Nokia E51-1, E51-2 User Manual

E51 User Guide

Issue 2

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this RM-244 / RM-426 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, Eseries, E51, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names

mentioned herein may be trademarks or tradenames of their respective owners.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) f or personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

Nokia operates a policy of ongoing development. Nokia reserves th e right to make changes and improvements to any of the products described in this document without prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "A S IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY K IND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMP LIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

The availability of particular products and applications for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.

Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. T his device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.

Model number: E51-1 (RM-244) or E51-2 (RM-426)

Issue 2

For your safety ...............................................10

About your device...............................................................11

Network services................................................................11

Enhancements, batteries, and chargers...........................12

Get started......................................................13

Insert the SIM card and battery.........................................13

Charge the battery..............................................................14

Keys and parts.....................................................................15

Connect the headset...........................................................16

Attach the wrist strap.........................................................16

First start-up........................................................................16

Lock the keys.......................................................................17

Display indicators...............................................................17

Nokia support and contact information...........................19

Your Nokia E51...............................................20

Welcome..............................................................................20

Settings wizard...................................................................20

Standby modes...................................................................21

Active standby..................................................................21

Standby.............................................................................21

Menu....................................................................................21

Common actions in several applications..........................22

Transfer................................................................................23

Transfer content between devices.................................23

View transfer log..............................................................23

Synchronise, retrieve, and send data............................24

Personalisation...................................................................24

Profiles..............................................................................24

Select ringing tones.........................................................24

Customise profiles...........................................................25

Change the display theme..............................................25

Download a theme..........................................................25

3-D ringing tones.............................................................26

Volume control....................................................................26

One-touch keys...................................................................26

Home key..........................................................................26

Contacts key......................................................................27

Calendar key.....................................................................27

E-mail key.........................................................................27

Multitasking.........................................................................27

Memory................................................................................27

Free memory....................................................................27

Memory card.....................................................................28

MicroSD...........................................................................28

Insert the memory card................................................28

Use a memory card.......................................................28

Eject the memory card..................................................29

Write text.............................................................................29

Traditional text input......................................................29

Predictive text input........................................................30

Change the writing language.........................................30

Antennas..............................................................................30

Further information...........................................................31

Business communications..............................32

Telephone............................................................................32

Voice calls.........................................................................32

Answer a call..................................................................32

Make a call.....................................................................32

Make a conference call..................................................33

Fax calls..........................................................................33

Video calls.........................................................................33

Make a video call...........................................................33

Share a video.................................................................34

Receive a video sharing invitation..............................34

Net calls.............................................................................34

Create a net call profile.................................................35

Connect to the net call service.....................................35

Make net calls................................................................35

Net call service settings................................................36

Speed dialling...................................................................36

Call divert..........................................................................36

Call barring.......................................................................37

Bar net calls......................................................................37

Send DTMF tones..............................................................37

Voice mail.........................................................................38

Voice aid..............................................................................38

Voice commands.................................................................38

Make a call........................................................................39

Launch an application.....................................................39

Change profiles................................................................39

Voice command settings.................................................39

Log........................................................................................39

Call and data registers.....................................................40

Monitor all communications...........................................40

Call and send messages from Log..................................40

Log settings......................................................................40

Contacts...............................................................................40

Copy contacts between SIM and device memory.........41

Manage contacts..............................................................41

Manage contact groups...................................................42

Add ringing tones for contacts.......................................42

Send business cards.........................................................42

Manage received business cards....................................42

SIM directory.....................................................................42

Calendar...............................................................................43

Create calendar entries...................................................43

Create a meeting entry....................................................44

To-do entries....................................................................44

Calendar views.................................................................45

Work in different views................................................45

Month view....................................................................45

Week view.....................................................................45

Day view.........................................................................45

To-do view.....................................................................45

Calendar settings.............................................................46

Web......................................................................................46

Connection security.........................................................46

Browse the web...............................................................46

Bookmarks........................................................................47

Clear the cache.................................................................47

Feeds and blogs...............................................................47

End a connection..............................................................47

Web settings.....................................................................47

Messaging.......................................................48

Messaging folders...............................................................48

Organise messages.............................................................49

Message reader...................................................................49

Speech..................................................................................49

Edit the voice properties ................................................49

E-mail messages.................................................................49

Set up your e-mail with the mailbox guide..................50

Connect to a remote mailbox.........................................50

Read and reply to e-mail.................................................51

Write and send e-mail.....................................................51

Delete messages..............................................................52

Subfolders in your remote e-mail..................................52

Text messages.....................................................................52

Write and send text messages.......................................52

Sending options for text messages................................53

Text messages on the SIM card......................................53

View picture messages....................................................53

Forward picture messages..............................................53

Multimedia messages.........................................................54

Create and send multimedia messages.........................54

Receive and reply to multimedia messages..................55

Create presentations.......................................................55

View presentations..........................................................56

View and save multimedia attachments.......................56

Forward a multimedia message.....................................56

Send a sound clip.............................................................56

Sending options for multimedia messages..................57

Special message types.......................................................57

Service messages.............................................................57

Send service commands..................................................57

Cell broadcast......................................................................57

Messaging settings.............................................................58

Text message settings.....................................................58

Multimedia message settings.........................................58

E-mail account settings...................................................59

Connection settings......................................................59

User settings..................................................................59

Retrieval settings..........................................................60

Automatic retrieval settings........................................60

Service message settings................................................60

Cell broadcast settings....................................................61

Other settings...................................................................61

Nokia Office Tools...........................................62

Active notes.........................................................................62

Create and edit notes......................................................62

Settings for Active notes.................................................62

Search..................................................................................63

Search for information ...................................................63

Search results...................................................................63

Calculator.............................................................................63

File manager.......................................................................63

Quickoffice...........................................................................64

Work with files.................................................................64

Nokia Team suite................................................................64

Work with teams.............................................................64

Edit teams.........................................................................65

Nokia Team Suite settings..............................................65

Action bar settings...........................................................65

Converter.............................................................................66

Convert measurements...................................................66

Set base currency and exchange rate............................66

Zip manager........................................................................66

PDF reader...........................................................................67

Printing................................................................................67

Print files...........................................................................67

Printing options...............................................................67

Printer settings................................................................67

Clock.....................................................................................68

Alarm clock.......................................................................68

World clock.......................................................................68

Clock settings....................................................................68

Notes....................................................................................69

Write and send notes......................................................69

Nokia Wireless Keyboard...................................................69

Free time........................................................70

Camera.................................................................................70

Capture an image.............................................................70

Record a video clip...........................................................70

Camera settings...............................................................71

Gallery..................................................................................71

Work with media files and folders.................................71

View images.....................................................................71

Manage image files..........................................................72

RealPlayer............................................................................72

Play video clips and stream links...................................72

Send audio files and video clips.....................................73

View information about a media clip............................73

RealPlayer settings..........................................................73

Music player.........................................................................73

Listen to music.................................................................73

Track lists..........................................................................74

Music categories...............................................................74

Preset frequency settings...............................................74

Recorder..............................................................................74

Record a sound clip..........................................................75

Play a recording...............................................................75

Recorder settings.............................................................75

Instant messaging..............................................................75

Define IM settings............................................................75

Start a conversation.........................................................76

IM groups..........................................................................76

Block users........................................................................77

IM application settings....................................................77

Flash player.........................................................................78

Manage flash files............................................................78

Visual radio..........................................................................78

Listen to the radio...........................................................78

View visual content.........................................................79

Saved stations..................................................................79

Visual Radio settings.......................................................79

Push to talk.........................................................................79

PTT settings......................................................................80

Make a PTT call.................................................................80

Created PTT calls..............................................................80

Manage PTT contacts.......................................................80

Create a PTT channel.......................................................81

Exit PTT..............................................................................81

About GPS and satellite signals.........................................81

Positioning settings...........................................................82

Nokia Maps..........................................................................82

Download maps...............................................................82

Satellite information.......................................................83

Browse maps....................................................................84

Find a place.......................................................................84

Plan a route......................................................................84

Navigation........................................................................85

Guides...............................................................................85

GPS data...............................................................................85

Use GPS data.....................................................................86

Landmarks...........................................................................86

Create a landmark............................................................86

Edit landmarks.................................................................86

Landmark categories.......................................................87

Receive landmarks...........................................................87

Connectivity....................................................88

Fast downloading...............................................................88

Nokia PC Suite.....................................................................88

Data cable............................................................................88

Infrared................................................................................89

Bluetooth.............................................................................89

About Bluetooth...............................................................89

Send and receive data with Bluetooth..........................90

Pair devices.......................................................................91

Security tips......................................................................92

SIM access profile................................................................92

Wireless LAN........................................................................92

WLAN connections...........................................................93

See WLAN availability......................................................93

WLAN wizard....................................................................93

Internet access points........................................................94

Set up an internet access point for packet data

(GPRS)................................................................................95

Advanced internet access point settings for packet

data (GPRS).......................................................................95

Set up an access point for WLAN manually...................96

Advanced access point settings for WLAN.....................96

Modem.................................................................................96

Connection manager..........................................................97

View and end active connections...................................97

Search for WLAN...............................................................97

Security and data management.....................98

Lock the device...................................................................98

Memory card security.........................................................98

Fixed dialling.......................................................................99

Certificate manager............................................................99

View certificate details..................................................100

Certificate trust settings................................................100

Security modules..............................................................100

View and edit security modules...................................100

Back up data......................................................................101

Remote configuration......................................................101

Application manager........................................................102

Install applications........................................................102

Installation settings......................................................103

Java security settings....................................................103

Activation keys..................................................................104

Use activation keys........................................................104

Data synchronisation.......................................................105

Create a synchronisation profile..................................105

Select applications to synchronise...............................105

Synchronisation connection settings..........................106

Download!.........................................................................106

Select catalogs, folders, and items..............................106

Download! settings.......................................................107

Software updates.............................................................107

Settings........................................................108

General settings................................................................108

Personalisation settings...............................................108

Display settings...........................................................108

Standby mode settings..............................................109

Tone settings...............................................................109

Language settings......................................................109

Notification light.........................................................109

Date and time settings..................................................109

Enhancement settings...................................................110

Common enhancement settings...............................110

Security settings............................................................110

Device and SIM card security......................................110

Restore original settings...............................................111

Telephone settings...........................................................111

Call settings....................................................................111

Network settings...........................................................112

Connection settings..........................................................112

Access points..................................................................112

Packet data (GPRS) settings..........................................112

WLAN settings................................................................113

Advanced WLAN settings..............................................113

WLAN security settings..................................................113

WEP security settings....................................................114

WEP key settings............................................................114

802.1x security settings................................................114

WPA security settings....................................................114

Wireless LAN plugins.....................................................115

EAP plug-ins.................................................................115

Use EAP plug-ins..........................................................115

Session initiation protocol (SIP) settings....................115

Edit SIP profiles..............................................................115

Edit SIP proxy servers....................................................116

Edit registration servers................................................116

Net call settings.............................................................116

Configuration settings...................................................116

Restrict packet data.......................................................117

Application settings.........................................................117

Shortcuts......................................................118

General shortcuts..............................................................118

Glossary........................................................120

Troubleshooting...........................................123

Battery information.....................................126

Charging and discharging................................................126

Nokia battery authentication guidelines.......................127

Authenticate hologram.................................................127

What if your battery is not authentic?........................127

Care and maintenance.................................128

Disposal.............................................................................128

Additional safety information.....................130

Small children...................................................................130

Operating environment...................................................130

Medical devices.................................................................130

Implanted medical devices...........................................130

Hearing aids...................................................................131

Vehicles..............................................................................131

Potentially explosive environments...............................131

Emergency calls................................................................132

CERTIFICATION INFORMATION (SAR).................................132

Index............................................................134

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the device at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY

Use only in the positions as explained in the product documentation. Do not touch the antenna areas unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your device.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.

About your device

The wireless device described in this guide is approved for use on the GSM 850, 900, 1800, 1900, and UMTS 850 and 2100 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded.

Your device supports internet connections and other methods of connectivity. Like computers, your device may be exposed to viruses, malicious messages and applications, and other harmful content. Exercise caution and open messages, accept connectivity requests, download content, and accept installations only from trustworthy sources. To increase the security of your

devices, consider installing, using, and regularly updating antivirus software, firewall, and other related software on your device and any connected computer.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

During extended operation, such as an active video sharing session or high-speed data connection, the device may feel warm. In most cases, this condition is normal. If you suspect the device is not working properly, take it to the nearest authorized service facility.

The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.

Network services

To use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so,

these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, and e-mail require network support for these technologies.

Enhancements, batteries, and chargers

Always switch the device off and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-5 charger.

The battery intended for use with this device is BP-6MT.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Get started

Model number: Nokia E51-1 (RM-244, with camera) and Nokia E51-2 (RM-426, without camera).

Hereinafter referred to as Nokia E51.

Insert the SIM card and battery

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor.

1. With the back of the device facing you, press the release button (1) and slide the back cover off (2).

2. If the battery is inserted, lift the battery in the direction of the arrow to remove it.

3. Insert the SIM card. Make sure that the contact area on the card is facing the connectors on the device and that the bevelled corner is facing the top of the device.

4. Insert the battery. Align the contacts of the battery with the corresponding connectors on the battery compartment and insert in the direction of the arrow.

5. Slide the back cover back to place.

Charge the battery

1. Connect a compatible charger to a wall outlet.

Connect the power cord to the device. If the battery is completely discharged, it may take a while before the charging indicator starts scrolling.

3. When the battery is fully charged, disconnect the charger from the device, then from the wall outlet.

Your battery has been precharged at the factory, but the charging levels may vary. To reach the full operation time, charge the battery until it has been fully charged according to the battery level indicator.

Tip: If you have old compatible Nokia chargers, you can use them with the Nokia E51 by attaching the CA-44 charger adapter to the old charger. The adapter is available as a separate enhancement.

Keys and parts

1 — Power key 2 — Earpiece 3 — Volume up key 4 — Mute key. Press the key to mute the microphone

during a call.

5 — Volume down key

6 — Navi™ scroll key. Press the scroll key to enter a

selection, to scroll left, right, up, and down on the display.

7 — Selection key. Press the selection key to perform the

function shown above it on the display.

8 — End key. Press the end key to reject a call, end active

calls and held calls, and with a long keypress, end data connections.

9 — Backspace key. Press the key to delete items. 10 — Shift key. When writing text, press and hold the key

and select the text with the scroll key. Press this key for a few seconds to toggle between the Silent and General profiles.

11 — Press the key for a few seconds to switch on

Bluetooth connectivity. When writing text, press the key and select More symbols to access special characters.

12 — Call key 13 — Selection key 14 — Infrared port 15 — Voice key. This key is used in the voice commands,

Recorder, and Push to talk applications.

16 — Notification light and light sensor 17 — Microphone 18 — Headset connector 19 — Wrist strap hole 20 — Mini-USB port 21 — Charger connector

1 — Home key 2 — Contacts key 3 — E-mail key 4 — Calendar key

Connect the headset

Warning: When you use the headset, your ability

to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Connect the compatible headset to the headset connector of your device.

Attach the wrist strap

Thread the wrist strap as shown, and tighten it.

First start-up

1. Press and hold the power key.

2. If the device asks for a PIN code or lock code, enter the code, and select OK.

3. When prompted, enter the country in which you are located and the current date and time. To find your country, enter the first letters of the country name. It is important to select the correct country, because scheduled calendar entries may change if you change the country later and the new country is located on a different time zone

4. The Welcome application opens. Select from the various options, or select Exit to close the application.

To configure the various settings in your device, use the Settings wizard application and the wizards available in the standby mode. When you switch the device on, it may recognise the SIM card provider and configure some settings automatically. You can also contact your service provider for the correct settings.

You can switch the device on with no SIM card inserted, in which case the device starts up in the offline mode, and you cannot use the network-dependent phone functions.

To switch the device off, press and hold the power key.

Lock the keys

When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device.

The keypad of your device locks automatically to prevent the keys from being accidentally pressed. To change the period after which the keypad is locked, select Menu >

Tools > Settings > General > Security > Phone and SIM card > Keypad autolock period.

To lock the keys manually in the standby mode, press the left selection key and *.

To unlock the keys, press the left selection key and *.

Tip: To lock the keys in the menu or in an open application, press the power key briefly, and select Lock keypad. To unlock, press the left selection key and *.

Display indicators

The device is being used in a GSM network (network service). The bar next to the icon indicates the signal strength of the network at your current location. The higher the bar, the stronger the signal.

The device is being used in a UMTS network (network

service).

The battery charge level. The higher the bar, the

stronger the charge in the battery.

You have one or more unread messag es in the Inbox

folder in Messaging.

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox

folder in Messaging.

You have one or more missed phone calls.

The keys of the device are locked.

An alarm is active.

You have selected the Silent profile, and the device does

not ring for an incoming call or message.

Bluetooth is active.

Data is being transmitted using Bluetooth connectivity. When the indicator is blinking, your device is trying to connect with another device.

An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection has been lost.

A GPRS packet data connection is available (network

service).

A GPRS packet data connection is active.

A GPRS packet data connection is on hold.

An EGPRS packet data connection is available (network

service).

An EGPRS connection is active.

An EGPRS packet data connection is on hold.

A UMTS packet data connection is available (network

service).

A UMTS packet data connection is active.

A UMTS packet data connection on hold.

High-speed downlink packet access (HSDPA) is supported and available (network service). The icon may vary between regions.

High-speed downlink packet access (HSDPA) is active. The icon may vary between regions.

High-speed downlink packet access (HSDPA) is on hold. The icon may vary between regions.

You have set the device to scan for WLANs, and a WLAN

is available.

A WLAN connection is active in a network that does not

have encryption.

A WLAN connection is active in a network that has

encryption.

Your device is connected to a computer with a USB

data cable.

The second phone line is being used (network service).

All calls are forwarded to another number. If you

have two phone lines, a number indicates the active line.

A headset is connected to the device.

The connection to a headset with Bluetooth

connectivity has been lost.

A hands-free car kit is connected to the device.

A loopset is connected to the device.

A text phone is connected to the device.

Your device is synchronising.

You have an ongoing push-to-talk connection.

Your push-to-talk connection is in the do not disturb

mode, because the ringing type setting of your device is set to Beep once or Silent, or you have an incoming or ongoing phone call. In this mode, you cannot make PTT calls.

Nokia support and contact information

Check www.nokia.com/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product.

If you need to contact customer service, check the list of local Nokia Care contact centres at www.nokia.com/ customerservice.

