Nissan Altima 2017 LC2F Kai Navigation Manual
2017 NAVIGATION
SYSTEM
OWNER’S MANUAL
For your safety, read carefully and keep in this vehicle.
FOREWORD
NISSAN NAVIGATION SYSTEM HELPDESK CONTACT INFORMATION
For assistance or inquiries about the NISSAN Navigation System, or to order updated
map data, contact the NISSAN NAVIGATION
SYSTEM HELPDESK at:
ADDRESS: P.O. Box 1588,
•
Orem, UT 84059-992
E-MAIL: Nissan-Navi-Info@navteq.com
•
WEB SITE: www.navigation.com or
•
www.nissan.ca
PHONE: 1-888-661-9995
•
HOURS: 6:00 AM to 5:00 PM
•
(Pacifi c Time)
NISSAN CONSUMER AFFAIRS DEPARTMENT
For assistance or inquiries about the NISSAN
warranty, service or general questions, contact
the NISSAN Consumer Affairs Department at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
1-800-387-0122
Thank you for purchasing a NISSAN vehicle
This user’s manual is for the navigation system
only. This manual contains operating instructions for the NISSAN Navigation System offered in your NISSAN vehicle.
Please read this manual carefully to ensure safe
operation of the navigation system.
Because of possible specifi cation changes
•
and optional equipment, sections of this
manual may not apply to your vehicle.
All information, specifi cations and illustra-
•
tions in this manual are those in effect
at the time of printing. NISSAN reserves
the right to change specifi cations or
design at any time without notice.
Do not remove this manual from the vehicle
•
when selling this vehicle. The next user of
this navigation system may need the manual.
Table of
Introduction
1
Contents
Getting started
Map settings
Navigation
Other settings
General system information
Troubleshooting guide
Index
2
3
4
5
6
7
8
1 Introduction
How to use this manual ............................1-2
For safe operation ..............................1-2
Reference symbols .............................1-2
Safety information .................................1-2
Laser product .....................................1-3
HOW TO USE THIS MANUAL SAFETY INFORMATION
This manual uses special words, symbols and
icons that are organized by function.
Please refer to the following items to understand
how to use this manual properly.
FOR SAFE OPERATION
WARNING
m
Indicates the presence of a hazard that
could cause death or serious personal
injury. To avoid or reduce the risk, the
procedures must be followed precisely.
CAUTION
Indicates the presence of a hazard that
could cause minor or moderate personal injury or damage to your vehicle.
To avoid or reduce the risk, the procedures must be followed carefully.
NOTE:
Indicates items that help you understand
and maximize the performance of your
vehicle. If ignored, they may lead to a malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
Indicates information that is necessary for efficient use of your vehicle or accessories.
Reference page:
Indicates the title and page that you
should refer to.
NAV:
This is an example of how a button on the control
panel will be shown.
“Route”:
This is an example of a key/item displayed on the
screen.
This system is primarily designed to help you
reach your destination, and it also performs other
functions as outlined in this manual. However,
you, the driver, must use the system safely and
properly. Information concerning road
conditions, traffic signs and the availability of
services may not always be up-to-date. The system is not a substitute for safe, proper and legal
driving.
Before using the navigation system, please read
the following safety information. Always use the
system as outlined in this manual.
WARNING
m
● To operate the navigation system,
first park the vehicle in a safe location and set the parking brake. Operating the system while driving can
distract the driver and may result in a
serious accident.
● Do not rely on route guidance alone.
Always be sure that all driving maneuvers are legal and safe in order to
avoid accidents.
● Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
1-2 Introduction
LASER PRODUCT
● If you notice any foreign objects in
the system hardware, spill liquid on
the system or notice smoke or a
smell coming from it, stop using the
system immediately and contact a
NISSAN dealer. Ignoring such conditions may lead to accidents, fire or
electrical shock.
CAUTION
● Do not use this system if you notice
any malfunctions such as a frozen
screen or the lack of sound. Continued use of the system may result in
accidents, fire or electrical shock.
● Some states/provinces may have
laws limiting the use of video
screens while driving. Use this system only where it is legal to do so.
