Nokia 6681 User Manual

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-57 is in conformity with the provisions of the following Council Directive: 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/

The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product endof-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.

Copyright © 2005 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.

Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending. Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided ‘as is’. Except as required by a pplicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents o f this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Export Controls This device may contain commodities, technology or software subject to export

laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada

can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

ABOUT ADD-ON APPLICATIONS FOR YOUR NOKIA 6681 In the sales package you will find a Reduced-Size Dual Voltage MultimediaMemoryCard (RS-MMC) that contains additional applications from Nokia and third-party developers. The content of the RS-MMC and the availability

of applications and services may vary by country, retailer and/or network operator. The applications and further information about the use of the applications at www.nokia.com/support are available in selected languages only. Some operations and features are SIM card and/or network dependent, MMS dependent, or dependent on the compatibility of devices and the content formats supported. The availability of services may vary by country and region. Some services are subject to a separate charge.

NO WARRANTY The third party applications provided on the Reduced-size MultimediaMemoryCard (RS-MMC) have been created and are owned by persons or entities that are not

affiliated with or related to Nokia. Nokia does not own the copyrights and/or intellectual property rights to these third party applications. As such, Nokia does not take responsibility for any end user support or the functionality of these third party applications, nor the information presented in the applications or these materials. Nokia does not provide any warranty for these applications.

YOU ACKNOWLEDGE THE SOFTWARE AND/OR APPLICATIONS (COLLECTIVELY, THE "SOFTWARE") ARE PROVIDED "AS IS" WITHOUT WARRANTY O F ANY KIND EXPRESS OR IMPLIED AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. THERE IS NO WARRANTY BY NOKIA OR BY ITS AFFILIATES THAT ANY ASPECT OF THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. YOU ASSUME ALL RESPONSIBILITY AND RISK FOR THE SELECTION OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS AND FOR THE INSTALLATION, USE AND RESULTS OBTAINED FROM IT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NOKIA, ITS EMPLOYEES OR AFFILIATES BE LIABLE FOR ANY LOST PROFITS, REVENUE, SALES, DATA, INFORMATION OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, PROPERTY DAMAGE, PERSONAL INJURY, INTERRUPTION OF BUSINESS, OR FOR ANY DIRECT, INDIRECT, INCIDENTAL, ECONOMIC, COVER, PUNITIVE,

SPECIAL OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY ARISING OUT OF THE INSTALLATION OR USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NOKIA OR ITS AFFILIATES ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME COUNTRIES/ STATES/JURISDICTIONS DO NOT ALLOW THE ABOVE EXCLUSION OR LIMITATION OF LIABILITY, BUT MAY ALLOW LIABILITY TO BE LIMITED, IN SUCH CASES, NOKIA, ITS EMPLOYEES' OR AFFILIATES' LIABILITY SHALL BE LIMITED TO 50 EURO. NOTHING CONTAINED IN THIS DISCLAIMER SHALL PREJUDICE THE STATUTORY RIGHTS OF ANY PARTY DEALING AS A CONSUMER.

NOKIA CORPORATION NOKIA MULTIMEDIA MARKETING P.O. BOX 100, FIN-00045 NOKIA GROUP, FINLAND TEL. +358 7180 08000 TELEFAX +358 7180 34016 WWW.NOKIA.COM

ISSUE 2 EN, 9236904

Contents

For your safety...........................................9

Personalise your phone ...........................12

Set tones................................................................................12

Offline profile ...............................................................13

Transfer content from another phone ..........................13

Change the look of your phone ...................................... 14

Active standby mode..........................................................15

Your phone ...............................................16

Put on the wrist strap........................................................16

Clock.......................................................................................16

Clock settings............................................................... 16

World clock ...................................................................17

Volume and loudspeaker control....................................17

File manager ........................................................................17

View memory consumption......................................18

Memory low—free memory ......................................18

Memory card tool ............................................................... 19

Format a memory card ..............................................19

Make calls ................................................21

Call ..........................................................................................21

Speed dial a phone number......................................21

Make a conference call..............................................22

Answer or reject a call.......................................................22

Call waiting (network service).................................22

Options during a call..................................................23

Log...........................................................................................23

Recent calls ..................................................................23

Call duration................................................................. 23

Packet data ...................................................................24

Monitor all communication events........................ 24

Contacts (Phonebook).............................26

Save names and numbers.................................................26

Default numbers and addresses..............................26

Copy contacts ......................................................................27

SIM directory and other SIM services ................... 27

Add ringing tones for contacts .......................................27

Voice dialling........................................................................28

Add a voice tag............................................................28

Make a call with a voice tag....................................28

Create contact groups.......................................................29

Remove members from a group.............................. 29

Camera and Gallery ................................ 30

Camera ...................................................................................30

Take pictures.................................................................30

Take pictures in a sequence......................................32

You in the picture—self-timer..................................32

The flash.........................................................................32

Adjust colour and lighting ........................................32

Adjust camera settings ..............................................33

Record videos................................................................33

Adjust video recorder settings .................................34

Gallery.....................................................................................35

View images ..................................................................35

Imaging .................................................... 37

Video editor...........................................................................37

Edit video, sound, and transitions...........................37

Image manager ....................................................................38

Image print............................................................................39

Printer selection...........................................................39

Print preview.................................................................39

Print settings.................................................................39

RealPlayer™...........................................................................39

Play video or sound clips...........................................40

Stream content over the air .....................................40

Receive RealPlayer settings ......................................41

Messaging.................................................42

Write text..............................................................................43

Traditional text input .................................................43

Predictive text input—Dictionary............................44

Copy text to clipboard ...............................................45

Write and send messages.................................................46

Receive MMS and e-mail settings..........................47

Inbox—receive messages...................................................48

Multimedia messages.................................................48

Data and settings ........................................................49

Web service messages................................................49

My folders ............................................................................50

Mailbox ..................................................................................50

Open the mailbox........................................................50

Retrieve e-mail messages .........................................50

Delete e-mail messages.............................................51

Disconnect from the mailbox...................................52

Outbox—messages waiting to be sent..........................52

View messages on a SIM card.........................................53

Messaging settings.............................................................53

Text messages...............................................................53

Multimedia messages.................................................54

E-mail .............................................................................55

Web service messages................................................57

Cell broadcast...............................................................57

Contents

Other settings............................................................... 57

Calendar....................................................59

Create calendar entries.....................................................59

Contents

Calendar views............................................................. 60

Set a calendar alarm ..................................................60

Remove calendar entries...........................................60

Calendar settings.........................................................60

Web...........................................................61

Access the Web ...................................................................61

Receive browser settings ..........................................61

Enter the settings manually.....................................61

Bookmarks view...................................................................62

Add bookmarks manually.......................................... 62

Send bookmarks........................................................... 62

Make a connection.............................................................62

Connection security....................................................63

Browse....................................................................................63

View saved pages ........................................................64

Download and purchase items........................................64

End a connection ................................................................65

Empty the cache..........................................................65

Web settings.........................................................................65

Office........................................................67

Recorder.................................................................................67

To-do ......................................................................................67

Create a task list..........................................................67

Calculator..............................................................................67

Calculate percentages................................................67

Notes ......................................................................................68

Converter............................................................................... 68

Set base currency and exchange rates.................. 68

My own.....................................................70

Go to—add shortcuts..........................................................70

Delete a shortcut.........................................................70

Wallet ....................................................................................70

Create a wallet code...................................................71

Store personal card details.......................................71

Create personal notes................................................ 71

Create a wallet profile...............................................72

View ticket details....................................................... 72

Wallet settings.............................................................72

Reset the wallet and wallet code........................... 73

IM—Instant messaging (chat).................74

Receive IM settings ............................................................74

Connect to an IM server ...................................................74

Modify your IM settings.................................................... 74

Search for IM groups and users......................................75

Join and leave an IM group..............................................75

Chat.........................................................................................75

Record chats..................................................................76

View and start conversations...........................................76

IM contacts...........................................................................77

Manage IM groups..............................................................78

Administrate an IM group.................................................78

Create a new IM group..............................................78

Add and remove group members ............................79

Chat server settings............................................................79

Connectivity ............................................ 80

Bluetooth connection.........................................................80

Bluetooth connection settings.................................80

Send data using a Bluetooth connection .............81

Pair devices....................................................................82

Receive data using a Bluetooth connection ........82

Switch off Bluetooth connectivity..........................83

PC connections.....................................................................83

CD-ROM .........................................................................83

Your phone as a modem............................................83

Connection manager..........................................................83

View data connection details...................................84

Remote synchronisation....................................................84

Create a new synchronisation profile....................85

Synchronise data.........................................................85

Device manager...................................................................86

Server profile settings................................................86

Tools..........................................................87

Settings..................................................................................87

Phone settings..............................................................87

Call settings ..................................................................88

Connection settings....................................................89

Date and time...............................................................92

Security ..........................................................................92

Call diverting ................................................................95

Call barring (network service)..................................95

Network..........................................................................96

Enhancements..............................................................96

Voice commands .................................................................96

Add a voice command to an application..............96

Application manager.......................................................... 97

Install applications and software ...........................97

Remove applications and software........................ 98

Application settings.................................................... 99

Activation keys—handle copyright-protected files....99

Troubleshooting .................................... 100

Q&A.......................................................................................100

Contents

Battery information ............................. 103

Charging and discharging...............................................103

Nokia battery authentication guidelines ...................103

Contents

Authenticate hologram ...........................................104

What if your battery is not authentic?...............104

Care and maintenance ......................... 105

Additional safety information............. 106

Index ..................................................... 109

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless phones can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY Use only in the normal position as explained in the product documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES Remember to make backup copies or keep a written record of all important information.

CONNECTING TO OTHER PHONES When

connecting to any other phone, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS Ensure the phone function of the phone is switched on and in service. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.

About your device

The wireless device described in this guide is approved for use on the GSM 900/1800/1900 network. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other

than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

Network services

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilise network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all languagedependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

This wireless device is a 3GPP GSM Release 99 terminal supporting GPRS service, and is designed to support also Release 97 GPRS networks. However, there may be some compatibility issues when used in some Release 97 GPRS networks. For more information, contact your service provider.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail and content downloading using

the browser or over MMS, require network support for these technologies.

Enhancements, batteries, and chargers

Check the model number of any charger before use with this phone. This phone is intended for use when supplied with power from ACP-12 and LCH-12.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Your phone and its enhancements may contain small parts. Keep them out of reach of small children.

Personalise your phone

Note: Your service provider or network operator

may have requested a different order for menu items or the inclusion of different icons in the phone menu. Contact your service provider, network operator, or Nokia Customer Care for assistance with any features that differ from those described in this guide.

• To change the standby mode background image or

Personalise your phone

what is shown in the screen saver, see ‘Change the look of your phone’, p. 14.

• To use the standby display for fast access to your most frequently used applications, see ‘Active standby mode’, p. 15.

• To customise the ringing tones, see ‘Set tones’, p. 12.

• To change the shortcuts assigned for the different presses of the scroll key and selection keys in the standby mode, see ‘Standby mode’, p. 87.

• To change the clock shown in the standby mode, select

Clock > Options > Settings > Clock type > Analogue

or Digital.

• To change the clock alarm tone, select Clock >

Options > Settings > Clock Alarm tone and a tone.

• To change the calendar alarm tone, select Calendar >

Options > Settings > Calendar alarm tone.

• To change the welcome note to an image or text, select

Tools > Settings > Phone > General > Welcome note or logo.

• To assign an individual ringing tone to a contact, select

Contacts. See ‘Add ringing tones for contacts’, p. 27.

• To assign a speed dial to a contact, press a numbered key in the standby mode ( is reserved for the voice mailbox), and press . Press Yes, then select a contact.

• To rearrange the main menu, in the main menu, select

Options > Move, Move to folder or New folder. You

can move less used applications into folders, and place applications that you use more often into the main menu.

Set tones

To set and customise the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press , and select Tools > Profiles. You can see the currently selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown.

To change the profile, press in the standby mode. Scroll to the profile you want to activate, and select OK.

Tip! You can choose Tone downloads to open a list of

bookmarks. You can select a bookmark and start connection to a Web page to download tones.

To modify a profile, select Tools > Profiles. Scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press to open the choices. Tones stored on the memory card are indicated with . Scroll through the tone list and listen to each one before you make your selection. Press any key to stop the sound.

To create a new profile, select Options > Create new.

Offline profile

The Offline profile lets you use the phone without connecting to the wireless network. When you activate the

Offline profile, the connection to the wireless network is

turned off, as indicated by in the signal strength indicator. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.

Tip! For information on how to change the alert tone

for the calendar or clock, see ‘Personalise your phone’, p. 12.

Warning: In Offline profile you cannot make calls,

except calls to certain emergency numbers, or use features that require network coverage. To make calls, change the profile to activate the phone function. If the device has been locked, you must enter the unlock code before you can change the profile and make calls.

Warning: Your device must be switched on to use

Offline profile. Do not switch the device on when

wireless device use is prohibited or when it may cause interference or danger.

To leave the Offline profile, select another profile, and select Options > Activate > Yes. The phone re-enables wireless transmissions (providing there is sufficient signal strength). If a Bluetooth connection is activated before entering the Offline profile, it will be deactivated. A Bluetooth connection is automatically reactivated after leaving the Offline profile. See ‘Bluetooth connection settings’, p. 80.

Transfer content from another phone

You can copy contacts, calendar, images, video, and sound clips using a Bluetooth connection, from a compatible Nokia Series 60 phone.

Personalise your phone

You can use your Nokia 6681 device without a SIM card. The offline profile is automatically activated when the phone is switched on without a SIM card. This allows you to use the SIM card in another phone.

To avoid duplicate entries, you can transfer the same type of information, for example contacts, from the other phone to your phone only once. To transfer the same information again, you must send the Transfer application to the other phone, and install it, again.

Before starting the transfer to your Nokia 6681 device,

Personalise your phone

you must activate Bluetooth connectivity on both phones. On each phone press , and select Connect. >

Bluetooth. Select Bluetooth > On. Give a name to each

phone.

To transfer content:

1 Press , and select Tools > Transfer on your Nokia

6681 device. Follow the instructions on the screen.

2 The phone searches for devices with Bluetooth

connectivity. When it has finished the search, select your other phone from the list.

3 You are asked to enter a code on your Nokia 6681

device. Enter a code of your choice (1-16 digits), and select OK. Enter the same code on the other phone, and select OK.

4 The Transfer application is sent to the other phone as

a message.

5 Open the message to install Transfer on the other

phone, and follow the instructions on the screen. The application is added to the main menu.

6 From your Nokia 6681 device, select the content you

want to copy from the other phone.

Content is copied from the memory and memory card of the other phone to your Nokia 6681 device and memory card. The copying time depends on the amount of data to be transferred. Data is not removed from the other phone.

Change the look of your phone

To change the look of your phone display, such as the wallpaper, colour palette, and icons, press , and select

Tools > Themes. The active theme is indicated by . In Themes you can group together elements from other

themes or select images from the Gallery to personalise themes further. The themes on the memory card are indicated by . The themes on the memory card are not available if you remove the memory card from the phone. Save the themes to the phone memory before removing the memory card, or reinsert the memory card, to use the themes.

Options in the Themes main view are Preview/

Theme downloads, Apply, Edit, Help, and Exit.

To activate a theme, scroll to it, and select Options >

Apply.

To preview a theme, scroll to it, and select Options >

Preview.

To edit themes, scroll to a theme, and select Options > Edit to change the following options:

• Wallpaper—The image to be shown as a background

image in the standby mode.

• Colour palette—The colours used on the screen.

• Screen saver—The screen saver type: date and time, or

a text you have written yourself. See also Screen saver timeout settings, p. 88.

• Image in 'Go to'—The background image for the Go to

application.

To restore the selected theme back to its original settings, select Options > Restore orig. theme when you edit a theme.