For maintenance services, check your nearest Nokia service centre at www.nokia.com/repair.

Your Nokia E51

The images in this guide may differ from your device display.

Welcome

When you switch on your device for the first time, the Welcome application opens. Select from the following:

• Tutorial provides information about your device and

shows you how to use it.

• Switch enables you to transfer content, such as

contacts and calendar entries, from a compatible Nokia device. See "Transfer content between

devices", p. 23.

• Settings wizard helps you configure various settings.

See "Settings wizard", p. 20.

• Operator contains a link to your operator's home

portal.

To open the Welcome application later, select Menu >

Help > Welcome.

The available items may vary between regions.

Settings wizard

Select Menu > Tools > Sett. wizard.

Settings wizard configures your device for settings based on your network operator information. To use these services, you may have to contact your service provider to activate a data connection or other services.

The availability of the different settings items in Settings wizard depends on the features of the device, SIM card, wireless service provider, and the availability of the data in the Settings wizard database.

If Settings wizard is not available from your service provider, it may not appear in the menu of your device.

To start the wizard, select Start. When you use the wizard for the first time, you are guided through the settings configuration. If there is no SIM card inserted, you need to select the home country of your service provider, and your service provider. If the country or service provider suggested by the wizard is not correct, select the correct one from the list. If the settings configuration is interrupted, the settings are not defined.

To access the main view of the Settings wizard after the wizard has finished the settings configuration, select OK.

In the main view, select Options and from the following:

• Operator — Configure operator-specific settings such

as MMS, internet, WAP, and streaming settings.

• E-mail settings — Configure e-mail settings.

• Push to talk — Configure push-to-talk settings.

• Video sharing — Configure video sharing settings.

If you are not able to use Settings wizard, visit the Nokia phone settings web site.

To use the basic standby mode, select Menu > Tools >

Settings > General > Personalisation > Standby mode > Active standby > Off.

Standby modes

Your device has two different standby modes: active standby mode and standby mode.

Active standby

After you have switched on your device and it is ready for use, but you have not entered any characters or made other selections, the device is in the active standby mode. In the active standby mode, you can view different indicators such as network operator indicators or indicators for alarms, and applications you want to access fast.

To select applications that you want to access from active standby, select Menu > Tools > Settings > General >

Personalisation > Standby mode > Active standby apps..

To change the functions of the selection keys in active standby, select Menu > Tools > Settings > General >

Personalisation > Standby mode > Shortcuts.

Standby

In the basic standby mode, you can see your service provider, time, and different indicators, such as indicators for alarms.

To view the most recently dialled numbers, press the call key. Scroll to a number or name, and press the call key again to call the number.

To call your voice mailbox (network service), press and hold 1.

To view calendar information, scroll right.

To write and send text messages, scroll left.

To change these shortcuts, select Menu > Tools >

Settings > General > Personalisation > Standby mode > Shortcuts.

Common actions in several applications

You can find the following actions in several applications:

To change the profile, or switch off or lock the device, press the power key briefly.

If an application consists of several tabs (see figure), open a tab by scrolling right or left.

To save the settings that you have configured in an application, select Back.

To save a file, select Options >

Save. There are different saving

options depending on the application you use.

To send a file, select Options >

Send. You can send a file in an

e-mail or multimedia message, or using Bluetooth connectivity or infrared.

To copy, press and hold the shift key, and select the text with the scroll key. Press and hold the shift key, and select

Copy. To paste, scroll to where you want to paste the text,

press and hold the shift key, and select Paste. This method may not work in applications that have their own copy and paste commands.

To select different items, such as messages, files, or contacts, scroll to the item you want to select. Select

Options > Mark/Unmark > Mark to select one item or Options > Mark/Unmark > Mark all to select all items.

Tip: To select almost all items, first select Options >

Mark/Unmark > Mark all, then select the items

you do not want, and Options > Mark/Unmark >

Unmark.

To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side of the object.

Transfer

Select Menu > Tools > Switch. You can transfer content, such as contacts, from a

compatible Nokia device to your new Eseries device using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the device model. If the other device supports synchronisation, you can also synchronise data between the two devices or send data from this device to the other device.

When you transfer data from your previous device, it may require you to insert the SIM card. Your new Eseries device does not need a SIM card when transferring data.

Content is copied from the memory of the other device to the corresponding location in your device. Copying time depends on the amount of data to be transferred. You can also cancel and continue later.

The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data

transfer earlier. The items that you can transfer vary depending on the other device.

Transfer content between devices

To connect the two devices, follow the instructions on the display. For some device models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display. On your new Eseries device, select the content you want to copy from the other device.

After the data transfer, you can save the shortcut with the transfer settings to the main view to repeat the same transfer later. To edit the shortcut, select Options >

Shortcut settings.

View transfer log

A transfer log is shown after every transfer.

To view the transfer details, scroll to the transferred item in the log, and select Options > Details.

To view the log of a previous transfer, scroll to a transfer shortcut, if available, in the main view, and select

Options > View log.

Any unresolved transfer conflicts are also displayed in the log view. To start solving conflicts, select Options > Solve

conflicts.

Synchronise, retrieve, and send data

If you have previously transferred data to your device with the Transfer application, select from the following icons in the Transfer main view:

Synchronise data with a compatible device if the other device supports synchronisation. With synchronisation, you can keep the data up-to-date in both devices.

Retrieve data from the other device to your new Eseries device.

Send data from your new Eseries device to your other device.

To customise a profile, select a profile and Options >

Personalise.

To change a profile, select a profile and Options >

Activate. The Offline profile prevents your device from

accidentally switching on, sending or receiving messages, or using wireless LAN, Bluetooth, or FM radio; it also closes any internet connection that may be in operation when the profile is selected. The Offline profile does not prevent you from establishing a wireless LAN or Bluetooth connection at a later time, or from restarting the FM radio, so comply with any applicable safety requirements when establishing and using these features.

To delete a profile that you created, select Options >

Delete profile. You cannot delete the predefined profiles.

Personalisation

You can personalise your device by adjusting the various tones, background images, and screen savers, for example.

Profiles

Select Menu > Tools > Profiles. You can adjust and customise the ringing tones, alert

tones, and other device tones for different events, environments, or caller groups. The profile currently in use is shown at the top of the display in the standby mode. However, if the active profile is General, only today's date is shown.

To create a new profile, select Options > Create new, and define the settings.

Select ringing tones

To set a ringing tone for a profile, select Options >

Personalise > Ringing tone. Select a ringing tone from

the list, or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser. Any downloaded tones are saved to Gallery.

To play the ringing tone for a selected contact group only, select Options > Personalise > Alert for, and select the desired group. Phone calls coming from outside that group have a silent alert.

To change the message tone, select Options >

Personalise > Message alert tone.

Customise profiles

Select Options > Personalise, and define the following:

• Ringing tone — Select a ringing tone from the list, or select Download sounds to open a bookmark folder containing a list of bookmarks for downloading tones using the browser. If you have two alternate phone lines in use, you can specify a ringing tone for each line.

• Video call tone — Select a ringing tone for video calls.

• Say caller's name — When you select this option and

someone from your contacts list calls you, the device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone.

• Ringing type — Select how you want the ringing tone

to alert.

• Ringing volume — Select the volume level of the ringing tone.

• Message alert tone — Select a tone for received text

messages.

• E-mail alert tone — Select a tone for received e-mail messages.

• IM alert tone — Select a tone for received instant messages.

• Vibrating alert — Select whether you want the device to vibrate when you receive a call.

• Keypad tones — Set the volume level of the device keypad tones.

• Warning tones — Set the warning tones on or off.

• Alert for — You can set the device to ring only upon

calls from phone numbers that belong to a selected contact group. Phone calls coming from outside that group have a silent alert.

• Profile name — You can give a name to a new profile

or rename an existing profile. The General and Offline profiles cannot be renamed.

Change the display theme

Select Menu > Tools > Themes.

To change the theme used in all applications, select the

General folder.

To change the theme used in the main menu, select the

Menu view folder.

To change the theme for a particular application, select the application-specific folder.

To change the background image for the standby mode, select the Wallpaper folder.

To select an image or write a text for the screen saver, select the Power saver folder.

Download a theme

To download a theme, select General or Menu view >

Download themes. Enter the link from which you want

to download your theme. Once the theme is downloaded, you can preview, activate, or edit it.

To preview a theme, select Options > Preview. To start using the selected theme, select Options > Set.

3-D ringing tones

Select Menu > Media > 3-D ringing tones.

To enable three-dimensional sound effects for ringing tones, select 3-D ringing tone effects > On. Not all ringing tones support 3–D effects.

To change the 3–D effect that is applied to the ringing tone, select Sound trajectory and the desired effect.

To modify the 3–D effect, select from the following:

• Trajectory speed — Select the speed at which sound

moves from one direction to another. This setting is not available for all effects.

• Reverberation — To adjust the amount of echo, select

the desired effect.

• Doppler effect — Select On to have the ringing tone

sound higher when you are closer to your device, and lower when you are farther away. This setting is not available for all effects.

To listen to the ringing tone with the 3–D effect, select

Options > Play tone.

To adjust the volume of the ringing tone, select Menu >

Tools > Profiles > Options > Personalise > Ringing volume.

Volume control

To adjust the earpiece volume during a phone call or the volume of the media applications, use the volume keys.

One-touch keys

With the One-touch keys you can access applications and tasks quickly. Each key has been assigned an application and a task. To change these, select Menu > Tools >

Settings > General > Personalisation > One-touch keys. Your network operator may have assigned

applications to the keys, in which case you cannot change them.

1 — Home key 2 — Contacts key 3 — E-mail key 4 — Calendar key

Home key

To access the main menu, press the home key briefly. Press the home key briefly again to access the active standby.

To view the list of active applications, press the home key for a few seconds. When the list is open, press the home key briefly to scroll the list. To open the selected application, press the home key for a few seconds, or press the scroll key. To close the selected application, press the backspace key.

Leaving applications running in the background increases the demand on battery power and reduces the battery life.

Contacts key

To open the Contacts application, press the contacts key briefly.

To create a new contact, press the contacts key for a few seconds.

Calendar key

To open the Calendar application, press the calendar key briefly.

To create a new meeting entry, press the calendar key for a few seconds.

E-mail key

To open your default mailbox, press the e-mail key briefly.

To create a new e-mail message, press the e-mail key for a few seconds.

Multitasking

You can have several applications open at the same time. To switch between active applications, press and hold the home key, scroll to an application, and press the scroll key. To close the selected application, press the backspace key.

Example: When you have an active phone call and want to check your calendar, press the home key to access the menu, and open the Calendar application. The phone call remains active in the background.

Example: When you are writing a message and want to check a web site, press the home key to access the menu, and open the Web application. Select a bookmark or enter the web address manually, and select Go to. To return to your message, press and hold the home key, scroll to the message and press the scroll key.

Memory

There are two types of memory into which you can save data or install applications: device memory and memory card.

Free memory

To see how much memory is currently in use, how much free memory remains, and how much memory is consumed by each data type, select Menu > Options >

Memory details > Phone memory or Memory card.

Tip: To ensure that you have adequate memory,

transfer data regularly to a memory card or computer, or use File manager to delete files you no longer need.

After you install applications to a compatible memory card, installation files (.sis) remain in the device memory. The files may use large amounts of memory and prevent

you from storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation files to a compatible PC, then use the file manager to remove the installation files from the device memory. If the .sis file is a message attachment, delete the message from the Messaging inbox.

Memory card

Select Menu > Tools > Memory. If you cannot use a memory card in your device, you may

have the wrong type of memory card, the card may not be formatted for your device, or the card has a corrupted file system. Your Nokia device supports the FAT16 and FAT32 file system for memory cards.

MicroSD

This device uses a microSD memory card. To ensure interoperability, use only

compatible microSD cards with this device. Check the compatibility of a microSD card with its manufacturer or provider. Other memory cards than microSD cards are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Insert the memory card

Use a memory card to save the memory on your device. You can also back up information from your device to the memory card.

The sales package of your device may not include a memory card. Memory cards are available as separate enhancements.

1. With the back of the device facing you, press the release button (1) and slide the back cover off (2).

2. Insert the memory card in the slot with the contact area first. Make sure that the contact area is facing the connectors on the device.

3. Push the card in until it locks into place.

4. Close the back cover.

Use a memory card

To format a memory card for your device, select Options >

Format memory card. When a memory card is formatted,

all data on the card is lost permanently. Consult your retailer to find out if you must format the memory card before you can use it.

To change the name of the memory card, select Options >

Memory card name.

You can protect a memory card with a password to prevent unauthorised access. To set a password, select Options >

Set password. The password can be up to eight characters

long and is case-sensitive. The password is stored in your device. You do not need to enter it again while you use the memory card in the same device. If you use the memory card in another device, you are asked for the password. Not all memory cards support password protection.

To remove the memory card password, select Options >

Remove password. When you remove the password, the

data on the memory card is not protected against unauthorised use.

To open a locked memory card, select Options > Unlock

memory card. Enter the password.

Eject the memory card

Important: Do not remove the memory card in the

middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

1. Press the power key briefly, and select Remove

memory card.

2. Press the release button and slide off the back cover.

3. Press the end of the memory card to release it from the memory card slot.

4. Close the back cover.

Write text

The input methods provided in the device may vary according to different sales markets.

Traditional text input

is shown on the top right of the display when you

are writing text using traditional text input.

and indicate the selected case. indicates that the first letter of the sentence is written in uppercase and all the other letters are automatically written in lowercase.

To write text with the keypad, press a number key 2-9 repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key. If the next letter is located on the same key as the present one, wait until the cursor appears, and enter the letter.

To insert a number, press and hold the number key.

To switch between the upper and lower case mode and the number mode, press #.

To erase a character, press the backspace key. Press and hold the backspace key to erase more than one character.

To access the most common punctuation marks, press the 1 key. Press 1 repeatedly to reach the desired punctuation mark.

To add special characters, press *. Scroll to the desired character and press the scroll key.

indicates the number mode.

To insert a space, press 0. To move the cursor to the next line, press 0 three times.

To switch between the different character cases, press #.

Predictive text input

1. To activate predictive text input, press # twice quickly.

This activates predictive text input for all editors in the device. The indicator

2. To write the desired word, press 2-9. Press each key

only once for one letter.

3. When you have finished writing the word and it is

correct, scroll right to confirm it, or press 0 to add a space.

If the word is not correct, press * repeatedly to view the matching words the dictionary has found.

If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, select Spell, enter the word (up to 32 letters) using traditional text input, and select

OK. The word is added to the dictionary. When the

dictionary is full, the new word replaces the oldest added word.

Write the first half of a compound word; to confirm it, scroll right. Write the last part of the compound word. To complete the compound word, press 0 to add a space.

To switch predictive text input off for all editors in the device, press # twice quickly.

is shown on the display.

Change the writing language

When you are writing text, you can change the writing language. For example, if you press the 6 key repeatedly to reach a specific character, changing the writing language gives you access to characters in a different order.

If you are writing text using a non-Latin alphabet and want to write Latin characters, for example e-mail or web addresses, you may need to change the writing language. To change the writing language, select Options >

Writing language, and a writing language that uses Latin

characters.

Antennas

Your device has internal antennas.

Note: As with any other radio transmitting device,

do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. To optimize antenna performance and battery life, avoid contact with the antenna area when operating the device.

Further information

Instructions in your device

To read instructions for the current view of the open application, select Options > Help.

To browse the help topics and conduct searches, select

Menu > Help > Help. You can select categories for which

you want to see instructions. Select a category, such as Messaging, to see what instructions (help topics) are available. While you are reading the topic, scroll left or right to see the other topics in that category.

To switch between the application and help, press and hold the home key.

Tutorial

The tutorial provides you information about your device and shows you how to use it. Select Menu > Help >

Tutorial.

Business communications

Your device provides you with efficient tools for voice communication and contact and time management.

Telephone

To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in the service area of a cellular network.

To make or receive a net call, your device must be connected to a net call service. To connect to a net call service, your device must be in the coverage of a connection network, such as a WLAN access point.

Voice calls

Note: The actual invoice for calls and services from

your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

Answer a call

To answer a call, press the call key.

To reject a call, press the end key.

To mute the ringing tone instead of answering a call, select

Silence.

When you have an active call and the call waiting function (network service) is activated, press the call key to answer a new incoming call. The first call is put on hold. To end the active call, press the end key.

Make a call

Important: If the device has been locked, enter the

lock code to activate the phone function. When the device is locked, calls may be possible to the official emergency number. Making an emergency call in the offline profile or when the device is locked requires that the device recognize the number to be an official emergency number. It is advisable to change the profile or unlock the device by entering the lock code before you make the emergency call.

To make a call, enter the phone number, including the area code, and press the call key.

Tip: For international calls, add the + character that replaces the international access code, and enter the country code, area code (omit the leading 0, if necessary), and phone number.

To end the call or cancel the call attempt, press the end key.

To make a call using the saved contacts, select Contacts in the standby mode. Enter the first letters of the name,

scroll to the name, and press the call key. See

"Contacts", p. 40.

To make a call using the log, press the call key to view up to 20 numbers that you last called or attempted to call. Scroll to the desired number or name, and press the call

See "Log", p. 39.

key.

To ad ju st t he vo lum e o f a n ac tive call, use the volume keys. To switch from a voice call to a video call, select Options >

Switch to video call. The device ends the voice call and

makes a video call to the recipient.

Make a conference call

1. To make a conference call, enter a participant's phone number, and press the call key.

2. When the participant answers, select Options > New

call.

3. When you have made a phone call to all the participants, select Options > Conference to merge the calls into a conference call.

To mute the microphone of your device during the call, select Options > Mute.

To drop a participant from the conference call, scroll to the participant, and select Options > Conference > Drop

participant.

To discuss privately with a conference call participant, scroll to the participant, and select Options >

Conference > Private.

Fax calls

To make and receive fax calls, connect your device to a compatible computer or fax machine. To activate the fax

modem, select Options > Activate modem. You can answer incoming fax calls only from the computer or fax machine connected to your device.

To reject an incoming fax call, select Options > Reject.

To reject a call while a fax call is in progress, select

Reject.

A fax call cannot be put on hold.

Video calls

To be able to make a video call, you need to be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. While talking, you can see a real-time, two-way video between you and the recipient of the call, if the recipient has a compatible mobile phone. The video image captured by the camera in your device is shown to the video call recipient. A video call can only be made between two parties.

Make a video call

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume may be extremely loud.

