Ninja CB350EU Blender 1200W (2,1/0,7/1,8 Liter) Quick Start Guide [EN]

Page 1
Cleaning
STUCK-ON INGREDIENTS
IN THE POWER NUTRI™ BOWL?
NOTE: For best results, use a dishwasher to remove stuck-on ingredients .
1. Rinse the bowl and blade assembly
under WA RM WATE R after processing.
Please make sure to read the enclosed Ninja® Instructions prior to using your unit.
2. Fill the bowl with warm water up to the top of the Power Paddle and add 1 or 2
SMALL DROPS of washing-up liquid.
3. Select MIX and press START/STOP.
Twist the Power Paddle anti-clockwise continuously while processing.
4. Once complete, empty contents and
rinse under warm water.
NOTE: The Power Paddle in the Power Nutri™ Bowl is not removable.
STUCK-ON INGREDIENTS IN THE JUG OR CUP:
Fill jug with warm water up to the DOUGH MAX line and add
1 or 2 small drops of washing-up liquid. For the cup, fill halfway with warm
water and add 1 small drop of washing-up liquid. Run the MIX program.
Once complete, empty contents and rinse under warm water.
Refer to the Instructions for more information.
Dishwasher
Containers, lids
and blade assemblies
are all dishwasher safe.
WARNING: Handle the blade assemblies with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.
For questions or to register your product, visit us online at ninjakitchen.co.uk
soapy water. When washing the blade assemblies, use a
dishwashing utensil with a handle. Use the included cleaning
brush to remove excess residue, such as when dealing with
1 OR 2 SMALL DROPS OF WASHING- UP LIQUID
WATER TO TOP OF POWER PADDLE
Hand-Washing
Wash containers, lids and blade assemblies in warm,
stuck-on ingredients, like doughs and batters.
POWER NUTRI™ BLENDER 3-IN-1
QUICK START
GUIDE
What’s in the Box
Base
2.1L Power Nutri™ Jug
Total Crushing®
& Chopping Blade
Assembly
(Stacked Blade Assembly)
Dough Blade
Assembly
@ninjakitchenuk
© 2020 Sh arkNinja Operating LLC.
AUTO-IQ, FOODI, N INJA an d TOTAL CRUSH ING are registe red trademarks at Sha rkNinja Oper ating LLC .
HYBRID EDG E and POWER NUTRI are tradema rks of Sh arkNi nja Operating L LC.
CB350UK_QSG_MP_201210_MV1
700ml Power
Nutri Cup
400ml Power Nutri™
Bowl with built-in
Power Paddle &
Storage Lid
Hybrid Edge™
Blades Assembly
Cleaning Brush
Use to remove excess residue when cleaning, such as when dealing with stuck-on ingredients, like doughs and batters.
Page 2
AUTO-iQ®
MODE
MANUAL
MODE
Intelligent preset programs combine unique blending and pausing patterns
that do the work for you. Once a preset program is selected, it will start
immediately and automatically stop when blending is complete.
DIAL
Use the dial to select the desired program,
then press START/STOP to begin.
POWERMIX
BLEND
CRUSH
MIX
PUREE
CHOP
Use the power button to
POWER
turn the unit on or o.
Go manual for total control of your blending speed and textures. Dial down the speed
for heavy loads like dough, or crank up the speed for smoothies. Continuously runs up
to 60 seconds. Press START/STOP at any time to end program sooner.
NOTE: In Manual mode, Auto-iQ® programs will not illuminate on the control panel.
DIAL
Turn the dial from speed 1 to speed 10. Press
START/STOP to begin and end blending.
NOTE: Only speed 10 is available when
using the Power Nutri™ Bowl or Cup.
IQ/MANUAL
Toggle between Auto-iQ
Mode and Manual Mode.
NOTE:
The unit can detect if the jug or the cup/bowl is installed on the motor base.
Only the programs available for a particular container will illuminate on the control panel.
Use the Power Nutri™ Jug with these
programs for blending and processing
BLEND
Fruit Smoothie
Milkshakes
MIX
Smoothie Bowl
Sorbet
PUREE
Sauces
Dips
CRUSH
Ice Drink
Green Smoothie
CHOP
Salad
Vegetables
Use the Power
Nutri™ Cup with the
drinks programs
BLEND
Fruit Smoothie
Milkshakes
CRUSH
Ice Drink
Green Smoothie
Use the Power Nutri™
Bowl with these
programs to create
thicker outputs
POWERMIX
Houmous
Pâté
Smoothie Bowl
Frozen Yogurt
MIX
USING TOTAL SPEED CONTROL
NOTE: ONLY USE SPEEDS 1 OR 2 WHEN USING THE DOUGH BLADE ASSEMBLY.
START
SLOW
Always start at a low
speed (1–3) to better
incorporate ingredients
and prevent them from
sticking to the sides
of the vessel.
PULSE
Use short presses for short pulses
and long presses for long pulses.
& THE JUG
DIAL UP
THE SPEED
Smoother blends call
for higher speeds. Low
speeds are great for
chopping vegetables
and mixing dough, but
you’ll need to ramp up for
purees and dressings.
HIGH-SPEED
BLENDING
Blend until your
desired consistency
is reached. The longer
you blend, the better
the breakdown
and smoother the
outcome will be.
Page 3
OR
Assembling the Jug
Dough making
Loading tips for making dierent doughs and batters.
1.
Holding the blade
assembly by the top
of the shaft, insert
it into the jug.
PRESS THE POWER BUTTON TO TURN THE UNIT ON.
1.