Active standby mode

Use your standby display for fast access to your most frequently used applications.

Some shortcuts may be fixed, and you are not able to change them.

To set the active standby mode on, press , select

Tools > Settings > Phone > Standby mode > Active standby, and press to switch active standby on or off.

The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below.

Scroll to an application or event, and press .

The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on.

To change the default application shortcuts:

1 Press , select Tools > Settings > Phone > Standby

mode > Active standby apps., and press .

2 Highlight a shortcut to an application, and select

Options > Change.

3 Select a new application from the list, and press .

Personalise your phone

Your phone

Put on the wrist strap

Your phone

Thread the strap, and tighten it.

Press , and select Clock.

To set a new alarm, select Options > Set alarm. Enter the alarm time, and select OK. When the alarm is active, the

To turn off the alarm, select Stop. When the alarm tone sounds, select Snooze to stop the alarm for five minutes, after which it will resume. You can do this a maximum of five times.

Note: Use only Nokia

approved enhancements.

Clock

Options in Clock are Set alarm, Reset alarm,

Remove alarm, Settings, Help, and Exit.

indicator is shown in the standby mode.

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

To cancel an alarm, select Clock > Options > Remove

alarm.

Clock settings

To change the clock settings, select Options > Settings in the clock.

To change the clock shown in the standby mode, scroll down, and select Clock type > Analogue or Digital.

To change the alarm tone, scroll down, and select Clock

alarm tone.

To allow the mobile phone network to update the time, date, and time zone information to your phone (network service), scroll down, and select Auto time update. For the

Auto time update setting to take effect, the phone

restarts.

To change the daylight-saving time status, scroll down, and select Daylight-saving. Select On to add one hour to the My home city time. See ‘World clock’ on p. 17. When the daylight-saving is active, the indicator is shown in the clock main view.

World clock

Open Clock, and press to open the world clock view. In the world clock view, you can view the time in different cities.

To add cities to the list, select Options > Add city. Enter the first letters of the city name. The search field appears automatically, and the matching cities are displayed. Select a city. You can add a maximum of 15 cities to the list.

To set your current city, scroll to a city, and select

Options > My home city. The city is displayed in the clock

main view, and the time in your phone is changed according to the city selected. Check that the time is correct and matches your time zone.

Volume and loudspeaker control

To increase or decrease the volume level when you have an active call or

are listening to a sound, press or , respectively.

The built-in loudspeaker allows you to speak and listen to the phone from a short distance without having to hold the phone to your ear, for example, having it on a table nearby. Sound applications use the loudspeaker by default.

Important: Do not hold the phone near your ear

when the loudspeaker is in use, because the volume may be extremely loud.

• To use the loudspeaker during a call, start a call, and press .

• To turn off the loudspeaker when you have an active call or are listening to a sound, press .

File manager

Many features of the phone use memory to store data. These features include contacts, messages, images, ringing tones, calendar and to-do notes, documents, and downloaded applications. The free memory available depends on how much data is already saved in the phone memory. You can use a memory card as extra storage space. Memory cards are rewritable, so you can delete and save data on a memory card.

Your phone

To browse files and folders in the phone memory or on a memory card (if inserted), press , and select Tools > File

mgr.. The phone memory view ( ) opens. Press to

open the memory card view ( ).

To move or copy files to a folder, press and at the

Your phone

same time to mark a file, and select Options > Move to

folder or Copy to folder.

Icons in File mgr.:

Folder Folder that has a subfolder

To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.

Tip! You can use Nokia Phone Browser available in

Nokia PC Suite to view the different memories in your phone. See the CD-ROM supplied in the sales package.

View memory consumption

To view what types of data you have in the phone and how much memory the different data types consume, select

Options > Memory details. Scroll down to Free memory

to view the amount of free memory in the phone.

To view the amount of free memory on the memory card, if you have a card inserted in the phone, press to open

the memory card view, and select Options > Memory

details.

Memory low—free memory

If the phone memory starts to get low, and your browser is open, then the browser is closed automatically to free some memory space. If you do not have your browser open, and the phone memory is low, the phone notifies you that the memory is getting low, and you must free some memory space.

To free phone memory, transfer data to a memory card in the file manager. Mark files to be moved, select Options >

Move to folder > Memory card, and a folder.

To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:

• Messages from Inbox,

Drafts, and Sent folders

in Messaging

• Retrieved e-mail messages from the phone memory

• Saved Web pages

• Saved images, videos, or sound files

• Contact information

•Calendar notes

• Downloaded applications. See also ‘Application manager’, p. 97.

• Any other data that you no longer need

Memory card tool

Note: This device uses a Reduced Size Dual Voltage

(1.8/3V) MultiMediaCard (MMC). To ensure interoperability, use only dual voltage MMCs. Check the compatibility of an MMC with its manufacturer or provider.

Press , and select Tools > Memory. You can use a memory card as extra storage space. You can also back up information from phone memory, and restore the information to the phone later.

You cannot use the memory card if the door of the memory card slot is open.

Keep all memory cards out of the reach of small children.

Do not open the memory card slot door in the middle of an operation. Opening the slot door may damage the memory card as well as the device, and data stored on the card may be corrupted.

Options in the memory card tool are Backup phone

mem., Restore from card, Format mem. card, Memory card name, Memory details, Help, and Exit.

Use only compatible MultiMediaCards (MMC) with this device. Other memory cards, such as Secure Digital (SD) cards, do not fit in the MMC card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

• To back up information from phone memory to a

memory card, select Options > Backup phone mem..

• To restore information from the memory card to the

phone memory, select Options > Restore from card.

Format a memory card

When a memory card is formatted, all data on the card is permanently lost.

Tip! To rename a memory card, select Options >

Memory card name.

Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.

Your phone

To format a memory card, select Options > Format mem.

card. Select Yes to confirm. When formatting is complete,

enter a name for the memory card, and select OK.

Your phone

Make calls

Call

Tip! To inc rea se or de cre ase the vol ume duri ng a cal l,

press or .

1 In the standby mode, enter the phone number,

including the area code. Press to remove a number. For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2 Press to call the number. 3 Press to end the call (or to cancel the call attempt).

Tip! To change the phone number of your voice

mailbox, press , and select Tools > Voice

mailbox > Options > Change number. Enter the

number (obtained from your service provider), and select OK.

Pressing always ends a call, even if another application is active.

To make a call from Contacts, press , and select

Contacts. Scroll to the desired name; or enter the first

letters of the name to the search field. Matching contacts are listed. Press to call.

You must copy the contacts from your SIM to Contacts before you can make a call this way. See ‘Copy contacts’, p. 27.

To call your voice mailbox (network service), press and hold in the standby mode. See also ‘Call diverting’, p. 95.

To call a recently dialled number in the standby mode, press to access a list of the 20 last numbers you called or attempted to call. Scroll to the number you want, and press to call the number.

Speed dial a phone number

To assign a phone number to one of the speed dialling keys ( — ), press , and select Tools > Speed

dial. is reserved for the voice mailbox.

To call in the standby mode, press the speed dial key and

Tip! To speed dial a number by pressing and holding

the key, press , and select Tools > Settings > Call >

Speed dialling > On.

Make calls

Make a conference call

1 Make a call to the first participant. 2 To make a call to another participant, select Options

Make calls

> New call. The first call is automatically put on hold.

3 When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. The phone supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and press Private. The conference call is put on hold on your phone. The other participants can still continue the conference call. Once you have finished the private conversation, select Options > Conference > Add to conference to return to the conference call. To drop a participant, select Options > Conference >

Drop participant, scroll to the participant, and select Drop.

4 To end the active conference call, press .

Answer or reject a call

To answer the call, press .

To mute the ringing tone when a call comes in, select

Silence.

Tip! If a compatible headset is connected to the

phone, answer and end a call by pressing the headset key.

If you do not want to answer a call, press to reject it. The caller hears a line busy tone. If you have activated the

Call divert > If busy function to divert calls, rejecting an

incoming call also diverts the call. See ‘Call diverting’, p.

95.

When you reject an incoming call, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 88.

Call waiting (network service)

You can answer a call while you have another call in progress if you have activated Call waiting (network service) in Tools > Settings > Call > Call waiting.

Tip! To change the phone tones for different

environments and events, for example, when you want your phone to be silent, see ‘Set tones’, p. 12.

To answer the waiting call, press . The first call is put on hold.

To switch between the two calls, press Swap. Select

Options > Transfer to connect an incoming call or a call

on hold wi th a n activ e ca ll and t o di sconne ct y ourself from the calls. To end the active call, press . To end both calls, select Options > End all calls.

Options during a call

Many of the options that you can use during a call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject,

Swap, Hold or Unhold, Activate handset, Activate loudsp.,

or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End

all calls, New call, Conference, and Transfer. Select from

the following:

Replace—To end an active call and replace it by answering

the waiting call.

Send DTMF—To send Dual Tone Multi-frequency (DTMF)

tone strings, for example, a password. Enter the DTMF string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press repeatedly. Select OK to send the tone.

Tip! You can add DTMF tones to the Phone number

or DTMF fields in a contact card.

Log

Recent calls

To monitor the phone numbers of missed, received, and dialled calls, press , and select Connect. > Log >

Recent calls. The phone registers missed and received

calls only if the network supports these functions, the phone is switched on, and within the network’s service area.

Tip! When you see a note in the standby mode about

missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .

Erasing recent call lists—To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press .

Call duration

To monitor the approximate duration of your incoming and outgoing calls, press , and select Connect. > Log >

Call duration.

Make calls

To set the display of the call duration while a call is active, select Connect. > Log > Options > Settings > Show call

duration. Select Yes or No.

Note: The actual time invoiced for calls by your

Make calls

service provider may vary, depending on network features, rounding off for billing, and so forth.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code, see ‘Security’,

‘Phone and SIM’, p. 92.

Packet data

To check the amount of data sent and received during packet data connections, press , and select Connect. >

Log > Packet data. For example, you may be charged for

your packet data connections by the amount of data sent and received.

Monitor all communication events

Icons in Log:

Incoming Outgoing Missed communication events

To monitor all calls, text messages, or data connections registered by the phone, press

, select Connect. > Log, and

press to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information.

Tip! To view a list of sent messages, press , and

select Messaging > Sent.

Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging centre, or Web pages are shown as packet data connections.

Note: When sending messages, your phone may

display Sent. This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

To filter the log, select Options > Filter and a filter.

To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options >

Clear log. Select Yes to confirm.

To set the Log duration, select Options > Settings > Log

duration. The log events remain in the phone memory for

a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.

Packet data counter and connection timer: To view how much data, measured in kilobytes, has been transferred and how long a certain packet data connection has lasted, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.

Make calls

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 49. Contact information can only be sent to or

Contacts (Phonebook)

received from compatible devices.

Options in Contacts are Open, Call, Create

message, New contact, Open conversation, Edit, Delete, Duplicate, Add to group (shown if you have

created a group), Belongs to groups (shown if you have created a group), Mark/Unmark, Copy, SIM

contacts, Go to web address, Send, Contacts info, Settings, Help, and Exit.

Save names and numbers

1 Select Options > New contact. 2 Fill in the fields that you want, and press Done.

Options when editing a contact card are: Add

thumbnail, Remove thumbnail, Add detail, Delete detail, Edit label, Help, and Exit.

To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press

to delete.

Tip! To add and edit contact cards, use Nokia

Contacts Editor available in Nokia PC Suite. See the CD-ROM supplied with your phone.

To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit >

Options > Add thumbnail. The thumbnail image is

shown when the contact calls.

Default numbers and addresses

You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address.

1 In contacts, select a contact, and press . 2 Select Options > Defaults. 3 Select a default to which you want to add a number or

an address, and select Assign.

4 Select a number or an address you want to set as a

default.

The default detail is underlined in the contact card.

Copy contacts

Tip! To send contact information, select the card you

want to send. Select Options > Send > Via text

message, Via multimedia, or Via Bluetooth. See

‘Messaging’, p. 42 and ‘Send data using a Bluetooth connection’, p. 81.

• To copy names and numbers from a SIM card to your phone, press , and select Contacts > Options > SIM

contacts > SIM directory. Select the names you want to

copy and Options > Copy to Contacts.

• To copy a telephone, fax, or pager number from contacts to your SIM card, select Contacts, and open a contact card. Scroll to the number, and select

Options > Copy to SIM direct..

Tip! You can synchronise your contacts to a

compatible PC with Nokia PC Suite. See the CD-ROM supplied with your phone.

SIM directory and other SIM services

Note: For availability, rates, and information on

using SIM services, contact your SIM card vendor (network operator, service provider or other vendor).

Press , and select Contacts > Options > SIM

contacts > SIM directory to see the names and numbers

stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.

Add ringing tones for contacts

When a contact or group member calls you, the phone plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your phone recognises it).

1 Press to open a contact card, or go to the groups

list, and select a contact group.

2 Select Options > Ringing tone. A list of ringing tones

opens.

3 Select the ringing tone you wish to use for the

individual contact or the selected group.

To remove the ringing tone, select Default tone from the list of ringing tones.

Contacts (Phonebook)

Voice dialling

You can make a phone call by saying a voice tag that has been added to a contact card. Any spoken words can be a voice tag.

Before using voice tags, note the following:

• Voice tags are not language-dependent. They are dependent on the speaker's voice.

• You must say the name exactly as you said it when you

Contacts (Phonebook)

recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names for different numbers.

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.

Add a voice tag

Example: You can use a person’s name as a voice tag

(for example, ’John’s mobile’).

You can have only one voice tag per contact card. You can add a voice tag to up to 50 phone numbers.

1 In Contacts, open the contact card to which you want

to add a voice tag.

2 Scroll to the number to which you want to add the

voice tag, and select Options > Add voice tag.

Tip! To view a list of voice tags you have defined,

select Contacts > Options > Contacts info > Voice

tags.

3 Select Start to record a voice tag. After the starting

tone, say clearly the words you want to record as a voice tag. Wait until the phone plays the recorded tag and saves it. is displayed next to the number in the contact card, indicating that a voice tag has been added to it.

Make a call with a voice tag

You must say the voice tag exactly as you said it when you recorded it. When you are making a call by saying a voice tag, the loudspeaker is in use. Hold the phone at a short distance away, and say the voice tag clearly.

Press and hold . A short tone is played, and the note

Speak now is displayed. The phone plays the original voice

tag, displays the name and number, and dials the number of the recognised voice tag.

Tip! To listen to, change, or delete a voice tag, open a

contact card, and scroll to the number that has a voice tag (indicated by ). Select Options > Voice tags >

Playback, Change, or Delete.

Create contact groups

1 In Contacts, press to open the groups list. 2 Select Options > New group. 3 Write a name for the group or use the default name

Group 1, and select OK.

4 Open the group, and select Options > Add members. 5 Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all the contacts you want to add.

6 Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the new name, and select OK.

Options in the groups list view are Open, New group,

Delete, Rename, Ringing tone, Contacts info, Settings, Help, and Exit.

Remove members from a group

1 In the groups list, open the group you want to modify. 2 Scroll to the contact, and select Options > Remove

from group.

3 Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs,

scroll to the contact, and select Options > Belongs

to groups.

Contacts (Phonebook)

Camera and Gallery

Camera

Respect the personal rights of others and obey the local laws, regulations, and customs when taking and using images or video clips.

Camera and Gallery

With the Camera application you can take pictures and record videos while on the move. The images and video clips are automatically saved in the Gallery application. The camera produces JPEG images, and video clips are recorded in the 3GPP file format with the .3gp file extension. You can also send images or video clips in a multimedia message, as an e-mail attachment, or using a Bluetooth connection.

Open the camera lens cover on the back of the phone to open the camera, or press Camera.

The Camera application starts when the camera lens cover is open, and you can see the view to be captured. Press to move between Image and Video views.

Tip! You can insert an image into a contact card. See

‘Save names and numbers’, p. 26.