To make a video call, enter the phone number or select the recipient of the call from Contacts, and select Options >

Call > Video call. When the video call starts, the camera

of the device is activated. If the camera is already in use, video sending is disabled. If the recipient of the call does not want to send a video back to you, a still image is shown instead. You can define the still image in Menu > Tools >

Settings > Phone > Call > Image in video call.

To disable the sending of audio, video, or video and audio, select Options > Disable > Sending audio, Sending

video, or Sending aud. & video.

To use the loudspeaker for receiving audio, select

Options > Activate loudspeaker. To mute the

loudspeaker and use the earpiece, select Options >

Activate handset.

To swap the places of images, select Options > Change

image order.

To zoom the image on the display, select Options >

Zoom in or Zoom out.

To end the video call and make a new voice call to the same recipient, select Options > Switch to voice call.

Share a video

Use Video sharing (network service) to send live video or a video clip from your mobile device to another compatible mobile device during a voice call.

1. Make a phone call to the selected recipient. You can start sharing a video once the phone call is established and your device has been registered to the SIP server.

2. To send live video or a video clip from your device, select Options > Share video > Live or Clip. To preview the clip, select Options > Play.

3. Select the recipient from Contacts, or enter the recipient's SIP address manually to send an invitation to the recipient. Sharing begins automatically when the recipient accepts the video sharing.

4. To end sharing the video, select Stop. The voice call

continues normally.

Receive a video sharing invitation

When you receive a video sharing invitation, a message is displayed showing the caller's name or SIP address.

To accept the invitation and begin the sharing session, select Accept.

To reject the invitation, select Reject. The voice call continues normally.

Net calls

Select Menu > Connectivity > Internet tel.. Your device supports voice calls over the internet (net

calls). Your device attempts emergency calls primarily over cellular networks. If an emergency call using cellular networks is not successful, your device attempts an emergency call through your net call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if possible. If you have cellular network coverage available, make sure that your cellular phone is switched on and ready to make calls before you attempt an emergency call. The capability for an emergency call using internet telephony depends on the availability of a WLAN and your net call provider's implementation of emergency call capabilities. Contact your net call provider to check the internet telephony emergency call capability.

With the net call service (network service), you can make and receive calls over the internet using the VoIP (voice over internet protocol) technology. Net calls can be established between computers, between mobile phones, and between a VoIP device and a traditional telephone. To make or receive a net call, your device must be within

WLAN coverage, for example. The availability of the net call service may vary according to your country or area.

Create a net call profile

Before you can make net calls, you need to create a net call profile.

1. Select Menu > Tools > Settings > Connection >

SIP settings > Options > New SIP profile, and enter

the required information. To make the login to the net call service automatic, select Registration > Always

on. Contact your net call provider for the correct

settings.

2. Select Back until you return to the Connection settings

main view.

3. Select Internet tel. > Options > New profile. Enter

a name for the profile, and select the SIP profile you just created.

To set the created profile to be used automatically when connecting to the net call service, select Menu >

Connectivity > Internet tel. > Preferred profile.

To login to the net call service manually, select

Registration > When needed in the SIP settings when

creating a net call profile.

To make secure net calls, ask your service provider for secure net call settings. The proxy server selected for the net call profile must support secure net calls.

Connect to the net call service

To make or receive a net call, your device must be connected to a net call service. If you have selected automatic login, your device automatically connects to the

net call service. If you login to the service manually, select an available network from the list and Select.

The list of networks is refreshed automatically every 15 seconds. To refresh the list manually, select Options >

Refresh. Use this option if your WLAN is not shown on the

list.

To select a net call service for outgoing calls if the device is connected to more than one service, select Options >

Change service.

To configure new services, select Options > Configure

service. This option is shown only if there are services that

have not been configured.

To save the network to which you are currently connected, select Options > Save network. The saved networks are marked with a star on the list of networks.

To connect to a net call service using a hidden WLAN, select

Options > Use hidden network.

To end the connection to a net call service, select

Options > Disconnect from serv..

Make net calls

You can make a net call from all applications where you can make a regular voice call. For example in Contacts, scroll to the desired contact, and select Call > Internet

call.

To make a net call in the standby mode, enter the SIP address, and press the call key.

To make a net call to an address that does not start with a digit, press any number key when the device is in the standby mode, then press # for a few seconds to clear the display and to switch the device from the number mode

to the letter mode. Enter the address, and press the call key.

To set net call as the preferred call type for outgoing calls, select Menu > Connectivity > Internet tel. >

Options > Settings > Default call type > Internet call. When your device is connected to a net call service,

all calls are made as net calls.

Net call service settings

Select Options > Settings, scroll to the settings of the desired service, and press the scroll key.

To login automatically to the net call service, select Login

type > Automatic. If you use the automatic login type

for WLANs, the device periodically scans for WLANs, which increases the demand on battery power and reduces the battery life.

To login manually to the net call service, select Login

type > Manual.

To view the networks you have saved for the net call service and the networks detected by the net call service, select Saved conn. networks.

To define the service-specific settings, select Edit service

settings. This option is only available if a service-specific

software plug-in has been installed in the device.

Speed dialling

Select Menu > Tools > Settings > Phone > Call >

Speed dialling > On.

Speed dialling allows you to make a call by pressing and

holding a number key in the standby mode.

To assign a number key to a phone number, select Menu >

Tools > Speed dial. Scroll to the number key (2 - 9) on

the display, and select Options > Assign. Select the desired number from Contacts.

To delete the phone number assigned to a number key, scroll to the speed dialling key, and select Options >

Remove.

To modify a phone number assigned to a number key, scroll to the speed dialling key, and select Options >

Change.

Call divert

Select Menu > Tools > Settings > Phone > Call

divert.

Divert incoming calls to your voice mailbox or to another phone number. For details, contact your service provider.

Select to divert voice or fax calls, and select from the following options:

• All voice calls or All fax calls — Divert all incoming

voice or fax calls.

• If busy — Divert incoming calls when you have an

active call.

• If not answered — Divert incoming calls after your

device rings for a specified period of time. Select the time you let the device ring before diverting the call in the Delay time: list.

• If out of reach — Divert calls when the device is

switched off or out of network coverage.

• If not available — Activate the last three settings at

the same time. This option diverts calls if your device is busy, not answered, or out of reach.

To divert calls to your voice mailbox, select a call type and a diverting option, then select Options > Activate > To

voice mailbox.

To divert calls to another phone number, select a call type and a diverting option, then select Options > Activate >

To other number. Enter a number in the Number: field,

or select Find to retrieve a number saved in Contacts.

To check the current diverting status, scroll to the diverting option, and select Options > Check status.

To stop diverting calls, scroll to the diverting option, and select Options > Cancel.

Call barring

Select Menu > Tools > Settings > Phone > Call

barring.

You can bar the calls that can be made or received with the device (network service). To change the settings, you need the barring password from your service provider. Call barring affects all call types.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls may be possible to certain official emergency numbers.

To bar calls, select Voice call barring and from the following options:

• Outgoing calls — Prevent making voice calls with your

device.

• Incoming calls — Prevent incoming calls.

• International calls — Prevent calling to foreign

countries or regions.

• Incoming calls when abroad — Prevent incoming

calls when outside your home country.

• International calls except to home

country — Prevent calls to foreign countries or regions,

but allow calls to your home country.

To check the status of voice call barrings, select the barring option and Options > Check status.

To stop all voice call barrings, select a barring option and

Options > Cancel all barrings.

To change the password used for barring voice and fax calls, select Voice call barring > Options > Edit barring

password. Enter the current code, then the new code

twice. The barring password must be four digits long. For details, contact your service provider.

Bar net calls

Select Menu > Tools > Settings > Phone > Call

barring > Internet call barring.

To reject net calls from anonymous callers, select

Anonymous call barring > On.

Send DTMF tones

You can send dual tone multi-frequency (DTMF) tones during an active call to control your voice mailbox or other automated phone services.

Send a DTMF tone sequence

1. Make a call, and wait until the other end answers.

2. Select Menu > Options > Send DTMF.

3. Enter the DTMF tone sequence, or select a predefined sequence.

Attach a DTMF tone sequence to a contact card

1. Select Menu > Contacts. Open a contact, and select

Options > Edit > Options > Add detail > DTMF.

2. Enter the tone sequence. To insert a pause of about 2 seconds before or between DTMF tones, enter p. To set the device to send the DTMF tones only after you select

Send DTMF during a call, enter w.

3. Select Done.

Voice mail

Select Menu > Tools > Call mailbox. When you open the Voice mail application for the first

time, you are asked to enter the number of your voice mailbox.

To call your voice mail, select Options > Call voice

mailbox.

If you have configured net call settings to your device and have an internet call mailbox, select Internet call

mailbox > Options > Call voice mailbox to call it.

To call your voice mail in the standby mode, press and hold 1; or press 1 and then the call key. If you have defined an internet call mailbox, select whether you want to call your voice mail or internet call mailbox.

To change the voice mailbox number, select the mailbox and Options > Change number.

To change the internet call mailbox address, select the

mailbox and Options > Change address.

Voice aid

Select Menu > Tools > Voice aid. The Voice aid application reads text on the display,

allowing you to use the basic functions of your device without looking at the display.

To hear the entries in your contacts list, select Contacts. Do not use this option if you have more than 500 contacts.

To hear information on your missed and received calls, dialled numbers, and frequent calls, select Recent calls.

To listen to your voice messages, select Voice mailbox.

To dial a telephone number, select Dialler. To hear the current time, select Clock > Time. To hear the

current date, select Clock > Date.

To hear more options, select Options.

Voice commands

Select Menu > Tools > Voice comm.. Use voice commands to make phone calls and launch

applications, profiles, or other functions on the device. The device creates a voice tag for the entries in Contacts

and for the functions designated in the Voice commands application. When a voice command is spoken, the device compares the spoken words to the voice tag in the device. Voice commands are not dependent on a speaker’s voice; however, the voice recognition in the device adapts to the main user’s voice to recognise voice commands better.

Make a call

A voice tag for a contact is the name or nickname that is saved on the contact in Contacts.

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

To listen to a voice tag, open a contact, and select

Options > Play voice tag.

1. To make a call using a voice command, press and hold the voice key.

2. When you hear the tone or see the visual display, clearly speak the name saved on the contact.

3. The device plays a synthesised voice tag for the recognised contact in the selected device language, and displays the name and number. After a timeout of

1.5 seconds, the device dials the number. If the recognised contact was not correct, select Next to view a list of other matches or Quit to cancel dialling.

If several numbers are saved under the contact, the device selects the default number, if it has been set. Otherwise, the device selects the first available number of the following fields: Mobile, Mobile (home),

Mobile (business), Telephone, Tel. (home), and Tel. (business).

To launch an application using a voice command, press and hold the voice key, and clearly speak the name of the application. If the recognised application was not correct, select Next to view a list of other matches or Quit to cancel.

To add more applications to the list, select Options >

New application.

To change the voice command of an application, select

Options > Change command, and enter the new

command.

Change profiles

The device creates a voice tag for each profile. To set on a profile using a voice command, press and hold the voice key, and say the name of the profile.

To change the voice command, select Profiles >

Options > Change command.

Voice command settings

To switch off the synthesiser that plays recognised voice commands in the selected device language, select

Settings > Synthesiser > Off.

To reset voice recognition learning when the main user of the device has changed, select Remove voice adapts..

Launch an application

The device creates voice tags for the applications listed in the Voice commands application.

Log

Select Menu > Log.

Log stores information about the communication history of the device. The device registers missed and received calls only if the network supports these functions, the device is switched on and within the network service area.

Call and data registers

To view recently missed, received, and dialled calls, select

Recent calls.

Tip: To open Dialled numbers in the standby

modes, press the call key.

To view the approximate duration of calls to and from your device, select Call duration.

To view the amount of data transferred during packet data connections, select Packet data.

Monitor all communications

To monitor all voice calls, text messages, or data connections registered by the device, open the general log tab.

To view detailed information about a communication event, scroll to it, and press the scroll key.

Tip: Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or web pages are shown as packet data connections.

To add the phone number from a communication event to Contacts, select Options > Save to Contacts, and select

to create a new contact or to add the phone number to an existing contact.

To copy the number, for example to paste it to a text message, select Options > Copy number.

To view a single type of communication event or communication events with one other party, select

Options > Filter, and select the desired filter.

To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select

Options > Clear log.

Call and send messages from Log

To call back a caller, select Recent calls and open Missed

calls, Received calls, or Dialled numbers. Select the

caller, and Options > Call.

To reply to a caller with a message, select Recent calls and open Missed calls, Received calls, or Dialled numbers. Select the caller, and select Options > Create message. You can send text messages and multimedia messages.

Log settings

To set the time for keeping all communication events in the log, select Options > Settings > Log duration, and the time. If you select No log, all log contents are permanently deleted.

Contacts

Select Menu > Contacts.

You can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact. You can also create contact groups, which allow you to send text or e-mail messages to many recipients at the same time. You can add received contact information (business cards) to Contacts. Contact information can only be sent to or received from compatible devices.

Copy contacts between SIM and device memory

If you already have contacts saved on your SIM card, you can copy them to the device memory.

To copy contacts from a SIM card to the device memory, select Options > SIM contacts > SIM directory. Mark the contacts to copy, or select Options > Mark/

Unmark > Mark all to copy all contacts. Select Options > Copy to Contacts.

To copy contacts from the device memory to a SIM card, select Options > Copy to SIM directory. Mark the contacts you want to copy, or select Options > Mark/

Unmark > Mark all to copy all contacts. Select Options > Copy to SIM directory.

Tip: If you have saved contacts on your previous

device, you can use the Transfer application to copy

See "Transfer content between

them.

devices", p. 23.

Manage contacts

To add a new contact, select Options > New contact.

To attach a small thumbnail image to a contact, select

Options > Edit > Options > Add thumbnail. The

thumbnail image is shown when the contact calls.

To listen to the voice tag assigned to the contact, select

Options > Play voice tag.

To search for a contact, enter the first letters of the name to the search field. A list of the contacts starting with the letters appear on the display.

To edit information in a contact, select Options > Edit.

Tip: You can also use Nokia PC Suite to add and edit contacts.

To send contact information, select Options > Send. You can assign a default number or address to a contact

so you can easily call or send a message to the default number or address, even if several numbers or addresses are saved to that contact. The default number is also used in voice dialling.

To change the default information for a contact, open the contact, and select Options > Defaults. Select the number or address you want to set as a default. The default number or address is underlined in the contact.

To add a contact to a group, select Options > Add to

group (shown only if you have created a group).

Tip: To check to which groups a contact belongs,

select Options > Belongs to groups.

To add a speed dial key to the contact's phone number, select Options > Assign speed dial.

To change the display order of the first and last names of your contacts, select Options > Settings, and Last name

First name, or First name Last name.

To remove the assigned ringing tone, select Default

tone from the list of ringing tones.

Manage contact groups

You can create a contact group so that you can send messages to several recipients at the same time.

1. Open the contact groups tab, and select Options >

New group.

2. Enter a name for the group, and select OK.

3. Open the group, and select Options > Add

members.

4. Scroll to each contact you want to add to the group, and press the scroll key to mark it.

5. Select OK to add all marked contacts to the group.

To remove a contact from a contact group, scroll to the contact that you want to remove, and select Options >

Remove from group.

Add ringing tones for contacts

You can select a ringing tone for a contact or contact group. If the caller's phone number is sent with the incoming call and your device recognises the number, the ringing tone plays when the contact calls you.

To select a ringing tone for a contact or contact group, open the contact or contact group, and select Options >

Ringing tone. A list of ringing tones opens. Select the

ringing tone you want to use.

Send business cards

To send a business card, select the contact from Contacts, select Options > Send, and the sending method. Enter the phone number or address, or add a recipient from Contacts. Select Options > Send. If you select text message as the sending method, business cards are sent without thumbnail images.

Manage received business cards

To view a received business card, select Open from the displayed notification, or open the message from the Inbox folder in the Messaging application.

To save a received business card, select > Save business

card.

SIM directory

Select Options > SIM contacts > SIM directory. In the SIM directory, you can see the names and numbers

stored on the SIM card; add, edit, or copy numbers to contacts; and make calls.

To view a SIM contact, scroll to it, and press the scroll key. To add contacts to your SIM directory, select Options >

New SIM contact. Enter the contact information and

select Done.

To view the list of fixed dialling numbers, select Options >

SIM contacts > Fixed dial contacts. This setting is only

shown if supported by your SIM card.

To restrict calls from your device to selected phone numbers, select Options > Activate fixed dialling. You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed dialling contacts. Contact your service provider if you do not have the code.

To add new numbers to the fixed dialling list, select

Options > New SIM contact. You need the PIN2 code for

this function. When you use fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message centre number and the recipient's phone number must be included on the fixed dialling list. When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

To view your own numbers, if stored on the SIM card, select

Options > My numbers. For example, you may have

subscribed to two phone lines with the same SIM card. Not all SIM cards contain your own numbers.

To edit the contact information, select Options > Edit.

To copy the contact from the SIM directory to Contacts, select Options > Copy to Contacts.

To check the amount of free memory on your SIM card, select Options > SIM card details.

Calendar

Select Menu > Calendar.

You can create and view scheduled events and appointments. You can also set alarms for calendar entries. To synchronise your calendar data with a compatible computer, use Nokia PC Suite. See the Nokia PC Suite guide.

Create calendar entries

You can create the following types of calendar entries:

• Meeting entries have a specific date and time.

• Memo entries are related to the whole day but not to

a specific time of the day.

• Anniversary entries remind you of birthdays and

special dates. They refer to a certain day but not a specific time of the day. Anniversary entries are repeated every year.

• To-do entries remind you of a task that has a due date

but not a specific time of the day.

To create a calendar entry, scroll to a date, and select

Options > New entry. Select the entry type. The available

settings for meeting, memo, anniversary, and to-do entries vary.

Select from the following:

• Subject or Occasion — Enter a description for the

entry.

• Location — Enter the location information.

• Start time — Enter the start time.

• End time — Enter the end time.

• Start date or Date — Enter the start date or date the

event occurs.

• End date — Enter the end date.

• Alarm — Set an alarm for meeting and anniversary

entries. The alarm is displayed in the day view.

• Repeat — Specify whether you want the entry to be

repeated and when. Define the repeat type, frequency, and possible ending date.

• Synchronisation — If you select Private, the calendar

entry can be seen only by you and is not shown to others with online access to view the calendar. If you select

Public, the calendar entry is shown to others who have

access to view your calendar online. If you select

None, the calendar entry is not copied to your

computer when you synchronise.

