Options > Team > Create new. Give a name for the team and enter the conference call service
information, if needed. Then select the members for the team.
To select an action, select the team to which you want to apply the action, scroll right to the action bar, and select the desired
action. If you do not want to apply the action to all team members, open the team, and select the desired members by pressing
the scroll key. Then select the action.
To find more actions than shown on the action bar, select Options > Actions. The following actions are available:
• Call — Make a phone call to the team or selected team members. The team members are called one by one and put on hold
until the calls can be merged into a conference call (network service). The maximum number of participants depends on the
network service.
• Create message — Send a text message, a multimedia message, or an e-mail to the team or selected team members.
• Call conference service — Start a call to the conference call service (network service) defined for the selected team.
• Communication log — View the communication log for the team or selected team members.
• Team search — Search for content related to the team or team members.
• Push to talk — Communicate via push to talk (network service) with the team or selected team members.
If Push to talk is not available from your wireless service provider, it may not appear in the menu of your device.
• Team Web bookmarks — Open the bookmark folder that contains the team's web pages.
To select which actions are shown in the action bar and in which order, select Options > Settings > Action bar icons.
Edit teams
To add team members, select Options > Members > Add.
To remove team members, select Options > Members > Remove.
To edit the details of a member, select Options > Members > Edit.
To select whether to see the team members' pictures on the display, select Options > Settings > View contact image.
To see to which teams a member belongs, select Options > Members > Belongs to teams.
Select Menu > Calendar.
In Calendar, you can create and view scheduled events and appointments. You can also set alarms for calendar entries.
You can synchronize your calendar data with a compatible computer using Nokia PC Suite. For information on synchronization,
see the PC Suite guide.
Create calendar entries
You can create four types of calendar entries:
• Meeting entries have a specific date and time.
• Memo entries are related to the whole day but not to a specific time of the day. Memo entries do not appear in the weekly
time schedule view.
• Anniversary entries remind you of birthdays and special dates. They refer to a certain day but not a specific time of the day.
Anniversary entries are repeated every year.
• To-do entries remind you of a task that has a due date but not a specific time of the day.
To create a calendar entry, scroll to a date, and select Options > New entry. Select an entry type. Available settings for meeting,
memo, anniversary, and to-do entries vary.
Select from the following:
• Subject or Occasion — Enter a description for the entry.
• Location — Enter any necessary location information.
• Start time — Enter the start time.
• End time — Enter the end time.
• Start date or Date — Enter the start date or date the event occurs.
• End date — Enter the end date.
• Alarm — Set an alarm for meeting and anniversary entries. The alarm is displayed in the Day view.
• Repeat — Specify whether you want the entry to be repeated and when. Define the repeat type, frequency, and possible
ending date.
• Synchronization — If you select Private, the calendar entry can be seen only by you and is not shown to others with online
access to view the calendar. If you select Public, the calendar entry is shown to others who have access to view your calendar
online. If you select None, the calendar entry is not copied to your PC when you synchronize.
Tip: Make sure you have selected the correct city in the Clock application, because scheduled calendar entries may
change when the current city is changed and is on another time zone.
To open and edit an existing entry, scroll to the entry, and select Options > Open. Edit the details in the various fields.
Tip: When you edit or delete a repeated entry, choose how you want the change to take effect. If you select All calendar
entries deleted, all repeated entries are deleted. If you select Delete entry, only the current entry is deleted.
To-do
You can create and maintain a task or list of tasks that must be done by a certain day. Each task can be assigned a due date, and
an alarm.
To open the list of to-do notes, select Options > To-do view.
To add a to-do note, select Options > New entry > To-do. Start to write the task in the Subject field. You can set a due date for
the task, create an alarm for it, and specify a priority. The priority icons are ( ! ) High and ( - ) Low. There is no icon for Normal.
To mark a task as completed, scroll to the task in the to-do list, and select Options > Mark as done.
To restore a task, scroll to it in the todo list, and select Options > Mark as not done.
Calendar settings
Select Options > Settings to modify the Calendar alarm tone, Default view, Week starts on, and Week view title.
Calendar views
To switch between the different calendar views, select Options in any calendar view. Select a type of view from the list.
Tip: When viewing Calendar in any view, press the function key and * to quickly switch to another view.
To set the default calendar view, select Options > Settings > Default view > Month view , Week view, Day view, or To-do
view.
To view a specific date in the calendar view, select Options > Go to date. Enter the date, and select OK.
In the Month view, you can view the entire month at one time. Each row shows one week of dates. The active month is displayed,
and the active day is either today or the last day that was viewed. The active day is marked with a colored square. Days that
have scheduled events are marked with a small triangle in the bottom right corner. Scroll to switch between the days of the
month and day entries.
Tip: When viewing Calendar in any view, press the function key and * to quickly switch to another view.
The Week view shows the events for the selected week in seven day boxes. Today's date is marked with a colored square. Memos
and anniversaries are placed before 8:00 a.m.
To change the starting day of the week, select Options > Settings > Week starts on.
The Day view view shows the events for the selected day. Entries are grouped into time slots according to their starting time.
To view the previous or next day, scroll left or right.
The To-do view view shows the to-do items for the selected day.
Send calendar entries
To send a calendar entry to a compatible device, scroll to the entry, and select Options > Send > Via text message, Via
multimedia, Via e-mail, Via Bluetooth, or Via infrared.
Add a received calendar entry to your calendar
You can receive a calendar entry as an attachment to a multimedia or e-mail message.
To add a received calendar entry to your calendar, open the calendar entry attachment in the message, and select Options >
Save to Calendar. The entry is added to your default calendar.
Tip: To update date and time automatically (network service), select Options > Settings > Network operator time >
Auto-update.
To change the clock type, select Options > Settings > Clock type > Analog or Digital.
Date and time settings
To change the date and time, their display formats, alarm tone, and to define whether you want to use automatic time update,
select Options > Settings and from the following:
• Time — Enter the time, and select OK.
• Time zone — Enter the time zone, and select OK.
• Date — Enter the date, and select OK.
• Date format — Change how the date is displayed. Scroll to the desired format, and select OK.
• Date separator — Change the symbol that separates days, months, and years. Scroll to the symbol you want, and select OK.
• Time format — Select 24-hour or am/pm.
• Time separator — Select the symbol that separates hours and minutes.
• Clock type — Select Analog or Digital.
• Clock alarm tone — Select the tone that you want to use for the alarm clock.
• Network operator time — Update time, date, and time zone information automatically (network service). Select Auto-
update to activate. This service may not be available in all networks.
Alarm clock
If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone.
If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to
make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.
To set an alarm, select Options > Set alarm. Enter the alarm time, and select OK.
To view and change alarms, select Options > Reset alarm.
To remove an alarm, select Options > Remove alarm.
Add and delete cities
To add a city, scroll right, and select Options > Add city. Scroll to a city, and select Options > Select.
Tip: To search for a city in the Cities list, select Options > Add city > Options > Find. Enter the city name in the search
field.
To delete a city, scroll right, scroll to the city, and select Options > Remove.
Changing the city in which you are located may change the general system time of your device.
Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not
appear on your device menu. Your device may also have been specially configured. This configuration may include changes in
menu names, menu order, and icons. Contact your service provider for more information.
