NISSAN Altima Coupe User Manual

FOREWORD

NISSAN NAVIGATION SYSTEM HELPDESK CONTACT INFORMATION

For assistance or inquiries about the NISSAN Navigation System, or to order updated mapping DVD-ROMs or additional DVD-ROMs, contact the NISSAN NAVIGATION SYSTEM HELPDESK at:

● ADDRESS: P.O. Box 1588, Orem, UT 54059-992

● E-MAIL: nissan-navi-info@navteq.com

● WEB SITE: www.navigation.com or

www.nissan.ca

● PHONE: 1-888-661-9995

● HOURS: 6:00 AM to 5:00 PM

(Pacific Time)

NISSAN CONSUMER AFFAIRS DEPARTMENT

For assistance or inquiries about the NISSAN warranty, service or general questions, contact the NISSAN Consumer Affairs Department at:

For U.S. customers Nissan North America, Inc. Consumer Affairs Department P.O. Box 685003 Franklin, TN 37068-5003 1-800-NISSAN-1 (1-800-647-7261)

For Canadian customers Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5 1-800-387-0122

Thank you for purchasing a NISSAN automobile.

This user’s manual is for the Altima navigation system only. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN Altima.

Please read this manual carefully to help ensure safe operation of the navigation system.

● Because of possible specification changes, sections of this manual may not apply to your vehicle.

● All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design at any time without notice.

● Do not remove this manual from the vehicle when selling this vehicle. The next user of this navigation system may need the manual.

Required XM Radio威 and NavTraffic monthly subscriptions sold separately after trial period. XM NavTraffic威 only available in select markets. For more information, see www.xmradio.com/navtraffic.

Table of

Introduction

Contents

Getting started

Map settings

Setting a destination

Route guidance

Storing a location/route

Viewing technical information

Other settings

Voice recognition

General system information

Troubleshooting guide

Index

1 Introduction

How to use this manual ............................1-2

For safe operation .................................1-2

Reference symbols ................................1-2

Safety information .................................1-3

Laser product .....................................1-3

HOW TO USE THIS MANUAL FOR SAFE OPERATION REFERENCE SYMBOLS

This manual uses special words, symbols and icons, organized by function.

Please refer to the following items and familiarize yourself with them.

Basic operations of the navigation system can be performed in a similar manner for all vehicle models. However, the map screen and setting screen may be different for each model. Set the navigation system as appropriate for your vehicle.

WARNING



This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely.

CAUTION

This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.

NOTE:

This indicates an item to help you understand and maximize the performance of your vehicle. If ignored, it may lead to a malfunction or poor performance.

INFO:

This indicates information that is necessary for efficient use of your vehicle or accessories.

Reference page:

This indicates the title and page that you should refer to.

MAP:

This is an example of how a button on the control panel will be shown.

“Route”:

This is an example of a key/item displayed on the screen.

Voice Command:

This indicates an operation by voice command.

1-2 Introduction

SAFETY INFORMATION LASER PRODUCT

This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up-to-date. The system is not a substitute for safe, proper and legal driving.

Before using the navigation system, please read the following safety information. Always use the system as outlined in this manual.

WARNING



● When the driver wants to operate the navigation system, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident.

● Do not rely on route guidance alone. Always be sure that all driving maneuvers are legal and safe in order to avoid accidents.

● Do not disassemble or modify this system. If you do, it may result in accidents, fire or electrical shock.

● Do not use this system if you notice any malfunctions such as a frozen screen or the lack of sound. Continued use of the system may result in accidents, fire or electrical shock.

● If you notice any foreign objects in the system hardware, spill liquid on the system or notice smoke or a smell coming from it, stop using the system immediately and contact a NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock.

CAUTION

● Do not keep the navigation system running with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running.

● Some states/provinces may have laws limiting the use of video screens while driving. Use this system only where it is legal to do so.

This navigation system is certified as a Class 1 laser product.

The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J.

WARNING



● Do not disassemble or modify this system. There are no user serviceable parts in this navigation system.

● If maintenance, adjustments and operations other than those specified in this manual are attempted, injury due to laser radiation and exposure could occur.