Tip: Make sure you have selected the correct city in the Clock application, because scheduled calendar entries may change when the current city is changed and is on another time zone.

To edit an existing entry, scroll to the entry, and select

Options > Open. Edit the details in the various fields.

To delete a calendar entry, select Options > Delete, and select Before date to delete all entries before the selected date, or All entries to delete all calendar entries from the device.

Tip: When you edit or delete a repeated entry, choose how you want the change to take effect. If you select All calendar entries deleted, all repeated entries are deleted. If you select Delete

entry, only the current entry is deleted.

To send a calendar entry to a compatible device, select

Options > Send > Via text message, Via multimedia, Via e-mail, Via Bluetooth, or Via infrared. If the other device is not compatible with

Coordinated Universal Time (UTC), the time information of received calendar entries may not be displayed correctly.

To add a received calendar entry to your calendar, open the calendar entry attachment in the message, and select

Options > Save to Calendar.

To respond to a received calendar entry, select Accept,

Tentative, or Decline, if available. If you accept the entry

or mark it as tentative, the entry is added to your calendar. You can send a response to the sender of the calendar entry by e-mail. Select Yes, and the message is saved in Outbox to wait for sending.

Create a meeting entry

1. Scroll to a date, and select Options > New entry >

Meeting.

2. Enter the subject, location, start and end time, and the start and end dates, if needed.

3. To set an alarm for the meeting, select Alarm > On. Enter the alarm time and date.

4. Select whether this is a repeating meeting.

5. Define how the entry is handled during synchronisation in the Synchronisation field. Select

Private to hide the entry from viewers if the calendar

is available online, Public to make the entry visible to viewers if the calendar is available online, or None to prevent copying the entry to your computer when you synchronise.

To-do entries

You can create and maintain a task or list of tasks that must be done by a certain day. Each task can be assigned a due date, and an alarm.

Create a to-do entry

1. Scroll to a date, and select Options > New entry >

To-do.

2. Enter the subject in the Subject field.

3. Enter the due date.

4. To set an alarm for the to-do entry, select Alarm >

On. Enter the alarm time and date.

5. Specify a priority. The priority icons are ( ! ) High and ( - ) Low. There is no icon for Normal.

6. Define how the entry is handled during synchronisation in the Synchronisation field. Select

Private to hide the entry from viewers if the calendar

is available online, Public to make the entry visible to viewers if the calendar is available online, or None to not copy the entry to your computer when you synchronise.

Calendar views

The Calendar has four views: in the month view, you can see the entire month at one time; the week view shows the events for the selected week in seven day boxes; the day view shows the events for the selected day; and the to-do view shows the to-do items for the selected day.

Work in different views

To switch between the different calendar views, select

Options in any calendar view. Select the type of view from

the list. To set the default calendar view, select Options >

Settings > Default view, and the view you want.

To view a specific date, select Options > Go to date, and enter the date.

Month view

Select Options > Month view. In the month view, you can see the entire month at one

time. Each row shows one week of dates. The active month is displayed, and the active day is either today or the last day that was viewed. The active day is marked with a coloured square. Days that have scheduled events are marked with a small triangle. Press the scroll key to open the day's entry.

Week view

Select Options > Week view. The week view shows the events for the selected week in

seven day boxes. Today's date is marked with a coloured square. Memos and anniversaries are placed before 8:00 a.m.

To change the starting day of the week, select Options >

Settings > Week starts on.

Day view

Scroll to a day and press the scroll key. The day view shows the events for the selected day. Entries are grouped into time slots according to their starting time. To view the previous or next day, scroll left or right.

To-do view

Select Options > To-do view. The to-do view shows the to-do items for the selected day.

To mark a task as completed, select Options > Mark as

done.

To restore a task, select Options > Mark as not done.

Check the availability of services, pricing, and fees with your service provider. Service providers also give you instructions on how to use their services.

Calendar settings

Select Options > Settings.

To change the alarm tone, select Calendar alarm tone.

To change the view displayed when you open the calendar, select Default view.

To change the first day of the week, select Week starts

on.

To change the week view title, select Week view title and

Week number or Week dates.

Web

Select Menu > Web. To browse the web (network service), you need to

configure the internet access point settings. If you are using a GPRS connection, your wireless network must support GPRS, and the service must be activated for your SIM card.

Tip: You may receive the internet access point settings from your service provider as a special text message or from the service provider's web pages. You can also enter the internet access point settings manually.

See "Internet access points", p. 94.

Connection security

If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Security certificates may be required for some services, such as banking services. You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device. For more information, contact your service provider.

Browse the web

To browse the web, select a bookmark or enter the web address manually, and select Go to. Use only services that you trust and that offer adequate security and protection against harmful software.

Tip: When you start to enter the address, the addresses of the pages you have previously visited that match your input are displayed. To open a page, scroll to its address, and press the scroll key.

To move on a web page, use the scroll key, which is shown as a pointer on the page. When you move the pointer over a link, the pointer changes into a hand. Press the scroll key

to open the link. On a web page, new links usually appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.

The addresses of the pages you visit are saved in the Auto.

bookmarks folder.

Bookmarks

Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other thirdparty sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.

To view a bookmarked web page, scroll to the bookmark, and press the scroll key.

To browse to another web page, select Options >

Navigation options > Go to web address, enter the

page address, and select Go to.

To add a bookmark, select Options > Bookmark

manager > Add bookmark.

To organise your bookmarks, select Options >

Bookmark manager in the Web main view. You can move

and edit bookmarks, and create new folders.

Clear the cache

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache.

To empty the cache, select Options > Clear privacy

data > Clear cache.

Feeds and blogs

Select Menu > Web > Web feeds. Feeds usually contain headlines and articles, often about

recent news or other topics. Blog is a shortening of weblog, which is a continuously updated web diary.

To download a feed or blog, scroll to it, and press the scroll key.

To add or edit a feed or blog, select Options > Manage

feed > New feed or Edit.

End a connection

To end the connection and view the browser page offline, select Options > Tools > Disconnect. To end the connection and close the browser, select Options >

Exit.

Web settings

Select Menu > Web > Options > Settings. The Web settings are divided into four groups:

• General contains access point and home page related

settings.

• Page contains imaging, audio, and pop-up settings.

• Privacy contains settings related your privacy.

• Web feeds contains settings related to web feeds and

blogs.

Messaging

Select Menu > Messaging. In Messaging (network service), you can send and receive

text messages, multimedia messages, audio messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands.

Before sending or receiving messages, you may need to do the following:

• Insert a valid SIM card in the device and be located in the service area of a cellular network.

• Verify that the network supports the messaging features you want to use and that they are activated on your SIM card.

• Define the internet access point settings on the device.

See "Internet access points", p. 94.

• Define the e-mail account settings on the device.

"E-mail account settings", p. 59.

• Define the text message settings on the device.

"Text message settings", p. 58.

• Define the multimedia message settings on the device.

See "Multimedia message settings", p. 58.

The device may recognise the SIM card provider and automatically configure some of the message settings. If not, you may need to define the settings manually; or

contact your service provider to configure the settings.

See

Messaging folders

Messages and data received using Bluetooth connectivity or infrared are stored in the Inbox folder. E-mail messages are stored in Mailbox. Messages that you have been writing can be stored in the Drafts folder. Messages that are waiting to be sent are stored in the Outbox folder, and messages that have been sent, excluding Bluetooth and infrared messages, are stored in the Sent folder.

Tip: Messages are placed in Outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.

Note: The message sent icon or text on your device

screen does not indicate that the message is received at

See

the intended destination.

To request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service), select Options > Settings > Text

message or Multimedia message > Receive report.

The reports are saved in the Reports folder.

Organise messages

To create a new folder to organise your messages, select

My folders > Options > New folder.

To rename a folder, select Options > Re name folder. You can only rename folders that you have created.

To move a message to another folder, select Options >

Move to folder, the folder, and OK.

To sort messages in a specific order, select Options > Sort

by. You can sort the messages by Date, Sender, Subject,

or Message type.

To view the properties of a message, select the message and Options > Message details.

Message reader

The message reader reads received text, multimedia, and e-mail messages aloud. The message reader cannot read e-mail messages in add-on e-mail applications.

To play a message, press and hold the left selection key when you receive a message.

To start reading a message in Inbox or mailbox, select

Options > Listen.

To start reading the next message in Inbox or mailbox, scroll down. To start reading the message again, scroll up. In the beginning of the message, scroll up to hear the previous message.

To pause the reading, press the left selection key briefly. To continue, press the left selection key briefly again.

To end the reading, press the end key.

Speech

Select Menu > Tools > Speech. With Speech, you can set the language, voice, and voice

properties for the message reader.

Edit the voice properties

To set the language for the message reader, select

Language. To download additional languages to your

device, visit the Nokia web site or use the Download! application.

To set the speaking voice, select Voice. The voice is language-dependent.

To set the speaking rate, select Voice settings > Speed. To set the speaking volume, select Voice settings >

Volume.

To listen to a voice, open the voice tab, select the voice, and select Options > Play voice.

E-mail messages

Select Menu > Messaging > Mailbox. To receive and send e-mail, you must have a remote

mailbox service. This service may be offered by an internet service provider, a network service provider, or your company. Your device is compliant with internet standards SMTP, IMAP4 (revision 1), and POP3, and with

different vendor-specific e-mail solutions. Other e-mail providers may offer services with different settings or features than those described in this user guide. Contact your e-mail provider or service provider for more details.

Before you can send, receive, retrieve, reply to, and forward e-mail on your device, you must also do the following:

• Configure an internet access point.

points", p. 94.

• Set up an e-mail account, and define the e-mail settings correctly. To do this, use the mailbox guide, or define the account manually.

settings", p. 59.

Contact your service provider for the correct settings.

See "E-mail account

See "Internet access

Set up your e-mail with the mailbox guide

If you select Menu > Messaging > Mailbox, and have not set up your e-mail account, you are prompted to do so. To start setting up the e-mail account with the mailbox guide, select Yes.

1. To start entering the e-mail settings, select Start.

2. In Mailbox type, select IMAP4 or POP3, and select

Next.

Tip: POP3 is a version of the post office protocol

that is used to store and retrieve e-mail or internet mail messages from a server. IMAP4 is a version of the internet message access

protocol that lets you access and manage e-mail messages while the messages are still on the e-

mail server. You can then choose which messages to download to your device.

3. In My e-mail address, enter your e-mail address. Select Next.

4. In Incoming mail server, enter the name of the remote server that receives your e-mail, and select

Next.

5. In Outgoing mail server, enter the name of the remote server that sends your e-mail, and select

Next. Depending on your mobile operator, you might

have to use your mobile operator's outgoing mail server instead of your e-mail provider's.

6. In Access point, select the internet access point your device should use when it retrieves the e-mail. If you select Always ask, each time the device starts to retrieve e-mail, it asks which internet access point it should use. Select Next.

7. Enter a name for your new mailbox, and select

Finish.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

If you have defined several mailboxes, select one of them as your default mailbox. That mailbox is used every time you start composing a new e-mail message. To define the default mailbox, select Options > Settings > E-mail >

Default mailbox and the mailbox.

Connect to a remote mailbox

E-mail addressed to you is not automatically received by your device, but by your remote mailbox. To read your e-

mail, you must first connect to the remote mailbox; then select the e-mail messages you wish to retrieve into your device.

1. To retrieve received e-mail messages to your device and view them, select your mailbox in the Messaging main view. When the device asks Connect to

mailbox?, select Yes.

2. Enter your user name and password, if prompted.

3. Select Options > Retrieve e-mail > New to retrieve new messages that you have neither read nor retrieved, Selected to retrieve only messages you select from the remote mailbox, or All to retrieve all messages not previously retrieved.

4. To manage your e-mail offline to save in connection costs and work in conditions that do not allow a data connection, select Options > Disconnect to disconnect from the remote mailbox. Any changes you make in the remote mailbox folders while offline, take effect in your remote mailbox the next time you go online and synchronise.

Read and reply to e-mail

Important: Exercise caution when opening

messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.

To read a received e-mail, open it from the mailbox.

To open an attachment, select Options > Attachments. Scroll to the attachment, and press the scroll key.

To reply only to the sender of an e-mail, select Options >

Reply > To sender.

To reply to all recipients of an e-mail, select Options >

Reply > To all.

Tip: If you reply to an e-mail that contains attached

files, the attachments are not included in the reply. If you forward the received e-mail, the attachments are included.

To forward an e-mail, select Options > Forward. To attach a file to an e-mail message, select Options >

Insert and the attachment you want to add.

To delete an attachment from an e-mail that you are sending, select the attachment and Options > Remove.

To set the message priority, select Options > Sending

options > Priority.

To set the sending time for the e-mail message, select

Options > Sending options > Send message. Select Immediately, or select When conn. avail. if you are

working offline.

To call the sender of the e-mail message, if the sender can be found in Contacts, select Options > Call.

To reply to the sender of the e-mail with an audio message or multimedia message, select Options > Create

message.

Write and send e-mail

1. To write an e-mail, select New message > E-mail.

2. Select Options > Add recipient to select the

recipients' e-mail addresses from Contacts, or enter the e-mail addresses in the To field. Use a semicolon to separate entries. Use the Cc field to send a copy to other

recipients, or the Bcc field to send a blind copy to recipients.

3. In the Subject field, enter the subject of the e-mail.

4. Enter your e-mail message in the text area, and select

Options > Send.

folders are updated. This may take some time if the folders are large.

To update the list of folders, select a folder and Options >

Update folder list.

Delete messages

To free up memory space on your device, regularly delete messages from the Inbox and Sent folders, and delete retrieved e-mail messages.

To delete e-mail from the device only, and keep the original on the server, select Options > Delete > Phone

(header remains).

To delete e-mail both from the device and the remote server, select Options > Delete > Phone and server.

To cancel the deleting, select Options > Restore.

Subfolders in your remote email

If you create subfolders in your IMAP4 mailboxes on a remote server, you can view and manage these folders with your device when you subscribe to them. You can only subscribe to folders in your IMAP4 mailboxes.

To view folders in your IMAP4 mailbox, establish a connection, and select Options > E-mail settings >

Retrieval settings > Folder subscriptions.

To view a remote folder, select a folder and Options >

Subscribe. Every time you go online, the subscribed

Text messages

Select Menu > Messaging.

Write and send text messages

Select Menu > Messaging. Your device supports the sending of text messages beyond

the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message.

1. To write a text message, select New message > Text

message.

2. In the To field, enter a recipient's number, or press the

scroll key to add a recipient from Contacts. If you enter more than one number, separate the numbers with a semicolon.

3. Enter the text of the message. To use a template, select

Options > Insert > Template.

4. Select Options > Send.

Sending options for text messages

To select a message centre to send the message, select

Options > Sending options > Message centre in use.

To have the network send you delivery reports on your messages (network service), select Options > Sending

options > Receive report > Yes.

To define how long the message centre resends your message (network service) if the first attempt fails, select

Options > Sending options > Message validity. If the

recipient cannot be reached within the validity period, the message is deleted from the message centre.

To convert the message to another format, select

Options > Sending options > Message sent as > Text, Fax, Paging, or E-mail. Change this option only if

you are sure that your message centre is able to convert text messages into these other formats. Contact your service provider.

Text messages on the SIM card

Select Options > SIM messages. Te xt m essag es m ay b e st ore d on yo ur S IM c ard . Befo re y ou

can view SIM messages, you must copy the messages to a folder in the device. After copying the messages to a folder, you can view them in the folder or delete them from the SIM card.

1. Select Options > Mark/Unmark > Mark or Mark

all to mark every message.

2. Select Options > Copy.

3. Select a folder and OK to begin copying.

To view SIM card messages, open the folder where you copied the messages, and open a message.

View picture messages

Note: The picture message function can be used

only if it is supported by your service provider. Only compatible devices that offer picture message features can receive and display picture messages. The appearance of a message may vary depending on the receiving device.

To view a picture message, open the message from the Inbox folder.

To view information about the picture message, select

Options > Message details.

To save a message in a different folder, select Options >

Move to folder.

To add the sender of the message to Contacts, select

Options > Save to Contacts.

Forward picture messages

1. To forward the message, open the message from the

Inbox folder and select Options > Forward.

2. In the To field, enter a recipient's number, or press the

scroll key to add a recipient from Contacts. If you enter more than one number, separate the numbers with a semicolon.

3. Enter the text of your message. To use a template,

select Options > Insert > Template.

4. Select Options > Send.

Tip: To remove the picture from the message, select

Options > Remove picture.

Multimedia messages

Select Menu > Messaging. Only devices that have compatible features can receive

and display multimedia messages. The appearance of a message may vary depending on the receiving device.

A multimedia message (MMS) can contain text and objects such as images, sound clips, or video clips. Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your device may have recognised the SIM card provider and automatically configured the multimedia message settings. If not, use Settings wizard, or contact your service provider for the correct settings.

settings", p. 58.

Create and send multimedia messages

1. To create a new message, select New message >

Multimedia message.

See "Multimedia message

2. In the To field, enter a recipient's number or e-mail

address, or press the scroll key to add a recipient from Contacts. If you enter more than one number or e-mail address, separate them with a semicolon.

3. In the Subject field, enter a subject for the message.

To change the fields that are visible, select Options >

Address fields.

4. Enter the text of the message, and select Options >

Insert object to add media objects. You can add

objects such as Image, Sound clip, or Video clip. The wireless network may limit the size of MMS

messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.

5. Each slide of your message can contain only one video or sound clip. To add more slides to your message, select Options > Insert new > Slide. To change the order of slides in your message, select Options >

Move.

6. To preview a multimedia message before sending it, select Options > Preview.

7. Select Options > Send.

To delete an object from a multimedia message, select

Options > Remove.

To set the sending options for the current multimedia message, select Options > Sending options.

Receive and reply to multimedia messages

Important: Exercise caution when opening

messages. Messages may contain malicious software or otherwise be harmful to your device or PC.

Tip: If you receive multimedia messages that contain objects unsupported by your device, you cannot open them. Try to send these objects to another device such as a computer, and open them there.

1. To reply to a multimedia message, open the message,

and select Options > Reply.

2. Select Options and To sender to reply to the sender with a multimedia message, Via text message to reply with a text message, Via audio message to reply with an audio message, or Via e-mail to reply with an e-mail message.

Tip: To add recipients to your reply, select

Options > Add recipient to select the

recipients of the message from Contacts, or enter the recipients' phone numbers or e-mail addresses manually in the To field.