Your device offers several options (network services) to connect to the Internet, a corporate intranet, or to another device or
PC. Wireless methods include wireless LAN, Bluetooth, and infrared. Your device supports a wired solution with a USB (Universal
Serial Bus) cable connection for Nokia PC Suite. Your device also allows you to communicate using net calls (Voice over IP), instant
messaging (chat), and modem-based connections. If it is available within your network, you may also communicate using the
push to talk feature.
Packet data (GPRS)
GPRS (general packet radio service) enables wireless access for mobile phones to data networks (network service). GPRS uses
packet data technology where information is sent in short bursts of data over the mobile network. The benefit of sending data
in packets is that the network is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows
for quick data connection set-up and fast data transmission speeds.
You must subscribe to the GPRS service. For availability and subscription to GPRS, contact your network operator or service
provider.
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables faster connection. For more information on the availability of EGPRS
and data transfer speed, contact your network operator or service provider. Note that when you have selected GPRS as a data
bearer, the device uses EGPRS instead of GPRS if this is available in the network.
During a voice call, you cannot establish a GPRS connection, and any existing GPRS connection is put on hold unless the network
supports dual transfer mode.
UMTS (3G)
Universal Mobile Telecommunications System (UMTS) is a third-generation (3G) mobile communication system. Besides voice
and data, UMTS enables audio and video delivery to wireless devices.
Your device can automatically switch between the GSM and UMTS networks. Contact your service provider for more information
about network type.
To select which network to use, select Menu > Tools > Settings > Network and the network in Network mode. If you want
the device to switch between the networks automatically, select Dual mode.
The GSM network is indicated with
When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access
points can share a data connection. In the UMTS network, data connections remain active during voice calls. You can, for example,
browse the Web faster than previously possible while simultaneously speaking on the phone.
, the UMTS network with .
Cable connection
Install the USB data cable driver to your PC before you use a cable connection. You can use the Data transfer without installing
the USB data cable drivers.
Select Menu > Connect. > Data cbl..
Using a USB data cable, you can connect your device to a compatible PC . Connect the USB data cable to the bottom of the device.
To change the device type you normally connect to your device with the data cable, press the scroll key.
Select from the following:
• Ask on connection — Select whether you want to be asked for the device type every time you connect the data cable to your
device.
• PC Suite — Connect the PC Suite to your device with the data cable, and use your device as a modem.
• Data transfer — Access and transfer data such as music or image files from your computer using the data cable connection.
To use the Data transfer mode, make sure that you have not selected USB as a connection type in the Manage connections
settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB
data cable, and select Data transfer when the device asks which mode is used. In this mode, your device acts as a mass storage
device and you can see it as a removable hard drive in your computer. The device will switch into the Offline profile if this is
selected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card. After you end the connection, the device returns to the profile in which it was before using the
data transfer mode.
This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Generic Access Profile, Serial Port
Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, SIM Access Profile, and Basic Imaging Profile.. To ensure interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
Bluetooth technology enables wireless connections between electronic devices within a range of 10 meters (33 feet). A Bluetooth
connection can be used to send images, videos, texts, business cards, calendar notes, or to connect wirelessly to devices using
Bluetooth technology, such as computers.
Since devices using Bluetooth technology communicate using radio waves, your device and the other devices do not need to
be in direct line-of-sight. The two devices only need to be within a maximum of 10 meters of each other, although the connection
can be subject to interference from obstructions such as walls or from other electronic devices.
Start using Bluetooth connectivity
There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase
the demand on battery power and reduce the battery life.
Select Menu > Connect. > Bluetooth.
To activate Bluetooth, press the function key and the Ctrl key simultaneously. To deactivate, press the function key and the Ctrl
key again. If you use this shortcut to activate Bluetooth, you will not be asked to name your device.
1. When you activate Bluetooth for the first time, you are asked to give a name to your device. Give your device a unique name
to make it easy to recognize if there are several Bluetooth devices in the vicinity.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all.
Your device and the name you entered can now be seen by other users with devices using Bluetooth technology.
Settings
Define the following settings:
• Bluetooth — Select On to be able to connect to another compatible device using Bluetooth connectivity.
• My phone's visibility — Select Shown to all to allow other devices using Bluetooth technology to find your device when you
have set Bluetooth > On. To prevent other devices from finding your device, select Hidden. Even if you select Hidden, paired
devices can still detect your device.
• My phone's name — Enter a name for your device. The name is visible to other devices that search for devices using Bluetooth
technology. The maximum length of the name is 30 characters.
• Remote SIM mode — Select On to enable another device, such as a compatible car kit enhancement, to use the SIM card in
your device to connect to the network.
If Bluetooth was turned off as a result of entering the Offline profile, you must re-enable Bluetooth manually.
See "SIM access profile," p. 51.
Security tips
When you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
Send data
Several Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files
to another compatible device at the same time.
1. Open the application where the item you want to send is stored.
2. Select the item, and select Options > Send > Via Bluetooth. The device searches for other devices using Bluetooth technology
within range and lists them.
Tip: If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for
more Bluetooth devices, select More devices.
3. Select the device with which you want to connect, and press the scroll key to set up the connection. If the other device
requires pairing before data can be transmitted, you are asked to enter a passcode.
4. When the connection has been established, Sending data is shown.
The Sent folder in Messag. does not store messages sent using Bluetooth connectivity.
If you have sent items using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth
devices, select More devices.
To use a Bluetooth audio enhancement such as Bluetooth handsfree or headset you need to pair your device with the
enhancement. See the enhancement user guide for the passcode and further instructions. To connect to the audio enhancement,
press the power key to turn on the enhancement. Some audio enhancements connect automatically to your device. Otherwise
open Paired devices, scroll to the enhancement, and select Options > Connect.
Bluetooth connectivity indicators
Bluetooth is active.
When the icon is blinking, your device is trying to connect to the other device. When the icon is shown continuously, the
Bluetooth connection is active.
Pair devices
Select Menu > Connect. > Bluetooth, and scroll right to open the Paired devices page.
Before pairing, create your own passcode (1-16 digits), and agree with the user of the other device to use the same code. Devices
that do not have a user interface have a fixed passcode. You need the passcode only when you connect the devices for the first
time. After pairing, it is possible to authorize the connection. See "Authorize a device," p. 51. Pairing and authorizing the
connection makes connecting quicker and easier, as you do not have to accept a connection between paired devices every time
you establish the connection.
The passcode for remote SIM access must have 16 digits.
1. Select Options > New paired device. The device starts to search for Bluetooth devices within range.
Tip: If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for
more Bluetooth devices, select More devices.
2. Select the device with which you want to pair, and enter the passcode. The same passcode must be entered to the other
device as well.
3. Select Yes to make the connection between your device and the other device automatic or No to confirm the connection
manually every time a connection attempt is made. After pairing, the device is saved to the paired devices page.
To give a nickname to a paired device that is only displayed in your device, scroll to the device with which you have paired, and
select Options > Assign short name.
To delete a pairing, select the device whose pairing you want to delete and Options > Delete. To delete all pairings, select
Options > Delete all.
Tip: If you are currently connected to a device and cancel the pairing with that device, pairing is removed immediately,
and the connection is switched off.
