Electronic user's guide released subject to "Nokia User's Guides Terms and Conditions, 7th
June, 1998"
Connectivity Adapter Cable DKU-5
Quick Installation Guide
9354902
Issue 2
Nokia, Nokia Connecting People and Pop-Port are registered trademarks of Nokia Corporation.
1. Introduction
With the Connectivity Adapter Cable DKU-5 you can connect your Nokia phone to
a USB compatible PC for data transfer. You can synchronise data (for example, a
calendar, phone book or a to-do list) between your phone and a compatible
organiser software by using the PC Suite software supplied with the phone.
The Connectivity Adapter Cable DKU-5 is compatible with phones with a PopPort™ interface connector, for example, the Nokia 7210 mobile phone. Please
check the compatibility from your phone's accessory guide. The Connectivity
Adapter Cable driver software is compatible with the Microsoft Windows 98
Second Edition, Windows ME, Windows 2000 and Windows XP operating systems.
Please refer to the user’s guide of your phone for instructions on the phone’s
operation, care and maintenance, including important safety information.
Copyright © 2003 Nokia. All rights reserved.
2
2. Installation
First install the Connectivity Adapter Cable driver software on your computer from
the CD-ROM supplied in the sales package before installation of Nokia PC Suite.
You can download the latest version of Connectivity Adapter Cable driver
software at http://www.nokia.com/enhancements.
Note: Do NOT have your Connectivity Adapter Cable connected to the computer
when you install the driver. Doing so causes the driver to be installed incorrectly.
■ Loading the CD-ROM on your computer
1. Exit all Windows programs and insert the Connectivity Adapter Cable driver
CD-ROM into the CD-ROM drive of your computer.
2. If installation does not start automatically, select "Run.." from the "Start"
menu and type "D:\start.exe" (where "D:\" refers to the CD-ROM drive of the
computer ) and press Enter.
■ Installing the driver
1. Follow the on-screen instructions to start an installation wizard, which guides
you through the setup process of the driver.
2. The installation wizard first tells you that DKU-5 will be installed on your
computer. Click "Next>" to continue.
Copyright
© 2003 Nokia. All rights reserved.
3
3. When the installation has been completed, in some systems the wizard
prompts you to restart your computer. Click "Yes". Note that you must restart
your computer before you can use the program.
4. Remove any disks from their drives, and then click "Finish" to complete the
setup.
Notes for Windows 2000 users
When the cable is connected for the first time, Windows 2000 automatically
locates the drivers and software that you previously installed. If the "Digital
signature not found" message is displayed during the installation process, click
"Yes" to complete the installation.
Notes for Windows XP users
When the cable is connected for the first time, Windows XP activates the "Found
New Hardware Wizard" to assist you with the installation of both the cable
adapter and the virtual COM port. If Windows logo error messages are displayed
during the installation process, click "Continue anyway" to complete the
installation for both devices.
■ Connecting the cable
After you have restarted your computer, connect the DKU-5 cable to the USB port
of your computer and to the Pop-Port connector of the compatible Nokia phone.
See the user’s guides of your Nokia phone and Nokia PC Suite for information on
Data cable usage.
Copyright © 2003 Nokia. All rights reserved.
4
Loading...