View of Standard Test Lead 17. . . . . . . . . . . . . . . . . . . . . . . . .
RPM-1
Service Tools
Page No
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 3
Page 4
RPM-1
Service Tools
Service Adapter JBS-23
The service adapter JBS-23 is used to connect Card phones RPE-1 and
RPM-1 to Nokia DCT3 SW upgrade environment and to enable WinTesla
usage with DAU-9P service cable. Since the card phone concept does not
have a battery as a power supply , a standard Nokia charger for DCT2 products (ACH-6E) is used as a power supply when WinTesla operations are
done DAU-9P cable.
When JBS-23 is used with SW upgrade environment, power must be supplied with standard test leads.
Product Code
Service Adapter JBS-23:0770165
PAMS Technical Documentation
View of JBS-23
Page 4
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 5
PAMS Technical Documentation
Flash Loading Adapter FLA-7
The flash loading adapter FLA-7 is used with JBS-23 and test leads in
CMT SW upgrade. Service cable SCH-5 is also needed. Power is supplied to FLA-7 from ACL-3 charger. Power for the FPS-4 can be connected via FLA-7 by SCF-7 DC power cable. The adapter is connected to
the flash prommer FPS-4S by the AXS-5 cable and to the security box
TDF-4 by the XCM-1 cable.
Previous version of the flash loading adapter, FLA-5, the version without
Communicator power outlet can also be used.
Product Code
Flash Loading Adapter FLA-7:0770119
RPM-1
Service Tools
View of FLA-7
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 5
Page 6
RPM-1
Service Tools
Flash Prommer FPS-4S (Sales Pack)
The flash prommer FPS-4S is used to update the main software of the
phone. Updating is done by first loading the new MCU software from the PC
to the flash prommer , and then loading the new SW from the prommer to the
phone. When updating more than one phone in succession, the MCU software only needs to be loaded to the prommer once.
The sales pack includes:
- Charger ACL-3E0680015
- Printer Cable 0730029
- D9 - D9 Cable AXS-40730090
- Installation software for FPS-40774043
- SW flash device support disk0774228
PAMS Technical Documentation
Note!
Due to hardware changes in RPM–1 product installation software
has been updated to contain RPM–1 specific files. Make sure that you
have newest FPS–4 software before you start setting up SW upgrade
equipment.
Product Code
Flash Prommer FPS-4S:0080178
View of FPS-4S
Page 6
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 7
PAMS Technical Documentation
Security Box TDF-4
The security box TDF-4 is required for updating MCU software, and infra red
testing.
Note: TDF–4 is delivered in de–activated mode.
Fill in the enclosed Activation Request Form, and fax to NMP Salo to get
the activation code.
Product Code
Security Box TDF-4:0770106
View of TDF-4
RPM-1
Service Tools
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 7
Page 8
RPM-1
Service Tools
Service Cable SCH-5A
The service cable SCH-5A is used between the JBS-23 service adapter and
the flash loading adapter FLA-7. The difference between previous SCH-5
and now available SCH-5A is the design of A-version connector which can
be used with 71 10 phone as well. Old SCH-5 cables can be used with JBS-23
if A version is not available.
Product Code
Service Cable SCH-5A:0730166
View of SCH-5A
PAMS Technical Documentation
Page 8
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 9
PAMS Technical Documentation
DC Power Cable SCF-7
The DC power cable SCF-7 is used for connecting power from ACL-3 charger via FLA-7 to FPS-4.
Product Code
DC Power Cable SCF-7:0730141
View of SCF-7
RPM-1
Service Tools
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 9
Page 10
RPM-1
Service Tools
D9-D9 Cable AXS-4
The D9-D9 cable AXS-4 is used to connect two 9 pin D connectors. e.g. between PC and TDF-4 security box.
Product Code
D9 - D9 Cable AXS-4:0730090
View of AXS-4
PAMS Technical Documentation
Page 10
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 11
PAMS Technical Documentation
D15-D15 Cable AXS-5
The D15-D15 cable AXS-5 is used to connect two 15 pin D connectors. e.g.
between FLA-7 and FPS-4S.
Product Code
D15-D15 Cable AXS-5:0730091
View of AXS-5
RPM-1
Service Tools
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 11
Page 12
RPM-1
Service Tools
MBUS Cable DAU-9M
The MBUS cable DAU-9M has a 61**/51**/7110 phone system connector,
and is used between the JBS-23 box and external devices (laptops, PCs).
Only difference between previous version of DAU-9M, the DAU-9P is the
smaller design of DAU-9M connector. Old DAU-9P cables can be used with
JBS-23 if they are availabe.
Product Code
MBUS Cable DAU-9M:0730162
View of DAU-9M
PAMS Technical Documentation
Page 12
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 13
PAMS Technical Documentation
Power ACH-6
ACH–6E charger is used as power supply for the JBS–23, when the
phone is controlled using the DAU–9M cable. Banana cables are not
needed when this setup is used.
There are four variants of ACH-6 DC Power sources available:
ACH–6AAustralia0675086
ACH–6XUK / Hong Kong0675087
RPM-1
Service Tools
Views of ACH-6 variants
ACH–6EACH–6X
ACH–6U
ACH–6A
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 13
Page 14
RPM-1
Service Tools
RF cable XRP-2S
RF cable XRP-2S is used between RPM-1 card phone and RF measurement equipment to perform tuning operations. The standard antenna of
RPM-1 must be removed to connect the RF-cable into the phone.
Product Code
RF Cable XRP-2S:0730176
View of XRP-2S
PAMS Technical Documentation
Page 14
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 15
PAMS Technical Documentation
SW Security Device PKD-1
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC. Without the
dongle present it is not possible to use the service software. Printer or any
such device can be connected to the PC through the dongle if needed.
Caution:Make sure that you have switched off the PC and the printer before making connections!
Caution:Do not connected the PKD-1 to the serial port. Y ou may damage
your PKD-1!
Product Code
SW Security Device PKD-1:0750018
RPM-1
Service Tools
View of SW Security Device
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 15
Page 16
RPM-1
Service Tools
Opening Tool SRT-2
Opening tool SRT-2 is used to remove metal covers without damaging
them. If the RPM-1 is opened using a screwdriver or some other sharp
tool covers will be likely to be damaged and they can not be reused.
Product Code
Opening tool SRT-2:0770209
View of SRT-2
PAMS Technical Documentation
Page 16
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 17
PAMS Technical Documentation
Standard Test Lead, Red and Black
Stackable standard test leads are used to connect JBS-23 to FLA-7. One
black and one red lead is needed.
Product Code
There is no product code for standard test leads. 500 mm long standard
leads with can be ordered in Europe for example from Farnell.
Farnell order code for 500 mm stackable test lead with 4 mm plugs is
523-719 for the red lead and
523-720 for the black lead.
RPM-1
Service Tools
View of Standard Test Lead
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 17
Page 18
RPM-1
Service Tools
PAMS Technical Documentation
This page intentionally left blank.
Page 18
Nokia Mobile Phones Ltd.
Issue 1 12/99
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.