Authorize a device
If you trust a paired device, you can allow it to connect automatically to your device. You can select from the following options:
• Set as authorized — Connections between your device and the other device can be made without your knowledge. No separate
acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices
that belong to someone you trust.
• Set as unauthorized — Connection requests from the other device must be accepted separately every time.
Receive data
If you want to receive data using Bluetooth, select Bluetooth > On and My phone's visibility > Shown to all. When you receive
data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, the
message is placed in the Inbox folder in Messag.
Tip: You can access the files in the device or on the memory card using a compatible accessory that supports the File
Transfer Profile Client service (for example, a laptop computer).
End a Bluetooth connection
A Bluetooth connection is disconnected automatically after sending or receiving data. Only Nokia PC Suite and some
enhancements such as headsets may maintain a connection even if not actively used.
SIM access profile
When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit,
to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your
device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been
locked, enter the lock code to unlock it first.
With the SIM access profile, you can access the SIM card of your device from a compatible car kit device. This way, you do not
need a separate SIM card to access SIM card data and connect to the GSM network.
To use the SIM access profile, you need the following:
• Compatible car kit device that supports Bluetooth wireless technology
• Valid SIM card in your device
For more information about car kit devices and compatibility with your device, see www.nokia.com and your car kit user guide.
Manage the SIM access profile
1. Select Menu > Connect. > Bluetooth to activate Bluetooth connectivity in your device.
2. To enable remote SIM access, scroll to Remote SIM mode, and press the scroll key.
3. Activate Bluetooth in the car kit device.
4. Use your car kit device to start a search for compatible devices. For instructions, see the user guide of your car kit device.
5. Select your device from the list of compatible devices.
6. To pair the devices, enter the Bluetooth passcode shown on the display of the car kit device to your device.
7. Authorize the car kit device. Select Menu > Connect. > Bluetooth, and scroll to the Paired devices page. Scroll to the car kit
device, and enter the Bluetooth passcode. When the device asks to make the connection automatic, select Yes. Connections
between your device and the car kit device can be made without separate acceptance or authorization. If you select No,
connection requests from this device must be accepted separately every time.
Tip: If you have already accessed the SIM card from the car kit with the active user profile, the car kit searches
automatically for a device with the SIM card. If it finds your device, and automatic authorization is activated, the car
device automatically connects to the GSM network when you switch on the car ignition.
When you activate the remote SIM access profile, you can use applications on your device that do not need network or SIM
services.
To end the remote SIM access connection from your device, select Menu > Connect. > Bluetooth > Remote SIM mode > Off.
Infrared
Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser
product.
Use infrared to connect two devices and transfer data between them. With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible device.
Send and receive data
1. Ensure that the infrared ports of the devices face each other. The positioning of the devices is more important than angle or
distance.
2. Select Menu > Connect. > Infrared, and press the scroll key to turn on infrared on your device. Turn on infrared on the other
device.
Tip: You can also turn on infrared by pressing the function key and the Chr key simultaneously.
3. Wait a few seconds until an infrared connection is established.
4. To send, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.
If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be
started again.
All items received through infrared are placed in the Inbox folder in Messag..
Positioning devices away from each other breaks a connection, but the infrared light beam remains active on your device until
it is deactivated.
Modem
Select Menu > Connect. > Modem.
Together with a compatible computer, you can use your device as a modem to connect to the Web.
Before you can use your device as a modem
• You must subscribe to the appropriate network services from your service provider or Internet service provider.
• You need a compatible computer with infrared connectivity.
• You must have Nokia PC Suite installed on your computer.
• You must have the appropriate drivers installed on your computer. You may need to install or update infrared drivers. After
you have installed Nokia PC Suite, follow the instructions on the computer display to install the drivers and connect your
device to the computer.
After you have installed Nokia PC Suite and the appropriate drivers, start Nokia PC Suite on your computer. Select Connect to the
Internet, and follow the instructions on the computer display.
To connect the device to a compatible computer using infrared, press the scroll key. Make sure the infrared ports of the device
and computer are directly facing each other with no obstacles between them.
You may not be able to use some of the other communication features when the device is used as a modem.
Email data roaming
Select Menu > Tools > Settings > Connection > Access point groups.
Your device allows roaming between wireless access technologies, such as WLAN and GPRS, for e-mail. For example, you can
start an e-mail session at home and continue the session on your way to work. While your session continues uninterrupted,
your handheld device switches from WLAN to GPRS and back to WLAN when you arrive at your workplace.
Access point groups
To create an access point group, select Access point groups > Options > New group. In the Group name field, enter a name
for the group. Define in the Conn. switching field whether to show the connection switching process on the display of your
device. Choose and edit the access points that belong to this group in the Access points section.
To add an access point to the selected access point group, select Access points > Options > Add access point, and select the
access point to add.
To edit an access point in an access point group, select the access point and Options > Edit.
To remove an access point in an access point group, select the access point and Options > Remove.
To set the order in which access points are used for email data roaming, select an access point group and Change. Scroll to an
access point, and select Options > Raise priority or Lower priority.
To change the SMTP settings of an access point, select the access point group from the list, and press the scroll key. Scroll to
Access points and press the scroll key. Select the desired access point from the access point list, select Options > SMTP
settings, and select from the following:
• Override SMTP serv. — Override the current SMTP server settings.
• SMTP server — Edit the server name or the server IP address.
• Secure connection — Select whether to use secure connection.
• Use authentication — Select whether to use authentication.
• User name — Edit your user name for the SMTP server.
• Password — Edit your password for the SMTP server.
Configure access point groups for mail and synchronization
To set an access point group for mail, select Menu > Messaging > Mailbox > Options > E-mail settings > Connection
settings > Incoming e-mail > Access point in use > Select group, and select the desired access point group.
To set an access point group for synchronization, select Menu > Connect. > Sync > Profile > Options > Edit sync profile >
Connection settings > Access point > Select group, and select the desired access point group.
Internet access points
An access point is where your device connects to a network. To use e-mail and multimedia services or to connect to the Internet
and browse web pages, you must first define Internet access points for these services. You may need to set up several Internet
access points, depending on the sites you want to access. For example, browsing the Web may require one access point, and
accessing your company intranet may require another. To connect to the Internet over GPRS, your device may have predefined,
default Internet access point settings.
When you switch on your device for the first time, the access points may be configured automatically based on the service
provider information in your SIM card. You can also receive the access points settings in a message from your service provider.
This might reduce the number of settings you need to enter yourself.
The available options may vary. Some or all access points may be preset for your device by your service provider. You may not
be able to add, edit, or delete access points.
Contact your service provider and e-mail service provider for more information on access points and their settings.
2. Select Options > New access point. To use an existing access point as a basis for the new one, select Use existing settings.
To start with an empty access point, select Use default settings.
3. Define the following settings.
• Connection name — Enter a descriptive name for the connection.
• Data bearer — Select Data call or High speed data (GSM only).
• Dial-up number — Enter the modem telephone number of the access point. Use + before international numbers.
• User name — Enter your user name if required by the service provider. User names are often case-sensitive and provided
by your service provider.
• Prompt password — Select Yes to enter your password each time you log into a server or No to save the password in your
device memory and automate the login.