The Nokia 6681 device supports an image capture resolution of up to 1280 x 960 pixels. The image resolution in these materials may appear different.

Take pictures

Press or to move between Image and Video views. Open the Image view.

Options before taking a picture are Capture, New,

Flash, Activate night mode/Deact. night mode, Sequence mode/Normal mode, Self-timer, Go to Gallery, Adjust, Settings, Help, and Exit.

Camera indicators show the following:

• The phone memory ( ) and memory card ( ) indicators (1) show where images are saved.

• The images indicator (2) estimates how many images, depending on the selected image quality, can fit in the remaining memory of your phone or the memory card.

• The zoom indicator (3) shows the zoom level. Press to zoom in, press to zoom out.

• The flash indicator (4) shows if the flash is On (), Off (), or Automatic ().

• The night mode indicator (5) shows that the night mode is active.

• The sequence mode indicator (6) shows that sequence mode is active. See ‘Take pictures in a sequence’, p. 32.

• The self-timer indicator (7) shows how much time is left before a picture is taken. See ‘You in the picture—self-timer’, p. 32.

Shortcuts are as follows:

• Press to activate or deactivate night mode.

• Press to activate or deactivate sequence mode.

• Press to adjust brightness.

• Press o to adjust contrast.

To take a picture, press . Do not move the phone before the image is saved. The image is saved automatically in the

Images folder of Gallery. See ‘Gallery’, p. 35.

Saving the captured image may take longer if you have changed the zoom, lighting, or colour settings.

When taking a picture, note the following:

• It is recommended to use both hands to keep the camera still.

• To take images or record video in a dark environment, use the night mode. If you are using the night mode, the exposure time is longer and the camera needs to be kept still longer.

• To make lighting and colour adjustments before taking a picture, select Options > Adjust > Brightness,

Contrast, White balance , or Colour tone. See ‘Adjust

colour and lighting’, p. 32.

• The quality of a zoomed picture is lower than that of a nonzoomed picture, but the image remains the same size. You may notice the difference in image quality if viewed on a PC.

• Camera goes into battery saving mode if there are no key presses within a minute. To continue taking pictures, press .

After the image has been taken, note the following:

• If you do not want to keep the image, press .

• To return to the viewfinder to take a new picture, press

• To send the image Via multimedia, Via e-mail, or Via

Bluetooth, press . For more information see

‘Messaging’, p. 42 and ‘Bluetooth connection’, p. 80.

• To set the picture as wallpaper in the standby mode, select Options > Set as wallpaper.

Camera and Gallery

Take pictures in a sequence

Select Options > Sequence

mode to set the camera to

take six pictures in a sequence. After the pictures are taken, they are automatically saved in

Gallery, and are shown in a

grid.

Camera and Gallery

You in the picture—self-timer

Use the self-timer to delay the taking of a picture so that you can include yourself in the picture. To set the self-timer delay, select Options > Self-timer > 10

seconds, 20 seconds, or 30 seconds. Select Activate. The

self-timer indicator ( ) blinks and the phone beeps when the timer is running. The camera takes the picture after the selected delay has elapsed.

The flash

The camera has an LED flash for low light conditions. The following flash modes are available: On, Off, and

Automatic.

Select Options > Flash > On to use the flash.

If the flash is set to Off or Automatic during bright conditions, the flash still emits a low light when an image is captured. This allows the subject of the picture to see when the picture is taken. There is no flash effect on the resultant picture.

Adjust colour and lighting

To enable the camera to reproduce colours and lighting more accurately, or to add effects to your pictures or videos, select Options > Adjust, and select from the following:

Brightness—Scroll left and right to select the appropriate

brightness setting.

Contrast—Scroll left and right to select the appropriate

contrast setting.

White balance—Select the current lighting condition from

the list. This allows the camera to reproduce colours more accurately.

Colour tone—Select a colour effect from the list.

The screen display changes to match any settings made, showing you how the final pictures or videos will look.

Adjust camera settings

1 Select Options > Settings > Image. 2 Scroll to the setting you want to change:

Image quality—High, Normal, and Basic. The better the

image quality, the more memory the image consumes. The quality of a zoomed picture is lower than that of a nonzoomed picture, but the image remains the same size. You may notice the difference in image quality if viewed on a PC, for example. If you are going to print the image, select High or Normal image quality.

Show captured image—Select Yes if you want to see the

captured image after it has been taken or No if you want to continue taking pictures immediately.

Image resolution—Select the resolution you want to use

for the images you are going to take. Glossary: Resolution is a measure of sharpness and

clarity of an image. Resolution refers to the number of pixels in an image. The more pixels, the more detailed the picture is, and the more memory it consumes.

Default image name—Set a default name for the images

you are going to take. You can replace the date with your own text (for example, ‘Holiday_2005’).

Memory in use—Select where to store your images.

Record videos

Press or to move between Image and Video views. Open the Video view.

Options before recording a video are Record, New,

Activate night mode/Deact. night mode, Mute/Unmute, Go to Gallery, Adjust, Settings, Help, and Exit.

Video recorder indicators show the following:

• The phone memory ( ) and memory card ( ) indicators (1) show where the video is saved.

• The current video length indicator (2) shows elapsed time and time remaining.

• The zoom indicator (3) shows the zoom level. Press to zoom in on your subject before or during recording. Press to zoom out.

• The microphone indicator (4) shows that the microphone is muted.

• The night mode indicator (5) shows that the night mode is active.

Shortcuts are as follows:

Camera and Gallery

• Press to activate or deactivate the night mode.

• Press to adjust brightness.

• Press to adjust contrast.

To make lighting and colour adjustments before taking a picture, select Options > Adjust > Brightness, Contrast,

White balance, or Colour tone. See ‘Adjust colour and

lighting’, p. 32.

Press to start recording. The record icon is shown.

Camera and Gallery

If you use the camera to record a video clip, the LED flash is constantly on in low power mode, indicating that a video clip is being recorded.

To pause recording at any time, press . The pause icon

starts to blink on the display. Press again to

resume recording.

Video recording automatically stops if recording is set to pause and there are no key presses within a minute.

Select Stop to stop recording. The video clip is automatically saved to the Video clips folder of Gallery. See ‘Gallery’, p. 35.

After a video clip has been recorded:

• To immediately play the video clip you just recorded,

select Options > Play.

• If you do not want to keep the video, press .

• To return to the viewfinder to record a new video, press .

• To send the video Via multimedia, Via e-mail or Via

Bluetooth, press . For more information, see

‘Messaging’, p. 42 and ‘Bluetooth connection’, p. 80.

Adjust video recorder settings

Select Options > Settings > Video and the setting you want to change:

Length—If you select Maximum, the length of the video

recording is restricted by the available space on your memory card, and up to one hour per clip. You cannot send a video clip recorded like this by MMS, due to the recording properties. Select Short to record video clips up to 300 kB (approximately 30 seconds in duration) so that they can be conveniently sent as a multimedia message to a compatible device. Some networks, however, may only support sending of multimedia messages with a maximum size of 100 kB.

Video resolution—Select 128x96 or 176x144.

Default video name—Define a default name, or select the

date.

Memory in use—Define the default memory store: phone

memory or memory card.

Gallery

To store and organise your images, video clips, tracks, sound clips, links, and .ram files, press , and select

Gallery.

Select Images , Video clips , Tracks , Sound clips

, Links , or All files , and press to open it.

You can browse, open, and create folders; and mark, copy, and move items to folders. Sound clips, video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See ‘RealPlayer™’, p. 39.

Tip! You can transfer images from your phone to a

compatible PC with Nokia Phone Browser available in Nokia PC Suite. See the CD-ROM supplied with your phone.

Tip! You can transfer music files from your phone to

your memory card with Nokia Audio Manager available in Nokia PC Suite. See the CD-ROM supplied with your phone.

Tip! You can also transfer files from your phone to

your memory card using the MMC card reader supplied in the sales package.

Press to open a file or a folder. Images are opened in the image viewer. See ‘View images’, p. 35.

To copy or move files to the memory card or to phone memory, select a file and Options > Organise > Copy to

memory card/Move to memory card or Copy to phone mem./Move to phone mem.. Files stored on the memory

card are indicated with .

To download files into Gallery in one of the main folders using the browser, select Graphic downls., Video

downlds., Track downlds., or Sound downlds.. The browser

opens, and you can select a bookmark from which site to download.

To search for a file, select Options > Find. Start to enter a sea rc h stri ng (for exa mp le, the n am e or date of the file yo u are searching). Files that match your search are shown.

View images

Pictures taken with Camera are stored in Gallery. Images can also be sent to you in a multimedia message, as an e-mail attachment, or through a Bluetooth connection. To be able to view a received image in the gallery, you need to save it in the phone memory or on a memory card.

Open the Images folder in Gallery to start the image viewer, select an image, and press to view it.

Options when viewing an image are Send, Set as

wallpaper, Rotate, Zoom in/Zoom out, Full screen, Delete, Rename, View details, Add to 'Go to', Help, and Exit.

Camera and Gallery

To zoom an image, select Options > Zoom in or Zoom

out. You can see the zooming ratio at the top of the

display. The zooming ratio is not stored permanently. To move the focus when you are zooming an image, use the scroll key.

To see more of the image, select Options > Full screen. The panes around the image are removed.

To rotate the image, select Options > Rotate.

Camera and Gallery

Imaging

Video editor

To create custom video clips, press , and select

Imaging > Vid. editor. You can combine and trim video

clips, and add sound clips, transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips.

Edit video, sound, and transitions

1 Mark and select one or more video clips. 2 Select Options > Edit. In the edit video view, you can

insert video clips to make a custom video clip, and edit the clips by trimming and adding effects. You can add sound clips and change their duration. Press and

to move between the video clip and the sound clip.

Tip! To take a snapshot of a video clip, select

Options > Take snapshot in the play view, edit

preview view, or in the cut view.

To modify the video, select one of the following options:

Preview—Previews the custom video clip.

Cut—Trims the video clip or a sound clip in the cut

video clip or in the cut sound clip view.

Insert:

• Video clip—Inserts the selected video clip. A

thumbnail of the video clip is shown in the main view. A thumbnail consists of the first non-black view of the video clip. The name and length of the selected video clip is also shown.

• Sound clip—Inserts the selected sound clip. The

name and length of the selected sound clip is shown in the main view.

• New sound clip—Records a new sound clip to the

selected location.

Edit video clip:

• Move—Moves the video clip to the selected location.

• Add colour effect—Inserts a colour effect on the

video clip.

• Use slow motion—Slows the speed of the video clip.

• Mute sound/Unmute sound — Mutes or unmutes the

original video clip sound.

• Remove—Removes the video clip from the video.

• Duplicate—Makes a copy of the selected video clip.

Edit sound clip:

• Move—Moves the sound clip to the selected

location.

Imaging

• Set duration—Edits the sound clip length.

• Remove—Removes the sound clip from the video.

• Duplicate—Makes a copy of the selected sound clip.

Imaging

Edit transition—There are three types of transitions: at

the start of a video, at the end of a video, and transitions between video clips. A start transition can be selected when the first transition of the video is active.

3 Select Save to save your video. Define the Memory in

use in Settings. The default is the phone memory.

Tip! In the settings view you can define the

Default video name, Default sc. shot name, and Memory in use.

Select Send > Via multimedia, Via e-mail, or Via Bluetooth if you want to send the video. Contact your service provider for details of the maximum multimedia message size that you can send. If your video is too large to be sent in a multimedia message, appears.

Tip! If you want to send a video clip that is over the

maximum multimedia message size allowed by your service provider, you can send the clip using a Bluetooth connection. ‘Send data using a Bluetooth connection’, p.

81. You can also transfer your videos using a Bluetooth connection into your Bluetooth-enabled personal computer, or by using a memory card reader (internal/ external).

Image manager

To browse your images visually, press , and select

Imaging > Image mgr.

1 Press to select Phone

mem. or Memory card

memory. Image mgr. also shows how many folders or images are in the selected folder.

2 Open a folder to browse

your images visually. Press

and to move between images and folders. Press to view an image. Press and simultaneously to mark images for an image show. A check mark is shown next to a selected image. Select Options > Image show. Press and to view the previous or next image in the show. Press to return to the previous view.

Image print

Use Image print to print your images using USB (PictBridge-compliant), a Bluetooth connection, or your MMC. You can select from a list of available printers displayed in the printer selection view.

Note: To print to a PictBridge-compliant printer,

select Image print before you connect the USB cable.

Press , and select Imaging > Image print. Select the images you want to print.

Options in the image selection view are Print, Mark/

Unmark, Open (displayed when you select an album), Help, and Exit.

Printer selection

Once you have selected images you want to print, a list of available printing devices is displayed. If you have connected a PictBridge-compliant USB printer using the DKU-2 cable supplied with the phone, the printer is automatically displayed.

Select the device you want to use. The print preview screen is displayed.

Print preview

After you select a printing device, the images that you selected are displayed using predefined layouts. To change the layout, use the left and right scroll key to scroll through the available layouts for the selected printer. If you selected more images than will fit on a single page, scroll up or down to display the additional pages.

Options in print preview are Print, Settings, Help,

and Exit.

Print settings

The available options vary depending on the capabilities of the printing device you selected.

To select the paper size, select Paper size, select the size of paper from the list, and select OK. Select Cancel to return to the previous view.

RealPlayer™

Press , and select Imaging > RealPlayer. With

RealPlayer, you can play video clips, sound clips, and

playlists, or stream media files over the air. A streaming link can be activated when you are browsing Web pages, or it can be stored in the phone memory or memory card.

Imaging

RealPlayer supports files with extensions such as .aac,

.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer

Imaging

attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this phone.

Options in RealPlayer when a clip is selected are

Play, Play in full screen/Continue, Continue in full scr.; Stop, Mute/Unmute, Clip details, Send, Settings, Help,

and Exit.

Play video or sound clips

1 To play a media file stored in phone memory or on the

memory card, select Options > Open and select:

Most recent clips—To play one of the last six files

played in RealPlayer.

Saved clip—To play a file saved in Gallery. See ‘Gallery’,

p. 35.

Mem. card sound clips—To play files saved on the

memory card.

2 Scroll to a file, and press to play the file.

Tip! To view a video clip in full screen mode, press

. Press again to change back to normal screen

mode.

Icons in RealPlayer:

Repeat Random Repeat and random Loudspeaker muted

Shortcuts during play:

To fast forward, press and hold .

To rewind through the media file, press and hold .

To mute the sound, press and hold until the indicator is displayed. To turn on the sound, press and hold

until you see the indicator.

Stream content over the air

Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.

The access points may be configured when you first start your phone.

Contact your service provider for more information.

Note: In RealPlayer, you can only open an rtsp:// URL

address. However, RealPlayer will recognise an http link to a .ram file.

To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text

message or multimedia message. Before live content begins streaming, your phone connects to the site and start loading the content.

Receive RealPlayer settings

You may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 49. For more information, contact your network operator or service provider.

Change the RealPlayer settings

Select Options > Settings and from the following:

Video—To select if you want to automatically repeat video

clips after they finish playing.

Audio—To select if you want to repeat playing of track lists

and play sound clips on a track list in random order.

Connection—To select whether to use a proxy server,

change the default access point, and set the time-outs and port range used when connecting. Contact your service provider for the correct settings.

Proxy:

• Use proxy—To use a proxy server, select Yes.

• Proxy serv. address—Enter the IP address of the proxy

server.

• Proxy port number—Enter the port number of the

proxy server.

Glossary: Proxy servers are intermediate servers between

media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips.

Network:

• Default access point—Scroll to the access point you

want to use to connect to the Internet, and press .

• Online time—Set the time for RealPlayer to disconnect

from the network when you have paused a media clip playing through a network link, select User defined, and press . Enter the time, and select OK.

• Connection time-out—Press or to set the

maximum time to elapse between selecting a network link and connecting to the media server, and select OK.

• Server time-out—Press or to set the maximum

time to wait for a response from the media server before disconnecting, and select OK.