● Extreme temperature conditions [below -4 °F (-20 °C) and above 158 °F
(70 °C)] could affect the performance
of the system.
NOTE:
Do not keep the navigation system running
with the engine stopped. Doing so may
discharge the vehicle battery. When you
use the navigation system, always keep
the engine running.
WARNING
m
● Do not disassemble or modify this
system. There are no user serviceable parts in this navigation system.
● If maintenance, adjustments and operations other than those specified
in this manual are attempted, injury
due to laser radiation and exposure
could occur.
Introduction 1-3
SiriusXM services require a subscription after a trial period and are sold separately or as a package. Our satellite
service is available only in the 48 contiguous USA and DC. For more information visit www.siriusxm.com.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect spe-
cifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone my affect wireless performance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by DENSO CORPORATION is under license. Other trademarks and trade names are those of
their respective owners.
Required SiriusXM Satellite Radio and SiriusXM Traffic monthly subscriptions are sold separately.
SiriusXM Traffic are only available in select markets. For more information, see
www.siriusxm.com/siriusxmtraffic
Required SiriusXM Satellite Radio and SiriusXM Travel Link monthly subscriptions are sold separately.
SiriusXM Travel Link is only available in select markets. For more information, see
www.siriusxm.com/travellink
App Store
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Google Play™
Google Play is a trademark of Google Inc.
Google
© 2012 Google Inc. All rights reserved.
1-4 Introduction
2 Getting started
Control buttons and functions.......................2-2
Control panel (Type A) ..........................2-2
Control panel (Type B) . . . .......................2-3
Steering wheel switch (Type A) ..................2-4
Steering wheel switch (Type B) ..................2-4
Steering wheel switch (Type C) ..................2-5
Basic operation ...................................2-5
Functions disabled while driving..................2-5
Touch screen operation .........................2-5
Menu screen operation..........................2-7
How to input characters.........................2-8
CONTROL BUTTONS AND FUNC-
TIONS
3
TUNE-SCROLL knob / ENTER/AUDIO but-
CONTROL PANEL (Type A)
1
VOL (volume) control knob/POWER button:
䊐
Rotate clockwise to increase the volume or
counterclockwise to lower the volume.
Press to turn the audio system on or off.
2
Touch screen display
䊐
䊐
ton:
Turn to scroll through the items in a list.
Press to select a menu item. When the
screen is not displaying a list or menu, the
knob is used to control the audio system.
Press the ENTER/AUDIO button to select a
highlighted item on the screen.
䊐
4
BACK button:
Press to return to the previous screen or to
delete the last inputted letter if a touch keyboard is displayed on the screen.
2-2 Getting started
LNV3015
5
䊐
Press to access the system settings.
6
䊐
Press to change the display brightness between day and night modes. While the mode
is being displayed, the brightness can be
adjusted using the TUNE-SCROLL knob.
Press and hold for more than two seconds
to switch the display to a larger display of
the digital clock.
7
MAP button:
䊐
Press to display the current location map
screen.
8
NAV button:
䊐
Press to access the functions of the Navigation system.
button:
button:
“DISPLAY SETTINGS”
(page 5-4)
CONTROL PANEL (Type B)
1
䊐
Press to access the system settings.
2
䊐
Press to change the display brightness between day and night modes. While the mode
is being displayed, the brightness can be
adjusted using the TUNE-SCROLL knob.
button:
button:
Press and hold for more than two seconds
to switch the display to a larger display of
the digital clock.
“DISPLAY SETTINGS”
(page 5-4)
䊐
3
BACK button:
Press to return to the previous screen or to
delete the last inputted letter if a touch keyboard is displayed on the screen.
LNV2515
4
TUNE-SCROLL knob / ENTER/AUDIO
䊐
button:
Turn to scroll through the items in a list.
Press to select a menu item. When the
screen is not displaying a list or menu, the
knob is used to control the audio system.
Press the ENTER/AUDIO button to select a
highlighted item on the screen.
5
Touch screen display
䊐
6
MAP button:
䊐
Press to display the current location map
screen.
7
VOL (volume) control knob/POWER button:
䊐
Rotate clockwise to increase the volume or
counterclockwise to lower the volume.