• Password — Enter your password if required by the service provider. The password is often case-sensitive provided by
the service provider.
• Authentication — Select Secure to always send your password encrypted or Normal to send your password encrypted
when possible.
• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.
• Data call type — Select Analog or ISDN.
• Max. data speed — Select the limit to apply to the transfer speed. If you select Automatic, the data transfer rate is
determined by the network and may be affected by network traffic. Some service providers may charge more for higher
data rates.
4. After defining the basic settings, select Options > Advanced settings to define the advanced settings or Back to save the
settings and exit.
Advanced Internet access point settings for data calls
After setting up a basic Internet access point for Data call or High speed data (GSM only), select Options > Advanced settings,
and define the following advanced settings.
• IPv4 settings — Enter the device IP and name server addresses for IPv4 Internet protocol.
• IPv6 settings — Enter the device IP and name server addresses for IPv6 Internet protocol.
• Proxy serv. address — Enter the proxy server address.
• Proxy port number — Enter the proxy server port number. Proxy servers are intermediate servers between a browsing service
and its users, which are used by some service providers. These servers may provide additional security and speed up access
to the service.
• Use callback — Select Yes if you have a service that dials back to your device when you establish an Internet connection.
• Callback type — Select Use server no. or Use other no., according to instructions from your service provider.
• Callback number — Enter your data call phone number of your device, which the callback server uses.
• Use PPP compress. — Select Yes to speed up the data transfer, if it is supported by the remote PPP server.
• Use login script — Select Yes, if your Internet service provider requires a login script, or if you want to automate your login.
A login script is a sequence of instructions that the system follows during the login process.
• Login script — Enter the login script. This setting is available only if you have selected Use login script > Yes.
• Modem initialization — Enter a command string for the connection setup, if required by your service provider.
Set up an Internet access point for packet data (GPRS)
When you switch the device on, it may recognize the SIM card provider and configure the correct text message, multimedia
message, and GPRS settings and access points automatically.
• Authentication — Select Secure to always send your password encrypted or Normal to send your password encrypted
when possible.
• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.
4. After defining the settings, select Options > Advanced settings to define the advanced settings or Back to save the settings
and exit.
Advanced Internet access point settings for packet data (GPRS)
After setting up a basic Internet access point for packet data (GPRS), select Options > Advanced settings, and define the following
advanced settings.
• Network type — Select IPv4 or IPv6 as the Internet protocol type. The Internet protocol defines how data is transferred to
and from your device.
• Phone IP address — Enter the IP address of your device. Select Automatic to have the network provide the device IP address.
This setting is shown only if you select Network type > IPv4.
• DNS address — Enter the IP addresses of the Primary DNS address and Secondary DNS addr. if required by your service provider
or network operator. Otherwise, the name server addresses are provided automatically.
• Proxy serv. address — Enter the address of the proxy server. Proxy servers are intermediate servers between a browsing
service and its users, which are used by some service providers. These servers may provide additional security and speed up
access to the service.
Set up an Internet access point for wireless LAN
You can use the WLAN wizard to create Internet access points for wireless LAN, or define the access point manually. See "Wireless
local area network (WLAN)," p. 56.
Connection manager
Select Menu > Connect. > Conn. mgr..
To view the status of data connections or end connections, select Act. data conn..
To search for wireless LANs available within range, select Availab. WLAN.
View and end active connections
Note: The actual invoice for calls and services from your service provider may vary, depending on network features,
rounding off for billing, taxes, and so forth.
In the active connections view, you can see the open data connections: data calls, packet data connections, and wireless LAN
connections.
To view detailed information about network connections, select the connection from the list and Options > Details. The type
of information shown depends on the connection type.
To end a network connection, select the connection from the list and Options > Disconnect.
To end all active network connections simultaneously, select Options > Disconnect all.
To view the details of a network, press the scroll key.
Search for wireless LAN
To search for wireless LANs available within range, select Menu > Connect. > Conn. mgr. > Availab. WLAN. A list of found
networks is displayed.
The available wireless LAN view shows a list of wireless LANs within range, their network mode (infrastructure or ad-hoc), signal
strength indicator and network encryption indicators, and if your device has an active connection with the network.
To view the details of a network, press the scroll key.
To create an Internet access point in a network, select Options > Define access point.
Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.
This device can detect and connect to a wireless local area network (WLAN). To use wireless LAN, a network must be available
in the location and your device must be connected to it.
See wireless LAN availability
Your device can show you whether wireless LAN is available.
To have your device show wireless LAN availability, select Menu > Tools > Settings > Connection > Wireless LAN > Show
availability.
If wireless LAN is available,
Tip: You can also scan for networks in range.
Wireless LAN connections
Important: Always enable one of the available encryption methods to increase the security of your wireless LAN
connection. Using encryption reduces the risk of unauthorized access to your data.
To use wireless LAN, you must create an internet access point (IAP) in a wireless LAN. Use the access point for applications that
need to connect to the internet. A wireless LAN connection is established when you create a data connection using a wireless
LAN Internet access point. The active wireless LAN connection is ended when you end the data connection. You can also end the
connection manually. See "Connection manager," p. 55.
You can use wireless LAN during a voice call or when packet data is active. You can only be connected to one wireless LAN access
point device at a time, but several applications can use the same internet access point.
When the device is in the Offline profile, you can still use wireless LAN (if available). Remember to comply with any applicable
safety requirements when establishing and using a wireless LAN connection.
If you move the device to another location within the wireless LAN and out of range of a wireless LAN access point, the roaming
functionality can automatically connect your device to another access point that belongs to the same network. As long as you
remain within range of access points that belong to the same network, your device can stay connected to the network.
Tip: To check the unique media access control (MAC) address that identifies your device, for example to configure the
MAC address of your device to a WLAN router, enter *#62209526# on the device keypad. The MAC address is shown on
the device display.
is shown on the display.
Operating modes
Your device enables different types of communication in a wireless LAN. The two operating modes are infrastructure and ad
hoc.
• The infrastructure operating mode allows two kinds of communication: wireless devices communicate with each other
through a wireless LAN access point or wireless devices communicate with a wired LAN device through a wireless LAN access
point. The advantage of the infrastructure operating mode is that you can have more control over network connections
because they pass through an access point. A wireless device can access the services that are available in a regular wired LAN:
company database, e-mail, the Internet, and other network resources, for example.
• In the ad hoc operating mode you can send data to and receive it from other devices with compatible wireless LAN support ,
for example, to be printed. These functions may require an additional third party application to work. No wireless LAN access
point is required. Simply make the necessary configurations and start communicating. Ad hoc networking is easy to set up,
but communication is limited to devices that are within range and support compatible wireless LAN technology.
WLAN wizard
The WLAN wizard helps you to connect to a wireless LAN.
The WLAN wizard shows the status of your wireless LAN connections and network searches in the active standby mode. To view
the available options, scroll to the row showing the status, and press the scroll key. Depending on the status, you can start the
web browser using a wireless LAN connection, disconnect from a wireless LAN, search for wireless LANs, or set network scanning
on or off.
If wireless LAN scanning is off and you are not connected to any wireless LAN, WLAN scanning off is displayed in the active
standby mode. To set scanning on and search for available wireless LANs, scroll to the status, and press the scroll key.