• Lowest UDP port—Enter the lowest port number of the

server port range. The minimum value is 6970.

• Highest UDP port—Enter the highest port number of

the server port range. The maximum value is 32000. Select Options > Advanced settings to edit the bandwidth values for different networks.

Imaging

Messaging

Press , and select Messaging. In Messaging, you can create, send, receive, view, edit, and organise text

Messaging

messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data through a Bluetooth connection, receive Web service messages, cell broadcast messages, and send service commands.

When you open Messaging, you can see the New message function and a list of folders:

Options in the Messaging main view are Open,

Create message, Connect (shown if you have defined

mailbox settings)/Disconnect (shown if a connection to the mailbox is active), SIM messages, Cell

broadcast, Service command, Settings, Help, and Exit.

Note: These functions can only be used if they are

supported by your network operator or service provider. Only devices that offer compatible multimedia message, or e-mail features can receive and display these messages. Some networks might provide the recipient device with a Web page link to view multimedia messages.

Inbox—Contains received messages except e-mail

and cell broadcast messages. E-mail messages are stored in the Mailbox.

My folders—For organising your messages into

folders.

Mailbox—In Mailbox you can connect to your

remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 55.

Drafts—Stores draft messages that have not been

sent.

Sent—Stores the last 20 messages that have been

sent excluding messages sent using a Bluetooth connection. To change the number of messages to be saved, see ‘Other settings’, p. 57.

Outbox—A temporary storage place for messages

waiting to be sent.

Reports—You can request the network to send you a

delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address might not be possible.

Tip! When you have opened any of the default folders,

you can switch between the folders by pressing or

To enter and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider, select Options > Service

command in the main view of Messaging.

Cell broadcast is a network service that allows you to

receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options >

Cell broadcast. In the main view you can see the status of

a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Options in Cell broadcast are Open, Subscribe/

Unsubscribe, Hotmark/Remove hotmark, Topic, Settings, Help, and Exit.

A packet data connection may prevent cell broadcast reception.

Write text

Traditional text input

and indicate the selected case. means that the first letter of the word is written in upper case, and all other letters are automatically written in lower case. indicates number mode.

is shown on the top right of the display when you are writing text using traditional text input.

• Press a number key ( — ) repeatedly

until the desired character appears. There are more characters available for a number key than are printed on the key.

• To insert a number, press and hold the number key.

• To switch between letter and number mode, press and

hold .

• If the next letter is located on the same key as the

present one, wait until the cursor appears (or press to end the time-out period), and enter the letter.

• To erase a character, press . Press and hold to

clear more than one character.

• The most common punctuation marks are available

under . Press repeatedly to reach the desired punctuation mark.

Messaging

Press to open a list of special characters. Use

to move through the list, and press Select to select

a character.

• To insert a space, press . To move the cursor to

Messaging

the next line, press three times.

• To switch between the different character cases Abc,

abc, and ABC, press .

Predictive text input—Dictionary

You can enter any letter with a single key press. Predictive text input is based on a built-in dictionary to which you can also add new words. When the dictionary becomes full, the latest added word replaces the oldest.

1 To activate predictive

text input, press , and select Dictionary on. This activates predictive text input for all editors in the phone. is shown on the top right of the display when you write text using predictive text input.

2 To write the desired word, press the keys —

example, to write ‘Nokia’ when the English dictionary

. Press each key only once for one letter. For

is selected, press for N, for o,

for k, for i, and for a.

The word suggestion changes after each key press.

3 When you finish writing the word and it is correct, to

confirm it, press , or press to add a space. If the word is not correct, press repeatedly to view the matching words the dictionary has found one by one, or press , and select Dictionary > Matches. If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, select Spell, enter the word (up to 32 letters) using traditional text input, and select OK. The word is added to the dictionary. When the dictionary becomes full, a new word replaces the oldest added word.

4 Start writing the next word.

Tip! To set predictive text input on or off, press

twice quickly.

Tips on predictive text input

To erase a character, press . Press and hold to clear more than one character.

To change between the different character cases Abc, abc, and ABC, press . If you press quickly twice, predictive text input is turned off.

Tip! Predictive text input tries to guess which

commonly used punctuation mark (.,?!‘) is needed. The

order and availability of the punctuation marks depend on the language of the dictionary.

To insert a number in letter mode, press and hold the desired number key.

To switch between letter and number mode, press and hold

The most common punctuation marks are available under

. Press and then repeatedly to

search for the desired punctuation mark.

Press and hold to open a list of special characters.

Press repeatedly to view the matching words the dictionary has found one by one.

Press , select Dictionary, and press to select one of the following options:

Matches—To view a list of words that correspond to your

key presses.

Insert word—To add a word (up to 32 letters) to the

dictionary by using traditional text input. When the dictionary becomes full, a new word replaces the oldest added word.

Edit word—To edit the word using traditional text input.

This is available if the word is active (underlined).

Tip! When you press , the following options

appear (depending on the editing mode): Dictionary

(predictive text input), Alpha mode (traditional text input), Number mode, Cut (if text has been selected),

Copy (if text has been selected), Paste (when text has

been cut or copied first), Insert number, Insert symbol, and Writing language: (changes the input language for all editors in the phone).

Write compound words

Write the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.

Turn predictive text input off

Press , and select Dictionary > Off to turn predictive text input off for all editors in the phone.

Copy text to clipboard

1 To select letters and words, press and hold . At the

same time, press or . As the selection moves, text is highlighted.

2 To copy the text to the clipboard, while still holding

, press Copy.

3 To insert the text into a document, press and hold ,

and press Paste, or press once, and select Paste. To select lines of text, press and hold . At the same time press or .

Messaging

To remove the selected text from the document, press

Write and send messages

Messaging

The appearance of a multimedia message may vary, depending on the receiving device.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Tip! You can start to create a message from any

application that has the option Send. Select a file (image or text) to be added to the message, and select

Options > Send.

Before you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘Receive MMS and e-mail settings’, p. 47 and ‘E-mail’, p. 55.

Options in the message editor are Send, Add

recipient, Create presentation (MMS), Insert (SMS and

e-mail), Insert object (MMS), Insert new (MMS),

Remove (MMS), Preview (MMS), Attachments (e-

mail), Objects (MMS), Delete, Check contacts,

Message details, Sending options, Help, and Exit.

1 Select New message. A list of message options opens.

Text message—to send a text message.

Multimedia message—to send a multimedia message

(MMS).

E-mail—to send an e-mail. If you have not set up your

e-mail account, you are prompted to do so.

2 Press to select recipients or groups from contacts,

or enter the recipient’s phone number or e-mail address. Press to add a semicolon (;) that separates the recipients. You can also copy and paste the number or address from the clipboard.

Tip! Scroll to a contact, and press to mark it.

You can mark several recipients at a time.

3 Press to move to the message field. 4 Write the message. 5 To add a media object to a

multimedia message, select Options > Insert

object > Image, Sound clip, or Video clip. When

sound is added, the icon is shown.

6 To take a new picture or

record sound or video for a multimedia message, select Insert new >

Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide.

Select Options > Preview to see what the multimedia message looks like.

7 If you select Insert new > Sound clip, Recorder opens,

and you can record a new sound. Press Select, the new sound is automatically saved, and a copy is inserted in the message. Select Options > Preview to see what the multimedia message looks like.

8 To add an attachment to an e-mail, select Options >

Insert > Image, Sound clip, Video clip, or Note. E-mail

attachments are indicated by , in the navigation bar.

9 To send the message, select Options > Send, or press

. Note: Your device supports the sending of text

messages beyond the normal 160-character limit. If your message exceeds 160 characters, it will be sent as a series of two or more messages and sending may cost you more. In the navigation bar, you can see the message length indicator counting backwards from

160. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages. Some characters may take more space than others.

Note: E-mail messages are automatically placed in

Outbox before sending. If sending does not succeed,

the e-mail is left in the Outbox with the Failed status.

Tip! When you send a multimedia message to an e-

mail address or a device that supports the receiving of large images, use the larger image size. If you are not

sure of the receiving device, or the network does not support sending large files, it is recommended that you use a smaller image size or a sound clip that is no longer than 15 seconds. To change the setting, select

Options > Settings > Multimedia message > Image size in the Messaging main view.

Tip! In Messaging you can also create presentations

and send them in a multimedia message. In the multimedia message editor view, select Options >

Create presentation (shown only if MMS creation mode

is set to Guided or Free). See ‘Multimedia messages’, p.

54.

Receive MMS and e-mail settings

You may receive the settings in a text message from your network operator or service provider. See ‘Data and settings’, p. 49.

For availability of and subscription to data services, contact your network operator or service provider. Follow the instructions given by your service provider.

Enter the MMS settings manually

1 Select Tools > Settings > Connection > Access

points, and define the settings for a multimedia

messaging access point. See ‘Connection settings’, p.

89.

Messaging

2 Select Messaging > Options > Settings >

Multimedia message > Access point in use and the

access point you created to be used as the preferred connection. See also ‘Multimedia messages’, p. 54.

Messaging

Tip! To send files other than sounds and notes as

attachments, open the appropriate application, and select Send > Via e-mail, if available.

Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:

• Configure an Internet access point (IAP) correctly. See ‘Connection settings’, p. 89.

• Define your e-mail settings correctly. See ‘E-mail’, p.

55. You need to have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).

Inbox—receive messages

Inbox icons:

Unread messages in Inbox Unread text message Unread multimedia message Data received through a Bluetooth connection

When you receive a message, 1 new message is shown in the standby mode. Press Show to open the message. To open a message in Inbox, scroll to it, and press .

If a message contains phone numbers, e-mail addresses, or URLs, they are underlined. Each underlined item can be used as a shortcut. Press or to move through the items, and select Options in each case to, for example, make a call using a phone number in the message.

To remove the underlining and shortcuts, select Automatic

find off.

Multimedia messages

Important: Multimedia message objects may

contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

When you open a multimedia message ( ), you may see an image and a message, and simultaneously listen to a sound through the loudspeaker ( is shown if sound is included). Press the scroll key to listen to the sound.

To see what kinds of media objects have been included in the multimedia message, open the message, and select

Options > Objects. You can choose to save a multimedia

object file in your phone or send it, for example, through a Bluetooth connection to another compatible device.

You may also receive multimedia presentations. You can view these presentations by selecting Options > Play

presentation.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Data and settings

Your phone can receive many kinds of text messages that contain data ( ), also called over-the-air (OTA) messages:

Configuration message—You may receive a text message

service number, voice mailbox number, Internet access point settings, access point login script settings, or e-mail settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select

Options > Save all.

Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files

attached to the business card are not saved.

Ringing tone—To save the ringing tone, select Options > Save.

Operator logo—For the logo to be shown in the standby

mode instead of the network operator’s own identification, select Options > Save.

Tip! To change the default access point settings for

multimedia messaging, select Messaging > Options >

Settings > Multimedia message > Access point in use.

Calendar entry—To save the invitation, select Options > Save to Calendar.

Web message—To save the bookmark to the bookmarks

list in Web, select Options > Add to bookmarks. If the message contains both access point settings and bookmarks, to save the data, select Options > Save all.

E-mail notification—Tells you how many new e-mails

you have in your remote mailbox. An extended notification may list more detailed information.

Tip! If you receive a vCard file that has a picture

attached, the picture is saved to contacts.

Web service messages

Web service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Messaging

My folders

In My folders, you can organise your messages into folders, create new folders, and rename and delete folders.

Messaging

Tip! You can use texts in the templates folder to

avoid rewriting messages that you send often.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. See ‘E-mail’, p. 55. When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Open the mailbox

When you open the mailbox, you can choose whether you want to view the previously retrieved e-mail messages and e-mail headings offline or connect to the e-mail server.

When you scroll to your mailbox, and press , the phone asks you if you want to

Connect to mailbox?

Select Yes to connect to your mailbox, and retrieve new email headings or messages. When you view messages online, you are continuously connected to a remote mailbox using a packet data connection. See also ‘Connection settings’, p. 89.

Select No to view previously retrieved e-mail messages offline. When you view e-mail messages offline, your phone is not connected to the remote mailbox.

Retrieve e-mail messages

If you are offline, select Options > Connect to start a connection to a remote mailbox.

Important: E-mail messages may contain viruses or

otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

1 When you have an open connection to a remote

mailbox, select Options > Retrieve e-mail.

New—to retrieve all new e-mail messages to your

phone.

Selected—to retrieve only the e-mail messages that

have been marked.

All—to retrieve all messages from the mailbox.

To stop retrieving messages, select Cancel.

2 After you have retrieved the e-mail messages, you can

continue viewing them online, or select Options >

Disconnect to close the connection and view the

e-mail messages offline. E-mail status icons:

New e-mail (offline or online mode): the content

has not been retrieved to your phone (arrow outwards).

New e-mail: the content has been retrieved to your

phone (arrow inwards).

The e-mail message has been read.

The e-mail heading that has been read and the

message content has been deleted from the phone.

3 To open an e-mail message, press . If the e-mail

message has not been retrieved (arrow in the icon is pointing outwards) and you are offline, you are asked if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment indicator , and select Options >

Attachments. If the attachment has a dimmed indicator,

it has not been retrieved to the phone; select Options >

Retrieve. In the Attachments view, you can retrieve,

open, save, or remove attachments. You can also send attachments using a Bluetooth connection.

Tip! If your mailbox uses the IMAP4 protocol, you can

define how many messages to retrieve, and whether to retrieve the attachments. With the POP3 protocol, the options are Headers only, Partially (kB), or Msgs. &

attachs..

Retrieve e-mail messages automatically

To retrieve messages automatically, select Options >

E-mail settings > Automatic retrieval > Header retrieval:

Select Always on, or Only in home net., and define when, and how often, the messages are retrieved.

Retrieving e-mail messages automatically may increase your call costs due to the data traffic.

Delete e-mail messages

To delete the contents of an e-mail message from the phone while still retaining it in the remote mailbox, select

Options > Delete > Delete msg. from: > Phone only.

Messaging

The phone mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your phone. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a

Messaging

connection from your phone to the remote mailbox again to update the status.

Tip! To copy an e-mail from the remote mailbox to a

folder under My folders, select Options > Copy to

folder, a folder from the list, and OK.

To delete an e-mail from the phone and the remote mailbox, select Options > Delete > Delete msg. from: >

Phone and server.

If you are offline, the e-mail is deleted first from your phone. During the next connection to the remote mailbox, it is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.

To cancel deleting an e-mail from the phone and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options >

Undelete.

Disconnect from the mailbox

When you are online, select Options > Disconnect to end the packet data connection to the remote mailbox.

Tip! You can also leave your mailbox connection open

and the new e-mails (Headers only as default) will be retrieved from the remote mailbox to your phone automatically (only if the IMAP IDLE function is supported by your server). To leave the messaging application open in the background, press twice. Leaving the connection open may increase your call costs due to the data traffic.

View e-mail messages when offline

When you open Mailbox the next time and you want to view and read the e-mail messages offline, answer No to the Connect to mailbox? query. You can read the previously retrieved e-mail headings, the retrieved e-mail messages, or both. You can also write new, reply to, or forward e-mail to be sent the next time you connect to the mailbox.

Outbox—messages waiting to be sent

Outbox is a temporary storage place for messages waiting

to be sent.

Status of the messages in Outbox are:

Sending—A connection is being made and the message is

being sent.

Waiting/Queued—The message will be sent when previous

messages of a similar type have been sent.

Resend at %U (time)—The phone will try to send the

message again after a time-out period. Select Options >

Send to restart the sending immediately.

Deferred—You can set documents to be on hold while they

are in Outbox. Scroll to a message that is being sent, and select Options > Defer sending.

Failed—The maximum number of sending attempts has

been reached. Sending has failed. If you were trying to send a text message, open the message, and check that the sending options are correct.

Example: Messages are placed in the outbox, for

example, when your phone is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox.