Press to turn the audio system on or off.
8
NAV button:
䊐
Press to access the functions of the Navigation system.
Getting started 2-3
LNV2506 LNV3011
STEERING WHEEL SWITCH (Type A
Volume control two-button operation
1
Volume increase button
䊐
Increases the volume of the voice guidance
given by the Navigation System if pressed
while the voice guidance is speaking. If the
volume increase button is pressed at any
other time, only the volume of the active
screen (phone, SMS playback, Voice Recognition system [if so equipped], audio system) will be increased.
2
Volume decrease button
䊐
Decreases the volume of the voice guidance
given by the Navigation System if pressed
while the voice guidance is speaking. If the
volume decrease button is pressed at any
other time, only the volume of the active
screen (phone, SMS playback, Voice Recognition system [if so equipped], audio system) will be decreased.
)
STEERING WHEEL SWITCH (Type B
Volume control one-button operation
1
Volume control button
䊐
Increases or decreases the volume of the
voice guidance given by the Navigation System if pressed while the voice guidance is
speaking. If the volume button is pressed at
any other time, only the volume of the active
screen (phone, SMS playback, Voice Recognition system [if so equipped], audio system) will be adjusted.
For more information about the audio system,
Bluetooth® Hands-Free Phone System and
Voice Recognition system (if so equipped), see
the vehicle’s Owner’s Manual.
)
2-4 Getting started
LNV4013 LNV2630 LNV3001
STEERING WHEEL SWITCH (Type C
Volume control one-button operation
1
Volume control button
䊐
Increases or decreases the volume of the
voice guidance given by the Navigation System if pressed while the voice guidance is
speaking. If the volume button is pressed at
any other time, only the volume of the active
screen (phone, SMS playback, Voice Recognition system [if so equipped], audio system) will be adjusted.
For more information about the audio system,
Bluetooth® Hands-Free Phone System and
Voice Recognition system (if so equipped), see
the vehicle’s Owner’s Manual.
BASIC OPERATION
)
FUNCTIONS DISABLED WHILE
DRIVING
To promote safe driving, some functions cannot
be operated or have limited operation when the
vehicle driving speed is above 5 mph (8 km/h).
The on-screen text and keys for these restricted
functions will be “grayed out” or muted and cannot be selected while driving.
All text input screens are grayed out while the
vehicle is moving. Other functions are locked out
depending on vehicle speed, the function and
the number of times a feature is selected.
When a menu selection is grayed out, the feature is locked out until the system operating conditions are met to allow the selection.
TOUCH SCREEN OPERATION
The same operations described for the scrolling
knob are possible using touch screen operation.
Getting started 2-5
LNV3008 LNV2440 LNV3014
Examples of touch screen operation
Selecting an item:
When any item is touched, the next screen is
displayed.
Adjusting:
Touch the “+”, “-”, “>” or “<” key to adjust a
setting.
2-6 Getting started
Scrolling through a message or list:
Turn the TUNE-SCROLL knob to scroll through
a message or a list. When scrolling a lengthy list,
you can also touch the screen and slide your finger along the scroll bar where shown to scroll
more quickly. Touching the up or down arrow will
move between pages of the list.
3. Press the BACK or
The previous screen will be displayed and
the changes will be saved.
BACK button.
(Type A)
MENU SCREEN OPERATION
LNV2448
(Type B)
LNV2509
Menu screens and their purpose
Press one of the application buttons to activate
the corresponding menu screen:
● NAV (Navigation)
●
How to select a menu item
1. As an alternative to using the touch screen,
turn the TUNE-SCROLL knob clockwise or
counter-clockwise to scroll through the
menu items until the preferred item is
highlighted.
2. To select the preferred item, press the
TUNE-SCROLL knob.
Getting started 2-7
NOTE:
BACK button to delete the
LNV2415
HOW TO INPUT CHARACTERS
Alphanumeric characters are used when setting
a destination, searching for an address, editing
stored locations, etc.
Character (letter and number) input
screen
1. Touch characters on the touch keyboard
and they will appear in the field at the top of
the screen. When the entry is complete,
touch the “OK” key.
Alternatively, use the scrolling knob to highlight a character and press the knob to select that character.