To start a search for available wireless LANs, scroll to a status, press the scroll key, and select Search for WLAN. To set wireless
LAN scanning off, scroll to a status, press the scroll key, and select Switch WLAN scan off.
W i r e l e s s l o c a l a r e a n e t w o r k ( W L A N )
When Start Web browsing is selected, the WLAN wizard automatically creates an internet access point (IAP) for the selected
wireless LAN. The IAP can also be used with other applications requiring wireless LAN connection.
If you select a secured wireless LAN network, you are asked to enter the relevant passcodes. To connect to a hidden network,
you must enter the correct hidden service set identifier (SSID).
You can also start the WLAN wizard separately to get more information on wireless LANs within range. Select Menu >
Connect. > WLAN wiz.. Found networks are displayed.
Scroll to the desired network, select Options and from the following:
• Start Web browsing or Cont. Web browsing — Start or continue browsing the web using the IAP of the wireless LAN.
• Disconnect WLAN — Disconnect the active connection to the wireless LAN.
• Refresh — Update the list of available wireless LANs.
• Details — View the details of the wireless LAN.
• Define access point — Create an internet access point without starting the web browser.
Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption
reduces the risk of unauthorized access to your data.
Wireless LAN access points
To search for wireless LANs available within range, select Menu > Connect. > WLAN wiz.. To create an internet access point in
a wireless LAN, select Options > Define access point. To view the details of a network shown in the list, select Options >
Details.
When an application asks you to select an access point, select the created access point. You can also create an internet access
point by selecting Search for WLAN, or use Conn. mgr. to create internet access points.
See "Connection manager," p. 55.
Set up a wireless LAN access point manually
If you cannot use the WLAN wizard, you can define wireless LAN access points manually.
2. Select Options > New access point. To use an existing access point as a basis for the new one, select Use existing settings.
To start with an empty access point, select Use default settings.
3. Define the following settings.
• Connection name — Enter a descriptive name for the connection.
• Data bearer — Select Wireless LAN.
• WLAN netw. name — To enter the service set identifier (SSID), that is, the name that identifies the specific wireless LAN,
select Enter manually. To select the network from the wireless LANs in range, select Search for netw..
• Network status — Select Hidden if the network you are connecting to is hidden, or Public if it is not hidden.
• WLAN netw. mode — If you select Infrastructure, devices can communicate with each other and with wired LAN devices
through a wireless LAN access point. If you select Ad-hoc, devices can send and receive data directly with each other, and
no wireless LAN access point is needed.
• WLAN security mode — You must select the same security mode that is used in the wireless LAN access point. If you select
WEP (wired equivalent privacy), 802.1x, or WPA2 (Wi-Fi protected access), you must also configure the relevant additional
settings.
• WLAN security sett. — Edit the security settings for the selected WLAN security mode.
• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.
The settings available for editing may vary.
Advanced Internet access point settings for wireless LAN
Select Menu > Tools > Settings > Connection > Access points.
After setting up a basic Internet access point for wireless LAN, select Options > Advanced settings, and define the following
advanced settings.
• IPv4 settings — Enter the device IP and name server addresses for the IPv4 Internet protocol.
• IPv6 settings — Select or enter the name server addresses for the IPv6 Internet protocol.
• Ad-hoc channel — If the selected network mode is ad-hoc, select User defined to manually enter a channel number (1-11).
• Proxy serv. address — Enter the proxy server address.
• Proxy port number — Enter the proxy server port number.
The settings available for editing may vary. Contact your service provider for more information.
Web is one of the two browsers in your device. With Web, you can browse regular Web sites. These pages use the extensible
hypertext markup language (XHTML) or hypertext markup language (HTML). If you want to browse WAP pages, use Menu >
Media > Services. Both of the browsers use their own bookmarks. The links in your received messages open in the Services
browser.
Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also
give you instructions on how to use their services.
Access points
To browse the Web, you need to configure Internet access point settings. If you are using a data call or a GPRS connection, your
wireless network must support data calls or GPRS, and the data service must be activated for your SIM card. Your device might
have configured the Internet access point settings automatically based on your SIM card. If not, contact your service provider
for the correct settings.
Tip: You may receive the Internet access point settings from your service provider as a special text message or from
the network operator's or service provider's Web pages.
You can also enter the Internet access point settings manually. See "Internet access points," p. 53.
Browse the Web
To browse the Web, select a bookmark, and press the scroll key. You can also enter the Web address, and press the scroll key.
Use only services that you trust and that offer adequate security and protection against harmful software.
Tip: When you start to enter the address, addresses of pages you have previously visited that match your input are
displayed. To open a page, scroll to the address, and press the scroll key.
To open a Web link, scroll to it and press the scroll key. On a Web page, new links appear underlined in blue and previously
visited links in purple. Images that act as links have a blue border around them.
Addresses of the pages you visit are saved in the Auto. bookmarks folder.
Keyboard shortcuts:
• Press 1 to open your Bookmarks.
• press 2 to find text.
• Press 3 to return to the previous page.
• Press 5 to switch between your open browser windows.
• Press 8 to open page overview.
• Press 9 to go to a different Web page.
Bookmarks
Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites
through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If
you choose to access such sites, you should take precautions for security or content.
To view a bookmarked Web page, scroll to the bookmark, and press the scroll key.
To browse other Web pages, select Options > Navigation options > Go to web address, enter the page address, and select Go
to.
To delete a bookmark, scroll to it, and press the backspace key.
To add a bookmark, select Menu > Web > Options > Bookmark manager > Add bookmark. Scroll to Name to enter a descriptive
name for the bookmark, Address to enter the Web page address, Access point to change the access point to connect to the Web
page, and User name or Password to enter your user name and password, if required by the service provider. To save the
bookmark, select Back.
Download items
You can download different items such as ringing tones, images, operator logos, themes, and video clips. To download an item,
scroll to it, and press the scroll key. These items can be provided free, or you can purchase them. Downloaded items are handled
by the respective applications in your device.
When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed.
To view the list, you can also select Options > Tools > Downloads. In the list, scroll to an item, and select Options to pause,
resume, or cancel ongoing downloads; or open, save, or delete completed downloads.
To purchase items:
1. To download the item, scroll to the link, and press the scroll key.
2. Select the appropriate option to purchase the item.
3. Carefully read all the information provided. To continue the download, select Accept. To cancel the download, select
Cancel.
End a connection
To end the connection and view the browser page offline, select Options > Advanced options > Disconnect; or to end the
connection and close the browser, select Options > Exit.
Clear the cache
A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential
information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in
the cache.
To clear the cache, select Options > Advanced options > Clear cache.
News feeds and blogs
Select Menu > Web > Web feeds.
Feeds are xml files in various Web pages that usually contain headlines and articles, often about recent news or other topics.
You can subscribe to interesting feeds on Web pages. Select Options > Subscribe.
Tip: Blog is a shortening of Weblog, which is a continuously updated Web diary . Often the author's personality is an
important factor in the blog.
To download a feed or blog, scroll to it, and press the scroll key.
To add a feed or blog, select Options > Manage feed > New feed, and enter the information.