Use the dial to select an Auto-iQ® program
or manual speed, then
press START/STOP to
begin blending.
2.
Fill jug with desired ingredients.
Install the lid, then lower lid handle
to lock in place.
Blending
2.
When blending is
complete, turn jug
anti-clockwise and lift
to remove.
3.
Place jug on base. Slightly
align handle to the right
so the LOCK symbols are
visible on the motor base.
Rotate clockwise until jug
clicks into place.
3.
To pour out thinner
mixtures, ensure lid is
locked in place, then
open pour spout.
COOKIES
Unit can make a max of 24 28g cookies at a time.
1 Add sugars, cubed softened butter, eggs and
liquids (such as vanilla extract). Press IQ/ MANUAL, then use the dial to select Speed 2. Press START/STOP and mix until fully combined.
2 Add all dry ingredients, then run on Speed 2 until
combined.
3 Remove dough blade and add mix-ins (such as
chocolate chips, raisins and nuts). Stir to combine.
PASTRIES, PIES & SCONES
Unit can make 8 scones and one 30cm round pie crust at a time.
1 First add dry ingredients, cubed cold butter or
shortening. Press IQ/MANUAL, then use the dial to select Speed 2. Press START/STOP and mix until fully combined.
2 Add cold liquids (such as cold milk or water) and
run on Speed 2 until combined.
3 Remove dough ball and knead to combine,
if needed.
Food prep
PIZZAS, PRETZELS, BAGELS & BREAD DOUGHS
Unit can make a max of one 30cm round pizza, 8 pretzels or bagels, or one loaf bread at a time.
1 First add liquids (such as water), yeast and oil.
Then add dry ingredients. Press IQ/MANUAL, then use the dial to select Speed 2. Press START/ STOP and mix until fully combined.
2 Remove dough ball and knead to combine,
if needed.
CAKES, BROWNIES, MUFFINS & QUICK BREADS
Unit can make a max of one 30cm round cake, one 20cm x 20cm tin brownies, 12 muffins or one 20cm x 10cm loaf of quick bread, such as banana bread or pumpkin bread.
1 Add sugars, softened cubed butter/oils, eggs
and liquids (such as vanilla extract). Press IQ/ MANUAL, then use the dial to select Speed 2. Press START/STOP and mix until fully combined.
2 Add all dry ingredients, then run on Speed 2 until
combined.
3 Add mix-ins (such as chocolate chips, raisins and
nuts). Press iQ/Manual and, with Speed 1 selected, press START/STOP. Blend until combined.
NOTE: Only use speeds 1 or 2 when using the Dough Blade Assembly.
For thicker mixtures
Press RELEASE button and lift handle to remove lid, then carefully lift out blade assembly before removing contents. Remove contents from blade assembly by using a spatula.
WARNING: Blade assembly is sharp and not locked in place. Make sure lid is locked onto jug before pouring contents. If pouring without lid, carefully remove blade assembly first. Failure to do so will result in a risk of laceration. Refer to the Ninja Instructions for additional information.
PREPPING VEGETABLES
• Cut both ends o ingredients and remove any outer peels or skins.
• Cut ingredients such as carrots, cucumber, celery and courgette in 5cm pieces and broccoli or cauliflower florets into 2cm pieces. Cut ingredients such as onions in quarters.
CHOP PROGRAM
• Timed pulses and pauses give you consistent chopping results.
PREPPING MEAT
• Trim excess fat and connective tissue. Cut meat in 5cm cubes.
• Run program once for a large chop, twice for a small chop and three times for a mince.
Page 4
Assembling the Power Nutri™ Bowl & Power Nutri™ Cup
OR
OR
DID YOU KNOW?
Smoothie bowls are
thicker & spoonable,
compared to
smoothies which are
thinner & drinkable.
SMOOTHIE BOWL
1.
Fill container with desired
contents. Screw on the
blade assembly until you
have a tight seal.
PRESS THE POWER BUTTON TO TURN THE UNIT ON.
1.
Use the dial to select an Auto-iQ® program
or manual speed, then
press START/STOP to
begin blending.
Blending
IF USING POWER
NUTRI™ CUP, SKIP STEP 2.
2.
If using the Power Nutri™
Bowl, twist the Power
Paddle anti-clockwise
continuously while
processing.
2.
Flip container upside
down and install on base.
Rotate clockwise until it
clicks into place.
3.
When blending is
complete, remove the
container from base.
Then, remove the blade
assembly from container.
BASICS
USING THE POWER NUTRI™ BOWL
1.
Add milk or a milk alternative such
as soy, coconut, almond or oat milk,
up to the LIQUID FILL line.
ALWAYS DO THIS FIRST.
3. (Optional)
Amplify your base by adding 1 scoop of yogurt, flavour powder, protein powder and/or nut butter.
2.
Add frozen fruit, directly from freezer and/or acai*, up to the MAX FILL line.
Cut larger fruit like bananas, in quarters.
*If using açai thaw slightly and
cut in quarters.
4.
Screw on the blade assembly and
install the bowl on the motor base.
Select MIX and press
START/STOP. Twist the
Power Paddle anti-clockwise
continuously while processing.
Taking It To Go?
Place the Storage Lid or Spout Lid on top of the bowl or cup and turn clockwise to seal.
NOTE: DO NOT microwave or freeze the Power Nutri™ Bowl or Power Nutri™ Cup.
WARNING: Handle the blade assembly with care, as the blades are sharp.
5.
After blending is complete, add your favourite toppings, such as coconut flakes, granola, fresh bananas, berries and agave nectar.
Loading...