Nokia Customer Care
NHL-12 Series Transceivers
4 - Service Tools
Issue 2 10/2004 COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
[This page intentionally blank]
2 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
List of Recommended Service Tools ................................................................4
Service Tools and Requirements ...................................................................... 7
Service requirements......................................................................................... 7
Supported operating systems .......................................................................... 7
Hardware requirements ...................................................................................7
Service software ..............................................................................................7
Service Tools..................................................................................................... 8
Issue 2 10/2004 COMPANY CONFIDENTIAL 3
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
[This page intentionally blank]
4 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
1. List of Recommended Service Tools
Type Short Description Code
MJ-13 Module repair jig 0770666
SF-8 POS flash adapter to be used with FLS-4S / FPS-8 flash adapter 0770665
DA-9 Docking station adapter for JBV-1. 0770663
JBV-1 Flash/Test docking station with generic data & power interfaces 0770298
RJ-11 Soldering jig 0770667
MJS-76 LGA re-work jig 0770417
FPS-8 Flash prommer to be used with SF-20 or JBV-1 plus product specific
adapter.Sales pack includes: FPS-8 Prommer, FPS-8 SW activation &
installation instr., FPS-8 activation sheet, power supply ACF-8, AXS-4
service cable (2x 9 pol. Sub-D), AXP-8 Bi-directional printer cable
FLS-4S POS flash prommer for US incl. ACF-8 power supply 0080543
FPS-8C 8 x parallel flash prommer box 0080396
PKD-1 Software security dongle for service SW 0750018
DAU-9S Serial data cable 9 pole Sub-D f <=> 8 pole modular connector 0730108
XCS-4 Modular cable for e.g. connection between FPS-8 and SF-20. 0730178
FLC-2 Power supply cable, Banana connectors to 3,5 mm DC plug, 1,2 meters 0730185
PCS-1 Power cable for FPS-8 with 2 x Banana connectors to 5,5 mm DC plug. 0730012
XRF-1 RF cable 0730085
SCB-3 DC cable 0730114
JBT-9 Bluetooth test & interface box 0081490
ACP-8E Charger for JBT-9 Output: 5.3V DC, 500 mA; Europe. Version 0675195
0080321
ACP-8U Charger for JBT-9 Output: 5.3V DC, 500 mA; US. Version 0675196
AXS-4 D-Sub 9 to D-Sub 9 Serial cable with length of 2 meters 0730090
SRT-6 Opening tool 0770431
AXS-4 Serial cable 9 pol. Sub-D (part of FPS-8 sales package) 0730090
AXP-8 Parallel bi-directional printer cable (part of FPS-8 sales package) 0730298
XRT-11 Camera removal tool 0770527
SES-3 LGA re-work stencil 4350383
XRS-11 RF cable 0730265
Issue 2 10/2004 COMPANY CONFIDENTIAL 5
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
Type Short Description Code
SA-5 RF adapter 0770664
CA-28DS Service data cable, XCS-1 with USB lines connected 0730319
ACF-8 Universal power supply 0680032
6 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
2. Service Tools and Requirements
■ Service requirements
Supported operating systems
• Windows 2000 (service pack 2)
• Windows XP (service pack 1)
Hardware requirements
Minimum
• Processor 233 MHz, RAM memory 64 MB, Disk space 50-100 MB.
Recommended for Windows 2000
• Processor 700 MHz, RAM memory 512 MB, Disk space 50-100 MB.
Service software
The service software used is called Phoenix. The Phoenix service software requires a 32-bit
operating system and is not compatible with Windows versions 3.X. For installation and user
instructions, please refer to Chapter 3 of this service manual.
Issue 2 10/2004 COMPANY CONFIDENTIAL 7
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
■ Service Tools
The following table describes the service tools, which are used to test, tune and calibrate the
NHL-12 phone. For user instructions and procedures, please refer to Chapter 3 of this service
manual.
Type /
Code
JBV-1
0770298
DA-9
0770663
Description Picture
The JBV-1 docking station has been
designed for calibration and software
update use.
The DA-9 docking station adapter makes
signal connections to the phone. JBV -1 and
DA-9 are used as one unit.
JBV-1 main el ectric functions are:
- adjustable VBATT calibration voltage,
current measurement limit voltage”VCHAR”, current measurement calibration current ”ICHAR”.
- adjustable ADC calibration voltage via
BTEMP and BSI signal.
- BTEMP and BSI calibration resistor.
- Signals from FBUS to the phone via parallel jig
- Control via FBUS or USB.
- Flash OK/FAIL indication.
In calibration mode, JBV-1 is powered by
an external power supply 11-16V DC. In
flashing mode, power for the phone can be
taken from FPS-8 or external power supply
11-16V DC.