● Press the
last inputted character or to return to the previous screen if no characters have been
inputted.
● On every character entry screen, the touch
keyboard will display only the letters that are
possible to enter after the current letter.
● Symbol and number keys are available when
the “123/ABC” key is touched.
● Touch the “123/ABC” key to toggle the display between the touch keyboard for letters
and the touch keyboard for numbers and
symbols.
2. To delete the last entry, touch the “Delete”
key or hold it to delete all entries at once.
3. After finalizing the entries, touch the “OK”
key or touch the “List” key for the completed
list screen.
NOTE:
● If a phrase is being entered that has been previously entered into the system, the matched
text may appear in light gray. Touch “OK” to
search for the matched text. Touch “List” to
search for both the matched text and entered
text.
2-8 Getting started
3 Map settings
Screen information ................................3-2..........3-2
Map types ........................................3-3
2-Dimensional (2D) view ........................3-3
2-Dimensional North Up (2DN) view ..............3-4
3-Dimensional (3D) view ........................3-4
Moving a map .....................................3-4
Returning to the current vehicle location...........3-5
Map options menu screen . . . .......................3-5
Changing the map scale............................3-6
Map scale .....................................3-6
Looking at information on the map ...................3-7
Map symbols...................................3-7
Map settings for the map screen ....................3-9
Lane information..................................3-11
Map SD-card ....................................3-11
How to handle the SD-card.....................3-12
SD-card replacement ..........................3-12
How to order map data updates.................3-12
About the map data............................3-12
End-user terms................................3-14
SCREEN INFORMATION
1
“Voice” key:
䊐
Touch to repeat the voice guidance while a
route is active. Touch and hold for two seconds to toggle the voice guidance on or off
(button will be grayed out when voice guidance is turned off). This option is available
only when a route is set.
2
Audio information:
䊐
Indicates the radio station, CD track number
or other audio information currently playing.
3
Current route:
䊐
A blue line indicates the path to follow.
4
Satellite and Bluetooth connection informa-
䊐
tion:
This area shows satellite and/or Bluetooth
connections, indicates unread text messages and illustrates a connected cell
phone’s battery and signal strength.
5
Clock:
䊐
Indicates the current time.
6
Next maneuver road name:
䊐
Indicates the name of the next road in the
route guidance. This is only shown if route
guidance is active.
3-2 Map settings
LNV3010
7
Direction indicator and distance to next ma-
䊐
neuver on the route:
When route guidance is active but you have
deviated from the route, this area displays a
compass icon with an arrow indicating the
destination direction.
When route guidance is active and you are
on the route, this area indicates the distance (in miles or kilometers) to the next
point and the turning direction at that point.
When the “Voice” key is not shown on the
screen (such as when an audio screen is
displayed on the screen), touch the direction indicator to repeat the voice guidance
while a route is active. Touch and hold for
two seconds to toggle the voice guidance
on or off.
8
Estimated time of arrival and distance to
䊐
destination or remaining time of travel and
distance to destination:
Touch this button to switch the indicator between estimated arrival time and remaining
travel time. This indicator only appears once
the destination is set and the route guidance
is initiated. The estimated arrival time may
not switch to the estimated arrival time for
the destination’s time zone if a time zone line
is crossed as part of the route.
MAP TYPES
9
Posted speed limit:
䊐
When available, the posted speed limit for
the current road is displayed.
10
NissanConnect
䊐
equipped):
Touch the headset icon to connect to NissanConnect
11
Current road indicator:
䊐
This displays the name of the road upon
which the vehicle is currently traveling.
12
Vehicle icon:
䊐
Indicates the current location and direction
of the vehicle.
13
Suggested route:
䊐
Appears as a bold blue line during route
guidance.
14
Scale indicator:
䊐
Indicates the scale of the map.
15
Compass icon:
䊐
Indicates the direction of the map. Touch
this icon to switch the map view between
the North Up, Heading Up (or actual direction) and 3D modes.
SM
Services (if so
SM
Services.
“NISSANCONNECT SERVICES” (page 6-4)
16
Zoom in and zoom out keys:
䊐
Touch to zoom the map perspective in or
out.