Introduction 1-3

MEMO

1-4 Introduction

2 Getting started

Control buttons and functions.......................2-2

Control panel ..................................2-2

Steering wheel switch. . . ........................2-3

Start-up screen ...................................2-4

Menu screen types and how to operate ..............2-5

Menu screens and their purposes ................2-5

Using controls to adjust values, levels, etc. ........2-8

Map menu screen ..............................2-9

Start menu. . . .................................2-11

Functions disabled while driving....................2-12

Operating maps ..................................2-13

How to view a map screen......................2-13

Map screen types .............................2-14

Switching map view ...........................2-15

Moving around within a map ....................2-16

Changing the scale of a map....................2-17

Storing your home location/address ................2-18

How to store your home........................2-18

Character (letter and number) input screen .......2-22

Phone number input screen.....................2-23

List screen....................................2-25

Setting a destination ..............................2-26

Searching for a destination .....................2-26

Starting route guidance ........................2-29

Deleting a route ...............................2-30

Setting the voice guidance ........................2-31

Turning voice guidance on/off...................2-31

Adjusting voice guidance volume ................2-33

Voice recognition .................................2-34

NISSAN voice recognition ......................2-34

Basic voice control ............................2-34

Voice command examples ......................2-36

CONTROL BUTTONS AND FUNCTIONS

CONTROL PANEL

䊐

DAY/NIGHT:

Press to switch between the day screen (bright) and the night screen (dark).

TILT:

Press and hold to access the DVD-ROM drive to remove or install the map DVD-ROM.

INFO:

Press to access system information.

2-2 Getting started

SETUP:

䊐

Press to access system settings.

MAP:

䊐

Press to display the current location map screen.

DEST:

䊐

Press to enter a destination. Various methods for entering a destination are available.

“4. Setting a destination”.

Additional keys/items may appear on the touchscreen after pressing one of the above control panel buttons. For additional information, see the following sections.

“MENU”:

Touch to store a location or change settings on the current location map screen.

“Route”:

Touch to access guidance control functions (guidance cancellation, route priority, waypoint setting on the route, etc.).

“ZOOM IN”, “ZOOM OUT”:

Touch to change the map scale.

LNV0422

䊐

Press to start the voice recognition mode. Press and hold for 2 seconds to cancel voice commands when in the voice recognition mode.

䊐

Use to enable Bluetooth姞 Hands-Free Phone. For additional information, see the Owner’s Manual.

STEERING WHEEL SWITCH

SOURCE :

䊐

Use to switch the audio mode (source). For additional information, see the Owner’s Manual.

ENTER :

䊐

Move up or down to highlight an item on the screen, etc. Then press to select the highlighted item.

䊐

Press this button during a setting operation to return to the previous screen. In certain screens, this button can also be used to apply the setting. This button will only work when the “Back” key is shown on the screen.

䊐

Use to adjust the volume. These buttons have the same function as that of the volume knob. For additional information, see the Owner’s Manual.

–or+:

LNV0423

Getting started 2-3

START-UP SCREEN

1. The navigation system starts when the igni-

LNV0051 LNV0052

tion switch is placed in the ACC or ON position.

2-4 Getting started

2. As the start-up screen is displayed, read the precautions carefully, and touch the “I agree” key.

INFO:

If you do not touch the “I agree” key or push the ENTER button on the steering wheel in less than 30 seconds while the precaution is on the screen, the audio or off screen will be displayed.

Press the DEST, MAP, INFO, SETUP or button to return to the start-up screen.

MENU SCREEN TYPES AND HOW TO OPERATE

MENU SCREENS AND THEIR PURPOSES

Press the DEST, ROUTE, INFO, or SETUP button to display the corresponding menu screen.

How to select a menu item

LNV0424

Example: DEST button

Getting started 2-5

There are two ways to select keys or items on the touch-screen.

To select the preferred menu item, touch the

䊐

key on the screen or

Push the up or down button on the steering

䊐

wheel switch. An item is highlighted accordingly, then press the ENTER button to select it.

Using the touch-screen

Example: DEST screen

1. To select the preferred menu item, touch the key on the screen.

2. Depending on the item selected, a detailed

LNV0057 LNV0058

menu screen, a character input screen or a setting screen, etc. is displayed. On the screen displayed, make adjustments, input information, etc. accordingly.

3. Touch the “ previous screen without applying any changes.

Using the steering wheel switches

Example: DEST screen

1. To select the preferred menu item, push the up or down button on the steering wheel switches. After an item is highlighted, push the ENTER button on the steering wheel switches to select it.

Back” key to return to the

2-6 Getting started

2. Depending on the item selected, a detailed

LNV0057 LNV0058

menu screen, a character input screen or a setting screen, etc. is displayed. On the screen displayed, make adjustments, and input information, etc. accordingly.

3. Press the

button on the steering wheel switches to return to the previous screen without applying any changes.

Getting started 2-7

WNV0548

USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.

Touch the keys on the screen or use the steering wheel switches to adjust the volume of the guidance volume, phone ringer vol., etc.

How to adjust

Touch the “–” or “+” key on the screen. The

䊐

bars of the corresponding adjustment item changes.

Use the steering wheel switches by pushing

䊐

up or down to select/highlight the item and then pressing the ENTER button. The value or bar indicating levels increases or decreases accordingly.