3. Enter the text of the message, and select Options >

Send.

Create presentations

Creating multimedia presentations is not possible if the

MMS creation mode setting is set to Restricted. To

change the setting, select Messaging > Options >

Settings > Multimedia message > MMS creation mode > Free.

1. To create a presentation, select New message >

Multimedia message.

2. In the To field, enter a recipient's number or e-mail

address, or press the scroll key to add a recipient from Contacts. If you enter more than one number or e-mail address, separate them with a semicolon.

3. Select Options > Create presentation and a

presentation template. A template may define which media objects you can include in the presentation, where they appear, and which effects are displayed between images and slides.

4. Scroll to the text area and enter the text.

5. To insert images, sound, video, or notes in your presentation, scroll to the corresponding object area, and select Options > Insert.

6. To add slides, select Insert > New slide.

To select the background colour for the presentation and background images for different slides, select Options >

Background settings.

To set effects between images or slides, select Options >

Effect settings.

To preview the presentation, select Options > Preview. Multimedia presentations may only be viewed in compatible devices that support presentations. They may appear different in different devices.

View presentations

To view a presentation, open the multimedia message from the Inbox folder. Scroll to the presentation, and press the scroll key.

To pause the presentation, press either selection key.

To resume playing the presentation, select Options >

Continue.

If the text or images are too large to fit on the display, select Options > Activate scrolling, and scroll to see the entire presentation.

To find phone numbers and e-mail or web addresses in the presentation, select Options > Find. You may use these numbers and addresses to make calls, send messages, or create bookmarks, for example.

Forward a multimedia message

Open Inbox, scroll to a multimedia notification, and press the scroll key. To send the message to a compatible device without retrieving it to your device, select Options >

Forward. If the server does not support multimedia

message forwarding, this option is not available.

1. In the To field, enter a recipient's number or e-mail

address, or press the scroll key to add a recipient from Contacts. If you enter more than one number or e-mail address, separate them with a semicolon.

2. Edit the message, if desired, and select Options >

Send.

Tip: To edit the delivery settings of the message,

select Options > Sending options.

View and save multimedia attachments

To view multimedia messages as complete presentations, open the message, and select Options > Play

presentation.

Tip: To view or play a multimedia object in a

multimedia message, select View image, Play

sound clip, or Play video clip.

To view the name and size of an attachment, open the message, and select Options > Objects.

To save a multimedia object, select Options > Objects, the object, and Options > Save.

Send a sound clip

1. To compose an audio message, select New

message > Audio message.

2. In the To field, enter a recipient's number or e-mail

address, or press the scroll key to add a recipient from Contacts. If you enter more than one number or e-mail address, separate them with a semicolon.

3. Select Options > Insert sound clip, and select

whether to record a sound clip or select one from Gallery.

4. Select Options > Send.

Sending options for multimedia messages

Select New message > Multimedia message >

Options > Sending options and from the following

options:

• Receive report — Select Yes if you want to receive a

notification when the message has been successfully delivered to the recipient. Receiving a delivery report of a multimedia message that has been sent to an email address may not be possible.

• Message validity — Select how long the messaging

centre tries to send the message. If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging centre. The network must support this feature. Maximum time is the maximum amount of time allowed by the network.

Special message types

Select Menu > Messaging. You can receive special messages that contain data, such

as operator logos, ringing tones, bookmarks, or internet access or e-mail account settings.

To save the contents of these messages, select Options >

Save.

Service messages

Service messages are sent to your device by service providers. Service messages may contain notifications such as news headlines, services, or links through which the message content can be downloaded.

To define the service message settings, select Options >

Settings > Service message.

To download the service or message content, select

Options > Download message.

To view information about the sender, web address, expiration date, and other details of the message before downloading it, select Options > Message details.

Send service commands

You can send a service request message (also known as a USSD command) to your service provider and request activation for certain network services. Contact your service provider for the service request text.

To send a service request message, select Options >

Service command. Enter the service request text and

select Options > Send.

Cell broadcast

Select Menu > Messaging > Options > Cell

broadcast.

With the cell broadcast network service, you can receive messages on various topics from your service provider, such as weather or traffic conditions in a particular region.

For available topics and relevant topic numbers, contact your service provider. Cell broadcast messages cannot be received when the device is in the remote SIM mode. A packet data (GPRS) connection may prevent cell broadcast reception.

Cell broadcast messages cannot be received in UMTS (3G) networks.

To receive cell broadcast messages, you may need to set the cell broadcast reception on. Select Options >

Settings > Reception > On.

To view messages related to a topic, select the topic.

To receive messages related to a topic, select Options >

Subscribe.

Tip: You can set important topics as hot topics.

While the device is in the standby mode, you are notified when you receive a message related to a hot topic. Select a topic, and select Options >

Hotmark.

To add, edit, or delete topics, select Options > Topic.

Messaging settings

Select Menu > Messaging > Options > Settings. Fill in all fields marked with Must be defined or wi th a r ed

asterisk. Your device may recognise the SIM card provider and

configure the correct text message, multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, order the settings

from your service provider in a configuration message, or use the Settings wizard application.

Text message settings

Select Options > Settings > Text message. Select from the following:

• Message centres — View the available message

centres for your device, or create a new one.

• Message centre in use — Select a message centre to

send the message.

• Character encoding — Select Reduced support to use

automatic character conversion to another encoding system when available.

• Receive report — Select Yes if you want the network

to send you delivery reports on your messages (network service).

• Message validity — Select how long the message

centre resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message centre.

• Message sent as — Convert the message to another format, such as Text, Fax, Paging, or E-mail. Change this option only if you are sure that your message centre is able to convert text messages into these other formats. Contact your service provider.

• Preferred connection — Select the preferred method of connection when sending text messages from your device.

• Reply via same centre — Select whether you want the reply message to be sent using the same text message centre number (network service).

Multimedia message settings

Select Options > Settings > Multimedia message.

Select from the following:

• Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image size.

• MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that may not be supported by the network or the receiving device. To receive warnings about including such content, select Guided. To create a multimedia message with no restrictions on attachment type, select Free. If you select Restricted, creating multimedia presentations is not possible.

• Access point in use — Select the default access point to connect to the multimedia message centre. You may not be able to change the default access point if it is preset in your device by your service provider.

• Multimedia retrieval — Select Always automatic to receive multimedia messages always automatically,

Auto in home netw. to receive notification of a new

multimedia message that you can retrieve from the message centre (for example, when you are travelling abroad and are outside your home network), Manual to retrieve multimedia messages from the message centre manually, or Off to prevent receipt of any multimedia messages.

• Allow anon. msgs. — Select whether you want to receive messages from unknown senders.

• Receive adverts — Select whether you want to receive messages defined as advertisements.

• Receive report — Select Yes to have the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

• Deny report sending — Select Yes to not send delivery

reports from your device for received multimedia messages.

• Message validity — Select how long the messaging

centre tries to send the message (network service). If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging centre. Maximum time is the maximum amount of time allowed by the network.

E-mail account settings

Select Menu > Messaging > Options > Settings > E-

mail.

If you try to edit mailbox settings but have not set up an e-mail account, the mailbox guide opens and helps you set up your e-mail account.

If you have defined a mailbox, scroll to it, and press the scroll key to edit the settings.

The settings available for editing may vary. Some settings may be preset by your service provider.

Connection settings

To define the connection settings, select an e-mail account and Options > Edit > Connection settings. To edit the settings for the e-mail you receive, select Incoming e-

mail. To edit the settings for the e-mail you send, select Outgoing e-mail.

User settings

To define the user settings for an e-mail account, select the account, select Options > Edit > User settings, and define the following settings:

• My name — Enter a name to appear before your e-mail

address when you send e-mail.

• Reply-to — Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address to which you want to direct the replies. You can only enter one address to which replies are directed.

• Delete e-mails from — Select whether you want to delete the e-mail messages only from the device or from both the device and the server. Select Always

ask if you want to confirm from where the e-mail

should be deleted every time you delete an e-mail.

• Send message — Select to send the e-mail immediately or when a connection is available.

• Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address in the Outgoing

e-mail settings.

• Include signature — Select whether you want to attach a signature to your e-mail messages.

• New e-mail alerts — Select whether you want to be notified of a new received e-mail message with a tone and a note.

Retrieval settings

To define the retrieval settings, select the e-mail account, select Options > Edit > Retrieval settings, and define the following settings:

• E-mail to retrieve — Select whether you want to retrieve only the e-mail header information such as sender, subject and date, e-mail, or e-mail with attachments. This setting is for POP3 mailboxes only.

• Retrieval amount — Select the number of e-mail

messages you want to retrieve from the remote server to your mailbox.

• IMAP4 folder path — Define the folder path for folders

to be subscribed. This setting is for IMAP4 mailboxes only.

• Folder subscriptions — Subscribe to other folders in

the remote mailbox and retrieve content from those folders. This setting is for IMAP4 mailboxes only.

Automatic retrieval settings

To define the automatic retrieval settings for an e-mail account, select the account, select Options > Edit >

Automatic retrieval, and define the following settings:

• E-mail retrieval — Select Enabled to retrieve new e-

mail messages automatically from your remote mailbox, or Only in home netw. to retrieve new e-mail messages automatically from your remote mailbox only when you are in your home network and not, for example, travelling.

• Retrieval days — Select the days on which e-mail is

retrieved to your device.

• Retrieval hours — Define the hours between which

the e-mail is retrieved.

• Retrieval interval — Select the interval between

retrieving new e-mail messages.

• E-mail notifications — Select whether you want to

receive notifications on received e-mail.

Service message settings

Select Menu > Messaging > Options > Settings >

Service message.

To receive service messages from service providers, select

Service messages > On.

To select how to download services and service message content, select Options > Settings > Service

message > Download messages > Automatically or Manually. If you select Automatically, you may still need

to confirm some downloads since not all services can be downloaded automatically.

Cell broadcast settings

Select Menu > Messaging > Options > Settings >

Cell broadcast.

To receive cell broadcast messages, select Reception >

On.

To select the languages in which you want to receive cell broadcast messages, select Language.

To display new topics in the cell broadcast topics list, select

Topic detection > On.

Other settings

Select Menu > Messaging > Options > Settings >

Other.

Select from the following:

• Save sent messages — Select whether to store sent

messages in the Sent folder.

• Number of saved msgs. — Enter the number of sent

messages to save. When the limit is reached, the oldest message is deleted.

• Memory in use — Select where to save your messages.

You can save messages to the memory card only if a memory card is inserted.

• Folder view — Define how you want the messages in

Inbox to be shown.

Nokia Office Tools

Nokia Office Tools support mobile business and enable effective communication with work teams.

Active notes

Select Menu > Office > Active notes. Active notes allows you to create, edit, and view different

kinds of notes, for example, meeting memos, hobby notes, or shopping lists. You can insert images, videos, and sound in the notes. You can link notes to other applications, such as Contacts, and send notes to others.

Create and edit notes

To create a note, start writing.

To edit a note, scroll to it, and press the scroll key.

To insert images, sound clips, video, business cards, web bookmarks, and files, select Options > Insert object.

To add new items to the note, select Options > Insert

new. You can record sound and video clips, and capture

images.

To add boldface, italics, or underlining to your text or change the font colour, press and hold the shift key and

use the scroll key to select the text. Then select Options >

Text.

To send the note using a text message, multimedia message, e-mail, Bluetooth, or infrared, select Options >

Send.

To link a note to a contact, select Options > Link note to

call > Add contacts. You can see the note on the display

of your device when making a call to or receiving a call from the contact.

Settings for Active notes

Select Settings.

To save notes to your device memory, select Memory in

use > Phone memory. To save them to a memory card,

select Memory in use > Memory card.

To change the layout of active notes, select Change

view > Grid. To view the notes as a list, select Change view > List.

To see a note in the background when making or receiving phone calls, select Show note during call > Yes.

Tip: If you temporarily do not want to see the notes during phone calls, select Show note during call >

No. This way you do not have to remove the links

between notes and contact cards.

Search

Select Menu > Office > Search. With Search, you can search for information in your

contacts, notes, calendar appointments, to-do notes, email messages, multimedia messages, and text messages. You can also search for files by the file names in your device memory and memory card.

Search for information

1. Select the content types you want to search in. To remove the selection, select it again. To include all content types in your search, select Select all.

2. Enter your search keywords or some part of the keywords.

3. Select Search.

Tip: Wildcards may help you find items. In your search keyword, use ? to substitute a single character, and * to substitute zero or more characters. If you use a wildcard, add * to the beginning and end of the search keyword.

To view the search results from your previous search, select Options > Previous results.

Calculator

Select Menu > Office > Calculator.

Note: This calculator has limited accuracy and is

designed for simple calculations.

To make a calculation, enter the first number of the calculation. Select a function such as add or subtract from the function map. Enter the second number of the calculation, and select =. The calculator performs operations in the order they are entered. The result of the calculation remains in the editor field and can be used as the first number of a new calculation.

The device saves the result of the last calculation in its memory. Exiting the Calculator application or switching off the device does not clear the memory. To recall the last saved result the next time you open the Calculator application, select Options > Last result.

To save the numbers or results of a calculation, select

Options > Memory > Save.

To retrieve the results of a calculation from the memory and use them in a calculation, select Options >

Memory > Recall.

Search results

To open the content, select the desired search result. You may then use the content, for example, to answer e-mail messages or edit documents.

To conduct a new search, select Options > New search.

File manager

With File manager, you can manage the contents and properties of files and folders on your device memory and memory card. You can open, create, move, copy, rename, send, and search for files and folders. Copyright protection may prevent sending some files.

Open the device tab or the memory card tab.

To select multiple files, scroll to each file, and select

Options > Mark/Unmark > Mark.

To send the selected files, select Options > Send.

To move or copy files or folders to another folder, select

Options > Move to folder or Copy to folder. Default

folders such as Sound clips in Gallery cannot be moved.

To search for files, select Options > Find. Enter the search text, and press the scroll key. The folders and files whose names contain the search text are displayed.

To view information about the selected file, select

Options > Details. To view additional information about

the file online, select Options > Additional details.

Quickoffice

Select Menu > Office > Quickoffice. Quickoffice consists of Quickword for Microsoft Word,

Quicksheet for Microsoft Excel, Quickpoint for Microsoft PowerPoint, and Quickmanager for purchasing software. You can view Microsoft Office 2000, XP, and 2003 documents (*.doc, *.xls, and *.ppt) with Quickoffice. If you have the editor version of Quickoffice, you can also edit files.

All file formats or features are not supported.

Work with files

To open a file, scroll to the corresponding tab, select the

file, and press the scroll key.

To create a new file, select Options > New file >

Quickword or Quicksheet.

To sort files according to the type, select Options > Sort

by.

To view the details of a file, select Options > Details. The details include the name, size and location of the file, and the time and date when the file was last modified.

To send files to a compatible device, select Options >

Send and the sending method.

Nokia Team suite

Select Menu > Office > Teams. With Nokia Team Suite, you can create, edit, and delete

teams, and send messages, view teams' web pages and communication history, and make phone calls to teams.

Work with teams

To create a new team, select Options > Team > Create

new. Give a name for the team and enter the conference

call service information, if needed. Then select the members for the team.

To select an action, first select the team to which you want to apply the action, then scroll to the action bar, and select the desired action. If you do not want to apply the action to all team members, open the team, and select the desired members. Then select the action.

To find more actions than are shown on the action bar, select

Options > Actions.

The following actions are available:

• Call — Make a phone call to the team or selected team

members. The team members are called one by one and put on hold until the calls can be merged into a conference call (network service). The maximum number of participants depends on the network service.

• Create message — Send a text message, a multimedia

message, or an e-mail to the team or selected team members.

• Call conference service — Start a call to the

conference call service (network service) defined for the selected team.

• Communication log — View the communication log

for the team or selected team members.

• Active notes — Write and read notes related to the

team.

• Team search — Search for content related to the team

or selected team members.

• Push to talk — Communicate through push to talk

(network service) with the team or selected team members.

• Team Web bookmarks — Open the bookmark folder

that contains the team web pages.

Edit teams

To add team members, select Options > Members >

Add.

To remove team members, select Options > Members >

Remove.

To edit the details of a member, select Options >

Members > Edit.

To see to which teams a member belongs, select

Options > Members > Belongs to teams.

Nokia Team Suite settings

To select whether to see the team members' pictures on the display, select Options > Settings > View contact

image.

To define the plug-in settings, select Options >

Settings > Plug-in settings. This setting is available only

if there are plug-ins to configure.

Action bar settings

Select Options > Settings > Action bar icons.

To show action buttons in the action bar, select the desired actions. To hide actions, remove the selection.

To change the order of the action buttons, select an action, and Options > Move up, Move down, Move to top, or

Move to bottom.

Tip: If you select not to show all actions in the action

bar, you can still access the actions by selecting

Options > Actions.

Converter

Select Menu > Office > Converter. The converter has limited accuracy, and rounding errors

may occur.

Convert measurements

1. Scroll to the Type field, and select Options >

Conversion type to open a list of me asures. Select the

measure to use, and select OK.

2. Scroll to the first Unit field, and select Options >

Select unit. Select the unit from which to convert, and

select OK. Scroll to the next Unit field, and select the unit to which to convert.

3. Scroll to the first Amount field, and enter the value to convert. The other Amount field changes automatically to show the converted value.

Set base currency and exchange rate

Note: When you change base currency, you must

enter new exchange rates because all previously set exchange rates are cleared.

Before you can make currency conversions, you must choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies.

1. To set the rate of exchange for the unit of currency,

scroll to the Type field, and select Options > Currency

rates.

2. Scroll to the currency type and enter the exchange rate you would like to set per single unit of currency.

3. To change the base currency, scroll to the currency, and select Options > Set as base currency.

4. Select Done > Yes to save the changes.

After you have inserted all the necessary exchange rates, you can make currency conversions.

Zip manager

Select Menu > Office > Zip. With Zip manager, you can create new archive files to store

compressed ZIP formatted files; add single or multiple compressed files or directories to an archive; set, clear, or change the archive password for protected archives; and change settings, such as compression level, and file name encoding.

You can store the archive files on the device memory or on a memory card.

PDF reader

Select Menu > Office > Adobe Reader. With PDF reader you can read PDF documents on the

display of your device; search for text in the documents; modify settings, such as zoom level and page views; and send PDF files using e-mail.

Printing

You can print a message or file from the device, preview a print job, define page layout options, select a printer, or print to a file. You may not be able to print all messages, such as multimedia messages or other special messages.