JBV-1:
DA-9
MJ-13
0770666
8 COMPANY CONFIDENTIAL Issue 2 10/2004
Module jig MJ-13 is designed for HL9 module testing. It can be used for flashing and
RF-, battery-, system-, radio- and SIM
reader testing.
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
RJ-11
0770667
SF-8
0770665
RJ-11 soldering jig is used for soldering
and as a rework jig for HL9 module.
SF-8 POS flash adapter is used in POS
(Point of Sales) environment for software
updating. It provides controlled supply voltage and necessary connections between
the phone and the flash prommer. It substitutes for the phone’s standard battery during the software update.
ACF-8
0680032
ACF-8 universal power supply is used to
power FPS-8. ACF-8 has 6V DC and 2.1A
output.
Issue 2 10/2004 COMPANY CONFIDENTIAL 9
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
FPS-8
0080321
FLS-4S
0080543
FPS-8C
0080396
The flash prommer FPS-8 is used with DA-
9. Power is supplied to FPS-8 from the universal power supply.
Sales pack includes:
- FPS-8 prommer (0750123)
- FPS-8 SW activation & installation instructions
- FPS-8 activation sheet (9359289)
- ACF-8 power supply (0680032)
- AXS-4 service cable (D9-D9) (0730090)
- Printer cable (0730029)
POS flash prommer for US incl. ACF-8
power supply
8 x parallel flash prommer box
The parallel flash prommer FPS-8C is used
for example with DA-9 and JBV-1. Flash
programming can be done to maximum of 8
phones parallel. FPS-8C consists of eight
SF11C programming cards. SF11C card is
functionally identical to FPS-8.
PKD-1
0750018
JBT-9
0081490
Software security dongle for service SW
Bluetooth test & interface box
The JBT-9 test box is a generic device to
perform Bluetooth Bit Error Rate testing
and doing cordless FBUS connection via
Bluetooth. An ACP-8x charger is needed
for BER testing and AXS-4 cable in case of
cordless testing interface usage.
Sales package includes:
- JBT-9 test box (0770336)
- SMA stub antenna (066P056)
- Installation and warranty information
(9360613)
10 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
ACP-8U
0675196
DAU-9S
0730108
Charger for JBT-9
Output: 5.3V DC, 500 mA; US Version
Serial data cable with modular connector.
9 pole Sub-D f <=> 8 pole modular
The MBUS cable DAU-9S has a modular
connector and is used for example
between the PC’s serial port and module jig
MJ-2, SF-2 or JBV-1.
XCS-4
0730178
FLC-2
0730185
Modular cable for e.g. connection between
FPS-8 and SF-20.
XCS-4 is a shielded (one specially shielded
conductor) for flashing and service purposes.
Power supply cable from FPS-8/C to SF-
20.
Banana connectors to 3,5 mm DC plug, 1,2
meters.
FLC-2 is used to supply a controlled operating voltage.
Issue 2 10/2004 COMPANY CONFIDENTIAL 11
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
PCS-1
0730012
XRF-1
0730085
Power cable to connect e.g. JBV-1 to FPS-
8.
2 x Banana connectors to 5,5 mm DC plug.
RF cable to connect e.g. module repair jig
to RF measurement equipment.
SMA to N-Connector ca. 610mm
AXS-4
0730090
The AXS-4 D9-D9 service cable is used to
connect two 9 pin D connectors e.g.
between PC and FPS-8. Cable length is 2
meters.
12 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
SCB-3
0730114
AXP-8
073F000
The DC cable SCB-3 is used to connect
JBV-1 to the phone, for example.
The parallel printer cable connects the parallel connector of the PC and the parallel
input of the FPS-8.
SRT-11
0770527
SES-3
4350383
The camera removal tool SRT -11 is used to
remove the camera from its locking connector.
SES-3 stencil is used with MJS-76 /
0770417 and it supports the PA component. SES-3 is made for reworking purposes used in central service level.
Issue 2 10/2004 COMPANY CONFIDENTIAL 13
Copyright © 2004 Nokia. All Rights Reserved.
Nokia Customer Care 4 - Service Tools
MJS-76 This tool is used in LGA type component
reworking purposes in central service centers.
Parts list
NHL-12
SA-5:
0770664
and
XRS-11
0730265
SA-5 is RF adapter for measurement and
tuning purposes. It can be used with RF
cable XRS-11.
SA-5
XRS-11:
14 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
4 - Service Tools Nokia Customer Care
CA-28DS
0730319
SRT-6
0770431
Data cable for connections between FLS4S and SF-8. CA-28DS is shielded USB
connected cable for flashing purposes.
Opening tool
Issue 2 10/2004 COMPANY CONFIDENTIAL 15
Copyright © 2004 Nokia. All Rights Reserved.
NHL-12
Nokia Customer Care 4 - Service Tools
[This page intentionally blank]
16 COMPANY CONFIDENTIAL Issue 2 10/2004
Copyright © 2004 Nokia. All Rights Reserved.
Loading...