To edit a feed or blog, scroll to a feed, select Options > Manage feed > Edit, and modify the information.
Web settings
Select Menu > Web > Options > Settings.
Define the following settings:
• Access point — Scroll to the access point to connect to Web pages, and press the scroll key.
• Load imgs. & sounds — Select No to load pages faster when browsing by not loading the images on them.
• Default encoding — Select the correct character encoding for your language.
• Auto. bookmarks — Select On to save Web page addresses that you visit automatically in the Auto. bookmarks folder. To hide
the folder, select Hide folder.
• Screen size — Select Full screen to use the whole display area for viewing Web pages. You can press the left selection key to
open Options and use the available options while browsing in full screen mode.
• Homepage — Select the page that you want to appear as your homepage. Select Default to use the access point homepage,
User defined to enter the homepage address, or Use current page to use the currently open Web page.
• Mini map — Select whether you want to see an overview of the page as a miniature on top of the page you are viewing.
• History list — Select whether you want to see miniatures of the pages you have visited when you want to go back in your
browsing history.
• Cookies — Select to allow or reject the sending and receiving of cookies. Cookies are info the network server collects about
your visits to various Web pages. They are necessary if you shop on the Web (for example, to retain the items you buy until
you reach the cashier page). However, the information may be misused (for example, you may receive unwanted
advertisements in your device).
• Java/ECMA script — Some Web pages may include program commands that affect the appearance of the page or interaction
between the page and its browsers. To deny the use of such scripts, select Disabled (for example, if you have trouble
downloading).
• Security warnings — Select Show or Hide to see or hide the security warnings you may receive during browsing.
• Block pop-ups — Select whether you want to allow pop-ups. Some pop-ups may be necessary (for example, smaller windows
where you write e-mails in Web-based mail systems), but they may also contain unwanted advertising.
Services is one of the two browsers in your device. With Services, you can browse WAP pages that have been designed specially
for mobile devices. For example, operators may have WAP pages for mobile devices. To browse regular Web pages, use the other
browser in Menu > Web.
Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also
give you instructions on how to use their services.
Tip: To start a connection, press and hold 0 in the standby mode.
Office folder contains tools that help you organize and manage the details of different events in your personal and business life.
Some applications in the Office folder are not available in all languages.
Opening a large file may not be possible or it may take a while.
File manager
With File mgr., you can manage the contents and properties of files and folders. You can open, create, move, copy, rename, and
search for files and folders. Copyright protection may prevent sending some files.
Manage files
To open a file, scroll to it, and press the scroll key.
Tip: To select multiple files, scroll to each file, and simultaneously press the shift key and scroll key to mark it. After you
have marked all desired files, select Options and the desired command.
To send a file, scroll to the file, and select Options > Send.
To delete a file, scroll to the file, and select Options > Delete.
To organize files or folders, scroll to the file or folder, and select Options > Move to folder. Default folders such as sound clips
in gallery cannot be moved or deleted.
Tip: To copy the file or folder to another folder, select Options > Copy to folder. To create a new folder to organize
your files, select Options > New folder.
To rename a file or folder, scroll to the desired file or folder, and select Options > Rename. Enter the new name, and select
OK.
To receive a file using an infrared connection, select Options > Receive via infrared.
To view information about files, scroll to the desired file, and select Options > View details.
To check the memory consumption in device memory or a memory card, select Options > Memory details.
Search for files
1. To search for files, select Options > Find.
2. Select the memory you want to search.
3. Enter the search text, and press the scroll key. The folders and files whose names contain the search text are displayed.
4. Select Options > Find to conduct another search.
Quickoffice
To use the Quickoffice applications, select Menu > Office > Quickoffice. A list of files in the .doc, .xsl, .ppt, and .txt file formats
saved in your device memory or the memory card opens.
To open a file in its respective application, press the scroll key.
To edit a file, open the file, and press the scroll key.
To sort files, select Options > Sort by.
To open Quickword, Quicksheet, or Quickpoint, scroll to the desired tab with the scroll key.
Not all file formats or features are supported.
For more information, see the device help.
Quickword
With Quickword, you can view and edit Microsoft Word documents on the display of your device. Quickword supports colors,
bold, and underline.
Quickword supports the viewing and editing of documents saved in .doc format in Microsoft Word 97, 2000, and XP. Not all
variations or features of the mentioned file formats are supported.
To move in the document, use the scroll key.
To search the document for text, select Options > Search options.
You can also select Options and from the following:
• Go to — Move to the start, end, or selected position within the document.
• Zoom — Zoom in or out.
• Start auto-scroll — Start automatic scrolling through the document. To stop scrolling, select Options > Stop auto-scroll.
To edit the document, press the scroll key. Select Edit, and from the available options. You can, for example, align text, change
the font and font color, and add bullets and indentations.
Quicksheet
With Quicksheet, you can read and edit Microsoft Excel files on the display of your device.
Quicksheet supports the viewing and editing of spreadsheet files saved in .xls format in Microsoft Excel 97, 2000, and XP. Not
all variations or features of the mentioned file formats are supported.
To move around in the spreadsheet, use the scroll key.
To switch between worksheets, select Options > Worksheet.
To search the spreadsheet for a text, value, or formula, select Options > Search.
To change how the spreadsheet is displayed, select Options and from the following:
• Pan — Navigate within the current worksheet by blocks. A block contains columns and rows displayed by a screen. To display
the columns and rows, scroll to a block and select OK.
• Resize — Adjust the size of columns or rows.
• Zoom — Zoom in or out
• Freeze panes — Keep the selected row, column, or both visible while you move in the spreadsheet.
To edit the spreadsheet, press the scroll key. Select Edit, and from the available options. You can, for example, format text and
cells, insert mathematical operators and spreadsheet functions, and change the background color.
Quickpoint
With Quickpoint, you can view and edit Microsoft PowerPoint presentations on the display of your device.
Quickpoint supports the viewing and editing of presentations created in .ppt format in Microsoft PowerPoint 2000 and XP. Not
all variations or features of the mentioned file formats are supported.
To move between the slide, outline, and the notes view, scroll to the desired tab with the scroll key.
To move to the next or previous slide in the presentation, scroll up or down with the scroll key.
To view the presentation in full screen, select Options > Full screen.
To expand items in the presentation in the outline view, select Options > Expand.
To edit the presentation, press the scroll key. Select Edit, and from the available options. You can, for example, align text, change
the font and font color, and add bullets and indentations.
Print
You can print a message or file from the device, preview a print job, define page layout options, select a printer, or print to a
file. You may not be able to print all messages, such as multimedia messages or other special messages.
To configure a printer for your device, select Menu > Office > Printers > Options > Add. To set the printer as the default
printer, select Options > Set as default.
Before you print, make sure that your device is properly connected to the printer.
To print a message or a file, select Options > Print.
To print to a file, select Options > Printing options > Print to file, and determine the location for the file.
To change the printing options, select Options > Printing options. You can select the printer you want to use, the number of
copies and the range of pages you want to print.
To change the page layout before printing, select Options > Printing options > Page setup. You can change the paper size and
orientation, define the margins, and insert a header or a footer. The maximum length of the header and footer is 128 characters.
To preview a file or message before you print, select Options > Printing options > Preview.