View messages on a SIM card

Before you can view SIM messages, you need to copy them to a folder in your phone.

1 In the Messaging main view, select Options > SIM

messages.

2 Select Options > Mark/Unmark > Mark or Mark all

to mark messages.

3 Select Options > Copy. A list of folders opens. 4 Select a folder and OK to start copying. Open the

folder to view the messages.

Messaging settings

Text messages

Select Messaging > Options > Settings > Text message.

Message centres—Lists all the text message centres that

have been defined.

Msg. centre in use—Select which message centre is used

for delivering text messages.

Receive report (network service)—To request the network

to send delivery reports on your messages. When set to

No, only the Sent status is shown in Log. See ‘Log’, p. 23.

Message validity—If the recipient of a message cannot be

reached within the validity period, the message is removed from the text message centre. The network must support this feature. Maximum time is the maximum amount of time allowed by the network.

Messaging

Message sent as—Change this option only if you are sure

that your message centre is able to convert text messages into these other formats. Contact your network operator.

Preferred connection—You can send text messages

through the normal GSM network or through packet data,

Messaging

if supported by the network. See ‘Connection settings’, p.

89.

Reply via same ctr. (network service)—Choose Yes, if you

want the reply message to be sent using the same text message centre number.

Options when editing text message centre settings

are Edit, New msg. centre, Delete, Help, and Exit.

Add a new text message centre

1 Select Message centres > Options > New msg.

centre.

2 Press , write a name for the message centre, and

select OK.

3 Press and , and write the number of the text

message centre. You receive the number from your service provider.

4 Select OK. 5 To use the new settings, go back to the settings view.

Scroll to Msg. centre in use, and select the new message centre.

Multimedia messages

Select Messaging > Options > Settings > Multimedia

message.

Image size—Define the size of the image in a multimedia

message. The options are Small, Large, and Original (shown only when the MMS creation mode is set to Guided or Free). Select Original to increase the size of the multimedia message.

MMS creation mode—If you select Guided, the phone

informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the phone prevents you from sending messages that are not supported.

Access point in use (Must be defined)—Select which

access point is used as the preferred connection for the multimedia message centre.

Recept. in home net.—Select whether you want the

reception of the MMS messages in the home network to be

Automatic, Defer retrieval, or Off. If you select Defer retrieval, the multimedia messaging centre saves the

message. To retrieve the message later, set to Automatic.

Reception if roaming—Select how you want the MMS

messages to be retrieved outside the home network. When you are outside your home network, sending and receiving multimedia messages may cost you more. If Reception if

roaming > Automatic is selected, your phone automatically

makes an active packet data connection to retrieve the message. Select Reception if roaming > Off if you do not want to receive multimedia messages when you are outside your home network.

Allow anon. messages—Select No if you want to reject

messages coming from an anonymous sender.

Receive adverts—Define whether you want to receive

multimedia message advertisements or not.

Receive report (network service)—Select Yes if you want

the status of the sent message to be shown in the Log.

Note: Receiving a delivery report of a multimedia

message that has been sent to an e-mail address might not be possible.

Deny report sending—Select Yes if you do not want your

phone to send delivery reports of received multimedia messages.

Message validity—If the recipient of a message cannot be

reached within the validity period, the message is removed from the multimedia messaging centre. The network must support this feature. Maximum time is the maximum amount of time allowed by the network.

Tip! You may also obtain the multimedia and e-mail

settings from your service provider through a

configuration message. Contact your service provider for more information. See ‘Data and settings’ on p. 49.

E-mail

Select Messaging > Options > Settings > E-mail, or in the mailbox main view, select Options > E-mail settings, and from the following:

Mailbox in use—Select which mailbox you want to use for

sending e-mail.

Mailboxes—Opens a list of mailboxes that have been

defined. If no mailboxes have been defined, you are prompted to do so. Select a mailbox to change the settings:

Mailbox settings:

Mailbox name—Enter a descriptive name for the mailbox.

Access point in use (Must be defined)—Choose an

Internet access point (IAP) for the mailbox. See ‘Connection settings’, p. 89.

My e-mail address (Must be defined)—Enter the e-mail

address given to you by your service provider. Replies to your messages are sent to this address.

Outgoing mail server (Must be defined)—Enter the IP

address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of

Messaging

your network operator. Contact your service provider for more information.

Send message—Define how e-mail is sent from your

phone. Select Immediately for the device to connect to the mailbox when you select Send message. Select

Messaging

During next conn.—E-mail is sent when the connection

to the remote mailbox is available.

User name—Enter your user name, given to you by your

service provider.

Password:—Enter your password. If you leave this field

blank, you are prompted for the password when you try to connect to your remote mailbox.

Incoming mail server (Must be defined)—Enter the IP

address or host name of the mail server that receives your e-mail.

Mailbox type:—Defines the e-mail protocol that your

remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you are using the POP3 protocol, e-mail messages are not updated automatically in online mode. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.

Security (ports)—Used with the POP3, IMAP4, and SMTP

protocols to secure the connection to the remote mailbox.

APOP secure login (not shown if IMAP4 is selected for Mailbox type)—Used with the POP3 protocol to encrypt

the sending of passwords to the remote e-mail server while connecting to the mailbox.

User settings:

E-mails to retrieve (not shown if the e-mail protocol is set

to POP3)—Define how many new e-mails are retrieved to the mailbox.

Retrieve—Define which parts of the e-mails are retrieved: Headers only, Partially (kB), or Msgs. & attachs. (not shown

if the e-mail protocol is set to IMAP4).

Retrieve attachments (not shown if the e-mail protocol is

set to POP3)—Choose whether you want to retrieve e-mail with or without attachments.

Subscribed folders (not shown if the e-mail protocol is set

to POP3)—You can subscribe to other folders in the remote mailbox as well and retrieve content from those folders.

Send copy to self—Select Yes to save a copy of the e-mail

to your remote mailbox and to the address defined in My

e-mail address.

Include signature—Select Yes if you want to attach a

signature to your e-mail messages.

My name—Enter your own name here. Your name replaces

your e-mail address in the recipient’s phone when the recipient’s phone supports this function.

Automatic retrieval:

Header retrieval—When this function is on, messages are

retrieved automatically. You can define when, and how often, the messages are retrieved.

Activating Header retrieval may increase your call costs due to the data traffic.

Web service messages

Select Messaging > Options > Settings > Service

message. Choose whether you want to receive service

messages. If you want to set the phone to automatically activate the browser and start a network connection to retrieve content when the phone receives a service message, select Download messages > Automatically.

Cell broadcast

Check the available topics and related topic numbers with your service provider, and select Messaging > Options >

Settings > Cell broadcast to change the settings.

Reception—Select On to receive cell broadcast messages,

or Off if you do not wish to receive cell broadcast messages.

Language—All allows you to receive cell broadcast

messages in all supported languages. Selected allows you to choose in which languages you wish to receive cell

broadcast messages. If you cannot find the desired language, select Other.

Topic detection—If you select On, the phone

automatically searches for new topic numbers, and saves the new numbers without a name to the topic list. Select

Off if you do not want to save new topic numbers

automatically.

Other settings

Select Messaging > Options > Settings > Other.

Save sent messages—Choose if you want to save a copy

of every text message, multimedia message, or e-mail that you have sent to the Sent folder.

No. of saved msgs.—Define how many sent messages are

saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.

Memory in use—Choose the memory to where you want to

save your messages: Phone memory or Memory card.

Tip! If Memory card is selected, activate the offline

profile before opening the memory card slot door or removing the memory card. When the memory card is not available, messages are saved in the phone memory.

Messaging

New e-mail alerts—Choose whether you want to see the

new e-mail indications, a tone, or a note when new mail is received to the mailbox.

Messaging

Calendar

Shortcut: Press any key ( — ) in any

calendar view. A meeting entry opens, and the characters you enter are added to the Subject field.

Create calendar entries

1 Press , and select

Calendar > Options > New entry and from the

following:

Meeting—To remind you

of an appointment that has a specific date and time.

Memo—To write a general

entry for a day.

Anniversary—To remind

you of birthdays or special dates. Anniversary entries are repeated every year.

2 Fill in the fields. Use to move between fields.

Alarm (meetings and anniversary)—Select On, and press

to fill in the Alarm time and Alarm date fields.

in the day view indicates an alarm. To stop a calendar alarm, select Silence to turn off the calendar alarm

tone. The reminder text stays on the screen. Select

Stop to end the calendar alarm. Select Snooze to set

the alarm to snooze.

Repeat—Press to change the entry to be repeating

( is shown in the day view).

Repeat until—You can set an end date for the repeated

entry.

Synchronisation: Private—After synchronisation the calendar entry can

be seen only by you and it will not be shown to others with online access to view the calendar.

Public—The calendar entry is shown to others who

have access to view your calendar online.

None—The calendar entry will not be copied to your PC

when you synchronise.

3 To save the entry, select Done.

Tip! To send a calendar note to a compatible phone,

select Options > Send > Via text message, Via

multimedia, Via Bluetooth, or Via e-mail (available

only if the correct e-mail settings are in place).

Calendar

Calendar views

Tip! Select Options > Settings to change the view

Calendar

that is shown when you open the calendar or the starting day of the week.

In the month view, dates that have calendar entries are marked with a small triangle at the right bottom corner. In the week view, memos and anniversaries are placed before 8 o’clock.

Icons in the day and week views:

Memo Anniversary

There is no icon for Meeting.

To go to a certain date, select Options > Go to date, write the date, and select OK.

Press to jump to today.

Tip! You can move calendar and to-do data from

many different Nokia phones to your phone or synchronise your calendar and to-do to a compatible PC using Nokia PC Suite. See the CD-ROM supplied with the phone.

Set a calendar alarm

You can set an alarm to remind you of a meeting or anniversary. This option is not available for memos.

1 Open an entry in which you want to set an alarm, and

select Alarm > On.

2 Set the Alarm time and Alarm date. 3 Scroll down to Repeat, and press to select how

often you want the alarm to be repeated.

4 Select Done.

To delete a calendar alarm, open the entry in which you want to delete an alarm, and select Alarm > Off.

Remove calendar entries

Removing past entries in Calendar saves space in your phone memory.

To remove more than one event at a time, go to the Month view and select Options > Delete entry and one of the following:

Before date—Deletes all calendar entries that take place

before a certain date you define.

All entries—Deletes all calendar entries.

Calendar settings

To modify the Calendar alarm tone, Default view, Week

starts on, and Week view title, select Options > Settings.

Web

Various service providers maintain pages specifically designed for mobile devices. To access these pages, press

, and select Web. These pages use the wireless markup

language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and tariffs with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Shortcut: To start a connection, press and hold

in the standby mode.

Access the Web

• Save the settings that are needed to access the Web page that you want to use. See the sections ‘Receive browser settings’, p. 61 or ‘Enter the settings manually’, p. 61.

• Make a connection to the Web. See ‘Make a connection’, p. 62.

• Start browsing the pages. See ‘Browse’, p. 63.

• End the connection to the Web. See ‘End a connection’, p. 65.

Receive browser settings

Tip! Settings may be available on the Web site of a

network operator or service provider.

You may receive Web service settings in a special text message from the network operator or service provider that offers the Web page. See ‘Data and settings’, p. 49. For more information, contact your network operator or service provider.

Enter the settings manually

Follow the instructions given to you by your service provider.

1 Select Tools > Settings > Connection > Access

points, and define the settings for an access point. See

‘Connection settings’, p. 89.

2 Select Web > Options > Bookmark manager > Add

bookmark. Write a name for the bookmark and the

address of the page defined for the current access point.

Bookmarks view

Web

Glossary: A bookmark consists of a bookmark name,

Internet address, access point, and if the Web page requires, a user name and password.

Options in the bookmarks view are Open,

Download, Back to page, Bookmark manager, Mark/Unmark, Navigation options, Advanced options, Send, Find bookmark, Details, Settings, Help, and Exit.

Note: Your device may have some bookmarks

loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

Icons in the bookmark view:

The starting page defined for the default access point. If you use another default access point for browsing, the starting page is changed accordingly.

The automatic bookmarks folder contains bookmarks ( ) that are collected automatically when you browse pages. The bookmarks in this folder are automatically organised according to domain.

Any bookmark showing the title or Internet address of

the bookmark.

Add bookmarks manually

1 In the bookmarks view, select Options > Bookmark

manager > Add bookmark.

2 Start to fill in the fields. Only the Internet address must

be defined. The default access point is assigned to the bookmark if no other one is selected. Press to enter special characters such as /, ., :, and @. Press to clear characters.

3 Select Options > Save to save the bookmark.

Send bookmarks

Scroll to a bookmark, and select Options > Send > Via text

message. Press to send. It is possible to send more than

one bookmark at the same time.

Make a connection

Once you have stored all the required connection settings, you can access the pages.

1 Select a bookmark or enter the address in the field

( ). When you enter the address, matching bookmarks are shown above the field. Press to select a matching bookmark.

Options when browsing (depending on the page

you are viewing) are Open, Accept, Remove file,

Open in viewer, Open Wallet, Service options,

Bookmarks, Save as bookmark, View images,

Navigation options, Advanced options, Show

images, Send bookmark, Find, Details, Settings,

Help, and Exit.

2 Press to start to download the page.

Connection security

If the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Select Options > Details > Security to view details about the connection, encryptions status, and information about server and user authentication.

Security features may be required for some services, such as banking services. For such connections you need security certificates. For more information, contact your service provider. See also ‘Certificate management’, p. 94.

Browse

On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.

To open a link, to check boxes, and make selections, press

To go to the previous page while browsing, select Back. If

Back is not available, select Options > Navigation options > History to view a chronological list of the pages

you have visited during a browsing session. The history list is cleared each time a session is closed.

To retrieve the latest content from the server, select

Options > Navigation options > Reload.

To save a bookmark, select Options > Save as bookmark.

Tip! To access the bookmarks view while browsing,

press and hold down . To return to the browser view, select Options > Back to page.

To save a page while browsing, select Options >

Advanced options > Save page. You can save pages to

the phone memory or on a memory card, and browse them when offline. To access the pages later, press in the bookmarks view to open the Saved pages view.

To enter a new URL address, select Options > Navigation

options > Go to web address.

Web

To open a sublist of commands or actions for the currently open page, select Options > Service options.

Web

You can download items such as ringing tones, images, operator logos, themes, and video clips. Downloaded items are handled by the respective applications in your phone, for example, a downloaded image is saved in

Gallery.

Shortcut: Use to jump to the end of a page

and to the beginning of a page.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Important: Only install software from sources that

offer adequate protection against harmful software.

To download and view new Web service messages while browsing, select Options > Advanced options > Read

service msgs. (shown only if there are new messages). See

also ‘Web service messages’, p. 49.

Tip! Your browser collects bookmarks automatically

while you are browsing Web pages. The bookmarks are stored to the automatic bookmarks folder ( ) and automatically organised according to domain. See also ‘Web settings’, p. 65.

View saved pages

If you regularly browse pages containing information which does not change very often, you can save and browse them when offline. In the saved pages view you can also create folders to store your saved browser pages.

Options in the saved pages view are Open, Back to

page, Reload, Saved pages, Mark/Unmark, Navigation options, Advanced options, Details, Settings, Help,

and Exit.

To open the saved pages view, press in the bookmarks view. In the saved pages view, press to open a saved page ( ).

To save a page while browsing, select Options > Advanced

options > Save page.

To start a connection to the browser service and to download the latest version of the page, select Options >

Navigation options > Reload. The phone stays online after

you reload the page.

Download and purchase items

You can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your

phone, for example, a downloaded photo can be saved in

Gallery.

Important: Only install applications from sources

that offer adequate protection against harmful software.

1 To download the item, scroll to the link, and press .

If the item is provided free, select Accept. Once downloaded, the content is automatically opened in a suitable application. To cancel the download, select Cancel.