17
“Options” key:
䊐
Touch this key to access the map options
menu screen.
“MAP OPTIONS MENU
SCREEN” (page 3-5)
2D
LNV2455
2-DIMENSIONAL (2D) VIEW
The 2D map is a two-dimensional (flat) representation of the map data, similar to a road map,
focused on the vehicle’s position (vehicle icon).
Touch the compass icon to switch map to another view.
“SCREEN INFORMATION (2D, 2DN
or 3D)” (page 3-2)
“MAP SETTINGS FOR THE MAP
SCREEN” (page 3-7)
Map settings 3-3
MOVING A MAP
2DN
2-DIMENSIONAL NORTH UP (2DN)
VIEW
The 2DN map is a two-dimensional (flat) representation of the map data, similar to a road map,
focused on the vehicle’s position (vehicle icon)
with the top of the map aligned North.
Touch the compass icon to switch map to another view.
LNV2454
3D
3-DIMENSIONAL (3D) VIEW
The 3D map displays the map from an elevated
perspective, providing a panoramic view over a
long distance.
The map in 3D view always appears with the current forward direction facing up (heading up).
Touch the compass icon to switch map to another view.
3-4 Map settings
LNV2456
LNV2463
To scroll the map in either direction:
1. Touch and release the screen anywhere on
the map.
2. Touch the screen again and move your finger along the screen in the direction you
wish to scroll.
After releasing and touching the map again, a
marker will be displayed at the point touched
and, if possible, the position determined.
NOTE:
When the current location of the vehicle is
recognized, the street name will be displayed at the bottom of the screen. When
scrolling a map and an area that is not a
road, city or POI is touched, coordinates
corresponding to the marker’s position are
displayed at the bottom of the screen.
MAP OPTIONS MENU SCREEN
RETURNING TO THE CURRENT VEHICLE LOCATION
The basic map screen displays the current location of the vehicle. The current location can be
displayed again even after the map is moved, or
after the menu screen is displayed.
Press the MAP button or the BACK or
BACK button and the current location will be
displayed on the map.
LNV3002
The Map Options menu allows you to quickly
store the current position, show position information or destination information, and adjust the
map settings.
1. Touch the “Options” key while the route
guidance map is displayed.
2. The following options are available for selection:
● Enter Destination
Select to open the navigation screen for
entering an address.
● Turn List
Select to display all of the turns and waypoints along the route.
● Cancel Route
Select to cancel entire route or waypoints along route.
● POIs Along Route
Select to choose the types of points of
interest to display along the active route.
Available options are gas stations,
restaurants, ATMs, parking, rest areas,
hotels, dealerships and airports.
NOTE:
Some places of interest on divided highways may show the equivalent place of interest on the opposite side of the road
(such as a rest area) as being closer than
the place in your traveling direction. Confirm location of the place before following
the route.
● SiriusXM Traffic
Select to display all traffic events on
route and options to avoid roads along
route.
● Show Route On Map
Select to display the entire route on the
screen. The view will zoom to the necessary level in order to show both the starting point and destination on the screen.
Map settings 3-5
CHANGING THE MAP SCALE
● Routing Options
Select to view options available to customize route. Avoiding specific roads, dynamic guidance, route type and minimizing freeways, types of roads and ferries
can all be adjusted.
● Show Position Information
Select to display the latitude, longitude
and altitude for the current position of the
vehicle. Location can also be stored to
the Address Book.
● Show Waypoints
Select to add or show list of waypoints
along route.
● Guidance & Map Settings
Select to toggle guidance information
and map settings options.
“MAP SETTINGS FOR THE
MAP SCREEN” (page 3-7)
LNV2462
When using the “+” or “-” for zooming in or out,
the scale on the bottom left side of the screen
changes to indicate the new scale level.
MAP SCALE
The following scales are available depending on
the map view:
Per approximately 1/2 inch (1 cm)
150 ft (50 m)
300 ft (100 m)
600 ft (200 m)
1/4 mile (500 m)
1/2 mile (1 km)
1 mile (2 km)
2.5 mi (5 km)
5 mi (10 km)
10 mi (20 km)
25 mi (50 km)
50 mi (100 km)
100 mi (200 km)
250 mi (500 km)
3-6 Map settings
LOOKING AT INFORMATION ON THE
MAP
Icons of various categories of locations can be
displayed on the map.