Print files

To configure a printer for your device, select Menu >

Office > Printers > Options > Add. To set the printer

as the default printer, select Options > Set as default. Before you print, make sure your device is properly

connected to the printer. To print a message or a file, select Options > Print. To print to a file, select Options > Printing options >

Print to file, and determine the location for the file.

To change the printing options, select Options >

Printing options. You can select the printer you want to

use, the number of copies and the range of pages you want to print.

To change the page layout before printing, select

Options > Printing options > Page setup. You can

change the paper size and orientation, define the margins, and insert a header or a footer. The maximum length of the header and footer is 128 characters.

To preview a file or message before you print, select

Options > Printing options > Preview.

Printing options

Open a file or message, and select Options > Printing

options.

Define the following options:

• Printer — Select an available printer from the list.

• Print — Select All pages, Even pages, or Odd pages

as the print range.

• Print range — Select All pages in range, Current

page, or Defined pages as the page range.

• Number of copies — Select the number of copies to

print.

• Print to file — Select to print to a file and determine

the location for the file.

Printer settings

Select Menu > Office > Printers. To add a new printer, select Options > Add.

Define the following:

• Printer — Enter a name for the printer.

• Driver — Select a driver for the printer.

• Bearer — Select a bearer for the printer.

• Access point — Select the access point.

• Port — Select the port.

• Host — Define the host.

• User — Enter the user.

• Queue — Enter the print queue.

• Orientation — Select the orientation.

• Paper size — Select the paper size.

Clock

Select Menu > Office > Clock. In Clock, you can view your local time and time zone

information, set and edit alarms, or modify date and time settings.

To change the alarm time, select Options > Reset

alarm.

To remove the alarm, select Options > Remove alarm.

World clock

Open the world clock tab to check the time in different cities.

To add a city to the world clock view, select Options >

Add city.

To change the city that determines the time and date in your device, select Options > Set as current city. The city is displayed in the Clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.

Alarm clock

Open the alarm clock tab.

To set an alarm, select Options > Set alarm. When an alarm is active,

To switch off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze. If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select

Stop, the device asks whether you want to activate the

device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

is displayed.

Clock settings

Select Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown in the standby modes, select

Clock type > Analogue or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-

update.

To change the alarm tone, select Clock alarm tone.

Notes

Select Menu > Office > Notes. You can create and send notes to other compatible

devices, and save received plain text files (.txt format) to Notes.

Write and send notes

To write a note, start entering the text. The note editor opens automatically.

To open a note, scroll to it, and press the scroll key.

To send a note to other compatible devices, select

Options > Send.

To synchronise or to define synchronisation settings for a note, select Options > Synchronisation. Select Start to initialise synchronisation or Settings to define the synchronisation settings for the note.

Nokia Wireless Keyboard

To set up the Nokia Wireless Keyboard or other compatible wireless keyboard supporting the Bluetooth Human Interface Devices (HID) profile for use with your device, use the Wireless keyboard application.

1. Activate Bluetooth connectivity on your device: select

Menu > Connectivity > Bluetooth > Bluetooth > On. Make sure that you have set My phone's visibility > Shown to all.

2. Switch on the keyboard.

3. Select Menu > Office > Wlss. keybd..

4. To start searching for devices with Bluetooth

connectivity, select Options > Find keyboard.

5. Select the keyboard from the list, and press the scroll key to start the connection.

6. To pair the keyboard with your device, enter a passcode of your choice (1 to 9 digits) on the device and the same passcode on your keyboard.

7. If you are asked for a keyboard layout, select it from a list on your device.

When the name of the keyboard appears, its status changes to Keyboard connected, and the indicator of your keyboard blinks slowly; the keyboard is ready for use.

For details on the operation and maintenance of your keyboard, see its user guide.

Free time

Your device contains a variety of media applications for both business and leisure time usage.

Camera

This section describes the camera in your E51-1 (RM-244) device.

Select Menu > Media > Camera.

Capture an image

Your device supports an image capture resolution of up to 1600x1200 pixels. The image resolution in this guide may appear different.

To capture an image, use the display as a viewfinder, aim at your subject, and press the scroll key. The device saves the image in the default folder, or in the folder you have defined.

Tip: To zoom in or out before taking a picture, scroll up or down.

If you do not want to keep the captured image, select

Options > Delete. Select Back to return to the viewfinder

to capture another image. Select Options > Go to

Gallery to view the image in Gallery.

If the light is dim, select Options > Night mode before capturing an image.

To adjust the image, select Options > Adjust > White

balance or Colour tone.

To capture images in a sequence, select Options >

Sequence mode. The camera captures six images in a

row. To capture timed images, select Options > Self-timer,

select the desired time-out, and press Activate. The camera captures an image after the time-out has passed.

Tip: To access the various camera modes quickly, select Options > Show toolbar.

To view the captured images, select Menu > Media >

Gallery > Images.

Record a video clip

1. Scroll to the video tab to activate the video recorder.

2. To start recording a video clip, press the scroll key. The remaining recording time is shown on the top of the display.

3. To pause the recording, select Pause; to resume the recording, select Continue.

4. To stop the recording, select Stop. The device saves the

clip in the default folder, or in the folder you have defined.

5. If you do not want to keep the saved video clip, select

Options > Delete. Select Back to return to the

viewfinder to record another video clip. Select

Options > Play to view the video clip in the RealPlayer

application.

Camera settings

Select Options > Settings.

To adjust image quality, to select whether images remain on the display after capturing them, and to change resolution, default name, or memory in which to save your new images, select Image.

To change the length, resolution, and default name of the videos you record or the memory in which to save them, select Video.

Work with media files and folders

To open a file or a folder, scroll to it, and press the scroll key.

To create a new folder, select a file and then select

Options > Organise > New folder. You cannot create

folders within folders.

To copy or move files, select a file and Options >

Organise > Move to folder, New folder, Move to memory card, Copy to memory card, Copy to phone mem., or Move to phone mem..

To download files into Gallery using the browser, select

Downl. graphics, Downld. videos, Downld. tracks, or Downld. sounds. The browser opens, and you can choose

a bookmark or enter the address for the download site. To search for a file, select Options > Find. Write the item

you are searching for. Files that match the search are shown.

Gallery

Select Menu > Media > Gallery. Use Gallery to access and use different types of media,

including images, videos, music, and sounds. All viewed images and videos, and all received music and sounds are automatically saved to Gallery. Sound clips are opened in the Music player, and video clips and streaming links in the RealPlayer application. Images are opened in the image viewer.

View images

To open an image for viewing, select Options > Open.

To open the next or previous image for viewing, scroll right or left.

To enlarge the image on the display, select Options >

Zoom in. To reduce the image on the display, select Zoom out.

To view the image in full screen size, select Options >

Full screen. To return to normal view, select Options > Normal screen.

To rotate the image, select Options > Rotate. Select

Right to rotate the image clockwise by 90 degrees, or

select Left to rotate the image counterclockwise by 90 degrees.

Manage image files

To view detailed information about the image, select

Options > View details.

To send the image, select Options > Send, and the method for sending.

To rename the image, select Options > Rename.

To set the image as the display background, select

Options > Use image > Set as wallpaper.

To add the image to a contact, select Options > Use

image > Assign to contact. The Contacts application

opens, and you can select the contact for the image.

RealPlayer

Select Menu > Media > RealPlayer. RealPlayer plays video clips and audio files that are stored

in the device memory or on a memory card, transferred to your device from an e-mail message or a compatible computer, or streamed to your device over the web. Supported formats include MPEG-4, MP4 (not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer does not necessarily support all variations of a media file format.

Play video clips and stream links

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume may be extremely loud.

To play a video clip or audio file, select Options > Open >

Most recent clips to play one of the six clips you most

recently played, or Saved clip to play a clip or open a web link. Select Play.

To play streaming media, select a web link that points to a clip, and select Play; or connect to the web, browse to a video clip or audio file, and select Play. RealPlayer recognises two kinds of links: an rtsp:// URL and an http:// URL that points to a RAM file. Before the content begins streaming, your device must connect to a web site and buffer the content. If a network connection problem causes a playback error, RealPlayer attempts automatically to reconnect to the internet access point.

To adjust the volume during playback, use the volume keys.

To fast-forward during playback, scroll up and hold. To rewind during play, scroll down and hold.

To stop the playback or streaming, select Stop. Buffering or connecting to the streaming site stops, the playback of the clip stops, and the clip rewinds to the beginning.

To download video clips from the web, select Options >

Download videos.

To view the video clip in full-screen size, select Options >

Play in full screen. Full screen increases the size of the

video to cover the maximum video area possible while the aspect ratio is maintained.

Tip: To switch between the normal screen and full screen quickly, press 2 on the keypad.

Send audio files and video clips

To transfer a media clip to a compatible device, select

Options > Send. Select the sending method.

To send a media clip inside a message, creat e a multimedia message, select a clip to attach and Insert object > Video

clip or Sound clip.

View information about a media clip

To view the properties of a video clip, audio file, or web link, select Options > Clip details. Information may include for example the bit rate or the internet link of a streaming file.

To set on file protection for a media clip, select Options >

Clip details > Status > Options > Change. File

protection prevents others from changing a file.

RealPlayer settings

You may receive RealPlayer settings in a message from your service provider.

To define the settings manually, select Options >

Settings > Video or Streaming.

Music player

Select Menu > Media > Music player. With Music player, you can play music files, and create and

listen to track lists. Music player supports files with extensions such as MP3 and AAC.

Listen to music

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To select a music track, select Options > Music library.

All tracks lists all music on your device. To view sorted

songs, select Albums, Artists, Genres, or Composers. To play the track, select Options > Play. To pause the

playing, scroll to

To fast-forward or rewind the track, scroll up or down and hold.

To select the previous or next track, scroll up or down.

To control the music volume, scroll right or left. To mute the volume, scroll left until the volume is muted.

To stop a track, scroll to

and press the scroll key.

To play the music tracks repeatedly, select Options >

Loop. Select All to repeat all the tracks in the current

folder, One to repeat the selected track, or Off to set off the repeating.

To play music in random order, select a folder and

Options > Random play.

After you have added or removed music files in the device, update your music library. Select Options > Update

Music library. Music player searches the device memory

for music files and updates them to the music library. To view music track information, select Options > View

details.

Track lists

You can create a new track list and add tracks to it, or edit a saved track list.

To create a new track list, select Options > Music

library > Track lists > Options > New track list.

To add a track to a track list, open the track list, and select

Options > Add tracks.

Music categories

To view music categories, select Music library > Artists,

Albums, Genres, or Composers.

To play all music tracks from a subcategory, scroll to a subcategory, and select Options > Play.

To view all tracks that belong to a subcategory, scroll to the subcategory, and press the scroll key.

To add all music tracks from a specific subcategory to a new, saved, or the currently playing track list, select

Options > Add to track list.

To delete all tracks from a category or subcategory, select

Options > Delete.

Preset frequency settings

Select Options > Equaliser.

To use a preset frequency setting when playing music, select the frequency setting you want to use, and select

Options > Activate.

To modify the frequency of a preset setting, select

Options > Edit, select a frequency band, and scroll up or

down to increase or decrease its value. You hear your frequency adjustment immediately in the playback.

To reset the frequency bands to their original values, select

Options > Reset to defaults.

To create your own frequency setting, select Options >

New preset. Enter a name for the frequency setting. Scroll

up or down to move between the frequency bands and set the frequency on each band.

Recorder

Select Menu > Media > Recorder. With Recorder, you can record up to 60 minutes of a voice

memo, save the voice recording as a sound clip, and play the sound clip. Recorder supports the AMR file format.

You can also press the voice key to open the Recorder application. If you have logged in to push to talk, the voice key works as a push-to-talk key and does not open Recorder.

Tip: Waveform files (.wav) are a more common audio file format, but adaptive multirate files (.amr) are smaller for comparable sound quality.

Record a sound clip

To record a sound clip, select Options > Record sound

clip. Select Pause to pause the recording, and Record to

resume recording. When you finish recording, select

Stop. The sound clip is automatically saved to the Sound

clips folder in Gallery.

Play a recording

To listen to the sound clip that you just recorded, select

Play. The progress bar displays the playing time, position,

and length of the clip. Select Stop to cancel the playback.

To pause the playback of a recorded clip, select Pause. Playback resumes when you select Play.

Recorder settings

Recordings are automatically saved to the device memory unless you change the default location. Recordings that you create or receive after you change the settings are affected.

To change the default location of saved recordings, select

Options > Settings > Memory in use.

To define the recording quality, select Options >

Recording quality.

Instant messaging

Select Menu > Connectivity > IM. Instant messaging (IM) (network service) allows you to

converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features.

If IM is not available from your service provider, it may not appear in the menu of your device. Contact your service provider for more information about signing up for IM services and costs of services. For more information on IM settings, contact your service provider.

You may receive the settings in a special text message from the service provider that offers the IM service. If not, enter the settings manually.

Define IM settings

To define the IM application settings, select Options >

Settings > IM settings. You can, for example, set your

screen name and IM alert tones.

To converse with an IM user or users, and to view and edit your IM contacts, you must log into an instant messaging server. To add an IM server, select Options > Settings >

Server settings > Servers. Ask your service provider for

the correct settings. To set the server as the one to which

your device automatically logs in, select Options >

Settings > Server settings > Default server.

To define how your device connects to the IM server, select

Options > Settings > Server settings > IM login type. To establish a connection between your device and

the default server automatically, select Automatic. To automate the connection only when in your home network, select Auto in home netw. To connect to the server when you open the IM application, select On app.

start-up. To connect to the server manually, select Manual and log into the server in the IM main view by

selecting Options > Log in. Enter your user ID and password at the prompt. You can obtain the user name, password, and other settings to log in from your service provider when you register for the service.

Start a conversation

Open Conversations. To search for IM users and user IDs, select IM contacts >

Options > New IM contact > Search. You can search by User's name, User ID, Phone number, and E-mail address.

To view a conversation, select a participant.

To continue the conversation, enter your message, and select Options > Send.

To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation.

To start a new conversation, select Options > New

conversation. You can start a new conversation with a

contact while you are inside an active conversation.

However, you cannot have two active conversations with the same contact.

To insert an image to an instant message, select

Options > Send image, and select the image you want

to send.

To save a conversation participant to your IM contacts, select Options > Add to IM contacts.

To save a conversation, while in the conversation view, select Options > Record chat. The conversation is saved as a text file that can be opened and viewed in the Notes application.

IM groups

Open IM groups. IM groups is available only if you are logged into an IM server, and the server supports IM groups.

To create an IM group, select Options > Create new

group.

To join an IM group or to continue a group conversation, scroll to the group, and press the scroll key. Enter a message, and select Options > Send.

To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new

group.

To leave the IM group, select Options > Leave IM

group.

To search for IM groups and group IDs, select IM

groups > Options > Search. You can search by Group name, Topic, and Members (user ID).

To add an IM user to the group, select Options > Add

member. Select a user from your IM contacts or enter the

contact ID. To remove a member from the IM group, select Options >

Remove.

To provide members with editing rights to the group, select Options > Add editor. Select a user from your IM contacts or enter the ID of the user. IM users with editing rights can edit group settings and invite other users to join the group or ban them from the group.

To remove editing rights from a group member, select

Options > Remove.

To prevent IM users from joining the group, select

Options > Add to banned list. Select a user from your

IM contacts or enter the ID of the user. To allow a banned user to join the group, select Options >

Remove.

Block users

Select IM contacts > Options > Blocking options >

View blocked list.

To find a blocked IM user, enter the first letters of the user's name. Matching names appear in a list.

To allow receiving messages from a blocked IM user, select

Options > Unblock.

To prevent receiving messages from other IM users, select

Options > Block new contacts. Select the IM user from

your IM contacts, or enter the user ID.

IM application settings

Select Options > Settings > IM settings and define the following settings:

• Use screen name — To change the name that identifies you in IM groups, select Yes.

• Show my availability — Select whether you allow all other IM users or only your IM contacts to see when you are online. Select To no-one to hide your online status.

• Allow messages from — Select to receive instant messages from all other IM users, yo ur IM c on ta cts o nl y, or not to receive messages at all.

• Allow invitations from — Select to receive invitations to IM groups from all IM u sers, your I M contacts o nly, or not to receive invitations at all.

• Msg. scrolling speed — To decrease or increase the speed at which new messages are displayed, scroll left or right.

• Sort IM contacts — Select to list your IM contacts alphabetically or by their online status.

• Availability reloading — To update the online status of your IM contacts automatically, select Automatic.

• Offline contacts — Select if IM contacts with an offline status are shown in the IM contacts list.

• Own message colour — Select the colour of the instant messages you send.

• Received msg colour — Select the colour of the instant messages you receive.

• Show date/ time info — Select Yes to view the receiving or sending time of each message in an IM conversation.

• IM alert tone — Select the tone that is played when you receive a new instant message.

Flash player

Select Menu > Media > Flash Player. With Flash player, you can view, play, and interact with

flash files made for mobile devices.

Manage flash files

To optimise the use of Flash Player, insert a memory card in your device.

To play a flash file, scroll to it, and press the scroll key. To send a flash file to compatible devices, select Options >

Send. Copyright protection may prevent the sending of

some flash files.

To switch between flash files saved on your device memory or memory card, scroll to the corresponding tabs.

To change the flash file quality, select Options >

Quality when you are playing the flash file. If you select High, the playback of some flash files may appear uneven

and slow due to their original settings. Change the quality setting of such files to Normal or Low for improved playback.

To organise your flash files, select Options > Organise.

Visual radio

Select Menu > Media > Radio. The quality of the radio broadcast depends on the

coverage of the radio station in that particular area.

The FM radio depends on an antenna other than the wireless device antenna. Attach a compatible headset or enhancement to the device for the FM radio to function properly.

Listen to the radio

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To search for a station, select frequency manually, select Options > Manual tuning.

To view available stations based on location, select

Options > Station directory (network service).

To save the current station to your station list, select

Options > Save station.

To select a previously saved radio station, select

To adjust the volume, use the volume keys.

To switch from headset use to listening to the radio through the loudspeaker, select Options > Activate

loudspeaker.

To return to the standby mode and leave the FM radio playing in the background, select Options > Play in

background.

or . To set the

View visual content

To check availability and costs, and to subscribe to the service, contact your service provider.

Before you can view visual content, you must have an internet access point defined at Menu > Tools >

Settings > Connection > Access points.