Notes
Select Menu > Office > Notes.
You can create and send notes to other compatible devices, and save plain text files (.txt format) that you receive to Notes.
To write a new note, select Options > New note, write the text and press Done.
In the Notes main view, the following options are available:
• Send — To send the selected note, select one of the sending methods.
• New note — Create a new note.
• Delete — Delete the selected note.
• Mark/Unmark — Select a note or multiple notes, and apply the same rule to each.
• Synchronization — Select Start to initialize synchronization or Settings to define the synchronization settings for the note.
When viewing a note, select Options > Find to search the note for a phone number, Internet telephone address, e-mail or Web
address.
Calculator
Note: This calculator has limited accuracy and is designed for simple calculations.
Select Menu > Office > Calculator.
To make a calculation, enter the first number of the calculation. Scroll to and select a function such as add or subtract from the
function map. Enter the second number of the calculation, and select =. Use the keyboard to enter decimal points.
The calculator performs operations in the order they are entered. The result of the calculation remains in the editor field and
can be used as the first number of a new calculation.
To save the results of a calculation, select Options > Memory > Save. The saved result replaces the previously stored number
in memory.
To retrieve the results of a calculation from memory and use them in a calculation, select Options > Memory > Recall.
To view the last saved result, select Options > Last result.
Exiting the calculator application or turning off the device does not clear the memory. You can recall the last saved result the
next time you open the calculator application.
Converter
Select Menu > Office > Converter.
The converter has limited accuracy, and rounding errors may occur.
Convert measurements
1. Scroll to the Type field, and select Options > Conversion type to open a list of measures. Scroll to the measure you want to
use, and select OK.
2. Scroll to the first Unit field, and select Options > Change currency. Select the unit from which you want to convert, and select
OK. Scroll to the next Unit field, and select the unit to which you want to convert.
3. Scroll to the first Amount field, and enter the value you want to convert. The other Amount field changes automatically to
show the converted value.
Set base currency and exchange rate
Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates
are cleared.
Before you can make currency conversions, you must choose a base currency and add exchange rates. The rate of the base
currency is always 1. The base currency determines the conversion rates of the other currencies.
1. To set the rate of exchange for the unit of currency, scroll to the Type field, and select Options > Currency rates.
2. A list of currencies opens, and you can see the current base currency at the top. Scroll to the currency type and enter the
exchange rate you would like to set per single unit of currency.
3. To change the base currency, scroll to the currency, and select Options > Set as base curr..
4. Select Done > Yes to save the changes.
After you have inserted all the necessary exchange rates, you can make currency conversions.
Screen export
You can show the screen of the device to an audience with a compatible data projector, or other compatible projection system.
The screen content is transferred to the data projector using, for example, a Bluetooth connection.
Select Menu > Office > Screen export.
To be able to show screen content with a compatible data projector, you must install the drivers of the data projector. For more
information, check with the data projector manufacturer or its representative.
Not all applications support this feature. You can start the external viewer in two ways: from the Office folder or inside an
application that supports it.
Show screen content
To show screen content with a data projector, open the screen export application, and select Options > Select device. In the
list of available devices, scroll to the device you want to use, and select OK. Select Options > Enable to show screen content.
To hide the screen content, select Options > Hide. The screen exporter application is moved to the background.
To stop showing screen content, select Options > Disable.
Important: Only install and use applications and other software from trusted sources, such as applications that are
Symbian Signed or have passed the Java Verified™ testing.
Select Menu > Installat. > App. mgr..
When you open the application manager, you see all the software packages that have been installed, with their name, version
number, type, and size. You can view the details of installed applications, remove them from your device, and specify installation
settings.
Install applications and software
You can install two types of applications and software on your device:
• Applications and software specifically intended for your device or compatible with the Symbian operating system. These
software installation files have the extension .sis.
• J2ME™ applications compatible with the Symbian operating system. The Java application installation file extensions are .jad
or .jar.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you
in a multimedia message, as an e-mail attachment, or with Bluetooth. If you use Nokia PC Suite to transfer a file to your device,
save the file in the C:\nokia\installs folder in your device.
During installation, the device checks the integrity of the package to be installed. The device shows information about the checks
being carried out, and you are given options to continue or cancel the installation.
If you install applications that require a network connection, note that the power consumption of your device may increase
when you use these applications.
View and remove software
You can view the details of installed applications or remove them from your device.
To view the details of an installed software package, select the application and Options > View details.
To remove software, open the application manager main view and select Options > Remove.
If you remove software, you can only reinstall it by using the original software package file, or by restoring a full backup that
contains the removed software package. If you remove a software package, you may no longer be able to open files created
with that software. If another software package depends on the software package that you removed, the other software package
may stop working. Refer to the documentation of the installed software package for details.
View the installation log
To view the installation log, select Options > View log. A list shows what software has been installed and removed, and the
date of installation or removal. If you encounter problems with the device after installing a software package, you can use this
list to find out which software package may be the cause of the problem. The information in this list may also help to pinpoint
problems that are caused by software packages that are incompatible with each other.
Settings
To modify installation settings, select Options > Settings and from the following:
• Software installation — Select to install signed applications only or all applications.
• Online certif. check — To check the validity of certificates when an application is installed, select On.
• Default web address — The validity of a certificate is checked from the default address if the certificate does not include its
own Web address.
Specify Java application security settings
To specify security settings for a Java application, select Options > Suite settings.
You can define which functions the Java application can access. The value that you can set for each functionality depends on
the protection domain of the software package.
• Network access — Create a data connection to the network.
• Messaging — Send messages.
• App. auto-start — Open the application automatically.
• Connectivity — Activate a local data connection, such as a Bluetooth connectivity.
• Multimedia — Take pictures or record videos or sound.
• Read user data — Read your calendar entries, contacts, or any other personal data
• Edit user data — Add personal data, such as entries to your address book.
You can define how you will be prompted to confirm Java application access to device functions. Select one of the following
values:
• Ask every time — Require the Java application to ask for your confirmation each time it uses the functionality.
• Ask first time — Require the Java application to ask for initial confirmation to use the functionality.
• Always allowed — Allow the Java application to use the functionality without your confirmation.
• Not allowed — Prevent the Java application from using the functionality.
The security settings help protect your device against harmful Java applications that may use the functions of your device without
your permission. Only select Always allowed if you know the supplier and trustworthiness of the application.
Remote configuration network service
Select Menu > Connect. > Dev. mgr..
You can connect to a server and receive configuration settings for your device. You may receive server profiles and different
configuration settings from your network operator, service providers, and company information management department.
Configuration settings may include connection and other settings used by different applications in your device. Available options
may vary.
The remote configuration connection is usually started by the server when the device settings need to be updated.
Remote configuration settings
In the Dev. mgr. main view, select Options and select from the following:
• Start configuration — Connect to the server and receive configuration settings for your device.
• New server profile — Create a new server profile.
• Edit profile — Change the profile settings.
• Delete — Remove the selected profile.
• Enable config. — Select to receive configuration settings from those servers for which you have a server profile and have
allowed configuration.
• Disable config. — Select to stop receiving configuration settings from all servers for which you have a server profile.
• View log — View the configuration log of the selected profile.