2 Select the appropriate option to purchase the item, for

example, ’Buy’.

3 Carefully read all the information provided.

If the online content is compatible, you can use your wallet information to make the purchase.

4 Select Options > Open E-wallet. You are prompted for

your wallet code. See ‘Create a wallet code’, p. 71.

5 Select the appropriate card category from your wallet. 6 Select Fill in. This uploads the selected wallet

information. If the wallet does not contain all information necessary for the purchase, you are requested to enter the remaining details manually.

Note: Copyright protections may prevent some

images, ringtones and other content from being copied, modified, transferred, or forwarded.

End a connection

Select Options > Advanced options > Disconnect to end the connection and view the browser page offline, or

Options > Exit to end the connection and close the

browser.

Empty the cache

The information or services you have accessed are stored in the cache memory of the phone.

Note: A cache is a memory location that is used to

store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache memory of the phone. To empty the cache, select Options > Navigation options > Clear cache.

Web settings

Select Options > Settings and from the following:

Default access point—To change the default access point,

press to open a list of available access points. See ‘Connection settings’, p. 89.

Web

Show images—To select if you want to load images while

browsing or not. If you select No, to load images later

Web

during browsing, select Options > Show images.

Text wrapping—To wrap the text when Full screen is on,

select On.

Font size—To choose the text size.

Default encoding—If text characters are not shown

correctly, you may choose another encoding according to language.

Automatic bookmarks—To disable automatic bookmark

collecting, select Off. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.

Screen size—To select what is shown when you are

browsing. Select Select. keys only or Full screen.

Search page—To define a Web page that is downloaded

when you select Navigation options > Open search page in the bookmarks view, or when browsing.

Volume—If you want the browser to play sounds

embedded on Web pages, select a volume level.

Rendering—If you want the page layout shown as

accurately as possible, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed.

Cookies—To enable or disable the receiving and sending of

cookies.

Glossary: Cookies are a means of content providers to

identify users and their preferences for frequently used content.

Java/ECMA script—To enable or disable the use of scripts.

Security warnings—To hide or show security notifications.

Conf. DTMF sending—Choose whether you want to

confirm before the phone sends DTMF tones during a call. See also ‘Options during a call’, p. 23.

Wallet > On—To open the wallet automatically when a

compatible browser page is opened. See ‘Wallet’, p. 70.

Office

Recorder

Press , and select Office > Recorder to record telephone conversations and voice memos. If you are recording a telephone conversation, both parties hear a tone every 5 seconds during recording.

To mark a task as completed, scroll to it in the To-do list,

Office

and select Options > Mark as done.

To restore a task, scroll to it in the To-do list, and select

Options > Mark as not done.

Calculator

To-do

Create a task list

Press , and select Office > To-do to write notes and maintain a task list.

To add a note, press any number key to start to write the task in the Subject field.

To set the due date for the task, scroll to the Due date field, and enter a date.

To set the priority for the To-do note, scroll to the Priority field, and press to select the priority. The priority icons are (High) and (Low). There is no icon for Normal.

To add, substract, multiply, divide, calculate square roots and percentages, press , and select Office > Calculator.

Note: This calculator has limited accuracy and is

designed for simple calculations.

To save a number in the memory (indicated by M), select

Options > Memory > Save. To retrieve a number in

memory, select Options > Memory > Recall. To clear a number in memory, select Options > Memory > Clear.

Calculate percentages

1 Enter a number for which you want to calculate a

percentage.

2 Select , , , or . 3 Enter the percentage. 4 Select .

Notes

Office

Press , and select Office > Notes to write notes. You can send notes to other compatible devices and save plain text files (TXT format) that you receive to Notes.

Converter

To convert measures such as Length from one unit (Yards) to another (Metres), press , and select Office >

Converter.

Options in Converter are Select unit/Change

currency, Conversion type, Currency rates, Help, and Exit.

Note that Converter has limited accuracy, and rounding errors may occur.

1 Scroll to the Type field, and press to open a list of

measures. Scroll to the measure you want to use, and select OK.

2 Scroll to the first Unit field, and press . Select the

unit from which you want to convert and OK. Scroll to the next Unit field, and select the unit to which you want to convert.

3 Scroll to the first Amount field, and enter the value you

want to convert. The other Amount field changes automatically to show the converted value. Press to add a decimal and for the +,

- (for temperature), and E (exponent) symbols.

Set base currency and exchange rates

Tip! To change the conversion order, enter the value

in the second Amount field. The result is shown in the first Amount field.

Before you can make currency conversions, you need to choose a base currency and add exchange rates. The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies.

1 Select Converter > Options > Currency rates. A list of

currencies opens, and you can see the current base currency at the top.

2 To change the base currency, scroll to the currency, and

select Options > Set as base curr.

Tip! To rename a currency, go to the currency rates

view, scroll to the currency, and select Options >

Rename currency.

3 Add exchange rates. Scroll to the currency, and enter a

new rate, that is, how many units of the currency equal one unit of the base currency you have selected.

After you have inserted all the necessary exchange rates, you can make currency conversions.

Note: When you change base currency, you must

enter the new rates because all previously set exchange rates are set to zero.

Office

My own

Go to—add shortcuts

Default shortcuts:

Opens Calendar Opens Inbox Opens Notes

To store shortcuts (links to your favourite images, notes, bookmarks, and so on), press , and select My own > Go

to. Shortcuts are added only from the individual

applications, for example, Gallery. Not all applications have this function.

1 Select an item from an application to which you want

to add a shortcut.

2 Select Add to 'Go to'. A shortcut in Go to is

automatically updated if you move the item to which it is pointing (for example, from one folder to another). To change the identifier in the lower left corner of the shortcut icon, select Options > Shortcut icon.

Delete a shortcut

Select the shortcut, and press . The default shortcuts

Calendar, Inbox, and Notes cannot be deleted.

When you remove an application or a document which has a shortcut in Go to, the shortcut icon of the removed item is dimmed in the Go to view. The shortcut can be deleted next time you start Go to.

Wallet

Press , and select My own > Wallet. Wallet provides you with a storage area for your personal information, such as credit and debit card numbers, addresses, and other useful data (for example, user names and passwords).

The information stored in Wallet can be retrieved while browsing to automatically fill in online forms on browser pages (for example, when the service asks for credit card details). Data in Wallet is encrypted and protected with a wallet code that you define.

Wallet automatically closes after 5 minutes. Enter the

wallet code to regain access to the contents. You can change this automatic time-out period if required. See ‘Wallet settings’, p. 72.

Options in the Wallet main view are Open, Settings,

Help, and Exit.

Create a wallet code

Each time you open Wallet, you are prompted for a wallet code. Enter the code that you have created, and select OK.

When you open Wallet for the first time, you must create your own wallet code:

1 Enter a code of your choice (4—10 alphanumeric

characters), and select OK.

2 You are prompted to verify the code. Enter the same

code, and select OK. Do not give your wallet code to anyone else.

If you enter the wallet code incorrectly on three consecutive occasions, Wallet is blocked for 5 minutes. The block time increases if further incorrect wallet codes are entered.

If yo u f or ge t y ou r w alle t cod e, you must reset the code, and you will lose all information stored in Wallet. ‘Reset the wallet and wallet code’, p. 73.

Store personal card details

1 Select the Cards category from the main Wallet menu,

and press .

2 Select a type of card from the list, and press .

Payment cards—Credit and debit cards. Loyalty cards—Membership and store cards.

Online acc. cards—Personal user names and passwords

to online services.

Address cards—Basic contact details for home or the

office.

User info cards—Customised personal preferences for

online services.

3 Select Options > New card. An empty form opens. 4 Fill in the fields, and select Done.

You can also receive card information directly to the phone from a card issuer or service provider (if they offer this service). You will be notified which category the card belongs to. Save or discard the card. You can view and rename a saved card, but you cannot edit it.

You can open, edit, or delete the fields in the card. Any changes will be saved upon exiting.

Create personal notes

Personal notes are a means of storing sensitive information, for example, a bank account number. You can access the data in a personal note from the browser. You can also send the note as a message.

1 Select the Personal notes category from the main

Wallet menu, and press .

2 Select Options > New note. An empty note opens. 3 Press — to start writing. Press to

clear characters.

My own

4 Add a name to the memo and select Done to save.

Create a wallet profile

My own

Once you have stored your personal details, you can combine them into a wallet profile. You can use a wallet profile to retrieve wallet data from different cards and categories to the browser, for example, when you are filling in a form.

1 Select the Wallet profiles category from the main

wallet menu, and press .

2 Select Options > New profile. A new wallet profile

form opens.

3 Fill in the fields or select an option from the listed

items:

Profile name—Choose and enter a name for the profile. Payment card—Select a card from the list. Loyalty card—Select a card from the list. Online access card—Select a card from the list. Shipping address—Select an address from the list. Billing address—By default, this is the same as the

shipping address. If you require a different address, select one from the address card category.

User info card—Select a card from the list. Receive e-receipt—Select a destination from the list. Deliver e-receipt—Select To pho. & e-mail, To e-mail,

or To phone.

RFID sending—Set to On or Off. Defines whether or not

your unique phone identification is sent with the wallet profile.

4 Select Done.

Example: By uploading your payment card details you

do not need to enter the card number and expiry date each time you need them (depending on the content being browsed). Also, you can retrieve your user name and password stored as an access card when connecting to a mobile service that requires authentication.

View ticket details

You can receive notifications of tickets purchased online through the browser. Received notifications are stored in the wallet. To view the notifications:

1 Select the Tickets category from the main Wallet

menu, and press .

2 Select Options > View. None of the fields within the

notification can be modified.

Wallet settings

From the main Wallet menu, select Options > Settings and the following:

Wallet code—Change your wallet code. You are prompted

to enter the current code, create a new code, and verify the new code.

RFID—Set the phone ID code, type, and sending options.

Automatic close—Change the automatic time-out period

(1—60 minutes). After the time-out period has elapsed, the wallet code must be re-entered to gain access to the contents.

Reset the wallet and wallet code

This operation erases all contents of Wallet.

To reset both the contents of Wallet and the wallet code:

1 Enter *#7370925538# in the standby mode. 2 Enter the phone lock code, and select OK. See

‘Security’, p. 92.

When opening Wallet again, you must enter a new wallet code. See ‘Create a wallet code’, p. 71.

My own

IM—Instant messaging (chat)

Press , and select My own > IM.

Instant messaging is a network service which allows you to converse with other people using instant messages and join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to once you have registered to an IM service.

Options in the IM main view are Open, Login/

Logout, Settings, Help, and Exit.

Note: Check the availability of chat services,

IM—Instant messaging (chat)

pricing, and tariffs with your network operator and/or service provider. Service providers will also give you instructions on how to use their services.

Receive IM settings

Tip: To log in automatically when you start IM,

without having to enter your user ID and password each time, select Options > Settings > Server

settings > IM login type > Automatic.

You must save the settings to access the service that you want to use. You may receive the settings in a special text message, a so-called smart message, from the network operator or service provider that offers the IM service. See

‘Data and settings’, p. 49. You can also enter the settings manually. See ‘Chat server settings’, p. 79.

Connect to an IM server

1 Open IM to have your phone connect to the IM server

in use. To change the IM server in use and save new IM servers, see ‘Chat server settings’, 79.

2 Enter your user ID and password, and press to log

in. You obtain the user ID and password for the IM server from your service provider. You can select Cancel to stay offline; to log in to the IM server later, select Options > Login. You cannot send or receive messages while you are offline.

3 To log out, select Options > Logout.

Modify your IM settings

Select Options > Settings > IM settings:

Use screen name (shown only if IM groups are supported

by the server)—Select OK and enter a nickname (up to10 characters).

IM presence—To allow others to see if you are online,

select Active for all.

Allow messages from—To allow messages from all, select All.

Allow invitations from—To allow invitations only from your

IM contacts, select IM contacts only. IM invitations are sent by IM contacts who want you to join their groups.

Msg. scrolling speed—To select the speed at which new

messages are displayed.

Sort IM contacts—To sort your IM contacts Alphabetically

or By online status.

Availability reloading—To choose how to update

information about whether your IM contacts are online or offline, select Automatic or Manual.

Search for IM groups and users

To search for groups, in the IM groups view, select

Options > Search. You can search by Group name, Topic,

and Members (user ID).

To search for users, in the IM contacts view, select

Options > New IM contact > Search. You can search by User's name, User ID, Phone number, and E-mail address.

Join and leave an IM group

To join an IM group that you have saved, scroll to the group, and press .

To join an IM group not on the list, but for which you know the group ID, select Options > Join new group. Enter the group ID, and press .

To leave the IM group, select Options > Leave IM group.

Chat

Once you have joined an IM group, you can view the messages that are exchanged there, and send your own messages.

Options while chatting are Send, Send private

msg., Reply, Forward, Insert smiley, Send invitation, Leave IM group, Add to banned list, Group, Record convers./Stop recording, Help, and Exit.

To send a message, write the message in the message editor field, and press .

To send a private message to a participant, select Options > Send private msg., select the recipient, write the message, and press .

To reply to a private message sent to you, select the message, and select Options > Reply.

IM—Instant messaging (chat)

To invite IM contacts who are online to join the IM group, select Options > Send invitation, select the contacts you want to invite, write the invitation message, and press

Record chats

Options in the recorded chats view are Open,

Delete, Send, Mark/Unmark, Login/Logout, Settings, Help, and Exit.

To record to a file the messages that are exchanged during a conversation or while you are joined in a IM group, select Options > Record convers., enter a name for the conversation file, and press . To stop recording, select

IM—Instant messaging (chat)

Options > Stop recording.

The recorded conversation files are automatically saved in the Recorded chats.

To view the recorded chats, in the main view, select

Recorded chats, select the conversation, and press .

View and start conversations

Go to the Conversations view to see a list of the individual conversation participants that you have an ongoing conversation with.

To view a conversation, scroll to a participant, and press

Options when viewing a conversation are Send, Add

to IM contacts, Insert smiley, Forward, Record convers./Stop recording, Blocking options, End conversation, Help, and Exit

To continue the conversation, write your message, and press .

To return to the conversations list without closing the conversation, press Back.

To close the conversation, select Options > End

conversation. Ongoing conversations are automatically

closed when you exit IM.

To start a new conversation, select Options > New

conversation:

Select recipient—To see a list of your chat contacts that

are currently online. Scroll to the contact that you want to start a conversation with, and press .

Glossary: The user ID is provided by the service

provider to those who register to this service.

Enter user ID—To enter the user ID of the user you want to

start a conversation with, and press .

To save a conversation participant to your IM contacts, scroll to the participant, and select Options > Add to IM

contacts.

To send automatic replies to incoming messages, select

Options > Set auto reply on. Enter the text, and press Done. You can still receive messages.

To prevent receiving messages from certain participants, select Options > Blocking options, and select from the following:

Add to blocked list—To block messages from the currently

selected participant.

Add ID to list manually—To enter the user ID of the

participant. Enter the ID, and press .

View blocked list—To see the participants whose

messages are being blocked.

Unblock—To select the user that you want to remove from

the blocked list. Press .

IM contacts

Go to the IM contacts to retrieve chat contact lists from the server, or to add a new chat contact to a contact list. When you log in to the server, the previously used chat contact list is retrieved from the server automatically.

Options in the IM contacts view are Open

conversation, Open, Change contact list, Reload user availab., Belongs to groups, New IM contact, Move to other list, Edit, Delete, Switch tracking on, Blocking options, Login/Logout, Settings, Help, and Exit.

To create a new contact, select Options > New IM

contact > Enter manually. Fill in the Nickname and User ID fields, and select Done.

To move a contact from a list on the server to the retrieved list, select Options > New IM contact > Move from other

list.

To change the chat contact list, select Options > Change

contact list.

Select from the following options:

Open conversation—To start a new conversation or

continue an ongoing conversation with the contact.

Switch tracking on—To have the phone notify you every

time the chat contact goes online or offline.