Touch the “Back” key on the touch-screen or the

to apply the setting.

button on the steering wheel switches

2-8 Getting started

MAP MENU SCREEN

Touch the “MENU” key while the current location map screen or a scrolled map screen is displayed, to display the menu corresponding to that screen.

This menu allows you to quickly use helpful functions, such as storing a location easily and searching for nearby facilities.

To select a menu item, use the method described in “Menu screen types and how to operate” earlier in this section.

Current location map screen

LNV0426

If the “MENU” key is touched while the current location map screen is displayed, the following options are available.

● Store Location:

Allows you to store the current vehicle location in the Address Book. The stored location can be retrieved as necessary to set it as a destination (waypoint).

“STORING A LOCATION” (page 6-2)

● Nearby Places:

Allows you to search for facilities near the current vehicle location, such as restaurants and gas stations, etc.

“SETTING A NEARBY PLACE” (page 4-35)

● Map View:

Switches the map type. It is used to switch between the 2D Plan View and the 3D Birdview™.

“SWITCHING THE MAP VIEW” (page 3-4)

● Landmark Icons:

Allows you to display facility icons near the current vehicle location on the map, such as restaurants and gas stations, etc.

“DISPLAY LANDMARK ICONS” (page 3-16)

Getting started 2-9

Scrolled location map screen

If the “MENU” key is touched while a scrolled map screen is displayed, the following options are available.

● New Dest:

Allows you to scroll through the map and use the cursor location to set a destination. If a destination is already set, the old destination will be deleted and the new location will be set as the destination.

“SETTING FROM MAP”

LNV0427

(page 4-13)

● Add to Route:

Allows you to set the cursor location as the destination or a waypoint.

This is available only when the suggested route is already set.

“SETTING A DESTINATION OR WAYPOINT” (page 5-15)

● Nearby Places:

Allows you to search for a facility near the location where you scrolled to and set it as a destination or waypoint. Use the same search method as the one for Points Of Interest (POI).

“SETTING A NEARBY PLACE” (page 4-35)

● Store Location:

Allows you to store the location where you scrolled to in the Address Book. The stored location can be retrieved to set it as a destination or waypoint.

“STORING A LOCATION” (page 6-2)

● Delete:

Allows you to delete a stored location, destination or waypoint. To delete it, place the cross pointer over the corresponding icon.

2-10 Getting started

START MENU

The start menu can be displayed using the steering wheel switch.

1. Press the ENTER button on the steering wheel switch.

2. Touch the key on the screen or highlight the preferred item and press the ENTER button.

INFO:

The ENTER button on the steering wheel switch can be used to display the start menu only when the map screen is displayed.

Available items

● Home:

Displays the current home location map screen if it has been set and calculates a route home.

“4. Setting a destination”

● Address Book: Displays the address book screen. It is the

same screen that appears when the DEST button is pressed and the “Address Book” key is selected.

“4. Setting a destination”

LNV0428

● Nearby Places:

Displays the nearby places screen. It is the same screen that appears when the DEST button is pressed and the “Nearby Places” key is selected.

“4. Setting a destination”

Getting started 2-11

● Previous Destinations:

Displays the previous destinations screen. It is the same screen that appears when the DEST button is pressed and the “Previous Destinations” key is selected.

“4. Setting a destination”

● Cancel Route Guidance:

Cancels the current guided route.

FUNCTIONS DISABLED WHILE DRIVING

2-12 Getting started

Not all features can be manually operated while the vehicle is in motion. The text for these restricted features turn from white to gray and can-

not be selected. Alternatively, the voice recogni-

LNV0540

tion system may have a related command that can be used at any time.

In some cases, certain text will not be displayed on the screen.

Park the vehicle in a safe location and then operate the navigation system.

OPERATING MAPS

HOW TO VIEW A MAP SCREEN

The navigation system displays various information on the map screen.

Screen information

䊐

Arrow and distance:

Appears on the upper left corner of the screen when the suggested route is set.

Indicates the distance to the next guide point and the turning direction at that guide point. The system can be set to not display this item.

䊐

Vehicle icon:

Indicates the current vehicle location and the direction of travel.

Guide point:

Indicates a guide point on the route.

Route:

Touch this key to access the route settings.

Menu:

Touch this key to access the map menu or the map scroll menu.

Getting started 2-13

LNV0431

䊐

● Roads with a width of 10 ft (3 m) or less may

● The system may require a long time for

/ Direction indicator:

Indicates the direction of the map. Touch this key to switch the orientation of the map.

Scale indicator:

Indicates the scale of the map.

Remaining time and distance to

the destination:

Indicates the remaining time and distance to the destination.

Suggested route:

Appears in bold yellow during route guidance.

Voice:

Touch this key to repeat the voice guidance.

INFO:

not be displayed on the map.

positioning. This is not a malfunction.