Create a configuration profile
To create a new configuration server profile, select Options > New server profile and select from the following settings. Ask
your service provider for the correct values.
• Server name — Enter a name for the configuration server.
• Server ID — Enter the unique ID to identify the configuration server.
• Server password — Enter a password to identify your device to the server.
• Session mode — Select the preferred connection type.
• Access point — Select the access point to use for the connection, or create a new access point. You can also choose to be
asked for the access point every time you start a connection.
• Host address — Enter the Web address of the configuration server.
• Port — Enter the port number of the server.
• User name — Enter your user ID for the configuration server.
• Password — Enter your password for the configuration server.
• Allow configuration — Select Yes to allow the server to initiate a configuration session.
• Auto-accept all reqs. — Select Yes if you do not want the server to ask for your confirmation when it initiates a configuration
session.
• Network authentic. — To authenticate your device to the network before synchronizations, select Yes. Key in your Network
user name and Network password.
Data synchronization
Menu > Connect. > Sync.
Use Sync to synchronize (network service) your contacts, calendar, or notes with corresponding applications on a compatible
computer or remote Internet server. Your synchronization settings are saved in a synchronization profile. The application uses
SyncML technology for remote synchronization. For information on SyncML compatibility, contact the supplier of the applications
with which you want to synchronize your device.
The available applications you can synchronize may vary. Contact your service provider for more information.
Tip: You may receive the synchronization settings as a message from your service provider.
Create a synchronization profile
To create a profile, select Options > New sync profile and select from the following options:
• Sync profile name — Enter a name for the profile.
• Applications — Select the applications to synchronize with the profile.
• Connection settings — Specify the needed connection settings. Contact your service provider for information.
To edit an existing profile, select Options > Edit sync profile.
Synchronization profiles
In the Sync main view, select Options and select from the following options:
• Synchronize — Synchronize the data included in the selected profile with a remote database.
• New sync profile — Create a synchronization profile. You may want to create multiple synchronization profiles for an
application to vary the data bearer in use or remote database with which you synchronize your device.
• View log — View the added, updated, and deleted entries in the latest synchronization with the profile.
• Delete — Remove the selected profile.
Synchronization connection settings
To create the connection settings of a new profile, select Options > New sync profile > Connection settings and select from
the following options:
• Server version — Select the SyncML version you can use with your server.
• Server ID — Enter the server ID of your server. This setting is only available if you select 1.2 as the SyncML version.
• Data bearer — Select the data bearer to connect to the remote database during synchronization.
• Access point — Select the access point to use for the synchronization connection, or create a new access point. You can also
choose to be asked for the access point every time you start synchronizing.
• Host address — Enter the Web address of the server that contains the database with which you want to synchronize your
device.
• Port — Enter the port number of the remote database server.
• User name — Enter your user name to identify your device to the server.
• Password — Enter your password to identify your device to the server.
• Allow sync requests — To allow synchronization to start from the remote database server, select Yes.
• Accept all sync reqs. — To have your device ask for your confirmation before accepting synchronization from the server, select
No.
• Network authentic. — To authenticate your device to the network before synchronization, select Yes. Enter your network
user name and network password.
Define synchronization settings for Contacts
To define the synchronization settings for the Contacts application, scroll to the desired profile, and select Options > Edit sync
profile > Applications > Contacts and select from the following options:
• Include in sync — Select whether to synchronize your contacts directory with this synchronization profile.
• Remote database — Enter the path to the database with which you synchronize your contacts directory.
• Local database — If you have more than one contacts directory in your device, select the one you want to synchronize with
this synchronization profile.
• Synchronization type — Select the direction of synchronization. Scroll to Normal to synchronize data from the device to
remote database and back, To phone only to synchronize data from the remote database to your device, or To server only to
synchronize data from your device to the remote database.
Define synchronization settings for Calendar
To define the synchronization settings for the Calendar application, scroll to the desired profile, and select Options > Edit sync
profile > Applications > Calendar and select from the following options:
• Include in sync — Select whether to synchronize your calendar with this synchronization profile.
• Remote database — Enter the path to the database with which you synchronize your calendar.
• Local database — If you have more than one calendar in your device, select the one you want to synchronize with this
synchronization profile.
• Synchronization type — Select the direction of synchronization. Scroll to Normal to synchronize data from the device to
remote database and back, To phone only to synchronize data from the remote database to your device, or To server only to
synchronize data from your device to the remote database.
To define the synchronization settings for the Notes application, scroll to the desired profile, and select Options > Edit sync
profile > Applications > Notes and select from the following options:
• Include in sync — Select whether to synchronize your notes with this synchronization profile.
• Remote database — Enter the path to the database with which you synchronize your notes.
• Local database — If you have more than one Notes application in your device, select the one you want to synchronize with
this synchronization profile.
• Synchronization type — Select the direction of synchronization. Scroll to Normal to synchronize data from the device to
remote database and back, To phone only to synchronize data from the remote database to your device, or To server only to
synchronize data from your device to the remote database.
Download!
Select Menu > Download!.
Download! (network service) is a mobile content shop available on your device. You can browse, download, and install items,
such as latest applications and related documents, to your device from the web.
The items are categorized under catalogs and folders provided by Nokia or independent service providers. Some items may be
chargeable, but you can usually preview them free of charge.
Only install and use applications and other software from sources that offer adequate security and protection against harmful
software.
If Download! is not available from your wireless service provider, it may not appear in the menu of your device. For more
information on the availability of Download!, contact your network operator, service provider, or dealer.
Select catalogs, folders, and items
Download! uses your network services to access the most updated content. For information on additional items available
through Download!, contact your network operator, service provider, or the supplier or manufacturer of the item.
To open an item or view the content of a folder or a catalog, scroll to it, and press the scroll key.
Select Options, and from the following:
• Refresh list — Update the content in Download!.
• Hide — Hide a folder or a catalog from the list, for example, to view only items that you use frequently.
• Show all — Make all the hidden items visible.
• Buy — Buy the selected item. A submenu opens, where you can select the version of the item, and view price information.
• Get — Download an item that is free of charge.
• View details — View the details of the selected item.
• Settings — Adjust the Download! settings.
• Homepage — Return to the Download! main level.
The available options may vary depending on your service provider, the selected item, and the view you are in.
Download! settings
To select which access point is used to connect to the service provider’s server, and whether to have the device to ask for the
access point every time you use Download!, select Access point.
To define whether you want the downloaded item or application to open automatically after download is completed, select
Automatic open.
To define whether you want the preview confirmation query to be shown before previewing an item, select Preview
confirmation.
To define whether you want the purchase confirmation query to be shown before buying an item, select Buy confirmation.
Settings Wizard
Select Menu > Tools > Sett. wizard.
Settings Wizard configures your device for operator (MMS, GPRS, and Internet) and e-mail settings based on your network
operator information.
To use these services, you may have to contact your network operator or service provider to activate a data connection or other
services.
If Settings Wizard is not available from your wireless service provider, it may not appear in the menu of your device. For more
information on the availability of Settings Wizard, contact your network operator, service provider, or dealer.
The availability of different settings items in Settings Wizard depends on the features of the device, SIM card, wireless service
provider, and the availability of the data in the Settings Wizard database.