1. To view available visual content for a tuned station,

select Options > Start visual service. If the visual radio service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).

2. Select the location nearest to you from the station directory. If your device finds a station that matches the tuned frequency, its visual service ID is displayed. To view the visual content, select OK.

Saved stations

To open the list of your saved stations, select Options >

Stations.

To listen to a saved station, select Options > Station >

Listen.

To view available visual content for a station with the Visual Radio service, select Options > Station > Start

visual service.

To change the station details, select Options > Station >

Edit.

Visual Radio settings

Select Options > Settings and from the following:

• Start-up tone — Select whether a tone is played when

the application is started.

• Auto-start service — Select Yes to have the Visual

Radio service start automatically when you select a saved station that offers the Visual Radio service.

• Access point — Select the access point used for the

data connection. You do not need an access point to use the application as an ordinary FM radio.

• Current region — Select the region you are currently

located in. This setting is displayed only if there was no network coverage when the application was started.

Push to talk

Select Menu > Connectivity > PTT. Push to talk (PTT) (network service) provides direct voice

communication connected with the push of a key. With PTT, you can use your device as a walkie-talkie.

You can use PTT to have a conversation with one person or with a group of people, or join a channel. A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other users; the users just join the channel and start speaking with each other.

In PTT communication, one person talks while the other users listen through the built-in loudspeaker. Users take turns responding to each other. Because only one user can talk at a time, the maximum duration of a speech turn is limited. For details of the speech turn duration for your network, contact your service provider.

PTT settings

Select Options > Settings and select User settings to define your preferences for PTT, or Connection settings to change the connection details. Contact your service provider for the correct settings.

Tip: You may also receive the settings in a message from the provider of the PTT service.

Log in to PTT service

If you have set Application start-up on in User

settings, PTT automatically logs in to the service when

started. If not, you must log in manually. To log in to the PTT service manually, select Options >

Switch PTT on.

When the Ringing type setting of your device is set to

Beep once or Silent, or there is an ongoing phone call,

you cannot make or receive PTT calls.

Make a PTT call

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume may be extremely loud.

To make a PTT call, select Options > PTT contacts, select one or several contacts from the list, and press the voice key. Remember to hold the device in front of you during the call so you can see the display. The display informs you when it is your turn to speak. Speak towards the

microphone, and do not cover the loudspeaker with your

hands. Press and hold the voice key the entire time you are talking. When you have finished talking, release the key.

To end the PTT call, press the end key.

When you receive a PTT call, press the call key to answer the call or the end key to dismiss the call.

Created PTT calls

Select Options > PTT log > Created calls, and a call. To make a PTT call to a contact, select Options > Talk 1

to 1.

To send a request to a contact to call you, select Options >

Send callback request.

To create a contact, select Options > Add to Contacts.

Manage PTT contacts

To view, add, modify, delete, or call contacts, select

Options > PTT contacts. A list of names from the

Contacts application is displayed with information about their login status.

To call a selected contact, select Options > Talk 1 to 1.

To make a group call, select several contacts and

Options > Make PTT group call.

To send the contact a request to call you, select Options >

Send callback request.

To answer a callback request, select Show to open the callback request. To make a PTT call to the sender, press the voice key.

Create a PTT channel

To create a channel, select Options > New channel >

Create new.

To register the channel to the PTT service, select

Options > Register.

To join a channel, select the channel you want to talk to, and press the voice key.

To invite a user to a channel, select Options > Send

invitation.

To view the currently active users of a channel, select

Options > Active members.

To view more information about a selected user, select

Options > Contact details.

When you log in to PTT, you are automatically connected to the channels that were active when the application was last closed.

Exit PTT

To exit PTT, select Options > Exit. Select Yes to log out and close the service. Select No if you want to keep the application active in the background.

About GPS and satellite signals

The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the

satellites. To use GPS, you need a compatible GPS receiver. Use Bluetooth connectivity to connect to the GPS receiver. To start using a compatible GPS receiver with Bluetooth connectivity, select Connectivity > Bluetooth.

A GPS terminal receives low-power radio signals from the satellites and measures the travel time of the signals. From the travel time, the GPS receiver can calculate its location to the accuracy of metres.

The coordinates in the GPS are expressed in degrees and decimal degrees format using the international WGS-84 coordinate system.

The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals.

Any GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver and cellular radio networks for positioning or navigation.

To enable or disable different positioning methods, such as Bluetooth GPS, select Menu > Tools > Settings >

General > Positioning > Positioning methods.

About satellite signals

If your device cannot find the satellite signal, consider the following:

• If you are indoors, go outdoors to receive a better signal.

• If you are outdoors, move to a more open space.

• If the weather conditions are bad, the signal strength

may be affected.

• Establishing a GPS connection may take from a couple of seconds to several minutes.

Satellite status

To check how many satellites your device has found, and whether your device is receiving satellite signals, select

Menu > Tools > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar

for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal. When your device has received enough data from the satellite signal to calculate the coordinates of your location, the bar turns black.

Initially your device must receive signals from at least four satellites to be able to calculate the coordinates of your location. When the initial calculation has been made, it may be possible to continue calculating the coordinates of your location with three satellites. However, the accuracy is generally better when more satellites are found.

Positioning settings

Select Menu > Tools > Settings > General >

Positioning.

To use a specific positioning method to detect the location of your device, select Positioning methods.

To select a positioning server, select Positioning server.

Nokia Maps

Select Menu > Tools > Maps. With Maps, you can see your current location on the map,

browse maps for different cities and countries, search for addresses and different points of interest, plan routes from one location to another, and save locations as landmarks and send them to compatible devices.

You can also purchase extra services, such as guides and a turn-by-turn navigation service with voice guidance.

When you use Maps for the first time, you may need to define an internet access point for downloading map information for your current location. To change the access point later, select Options > Settings >

Network > Default access point.

Download maps

When you browse the map on the display, for example, move to another country, a new map is downloaded automatically. These downloaded maps are free of charge, but downloading may involve the transmission of large amounts of data through your service provider's network. For more information on data transmission charges, contact your service provider.

You can view the amount of transferred data from the data counter (kB) shown on the display. The counter shows the

amount of network traffic when you browse maps, create routes, or search for locations online.

Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography provided for use in this device.

To prevent the device from automatically downloading maps through the internet, for example, when you are outside your home cellular network, select Options >

Settings > Network > Use network > Off.

To receive a note when your device registers to a network outside your home cellular network, select Options >

Settings > Network > Roaming warning > On.

Contact your network service provider for details and roaming costs.

To adjust the size of the cache that is used for saving maps or voice guidance files, select Options > Settings >

Network > Max. memory card use (%). This option is

available only when a compatible memory card is inserted. When the memory is full, the oldest map data is deleted. The cache cannot be emptied.

Nokia Map Loader

Nokia Map Loader is PC software that you can use to download and install maps for different countries from the internet to your device or a compatible memory card. You can also use it to download voice files for turn-by-turn navigation.

To use Nokia Map Loader, download it from www.nokia.com/maps, and install it to a compatible PC.

You must use Nokia Maps before using Nokia Map Loader. Nokia Map Loader uses the Maps history information to check the version of map data to be downloaded.

1. To download maps or voice guidance files with Nokia Map Loader, connect your device to the PC with a compatible USB data cable.

2. Open Nokia Map Loader in your PC. Nokia Map Loader checks the version of map data to be downloaded.

3. Select the maps or voice guidance files you want to install to your device.

Satellite information

The indicator is shown on the display when you browse maps. When the device tries to establish a GPS connection, the circles are yellow and the icon is blinking. When the device receives enough data from the satellites to calculate the coordinates of your current location, the icon stops blinking and turns green.

To check how many satellites your device found and whether your device is receiving satellite signals from the satellites, select Options > Map options > Satellite

info.

If your device found satellites, a bar is shown for each satellite in the satellite information view. The longer the bar, the stronger the satellite signal. When your device has received enough data from the satellite signal to calculate the coordinates of your location, the bar turns black.

Browse maps

The map coverage varies by country. When you open the Maps application, Maps zooms in to

the location that was saved from your last session. If no position was saved from the last session, the Maps application zooms in to the capital city of the country you are in based on the information the device receives from the cellular network. At the same time, the map of the location is downloaded, if it has not been downloaded during previous sessions.

To establish a GPS connection and zoom in to your current location, select Options > Find place > GPS position

[0]. Your current location is indicated on the map with

To move on the map, scroll up, down, left, or right.

To zoom in or out, press * or #.

To switch between the 2-D and 3-D views, select

Options > Map options > 2D/3D.

To find a location, select Options > Find place.

To use a location on the map, for example, as a starting point for a nearby search, to plan a route, view its details, or start navigation (extra service), press the scroll key, and select the desired option.

To define what kinds of points of interest are shown on the map, select Options > Map options > Categories.

To take a screen shot of your location, select Save > As

image. The screen shot is saved in Gallery.

To save a location as a landmark, press the scroll key and

select Save > As landmark.

To view saved landmarks, select Options > Find place >

Landmarks.

To send a landmark to a compatible device, press the scroll key, and select Send. If you send the landmark in a text message, the information is converted to plain text.

To adjust the network, routing, and general settings, select Options > Settings.

Find a place

To view points of interest near your current location or other locations on the map, select Options > Find

place > Nearby and a category.

To search for a point of interest by name, select Options >

Find place > Keyword search, or start entering the first

letters of the name, and select Find.

To search for a location by address, select Options > Find

place > By address. You must enter the city and country.

To use an address you have saved to a contact card in Contacts, select Options > Find place > By address >

Options > Select from contacts.

To view the search result on the map, press the scroll key, and select Show on map.

To view a list of your previous locations, select Options >

Find place > Recent.

Plan a route

1. Scroll to a point on the map, press the scroll key, and

select Route from.

2. Scroll to Select, and select Options > Select. To adjust

the routing settings, such as the mode of transportation, select Options > Settings >

Routing.

3. To select the destination, scroll to To, and select

Options > Select.

4. To view the route itinerary, select Options > Show

route. The route is calculated using the selected

routing settings.

To view the itinerary route on the map, select Options >

Show on map.

To run a simulation of the route, select Options > Start

simulation.

Navigation

To purchase a navigation service with voice guidance to use in Maps, select Options > Extra services > Add

navigation.

The licence you purchase is device-specific and cannot be transferred from your device to another device. After purchasing the navigation upgrade, the service is available through Maps.

When you use navigation for the first time, you are prompted to select the language of the voice guidance and download the voice guidance files of the selected language. To change the language later, select Options >

Settings > General > Voice guidance.

To navigate to a destination using voice guidance, create a route in Maps, and select Options > Start navigation. You can also start navigation by selecting any location on the map or in a results list, and Navigate to.

To discard the created route and use another route, select

Options > Alternative route.

To view only the next turns and hide the map, select

Options > Map options > Next turns.

To stop navigation, select Options > Stop navigation.

Guides

To purchase and download guides, select Options >

Extra services > Guides. The guides provide information

about attractions, restaurants, hotels, and other points of interest. The guides must be downloaded and purchased before use. The licence you purchase is device-specific and cannot be transferred from your device to another device.

To download a new guide to your device, scroll to the nearest guides or all guides tab, select the desired guide, and OK. The purchase process starts automatically. You can pay for the guides through a credit card or have the amount charged to your phone bill, if supported by your cellular network service provider.

To confirm the purchase, select OK twice. To receive a confirmation of the purchase through e-mail, enter your name and e-mail address, and select OK.

To browse a downloaded guide, scroll to the my guides tab, select a guide and a subcategory, if available.

GPS data

Select Menu > Tools > GPS data. With GPS data, you can view your current location, find

your way to a desired location, and track distance.

Select Navigation to view navigat ing i nform atio n to yo ur trip destination, Position to view positioning information about your current location, or Trip dist. to view your travelling information such as the distance and duration you have travelled, and your average and maximum speeds.

The application must receive positioning information from at least three satellites to be used as a travelling aid.

The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals.

Use GPS data

To check the signal strength of the satellites that provide the positioning information necessary for navigation, open any of the three views and select Options >

Satellite status.

To set a landmark or location as the destination of your trip, select Navigation > Options > Set destination. You can also enter the destination latitude and longitude coordinates.

To remove the destination set for your trip, select

Navigation > Options > Stop navigation.

To save your current position as a landmark, select

Navigation or Position, and Options > Save position.

To activate the trip meter, select Trip dist. > Options >

Start. To stop the trip meter, select Options > Stop.

To reset all fields and start calculating the trip again, select

Trip dist. > Options > Restart.

To change the measuring system in use, select Options >

Settings > Measurement system > Metric or Imperial.

To enter the altitude calibration to correct the altitude received from the positioning satellites, select Options >

Settings > Altitude calibration.

Landmarks

Select Menu > Tools > Landmarks. Landmarks are coordinates to geographic locations that

you can save to your device for later use in different location-based services. You can create landmarks using a Bluetooth GPS accessory or network (network service).

Create a landmark

To create a landmark, select Options > New landmark. Select Current position to make a network request for the latitude and longitude coordinates of your current location, Use map to select the location from a map, or

Enter manually to fill in necessary location information

such as a name, category, address, latitude, longitude, and altitude.

To show the landmark on the map, select Options >

Show on map.

Edit landmarks

To edit a landmark, select Options > Edit > Options and from the following:

• Select categories — Organise the landmark to a group

of similar landmarks. Select a category to modify landmark information such as a name, category, address, latitude, longitude, and altitude.

• Retrieve current position — Request and

automatically fill in the geographical latitude and longitude coordinates to make a landmark of your current location.

• Delete — Remove the landmark.

• Landmark icon — Change the icon of the landmark.

• Show on map — Show the landmark on the map.

• Send — Send the landmark to compatible devices.

• Editing options — Edit the phone numbers and URL

addresses assigned to the landmark.

• Writing language — Change the writing language.

Landmark categories

You can see the landmark categories in two views: one lists categories that already contain landmarks, and the other lists all the categories your device has.

To view the landmarks that a category contains, scroll to the category, and press the scroll key.

To create a new category, select Options > Edit

categories > Options > New category.

To move a landmark from one category to another, open the landmarks tab, select the landmark, and Options >

Add to category. Select the old category to remove the

mark next to it. Select the category or categories to which you want to add the landmark. Select Accept.

Receive landmarks

Select Menu > Messaging. Open a message that contains a landmark you have

received from another device. Scroll to the landmark, and press the scroll key.

To save the landmark in your device, select Options >

Save.

To forward the landmark to compatible devices, select

Options > Send.

To show the received landmark on the map, select

Options > Show on map.

To find out how to navigate to the received landmark, select Options > Show route.

Connectivity

Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer.

Fast downloading

High-speed downlink packet access (HSDPA, also called

3.5G, indicated by networks and provides high-speed data downloads. When HSDPA support in the device is activated and the device is connected to a UMTS network that supports HSDPA, downloading data such as messages, e-mail, and browser pages through the cellular network may be faster. An active HSDPA connection is indicated by vary between regions.

You can activate or deactivate support for HSDPA in the device settings.

For availability and subscription to data connection services, contact your service provider.

HSDPA only affects the download speed; sending data to the network, such as messages and e-mail, is not affected.

) is a network service in UMTS

. The icon may

Nokia PC Suite

You can install Nokia PC Suite from the CD-ROM or from the web. Nokia PC Suite can be used with Windows 2000, Windows XP, and Windows Vista. With Nokia PC Suite, you can make backups, synchronise your device with a compatible computer, move files between your device and a compatible computer, or use your device as a modem.

For more information about Nokia PC Suite, see the Nokia PC Suite guide.

Data cable

Select Menu > Connectivity > USB. Using a USB data cable, you can connect your device to a

compatible computer. Install Nokia PC Suite to your computer before you use a cable connection, as Nokia PC Suite automatically installs the USB data cable driver to your computer. You can use the Data transfer mode without installing the USB data cable drivers.

Connect the cable to the USB connector of the device.

To change the USB mode you normally use with the data cable, select USB mode > PC Suite or Data transfer.

To set the device to ask for the mode each time you connect the USB data cable to the device, select Ask on

connection > Yes.

Transfer data from a computer

1. Make sure that you have selected USB as a connection type in the Manage connections settings in Nokia PC Suite.

2. Insert a memory card to your device and connect the device to a compatible computer with the USB data cable.

3. When the device asks which mode is used, select Data

transfer. In this mode, you can see your device as a

removable hard drive in your computer.

4. End the connection from the computer (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid damaging the memory card.

Infrared

Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.

Use infrared to connect two devices and transfer data between them. With infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device.

1. Ensure that the infrared ports of the devices face each other. The positioning of the devices is more important than the angle or distance.

2. Select Menu > Connectivity > Infrared to switc h on infrared on your device.

3. Switch on infrared on the other device and wait a few seconds until the infrared connection is established.

4. Locate the desired file in an application or File manager, and select Options > Send > Via

infrared.

If the data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.

All items received through infrared are placed in the Inbox folder in Messaging.

Positioning the devices away from each other breaks the connection, but the infrared light beam remains active on your device until it deactivates.

Bluetooth

Select Menu > Connectivity > Bluetooth.

About Bluetooth

Bluetooth technology enables wireless connections between electronic devices within a range of 10 metres (33 feet). A Bluetooth connection can be used to send images, videos, text, business cards, calendar notes, or to connect wirelessly to devices that use Bluetooth technology.

Since devices using Bluetooth technology communicate using radio waves, your device and the other devices do not n eed t o be in di rect lin e-of-si ght. The two devi ces o nly need to be within a maximum of 10 metres of each other, although the connection can be subject to interference

from obstructions such as walls or other electronic devices.

Several Bluetooth connections can be active at a time. For example, if your device is connected to a headset, you can also transfer files to another compatible device at the same time.

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Dial-up Networking Profile, Object Push Profile, File Transfer Profile, Handsfree Profile, Headset Profile, Basic Imaging Profile, SIM Access Profile, Generic Object Exchange Profile, Generic Access Profile, Generic Audio/Video Distribution Profile, Advanced Audio Distribution Profile, and Audio/ Video Remote Control Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Send and receive data with Bluetooth

1. When you activate Bluetooth for the first time, you are

asked to give a name to your device. Give your device

a unique name to make it easy to recognise if there are several Bluetooth devices in the vicinity.

2. Select Bluetooth > On.

3. Select My phone's visibility > Shown to all or

Define period. If you select Define period, you need

to define the time during which your device is visible to others. Your device and the name you entered can now be seen by other users with devices using Bluetooth technology.