MAP SCREEN TYPES

Two types of map views are available: 2D Plan View and 3D Birdview™.

LNV0069

Plan View

Plan View displays the map in a 2-dimensional environment similar to a road map.

2-14 Getting started

Birdview™

LNV0070 LNV0069 LNV0071

Birdview™ displays the view from an elevated perspective. In Birdview™, it is easy to recognize an image of the route because it provides a panoramic view over a long distance.

SWITCHING MAP VIEW

1. Touch the “MENU” key while the current location map screen is displayed.

2. Touch the “Map View” key.

Getting started 2-15

3. Touch the “2D” key for Plan View or touch

LNV0072 LNV0429

the “3D” key for Birdview™. The indicator of the selected map view illuminates.

“SWITCHING THE MAP VIEW” (page 3-4)

4. Touch the “Back” key or the MAP button to return to the current location map screen.

INFO:

● When you select a map view, a preview of that view is displayed on the right side of the screen.

● You can also switch the map view using the following procedure.

1. Press the SETUP button.

2. Touch the “Navigation” key.

3. Touch the “Map View” key.

2-16 Getting started

MOVING AROUND WITHIN A MAP

You can manually move across the map to view the surrounding areas or a preferred location.

1. Touch the touch-screen in the direction that you want to move across the map. Touch and hold down on the touch-screen to continuously move across the map in that direction. Once you start moving on the map, the cross pointer appears.

2. Returning to the current location map screen

Press the MAP button or “Back” key to return to the current location map screen, and the cross pointer disappears.

LNV0430

CHANGING THE SCALE OF A MAP

Touch the “ZOOM IN” or “ZOOM OUT” key. The scale numbers change on the screen.

To view the map in detail, touch “ZOOM IN” key. To view a wider area, touch “ZOOM OUT” key.

Getting started 2-17

STORING YOUR HOME LOCATION/ADDRESS

HOW TO STORE YOUR HOME

If your home location is already stored in the Address Book, it can be easily retrieved to set the route to your home.

The procedure to store your home location is similar as the one for storing a location.

“4. Setting a destination”

2-18 Getting started

Example 1 , the procedure for storing your

LNV0082 LNV0083

home location.

1. Press the DEST button.

2. Touch the “Home (Add New)” key.

INFO:

If you have already stored your home this button may not appear.

INFO:

When you touch the “Home (Add New)” key, a confirmation message is displayed.

3. Choose a way to find your home address.

LNV0084 LNV0085 LNV0087

For example, touch the “Street Address” key. A character input screen is displayed.

4. Enter your home information. A list screen is displayed.

5. Touch the preferred home address key from the list.

Getting started 2-19

6. Your home is displayed at the center of the

LNV0089 LNV0189 LNV0190

map. If the location is correct touch the “OK” key.

A confirmation message is displayed, and the system sets your home as the destination.

Example 2 ; the procedure for storing your home location by searching for a destination by address is described here.

1. Press the DEST button.

2-20 Getting started

2. Touch the “Address Book” key. 3. Touch the “Home Location (Add New)” key.

4. Touch the “Street Address” key. 5. Enter the address of your home and touch

LNV0084 LNV0085 LNV0087

the “OK” key. Depending on what screen you are at another character input screen may appear.

“SETTING A STREET ADDRESS” (page 4-4)

6. A list of possible locations may appear. Touch the correct key that corresponds to your home.

7. A message is displayed and your home location is stored.

You can edit the home location information or move its location. The home icon is displayed on the map.

INFO:

You can also perform the same setting by pressing the SETUP button and touching the “Navigation” key.

“STORING A LOCATION BY SEARCHING” (page 6-2)

Getting started 2-21

CHARACTER (letter and number) INPUT SCREEN

You will have to enter alphanumeric characters when setting a destination, searching for a facility or editing the stored locations, etc.

2-22 Getting started

1. Use the touch-screen or steering wheel

LNV0091 LNV0092

switches.

2. Touch one of the character keys on the touch-screen or use the steering wheel switch to highlight the correct character then press the ENTER button. The character is entered.

3. Touch the “Delete” key to delete the last

LNV0093 LNV0094 LNV0095

character entered.

INFO:

Touch and hold the “Delete” key for approximately 2 seconds, to delete all characters entered.

Touch the “Space” key to enter a space.

4. After finishing the entry, touch the “OK” key. It may bring you to another character input screen depending on what step or screen you are on.

INFO:

You can touch the “Back” key to return to the previous screen.

PHONE NUMBER INPUT SCREEN

You can enter a phone number as a search method to look for a business or facility.

INFO:

Only the locations included in the database in the map DVD-ROM can be searched by the phone number.

1. Touch the number keys on the touch-screen or use the steering wheel switches to input the numbers.

Getting started 2-23

+ 208 hidden pages