Belongs to groups—To see which groups the chat contact

has joined.

Reload user availab.—To update information about

whether the contact is online or offline. The online status is shown by an indicator next to the contact name. This option is not available if you have set the Availability

reloading to Automatic in IM settings.

IM—Instant messaging (chat)

Manage IM groups

Options in the IM groups view are Open, Join new

group, Create new group, Leave IM group, Group, Search, Login/Logout, Settings, Help, and Exit.

Go to the IM groups view to see a list of the IM groups that you have either saved or are currently joined to.

Scroll to a group, select Options > Group and one of the following:

Save—To save an unsaved group that you are currently

joined to.

View participants—To see who are currently joined to the

group.

IM—Instant messaging (chat)

Details—To see the group ID, topic, participants,

administrators of the group (shown only if you have the editing rights), the list of blocked participants (shown only if you have the editing rights), and whether private conversations are allowed in the group.

Settings—To view and edit the chat group settings. See

‘Create a new IM group’, p 78.

Administrate an IM group

Create a new IM group

Select IM groups > Options > Create new group. Enter the settings for the group.

You can edit the settings for an IM group if you have administrator rights to the group. The user who creates a group is automatically given administrator rights to it.

Group name, Group topic, and Welcome note—To add

details that the participants see when they join the group.

Group size—To define the maximum number of members

allowed to join the group.

Allow search—To define if others can find the chat group

by searching.

Editing rights—To define the chat group participants to

whom you want to give rights to invite contacts to join the IM group and edit the group settings.

Group members—See ‘Add and remove group members’, p.

79.

Banned list—Enter the participants that are not allowed to

join the IM group.

Allow private msgs.—To allow messaging between

selected participants only.

Group ID—The group ID is created automatically and

cannot be changed.

Add and remove group members

To add members to a group, select IM groups, scroll to an IM group, and select Options > Group > Settings > Group

members > Selected only or All.

To remove a member from the IM group, scroll to the member, and select Options > Remove. To remove all members, select Options > Remove all.

Server name—Enter the name for the chat server.

Access point in use—Select the access point you want to

use for the server.

Web address—Enter the URL address of the IM server.

User ID—Enter your user ID.

Password—Enter your login password.

Chat server settings

Select Options > Settings > Server settings. You may receive the settings in a special text message from the network operator or service provider that offers the chat service. You obtain the user ID and password from your service provider when you register to the service. If you do not know your user ID or password, contact your service provider.

To change the IM server to which you wish to connect, select Default server.

To add a new server to your list of IM servers, select

Servers > Options > New server. Enter the following

settings:

IM—Instant messaging (chat)

Connectivity

Bluetooth technology enables wireless connections to send images, video clips, music and sound clips, and notes, or to connect wirelessly to compatible devices with Bluetooth technology such as computers. Since devices with Bluetooth technology communicate using radio waves, your phone and the other device do not need to be in direct line-of-sight. The two devices only need to be within a maximum of 10 metres of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 1.2 supporting the following profiles: Generic Access Profile, Serial Port Profile, Bluetooth Printing Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File Transfer Profile, and Basic Imaging Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Bluetooth connection

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Features that use Bluetooth technology, or allow such features to run in the background while using other features, increase the demand on battery power and reduces the battery life.

Bluetooth connection settings

Press , and select Connect. > Bluetooth.

Enter the following:

Bluetooth—Set to On or Off.

My phone's visibility > Shown to all—Your phone can be

found by other devices with Bluetooth technology or

Hidden—Your phone cannot be found by other devices.

My phone's name—Define a name for your phone. After

you have set a Bluetooth connection and changed My

phone's visibility to Shown to all, your phone and this

name can be seen by other users with devices using Bluetooth technology.

Send data using a Bluetooth connection

There can be only one active Bluetooth connection at a time.

1 Open an application where the item you wish to send is

stored. For example, to send an image to another compatible device, open Gallery.

2 Select the item, for example, an image, and select

Options > Send > Via Bluetooth.

Tip! When searching for devices, some devices

may show only the unique addresses (device

addresses). To find the unique address of your

phone, enter the code *#2820# in the standby

mode.

The phone starts to search for devices within range. Devices with Bluetooth technology that are within range start to appear on the display one by one. You can see a device icon, the name of the device, the device type, or a short name.

Tip! If you have searched for devices earlier, a list

of the devices that were found previously is shown

first. To start a new search, select More devices. If

you switch off the phone, the list is cleared.

To interrupt the search, press Stop. The device list freezes, and you can start to form a connection to one of the devices already found.

3 Select the device with which you want to connect. 4 If the other device requires pairing before data can be

transmitted, a tone sounds and you are asked to enter a passcode. Create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. The passcode is used only once.

Tip! To send text using a Bluetooth connection (instead of text messages), go to Notes, write the text, and select Options > Send > Via Bluetooth.

After pairing, the device is saved to the paired devices view.

Glossary: Pairing means authentication. The users of the

devices with Bluetooth technology should agree what the passcode is and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a factory-set passcode.

When the connection has been established, the note

Sending data is shown.

The Sent folder in Messaging does not store messages sent using a Bluetooth connection.

Icons for different devices:

Computer Phone Audio or video

Connectivity

Headset Other

Check the status of the Bluetooth connection

• When is shown in the standby mode, a Bluetooth

Connectivity

connection is active.

• When is blinking, your phone is trying to connect to the other device.

• When is shown continuously, the Bluetooth connection is active.

Pair devices

Tip! To define a short name (nickname or alias), scroll

to the device, and select Options > Assign short name in the paired devices view. This name helps you to recognise a certain device during device search or when a device requests a connection.

Paired devices are easier to recognise; they are indicated by in the device search. In the Bluetooth main view, press to open the paired devices view ( ).

To pair with a device, select Options > New paired

device. The phone starts a device search. Select the

device. Exchange passcodes. See step 4 in ‘Send data using a Bluetooth connection’, p. 81.

To cancel a pairing, scroll to the device, and select

Options > Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device and

delete the pairing with that device, pairing is removed and the connection is disconnected immediately.

To set a device to be authorised or unauthorised, scroll to a device, and select from the following options:

Set as authorised—Connections between your phone and

this device can be made without your knowledge. No separate acceptance or authorisation is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.

indicates authorised devices in the paired devices view.

Set as unauthorised—Connection requests from this

device must be accepted separately every time.

Receive data using a Bluetooth connection

When you receive data using a Bluetooth connection, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messaging. Messages received using a Bluetooth connection are indicated by . See ‘Inbox—receive messages’, p. 48.

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select Bluetooth >

Off.

PC connections

You can use your phone with a variety of PC connectivity and data communications applications. With Nokia PC Suite you can, for example, synchronise contacts, calendar and To-do notes between your phone and a compatible PC.

Always create the connection from the PC to synchronise with the phone.

For further information on how to install Nokia PC Suite (compatible with Windows 2000 and Windows XP), see the User Guide for Nokia PC Suite and the Nokia PC Suite help in the ‘Install’ section on the CD-ROM.

CD-ROM

The CD-ROM should launch after you have inserted it into the CD-ROM drive of a compatible PC. If not, proceed as follows: Open Windows Explorer, right-click the CD-ROM drive where you inserted the CD-ROM, and select Autoplay.

Your phone as a modem

You can use your phone as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using a Bluetooth connection or a data cable. Detailed installation instructions can be found in the User Guide for Nokia PC Suite in Modem options on the CD-ROM.

Connection manager

You may have multiple data connections active at the same time when you are using your phone in GSM networks. Press , and select Connect. > Conn. mgr. to view the status of multiple data connections, view details on the amount of data sent and received, and end connections. When you open Conn. mgr., you can see the following:

• Open data connections: data calls ( ) and packet data connections ( )

• The status of each connection

• The amount of data uploaded and downloaded for each connection (shown for packet data connections only)

• The duration of each connection (shown for data calls only)

Connectivity

Note: The actual time invoiced for calls by your

service provider may vary, depending on network features, rounding off for billing, and so forth.

To end a connection, scroll to a connection, and select

Options > Disconnect.

Connectivity

To close all currently open connections, select Options >

Disconnect all.

View data connection details

Options in Conn. mgr. main view when there are

one or more connections are Details, Disconnect,

Disconnect all, Help, and Exit.

To view the details of a connection, scroll to a connection, and select Options > Details.

Name—The name of the Internet access point (IAP) in use,

or the modem connection name if the connection is a dial-up connection.

Bearer—The type of data connection: Data call, High sp. GSM, or Packet data.

Status—The current status of the connection: Connecting, Conn.(inact.), Conn.(active), On hold, Disconnctng., or Disconnected.

Received—The amount of data, in bytes, received to the

phone.

Sent—The amount of data, in bytes, sent from the phone.

Duration—The length of time that the connection has been

open.

Speed—The current speed of both sending and receiving

data in kilobytes per second.

Name—Access point name used.

Dial-up—The dial-up number used.

Shared (not shown if the connection is not shared)—The

number of applications using the same connection.

Remote synchronisation

Press , and select Connect. > Sync. Sync enables you to synchronise your calendar and contacts with various calendar and address book applications on a compatible computer or on the Internet.

The synchronisation application uses SyncML technology for synchronisation. For information on SyncML compatibility, contact the supplier of the calendar or address book application you want to synchronise your phone data with.

You may receive syncronisation settings in a special text message. See ‘Data and settings’, p. 49.

Create a new synchronisation profile

Options in the Sync main view are Synchronise, New

sync profile, Edit sync profile, Delete, View log, Set as default, Help, and Exit.

1 If no profiles have been defined, the phone asks if you

want to create a new profile. Select Yes. To create a new profile in addition to existing ones, select Options > New sync profile. Choose whether you want to use the default setting values or copy the values from an existing profile to be used as the basis for the new profile.

2 Define the following:

Sync profile name—Write a descriptive name for the

profile.

Data bearer—Select the connection type: Web or Bluetooth. Access point—Select an access point to use for the data

connection.

Host address—Contact your service provider or system

administrator for the correct values.

Port—Contact your service provider or system

administrator for the correct values.

User name—Your user ID for the synchronisation server.

Contact your service provider or system administrator for your correct ID.

Password—Write your password. Contact your service

provider or system administrator for the correct value.

Allow sync requests—Select Yes if you want to allow

the server to start a synchronisation.

Accept all sync reqs.—Select No if you want the phone

to ask you before a synchronisation initialised by the server is started.

Network authentic. (shown only if Data bearer is set to Web)—Select Yes to enter a network user name and

password. Press to view the user name and password fields.

3 Press to select: Contacts, Calendar, or Notes.

• Select Yes if you want to synchronise the selected

database.

• In Remote database, enter the correct path to the

remote contacts, calendar, or notes database on the server.

• In Synchronisation type, select the synchronisation

type: Normal (two-way synchronisation), To server

only, or To phone only.

4 Press Back to save the settings and return to the main

view.

Synchronise data

In the Sync main view, you can see the different synchronisation profiles and the kind of data to be synchronised.

Connectivity

1 Select a synchronisation profile and Options >

Synchronise. The status of the synchronisation is

shown at the bottom of the screen. To cancel synchronisation before it finishes, press

Cancel.

2 You are notified when the synchronisation is

Connectivity

complete. After synchronisation is complete, select

Options > View log to open a log file showing the

synchronisation status (Complete or Incomplete) and how many calendar or contact entries have been added, updated, deleted, or discarded (not synchronised) in the phone or on the server.

Device manager

Press , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your phone.

To connect to a server and receive configuration settings for your phone, select Options > Start configuration.

To allow or deny receiving of configuration settings from a service provider, select Options > Enable config. or Disable

config..

Server profile settings

Contact your service provider for the correct settings.

Server name—Enter a name for the configuration server.

Server ID—Enter the unique ID to identify the configuration

server.

Server password—Enter a password to identify your phone

to the server.

Session mode— Select Bluetooth or Web.

Access point—Select an access point to be used when

connecting to the server.

Host address—Enter the URL address of the server.

Port—Enter the port number of the server.

User name and Password—Enter your user name and

password.

Allow configuration—To receive configuration settings

from the server, select Yes.

Auto-accept all reqs.—If you want the phone to ask for

confirmation before accepting a configuration from the server, select No.

Tools

Settings

To change settings, press , and select

Tools > Settings. Scroll to a setting group, and press

to open it. Scroll to a setting you want to change, and press

Phone settings

General

Phone language—Changing the language of the display

texts in your phone also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the phone restarts.

Changing the settings for Phone language or Writing

language affects every application in your phone, and the

change remains effective until you change these settings again.

Tools

Writing language—Changing the language affects the

characters and special characters available when writing text and the predictive text dictionary used.

Dictionary—You can set the predictive text input On or Off

for all editors in the phone. The predictive text dictionary is not available for all languages.

Welcome note or logo—The welcome note or logo is

displayed briefly each time you switch on the phone. Select None to disable the Welcome note or logo, Text to write a welcome note (up to 50 letters), or Image to select a photo or picture from Gallery.

Orig. phone settings—You can reset some of the settings

to their original values. To do this, you need the lock code. See ‘Security’, ‘Phone and SIM’, p. 93. After resetting, the phone may take a longer time to power on. Documents and files are unaffected.

Standby mode

Active standby—Use shortcuts to applications in the

standby mode. See ‘Active standby mode’, p. 15

Left selection key—To assign a shortcut to the left

selection key ( ) in the standby mode, select an application from the list.

Right selection key—To assign a shortcut to the right

selection key ( ) in the standby mode, select an

Tools

application from the list.

You can also assign keypad shortcuts for the different presses of the scroll key, by selecting an application from the list. The scroll key shortcuts are not available if the active standby is on.

Operator logo—This setting is visible only if you have

received and saved an operator logo. You can choose if you want the operator logo to show or not.

Display

Brightness—You can change

the brightness of the display to lighter or darker. The brighness of the display is automatically adjusted according to the environment.

Screen saver timeout—The

screen saver is activated when the timeout period is over.

Light time-out—Select a timeout after which the

backlight is dimmed. The backlight will switch off approximately 30 seconds after dimming.

Call settings

Send my caller ID (network service)—You can set your

phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network).

Call waiting (network service)—If you have activated call

waiting, the network notifies you of a new incoming call while you have a call in progress. Select Activate to request the network to activate call waiting, Cancel to request the network to deactivate call waiting, or Check

status to check if the function is active or not.

Reject call with SMS—Select Yes to send a text message to

a caller informing why you could not answer the call. See ‘Answer or reject a call’, p. 22.

Message text—Write a text to be sent in a text message

when you reject a call.

Tip! To change the settings for call diverting, press

, and select Tools > Settings > Call divert. See ‘Call

diverting’, p. 95.

Automatic redial—Select On, and your phone makes a

maximum of ten attempts to connect the call after an unsuccessful call attempt. To stop automatic redialling press .

Summary after call—Activate this setting if you want the

phone to briefly display the approximate duration of the last call.

Speed dialling—Select On, and the numbers assigned to

the speed dialling keys ( - ) can be dialled by pressing and holding the key. See also ‘Speed dial a phone number’, p. 21.

Anykey answer—Select On, and you can answer an

incoming call by briefly pressing any key, except ,

, , and .

Line in use (network service)—This setting is shown only if

the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode.

Tip! To switch between the phone lines, press and

hold in the standby mode.

Line change (network service)—To prevent line selection,

select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

Connection settings

Tools

Data connections and access points

Your phone supports packet data connections ( ), such as GPRS in the GSM network.

Glossary: General packet radio service (GPRS) uses

packet data technology where information is sent in short packets of data over the mobile network.

To establish a data connection, an access point is required. You can define different kinds of access points, such as:

• MMS access point to send and receive multimedia messages

• Access point for the Web application to view WML or XHTML pages

• Internet access point (IAP) to send and receive e-mail

Check the kind of access point you need with your service provider for the service you wish to access. For availability and subscription to packet data connection services, contact your network operator or service provider.

