ADD02.QXD 2/4/98 2:20 PM Page 1
ST4 Telephone User Guide Addendum
Please note that the Flash feature of the telephone is set
at 640 mS +/- 100 mS.
The following information supercedes the regulatory information in the 85403MBG01 user guide.
Federal Communications Commission (FCC) Note
The ST4 is designed for connection to a host system.
Refer to the system’s installation manual for instructions
on connecting a single line telephone.
The ST4 complies with Part 68 of the FCC rules and
incorporates FCC-compliant telephone cords, plugs and
jacks. The label on the bottom of the telephone contains
the FCC registration number. This equipment utilizes a
telephone receiver that is
If this equipment is not operating properly, contact Nitsuko
America (or an authorized repair facility of Nitsuko
America). Do not attempt to make repairs on your own.
For information, please contact:
Nitsuko America, T elecom Division
Hearing Aid Compatible
4 Forest Parkway
Shelton, CT 06484
Tel: 203-926-5448
.
ST4 Telephone User Guide Addendum
Please note that the Flash feature of the telephone is set
at 640 mS +/- 100 mS.
The following information supercedes the regulatory information in the 85403MBG01 user guide.
Federal Communications Commission (FCC) Note
The ST4 is designed for connection to a host system.
Refer to the system’s installation manual for instructions
on connecting a single line telephone.
The ST4 complies with Part 68 of the FCC rules and
incorporates FCC-compliant telephone cords, plugs and
jacks. The label on the bottom of the telephone contains
the FCC registration number. This equipment utilizes a
telephone receiver that is
If this equipment is not operating properly, contact Nitsuko
America (or an authorized repair facility of Nitsuko
America). Do not attempt to make repairs on your own.
For information, please contact:
Nitsuko America, T elecom Division
Hearing Aid Compatible
4 Forest Parkway
Shelton, CT 06484
Tel: 203-926-5448
.
( over )
( over )
ADD02.QXD 2/4/98 2:20 PM Page 3
Industry Science Canada Note
The ST4 telephone is designed for connection to a host
system. Refer to the system’s installation manual for
instructions on connecting a single line telephone.
The Canadian Department of Communications label
identifies certified equipment. This certification means that
the equipment meets certain telecommunications protective,
operational and safety requirements. The Department
does not guarantee the equipment will operate to the user’s
satisfaction.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Do not attempt to make any repairs on your
own. For information please contact:
Nitsuko Canada
165 Matheson Blvd. East, Unit #4-6
Mississauga, Ontario Canada L4Z 3K2
Tel: 905-507-2888
Industry Science Canada Note
The ST4 telephone is designed for connection to a host
system. Refer to the system’s installation manual for
instructions on connecting a single line telephone.
The Canadian Department of Communications label
identifies certified equipment. This certification means that
the equipment meets certain telecommunications protective, operational and safety requirements. The Department
does not guarantee the equipment will operate to the user’s
satisfaction.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Do not attempt to make any repairs on your
own. For information please contact:
Nitsuko Canada
165 Matheson Blvd. East, Unit #4-6
Mississauga, Ontario Canada L4Z 3K2
Tel: 905-507-2888
85403ADD02
Issue 1-0
February 1998
Printed in U.S.A.
85403ADD02
Issue 1-0
February 1998
Printed in U.S.A.
Loading...