4. Open the application where the item you want to send is stored.

5. Select the item, and select Options > Send > Via

Bluetooth. The device searches for other devices using

Bluetooth technology within range and lists them.

Tip: If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices.

6. Select the device with which you want to connect. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode.

When the connection has been established, Sending

data is shown.

The Sent folder in the Messaging application does not store messages sent using Bluetooth connectivity.

To receive data using Bluetooth, select Bluetooth > On and My phone's visibility > Shown to all to receive data from a non-paired device or Hidden to receive data from a paired device only. When you receive data through Bluetooth, a tone sounds, and you are asked if you want to accept the message in which the data is included. If you

accept, the message is placed in the Inbox folder in the Messaging application.

Tip: You can access the files in the device or on the memory card using a compatible accessory that supports the File Transfer Profile Client service (for example, a laptop computer).

A Bluetooth connection is disconnected automatically after sending or receiving data. Only Nokia PC Suite and some enhancements such as headsets may maintain a connection even if not actively used.

Pair devices

Open the paired devices tab. Before pairing, create your own passcode (1-16 digits),

and agree with the user of the other device to use the same code. Devices that do not have a user interface have a fixed passcode. You need the passcode only when you connect the devices for the first time. After pairing, it is possible to authorise the connection. Pairing and authorising the connection makes connecting quicker and easier, as you do not have to accept the connection between paired devices every time you establish a connection.

The passcode for remote SIM access must have 16 digits.

1. Select Options > New paired device. The device

starts to search for Bluetooth devices within range. If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices.

2. Select the device with which you want to pair, and enter the passcode. The same passcode must be entered to the other device as well.

3. Select Yes to make the connection between your device and the other device automatic, or No to confirm the connection manually every time a connection attempt is made. After pairing, the device is saved to the paired devices page.

To give a nickname to the paired device, select Options >

Assign short name. The nickname is only displayed in

your device.

To delete a pairing, select the device whose pairing you want to delete and Options > Delete. To delete all pairings, select Options > Delete all. If you are currently connected to a device and cancel the pairing with that device, pairing is removed immediately, and the connection is ended.

To allow a paired device to connect automatically to your device, select Set as authorised. Connections between your device and the other device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible headset or computer, or devices that belong to someone you trust. If you want to accept connection requests from the other device separately every time, select Set as unauthorised.

To use a Bluetooth audio enhancement such as a Bluetooth handsfree or headset, you need to pair your device with the enhancement. See the enhancement user guide for the passcode and further instructions. To connect to the audio enhancement, switch on the enhancement. Some audio enhancements connect automatically to your device. Otherwise open the paired devices tab, scroll to the enhancement, and select

Options > Connect to audio device.

Security tips

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility > Hidden.

Do not pair with an unknown device.

SIM access profile

With the SIM access profile, you can access the SIM card of your device from a compatible car kit device. This way, you do not need a separate SIM card to access SIM card data and connect to the GSM network.

To use the SIM access profile, you need the following:

• Compatible car kit device that supports Bluetooth wireless technology

• Valid SIM card in your device

When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first.

For more information about car kit devices and compatibility with your device, see the Nokia web site and your car kit user guide.

Use the SIM access profile

1. Select Menu > Connectivity > Bluetooth >

Remote SIM mode > On.

2. Activate Bluetooth in the car kit.

3. Use your car kit to start a search for compatible devices. For instructions, see the user guide of your car kit.

4. Select your device from the list of compatible devices.

5. To pair the devices, enter the Bluetooth passcode shown on the display of the car kit to your device.

Tip: If you have already accessed the SIM card from the car kit with the active user profile, the car kit searches automatically for a device with the SIM card. If it finds your device, and automatic authorisation is activated, the car kit automatically connects to the GSM network when you switch on the car ignition.

When you activate the remote SIM access profile, you can use applications on your device that do not need network or SIM services.

To make connections between your device and the car kit without separate acceptance or authorisation, select

Menu > Connectivity > Bluetooth, and open the paired

devices tab. Scroll to the car kit, press the scroll key, and enter the Bluetooth passcode. When the device asks to make the connection automatic, select Yes. If you select

No, connection requests from this car kit must be accepted

separately every time.

To end the remote SIM access connection from your device, select Menu > Connectivity > Bluetooth > Remote

SIM mode > Off.

Wireless LAN

Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.

Your device can detect and connect to a wireless local area network (WLAN). To use WLAN, a network must be available in the location and your device must be connected to it.

WLAN connections

that belong to the same network, your device can stay connected to the network.

Tip: To check the unique media access control (MAC) address that identifies your device, for example to configure the MAC address of your device to a WLAN router, enter *#62209526# on the device keypad. The MAC address is shown on the device display.

Important: Always enable one of the available

encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorized access to your data.

To use WLAN, you must create an internet access point in a WLAN. Use the access point for applications that need to connect to the internet. A WLAN connection is established when you create a data connection using a WLAN access point. The active WLAN connection is ended when you end the data connection. You can also end the connection manually.

You can use WLAN during a voice call or when packet data is active. You can only be connected to one WLAN access point device at a time, but several applications can use the same internet access point.

When the device is in the Offline profile, you can still use WLAN, if available. Remember to comply with any applicable safety requirements when establishing and using a WLAN connection.

If you move the device to another location within the WLAN and out of range of a WLAN access point, the roaming functionality can automatically connect your device to another access point that belongs to the same WLAN. As long as you remain within range of access points

See "Connection manager", p. 97.

See WLAN availability

To have your device show WLAN availability, select

Menu > Tools > Settings > Connection > Wireless LAN > Show WLAN availability.

If WLAN is available,

Tip: You can also scan for networks in range.

is shown on the display.

WLAN wizard

Select Menu > Connectivity > WLAN wiz.. The WLAN wizard helps you find and connect to a wireless

LAN. When you open the application, your device starts to scan for available WLANs and lists them.

To update the list of available WLANs, select Options >

Refresh.

To start or continue browsing the web using the access point of the WLAN, scroll to the desired network, and select

Options > Start Web browsing or Cont. Web browsing.

To disconnect the active connection to the WLAN, select

Options > Disconnect WLAN.

To view the details of the WLAN, select Options >

Details.

To save the access point of the WLAN, select Options >

Define access point.

Always enable one of the available encryption methods to increase the security of your WLAN connection. Using encryption reduces the risk of unauthorised access to your data.

Use the wizard in the active standby mode

In the active standby mode, the WLAN wizard shows the status of your WLAN connections and network searches. To view the available options, scroll to the row showing the status, and press the scroll key. Depending on the status, you can start the Web browser using a WLAN connection, disconnect from a WLAN, search for WLANs, or set the network scanning on or off.

If WLAN scanning is off and you are not connected to any WLAN, WLAN scanning off is displayed in the active standby mode. To set scanning on and search for available WLANs, scroll to the row showing the status, and press the scroll key.

To start a search for available WLANs, scroll to the row showing the status, press the scroll key, and select Search for

WLAN. To set WLAN scanning

off, scroll to the row showing the status, press the scroll key, and select Switch WLAN scan

off.

When Start Web browsing is selected, the WLAN wizard automatically creates an access point for the selected WLAN. The access point can also be used with other applications requiring WLAN connection.

If you select a secured WLAN, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct service set identifier (SSID).

Internet access points

An internet access point is a collection of settings, which define how the device creates a data connection to the network. To use e-mail and multimedia services or to browse web pages, you must first define access points for these services.

Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or remove them.

Set up an internet access point for packet data (GPRS)

1. Select Menu > Tools > Settings > Connection >

Access points.

2. Select Options > New access point to create a new

access point, or select an existing access point from the list and then Options > Duplicate access point to use the access point as a basis for the new one.

3. Define the following settings.

• Connection name — Enter a descriptive name for

the connection.

• Data bearer — Select Packet data.

• Access point name — Enter the name for the access

point. The name is usually provided by your service provider.

• User name — Enter your user name if required by

the service provider. User names are often casesensitive and provided by your service provider.

• Prompt password — Select Yes to enter your password each time you log into a server or No to save the password in your device memory and automate the login.

• Password — Enter your password if required by the service provider. The password is often casesensitive and provided by the service provider.

• Authentication — Select Secure to send your password always encrypted, or Normal to send your password encrypted when possible.

• Homepage — Enter the web address of the page you want to display as the home page when you use this access point.

4. After defining the settings, select Options >

Advanced settings to define the advanced settings or Back to save the settings and exit.

Advanced internet access point settings for packet data (GPRS)

Select Menu > Tools > Settings > Connection >

Access points.

After setting up a basic internet access point for packet data (GPRS), select Options > Advanced settings, and define the following advanced settings:

• Network type — Select IPv4 or IPv6 as the internet

protocol type. The internet protocol defines how data is transferred to and from your device.

• Phone IP address — Enter the IP address of your device. Select Automatic to have the network provide the device IP address. This setting is shown only if you select Network type > IPv4.

• DNS address — Select Primary DNS address and

Secondary DNS address and enter their IP addresses,

if required by your service provider. Otherwise, the name server addresses are provided automatically.

• Proxy server address — Enter the address of the proxy server. Proxy servers are intermediate servers used by some service providers between a browsing service and its users. These servers may provide additional security and speed up access to the service.

Set up an access point for WLAN manually

1. Select Menu > Tools > Settings > Connection >

Access points.

2. Select Options > New access point to create a new

access point, or select an existing access point from the list and then Options > Duplicate access point to use the access point as a basis for the new one.

3. Define the following settings.

• Connection name — Enter a descriptive name for

the connection.

• Data bearer — Select Wireless LAN.

• WLAN network name — To enter the service set

identifier (SSID), that is, the name that identifies the specific WLAN, select Enter manually. To select the network from the WLANs in range, select Search for

networks.

• Network status — Select Hidden if the network you are connecting to is hidden or Public if it is not hidden.

• WLAN network mode — If you select

Infrastructure, devices can communicate with

each other and with wired LAN devices through a WLAN access point. If you select Ad-hoc, devices can send and receive data directly with each other, and no WLAN access point is needed.

• WLAN security mode — You must select the same

se cu ri ty m od e t ha t is us ed in the WLAN access point. If you select WEP (wired equivalent privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected access), you must

also configure the relevant additional settings. See the device help for more information.

• WLAN security settings — Edit the security

settings for the selected security mode.

• Homepage — Enter the web address of the page

you want to display as the home page when you use this access point.

To set up a WLAN access point automatically, use the WLAN wizard. Select Menu > Connectivity > WLAN wiz..

Advanced access point settings for WLAN

Select Menu > Tools > Settings > Connection >

Access points.

After setting up a basic access point for WLAN, select

Options > Advanced settings, and define the following

advanced settings:

• IPv4 settings — Enter the device IP and name server

addresses for the IPv4 internet protocol.

• IPv6 settings — Select or enter the name server

addresses for the IPv6 internet protocol.

• Ad-hoc channel — The channel is usually chosen

automatically. To enter the channel number (1-11) manually, select User defined.

• Proxy server address — Enter the proxy server

address.

• Proxy port number — Enter the proxy server port

number.

Modem

Select Menu > Connectivity > Modem.

Together with a compatible computer, you can use your device as a modem to connect to the web, for example.

Before you can use your device as a modem

• You need an appropriate data communications software on your computer, such as Nokia PC Suite. For more information, see the Nokia PC Suite guide.

• You must subscribe to the appropriate network services from your service provider or internet service provider.

• You must have the appropriate drivers installed on your computer. You must install drivers for the cable connection, and you may need to install or update Bluetooth or infrared drivers.

To connect the device to a compatible computer using infrared, press the scroll key. Make sure the infrared ports of the device and computer are directly facing each other with no obstacles between them.

To connect your device to a computer using Bluetooth wireless technology, initiate the connection from the computer. To activate Bluetooth in your device, select

Menu > Connectivity > Bluetooth and select Bluetooth > On.

If you use a cable to connect your device to a computer, initiate the connection from the computer.

You may not be able to use some of the other communication features when the device is used as a modem.

Connection manager

Select Menu > Connectivity > Conn. mgr..

View and end active connections

To see the open data connections, select Active data

connections.

To view detailed information about network connections, select a connection from the list and Options > Details. The type of information shown depends on the connection type.

To end the selected network connection, select Options >

Disconnect.

To end all active network connections simultaneously, select Options > Disconnect all.

Search for WLAN

To search for WLANs available within range, select

Available WLAN networks. The available WLANs are

listed with their network mode (infrastructure or ad-hoc), signal strength, and network encryption indicators, and whether your device has an active connection with the network.

To view the details of a network, scroll to it, and press the scroll key.

To create an internet access point for a network, select

Options > Define access point.

Security and data management

Manage the data and software on your device, and take care of the security of the device and its contents.

Important: Your device can only support one

antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning.

Lock the device

Important: If the device has been locked, enter the

To prevent access to the contents of your device, lock the device in the standby mode. Press the power key, select

Lock phone, and enter your lock code. The default lock

code is 12345. To unlock, press the left selection key, enter your lock code, and press the scroll key.

To change the lock code, select Menu > Tools >

Settings > General > Security > Phone and SIM card > Lock code. Enter the old code and then the new

code twice. The new code can be 4-255 characters long. Both alphabets and digits can be used, and both uppercase and lowercase alphabets are possible.

You can also lock the device remotely by sending a text message to the device. To enable remote locking and to define the text for the message, select Menu > Tools >

Settings > General > Security > Phone and SIM card > Allow remote lock > Yes. Enter the remote lock

message and confirm the message. The message must be at least 5 characters long.

Memory card security

Select Menu > Tools > Memory.

You can protect a memory card with a password to prevent unauthorised access. To set a password, select Options >

Set password. The password can be up to 8 characters

long and is case-sensitive. The password is stored in your device. You do not need to enter it again while you use the memory card on the same device. If you use the memory card on another device, you are asked for the password. Not all memory cards support password protection.

To remove the memory card password, select Options >

Remove password. When you remove the password, the

data on the memory card is not protected against unauthorised use.

To open a locked memory card, select Options > Unlock

memory card. Enter the password.

If you cannot recall the password to unlock a locked memory card, you may reformat the card, in which case the card is unlocked and password removed. Formatting a memory card destroys all data stored on the card.

Fixed dialling

Select Menu > Contacts > Options > SIM contacts >

Fixed dial contacts.

With the fixed dialling service, you can restrict calls from your device to certain phone numbers. Not all SIM cards support the fixed dialling service. Contact your service provider for more information.

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

1. To restrict calls from your device, select Options >

New SIM contact and enter the contact name and

phone number to the list of numbers to which calls are allowed, or select Add from Contacts to copy the contact from Contacts. To restrict calls by a country prefix, enter the country prefix in the list of numbers. All phone numbers to which calls are allowed must start with this country prefix.

2. Select Options > Activate fixed dialling. You need

your PIN2 code to activate and deactivate fixed dialling

or edit your fixed dialling contacts. Contact your service provider if you do not have the code. To cancel the service, select Options > Deactivate fixed dialling.

Tip: To send text messages to the SIM contacts while the fixed dialling service is active, you need to add the text message centre number to the fixed dialling list.

Certificate manager

Select Menu > Tools > Settings > General >

Security > Certificate management.

Digital certificates are used to verify the origins of software but do not guarantee safety. There are three different types of certificates: authority certificates, personal certificates, and server certificates. During a secure connection, a server may send a server certificate to your device. Upon receipt, it is checked through an authority certificate stored on your device. You receive notification if the identity of the server is not authentic or if you do not have the correct certificate in your device.

Download a certificate from a web site, or receive a certificate as an e-mail attachment, or as a message sent through a Bluetooth or infrared connection. Certificates should be used when you connect to an online bank or a remote server to transfer confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software, and to check the authenticity of software when you download and install software to your device.

Tip: When you add a new certificate, check its authenticity.

View certificate details

You can only be sure of the correct identity of a server when the signature and the validity period of a server certificate have been checked.

To view certificate details, select View details. One of the following notes may appear:

• Certificate not trusted — You have not set any

application to use the certificate. You may want to change the trust settings.

• Expired certificate — The period of validity has ended

for the selected certificate.

• Certificate not valid yet — The period of validity has

not yet begun for the selected certificate.

• Certificate corrupted — The certificate cannot be

used. Contact the certificate issuer.

Certificate trust settings

Trusting a certificate means that you authorise it to verify web pages, e-mail servers, software packages, and other data. Only trusted certificates can be used to verify services and software.

Important: Even if the use of certificates makes the

risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If

100

"Expired certificate" or "Certificate not valid yet" is shown,

even if the certificate should be valid, check that the current date and time in your device are correct.

To change the trust settings, select a certificate and

Options > Trust settings. Select an application field and

press the scroll key to select Yes or No. You cannot change the trust settings of a personal certificate.

Depending on the certificate, a list of applications that can use the certificate is displayed:

• Symbian installation — New Symbian operating

system application.

• Internet — E-mail and graphics.

• App. installation — New Java™ application.

• Online certif. check — Online certificate status

protocol.

Security modules

Select Menu > Tools > Settings > General >

Security > Security module.

View and edit security modules

To view or edit a security module, scroll to it, and press the scroll key.

To view detailed information about a security module, select Options > Security details.

To edit the PIN codes for the security module, select

Module PIN to edit the PIN code for the security module

or Signing PIN to edit the PIN code for digital signatures.

Nokia E51-1, E51-2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

For your safety

About your device

Network services

Enhancements, batteries, and chargers

Get started

Insert the SIM card and battery

Charge the battery

Keys and parts

Connect the headset

Attach the wrist strap

First start-up

Lock the keys

Display indicators

Nokia support and contact information

Your Nokia E51

Welcome

Settings wizard

Standby modes

Active standby

Standby

Menu

Common actions in several applications

Transfer

Transfer content between devices

View transfer log

Synchronise, retrieve, and send data

Personalisation

Profiles

Select ringing tones

Customise profiles

Change the display theme

Download a theme

3-D ringing tones

Volume control

One-touch keys

Home key

Contacts key

Calendar key

E-mail key

Multitasking

Memory

Free memory

Memory card

MicroSD

Insert the memory card

Use a memory card

Eject the memory card

Write text

Traditional text input

Predictive text input

Change the writing language

Antennas

Further information

Business communications

Telephone

Voice calls

Answer a call

Make a call

Make a conference call

Fax calls

Video calls

Make a video call

Share a video

Receive a video sharing invitation

Net calls

Create a net call profile

Connect to the net call service

Make net calls

Net call service settings

Speed dialling

Call divert

Call barring

Bar net calls

Send DTMF tones

Voice mail