Packet data connections in GSM networks

When you use your phone in GSM networks, multiple data connections can be active at the same time, access points can share a data connection, and data connections remain

active during voice calls. To check the active data connections, see ‘Connection manager’, p. 83.

Tools

The following indicators may be displayed below the signal indicator, depending on which network you use:

GSM network, packet data is available in the network.

GSM network, packet data connection is active, data is

being transferred.

GSM network, multiple packet data connections are

active.

GSM network, packet data connection is on hold. (This

can happen during a voice call, for example.)

Receive access point settings

You may receive access point settings in a text message from a service provider, or you may have preset access point settings in your phone. See ‘Data and settings’, p. 49.

To create a new access point, select Tools > Settings >

Connection > Access points.

An access point may be protected ( ) by your network operator or service provider. Protected access points cannot be edited or deleted.

Access points

Options in the Access points list are Edit, New

access point, Delete, Help, and Exit.

Follow the instructions given to you by your service provider.

Connection name—Give a descriptive name for the

connection.

Data bearer—Depending on what data connection you

select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.

Options when editing access point settings are

Change, Advanced settings, Help, and Exit.

To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.

Access point name (for packet data only)—The access

point name is needed to establish a connection to the packet data network. You obtain the access point name from your network operator or service provider.

Tip! See also ‘Receive MMS and e-mail settings’, p. 47,

‘E-mail’, p. 55, and ‘Access the Web’, p. 61.

User name—The user name may be needed to make a data

connection, and is usually provided by the service provider. The user name is often case-sensitive.

Prompt password—If you must enter a new password

every time you log in to a server, or if you do not want to save your password in the phone, choose Yes.

Password—A password may be needed to make a data

connection, and is usually provided by the service provider. The password is often case-sensitive.

Authentication—Select Normal or Secure.

Homepage—Depending on what you are setting up, write

the Web address or the address of the multimedia messaging centre.

Select Options > Advanced settings to change the following settings:

Network type—Select the Internet protocol type to use: IPv4 or IPv6.

Phone IP address—Enter the IP address of your phone.

Name servers—In Primary name server:, enter the IP address

of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.

Glossary: The domain name service (DNS) is an

Internet service that translates domain names such as

www.nokia.com

Proxy serv. address—Define the address for the proxy

server.

into IP addresses like 192.100.124.195.

Proxy port number—Enter the proxy port number.

Packet data

The packet data settings affect all access points using a packet data connection.

Packet data conn.—If you select When available and you

are in a network that supports packet data, the phone registers to the packet data network. Also, starting an active packet data connection is quicker (for example, to send and receive e-mail). If you select When needed, the phone uses a packet data connection only if you start an application or action that needs it. If there is no packet data coverage and you select When available, the phone periodically tries to establish a packet data connection.

Access point—The access point name is needed to use

your phone as a packet data modem to your computer.

Configurations

You may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your SIM or USIM card. You can save these settings to your phone, view, or delete them in Configurations.

Tools

Date and time

Tools

See ‘Clock settings’, p. 16.

See also the language settings in ‘General’, p. 87.

Security

Phone and SIM

PIN code request—When active, the code is requested

each time the phone is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See ‘Glossary of PIN and lock codes’, p. 93.

PIN code, PIN2 code, and Lock code—You can change the

PIN code, PIN2 code, and lock code. These codes can only include the numbers from 0 to 9. See ‘Glossary of PIN and lock codes’, p. 93.

Avoid using access codes similar to the emergency numbers to prevent accidental dialling of the emergency number.

If you forget any of these codes, contact your service provider.

Autolock period—You can set an autolock period, a time-

out after which the phone automatically locks and can be used only if the correct lock code is entered. Enter a number for the time-out in minutes, or select None to turn off the autolock period.

To unlock the phone, enter the lock code.

Note: When the phone is locked, calls in offline

profile to certain emergency numbers programmed into your phone are still possible.

Tip! To lock the phone manually, press . A list of

commands opens. Select Lock phone.

Lock if SIM changed—You can set the phone to ask for the

lock code when an unknown SIM card is inserted into your phone. The phone maintains a list of SIM cards that are recognised as the owner’s cards.

Fixed dialling—You can restrict calls and text messages

from your phone to selected phone numbers, if supported by your SIM card. You need the PIN2 code for this function. To view the list of fixed dialling numbers, press , and select Tools > Settings > Security > Phone and SIM > Fixed

dialling. To add new numbers to the fixed dialling list,

select Options > New contact or Add from Contacts. When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message centre

number and the recipient’s phone number must be included on the fixed dialling list.

Options in the Fixed dialling view are Open, Call,

Activ. fixed dialling/Deact. fixed dialling, New contact, Edit, Delete, Add to Contacts, Add from Contacts, Find, Mark/Unmark, Help, and Exit.

Note: When security features that restrict calls are

in use (such as Call barring, Closed user group, and

Fixed dialling) calls still may be possible to the official

emergency numbers programmed into your phone.

Closed user group (network service)—You can specify a

group of people to whom you can call and who can call you.

Confirm SIM services (network service)—You can set the

phone to display confirmation messages when you are using a SIM card service.

Glossary of PIN and lock codes

Personal identification number (PIN) code—This code protects your SIM card against unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the PIN code is blocked, and you need to unblock it before you can use the SIM card again. See the information about the PUK code in this section.

UPIN code—This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones. The UPIN code protects the USIM card against unauthorised use.

PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your phone.

Lock code—This code (5 digits) can be used to lock the phone to avoid unauthorised use. The factory setting for the lock code is 12345. To avoid unauthorised use of your phone, change the lock code. Keep the new code secret and in a safe place separate from your phone.

Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your phone.

UPUK code—This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your phone.

Wallet code—This code is required to use the wallet services. See ‘Wallet’, p. 70.

Tools

Certificate management

Digital certificates do not guarantee safety; they are used

Tools

to verify the origin of software.

In the certificate management main view, you can see a list of authority certificates that are stored in your phone. Press to see a list of personal certificates, if available.

Options in the certificate management main view

are Certificate details, Delete, Trust settings,

Mark/Unmark, Help, and Exit.

Glossary: Digital certificates are used to verify the

origin of the XHTML or WML pages and installed software. However, they can only be trusted if the origin of the certificate is known to be authentic.

Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.

Important: Even if the use of certificates makes the

risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct,

authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If

Expired certificate or Certificate not valid yet is shown

even if the certificate should be valid, check that the current date and time in your phone are correct.

View certificate details—check authenticity

You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.

You are notified on the phone display if the identity of the server is not authentic or if you do not have the correct security certificate in your phone.

To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:

• Certificate not trusted—You have not set any

application to use the certificate. See ‘Change the trust settings’, p. 95.

• Expired certificate—The period of validity has ended

for the selected certificate.

• Certificate not valid yet—The period of validity has

not yet begun for the selected certificate.

• Certificate corrupted—The certificate cannot be used.

Contact the certificate issuer.

Change the trust settings

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

Scroll to an authority certificate, and select Options >

Trust settings. Depending on the certificate, a list of the

applications that can use the selected certificate is shown. For example:

• Symbian installation: Yes—The certificate is able to

certify the origin of a new Symbian operating system application.

• Internet: Yes—The certificate is able to certify servers.

• App. installation: Yes—The certificate is able to certify

the origin of a new Java application.

• Online certif. check—Select to check the online

certificates before installing an application.

Select Options > Edit trust setting to change the value.

Call diverting

Call divert allows you to divert your incoming calls. For

details, contact your service provider.

1 Press , and select Tools > Settings > Call divert.

2 Select the desired divert option. To divert calls when

your number is busy or when you reject incoming calls, select If busy.

3 Set the divert option on (Activate) or off (Cancel), or

check whether the option is activated (Check status). Several divert options can be active at the same time.

When all calls are diverted, is shown in the standby mode.

Call barring and call diverting cannot be active at the same time.

Call barring (network service)

Call barring allows you to restrict the calls that you make

or receive with the phone. To change the settings, you need the barring password from your service provider. Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.

Call barring and Call divert cannot be active at the same

time.

When calls are barred, calls still may be possible to certain official emergency numbers.

Tools

Network

Tools

Operator selection—Select Automatic to set the phone

to search for and select one of the available networks, or

Manual to manually select the network from a list of

networks. If the connection to the manually selected network is lost, the phone sounds an error tone and asks you to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your phone.

Glossary: A roaming agreement is an agreement

between two or more network service providers to enable the users of one service provider to use the services of other service providers.

Cell info display—Select On to set the phone to indicate

when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.

Enhancements

A car kit is connected. The headset is unavailable, or a Bluetooth connection

to a headset is lost.

Select Headset, Carkit, Bluetooth handsfree, or Loopset and the following options are available:

Default profile—To set the profile that you want activated

each time you connect a certain enhancement to your phone. See ‘Set tones’, p. 12.

Automatic answer—To set the phone to answer an

incoming call automatically after 5 seconds. If the Ringing type is set to Beep once or Silent, automatic answer is disabled.

Voice commands

You can use voice commands to control your phone. You record voice commands in the same way as voice tags. See ‘Add a voice tag’, p. 28.

Press , and select Tools > Voice com.

Indicators shown in the standby mode:

A headset, music stand, or Bluetooth wireless

technology device is connected.

A loopset is connected.

Add a voice command to an application

You can have only one voice command per application.

1 Select the application to which you want to add a voice

command.

To add a new application to the list, select Options >

New application.

2 Select Options > Add voice command. See ‘Add a

voice tag’, p. 28.

Application manager

Press , and select Tools > Manager. You can install two types of applications and software to your phone:

• Downloadable Java™ MIDP 2.0, CLDC 1.1 applications, and 3D API (JSR-184).

• Other applications and software suitable for the Symbian operating system ( ). The installation files have the SIS extension. Only install software specifically designed for your Nokia 6681 device.

Installation files may be transferred to your phone from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using a Bluetooth connection. You can use Nokia Application Installer in Nokia PC Suite to install an application to your phone or a memory card. If you use Microsoft Windows Explorer to transfer a file, save the file to a memory card (local disk).

Install applications and software

Application icons are as follows:

SIS application Java application Application is not fully installed. Application is installed on the memory card.

Important: Only install applications from sources

that offer adequate protection against harmful software.

Before installation, do the following:

To view the application type, version number, and the supplier or manufacturer of the application, select

Options > View details.

To display the security certificate details of the application, select Options > View certificate. See ‘Certificate management’, p. 94.

If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the backup copy.

Tools

Tip! You can also use Nokia Application Installer

Tools

available in Nokia PC Suite to install applications. See the CD-ROM supplied with the phone.

The JAR file is required for installing Java applications. If it is missing, the phone may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the JAR file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.

1 Open Manager, and scroll to an installation file.

Alternatively, search the phone memory or the memory card, select the application, and press to start the installation.

2 Select Options > Install.

Tip! While browsing, you can download an

installation file and install it without closing the connection.

During installation, the phone shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the phone displays a warning. Continue installation only if you are sure of the origin and contents of the application.

Options in the Manager main view are App.

downloads, Install, View details, View certificate, Send,

Go to web address, Remove, View log, Send log, Update, Settings, Suite settings, Help, and Exit.

To start an installed application from the main menu, scroll to it, and press .

To start a network connection and to view extra information about the application, scroll to it, and select

Options > Go to web address, if available.

To see what software packages have been installed or removed and when, select Options > View log.

To send your installation log to a help desk so that they can see what has been installed or removed, select Options >

Send log > Via text message, Via multimedia, Via e-mail

(available only if the correct e-mail settings are in place), or Via Bluetooth.

Remove applications and software

Scroll to a software package, and select Options >

Remove. Press Yes to confirm.

If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.

Note: If another software package depends on the

software package that you removed, the other software

package may stop working. Refer to the documentation of the installed software package for details.

Application settings

Software installation—Select the kind of software you

want installed: On, Signed only, or Off.

Online certif. check—Select to check the online certificates

before installing an application.

Default web address—Set the default address used when

checking online certificates.

Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the Manager main view, scroll to an application, and select

Options > Suite settings to change settings related to

that specific application.

Activation keys—handle copyright-protected files

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

Press , and select Tools > Activ. keys to view the digital rights activation keys stored in your phone.

• Valid keys ( ) are connected to one or more media files.

• With expired keys ( ), you have no time to use the media file, or the time period for using the file is exceeded. To view the Expired activation keys, press

• To buy more usage time or extend the usage period for a media file, select an activation key, and Options >

Activate content. Activation keys cannot be updated

if Web service message reception is disabled. See ‘Web service messages’, p. 57.

• To view which keys are not in use at the moment (Not

used), press twice. Unused activation keys have no

media files connected to them saved in the phone.

• To view detailed information such as the validity status and ability to send the file, select an activation key, and press .

Tools

Troubleshooting

Q&A

Bluetooth connectivity

Q: Why can’t I find my friend’s device?

Troubleshooting

A: Check that both devices have activated Bluetooth

connectivity. Check that the distance between the two devices is not over 10 metres and that there are no walls or other obstructions between the devices. Check that the other device is not in hidden mode. Check that both devices are compatible.

Q: Why can’t I end a Bluetooth connection?

A: If another device is connected to your phone, you can

either end the connection using the other device or by deactivating Bluetooth connectivity. Select Connect.

Bluetooth > Off.

Multimedia messaging

Q: What should I do when the phone cannot receive a

multimedia message because memory is full?

A: The amount of memory needed is indicated in the error

message: Not enough memory to retrieve message. Delete

some data first. To view what kind of data you have and

how much memory the different data groups consume, select Tools

100

> File manager > Options > Memory details.

Q: The note Retrieving message is shown briefly. What is

happening?

A: The phone is trying to retrieve a multimedia message from

the multimedia messaging centre. Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging

Settings > Multimedia message.

Q: How can I end the data connection when the phone starts

a data connection again and again?

A: To stop the phone from making a data connection, select

Messaging and one of the following: Recept. in home net. or Reception if roaming retrieval—To have the multimedia messaging centre save

the message to be retrieved later, for example, after you have checked the settings. After this change, the phone still needs to send information notes to the network. To retrieve the message now, select Retr. immediately.

Recept. in home net. or Reception if roaming

ignore all incoming multimedia messages. After this change, the phone does not make any network connections related to multimedia messaging.

Messaging

Q: Why can’t I select a contact?

> Options >

> Defer

> Off—To

Nokia 6681 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Contents

For your safety

Personalise your phone

Set tones

Offline profile

Tools > Settings > Phone > Standby mode > Active standby, and press to switch active standby on or off.

Your phone

Put on the wrist strap

Clock

Clock settings

World clock

Volume and loudspeaker control

File manager

View memory consumption

Memory low—free memory

Memory card tool

Format a memory card

Make calls

Call

Speed dial a phone number

Answer or reject a call

You can answer a call while you have another call in progress if you have activated Call waiting (network service) in Tools > Settings > Call > Call waiting.

Options during a call

Recent calls

Call duration

Packet data

Monitor all communication events

Contacts (Phonebook)

Save names and numbers

Default numbers and addresses

Copy contacts

contacts > SIM directory to see the names and numbers

Add ringing tones for contacts

Voice dialling

Add a voice tag

Make a call with a voice tag

Create contact groups

Remove members from a group

Camera

Take pictures

Take pictures in a sequence

The flash

Adjust colour and lighting

Adjust camera settings

Record videos

Adjust video recorder settings

Gallery

View images

Imaging

Video editor

Edit video, sound, and transitions

Image manager

Image print

Printer selection

Print preview

Print settings

RealPlayer™

Play video or sound clips

Stream content over the air

Receive RealPlayer settings

Messaging

Write text

Traditional text input

Copy text to clipboard

Write and send messages

Receive MMS and e-mail settings

Inbox—receive messages

Multimedia messages

Data and settings

Web service messages

My folders

Mailbox

Open the mailbox

Retrieve e-mail messages

Delete e-mail messages

Disconnect from the mailbox