MAP SYMBOLS
This navigation system uses symbols to display
various types of facilities. The following icons (if
so equipped) may be used on the map screen.
Map settings 3-7
3-8 Map settings
LNV2467
MAP SETTINGS FOR THE MAP
SCREEN
LNV3000 LNV3006
Other settings are available for the map screen,
such as switching the map view or changing the
map direction.
1. Press the
button.
2. Touch the “Settings” key.
Menu Item Options
Voice Guidance Select to toggle on or off the voice guidance on map screen.
Volume Select “+” or “-” to increase or decrease voice guidance volume.
Map View Touch the “Map View” key to toggle between 2D and 3D map view.
2D-North/Heading Up Touch to toggle display between “Head” and “North” for 2D mode. When “Head” is selected, the screen always shows the map
Auto Zoom Touch the “Auto Zoom” key to choose a setting for automatic zooming. Available settings are “Never”, “Always” and “Only with a
Show Points of Interest On Map Select to toggle various map icons on and off including gas stations, restaurants, banks and parking.
in the driving direction. When “North” is selected, the top of the map is always orientated north. This option can only be selected
when the “Map View” is set to 2D.
route”.
3. Touch the “Navigation” key.
4. Touch the “Guidance & Map Settings” key.
When selected, the system will offer the following map setting options:
Map settings 3-9
Menu Item Options
My Points of Interest Alert Select to control alert options. Choose “Off” to disable the alert. Choose “Show Only” to have the alert displayed on the screen.
Show Presets On Map Select to toggle on or off the preset radio station buttons on the map screen.
Split Map for Freeway Exits Select to toggle on or off the split view map when approaching a freeway exit.
Show Lane Information Select to toggle on or off lane information when available.
Show Speed Limit Select to toggle on or off the display of speed limit information when available.
Show Estimated Time Select to control display of estimated time of arrival or trip time remaining.
Customize Travel Speed Select to customize travel speeds on local roads and freeways along route.
Speed Limit Warning Select to control the speed limit alert that activates when the vehicle speed is greater than the speed limit information for the cur-
Speed Limit Sensitivity Select the sensitivity level for the speed limit warning. Choose a value between zero and 30
Speed Warning for Curves Select to control the alert that activates depending on vehicle speed and a curve in the road ahead. Choose “Off” to disable the
Distance Units Select to toggle “US” or “Metric” for the distance units on the map screen.
Choose “Show & Beep” to have an audible beep in addition to the alert displayed on the screen.
rent location. Choose “Off” to disable the alert. Choose “Show Only” to have the alert displayed on the screen. Choose “Show &
Beep” to have an audible beep in addition to the alert displayed on the screen.
alert. Choose “Show Only” to have the alert displayed on the screen. Choose “Show & Beep” to have an audible beep in addition
to the alert displayed on the screen.
3-10 Map settings
LANE INFORMATION MAP SD-CARD
LNV2464 LNV2465
When the vehicle is approaching a junction or
interchange, the screen switches to a split view.
Lane information is graphically displayed on the
left side of the split screen and icons showing
the proper lanes for upcoming maneuvers are
shown in the upper right corner below the clock.
The highlighted lanes are those from which the
next maneuver on the route will be made. Lanes
displayed in gray are those that do not follow the
route at the upcoming junction or interchange.
The icons in the upper right corner also indicate
direction and may change as the junction or interchange approaches (for example, straight
ahead, to straight and then right).
Once the vehicle passes through the junction or
interchange, the screen returns to the previous
view. Touching the screen also returns to the
previous view.
NOTE:
Lane information is not available for all
areas. It will only be displayed in areas
where the necessary map data is available.
NOTE:
The number of lane icons in the upper right
corner may change as the junction or interchange approaches due to a difference in
the number of available lanes.
Type A
LNV3016
The SD-card slot is located on the front of the
unit. When you purchase this system, an SDcard with map data is provided.
Map settings 3-11
Loading...