Ninja BL780CO Owner's Manual

Page 1
BL780CO
®
OWNER’S GUIDE
www.ninjakitchen.com
1 877 646-5288
Page 2
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® ULTRA KITCHEN SYSTEM.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in
any way.
WARNING: Extension cords are
not recommended for use with this product.
THIS BOOK COVERS MODEL NUMBER:
BL780CO 30
TECHNICAL SPECIFICATIONS:
Voltage: 120V., 60Hz. Power: 1200 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.1 L) MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja® Cup Capacity: 16 oz. (2 cups, 470 ml)
WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause the jar to be damaged or to shatter which may cause personal injury.
2 WARNING: The blade assemblies are
sharp, not locked in place and removable, handle with care. When handling the blade assemblies, always hold by the shaft. Failure to do so will result in a risk of laceration.
3 WARNING: Stacked Blade Assembly is
sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first, holding it by the shaft. Failure to do so will result in a risk of laceration.
4 WARNING: Chopping Blade Assembly is
sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of laceration.
5 CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up, resulting in risk of the user being burned.
6 CAUTION: We do not recommend
grinding in any of our Nutri Ninja Cups.
7 CAUTION: Remove the Nutri Ninja Blade
Assembly from the Nutri Ninja cup upon completion of blending. Some ingredients have the potential to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
1
1-877-646-5288
Page 3
8 To protect against electrical shock, do not
submerge the appliance or allow the power cord to come into contact with water or any other liquid.
9 DO NOT allow young children to operate the
appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.
10 Never leave an appliance unattended when
inuse.
11 Appliance accessories are not intended to be
used in the microwave as it may result in damage to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
14 DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.
15 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove. 16 Always use appliance on a dry, level surface. 17 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running. 18 Avoid contact with moving parts. 19 DO NOT attempt to sharpen blades. 20 DO NOT use the appliance if blade assemblies
are bent or damaged.
21 To reduce risk of injury, never place the blade
assembly on base without pitcher, bowl or Nutri Ninja cup properly attached.
22 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
24 DO NOT remove the container from the motor
base while the appliance is in operation.
25 To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
26 DO NOT expose containers to extreme
temperature changes. 27 DO NOT overfill. 28 DO NOT operate the appliance empty. 29 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning. 30 In the event that the unit overloads, unit will shut
down. Unplug the appliance and let it cool down
for approximately 15 minutes before using again. 31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors. 32 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the greatest
power and other recommended attachments may
draw significantly less power or current.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
2
Page 4
Contents
Thank you for purchasing the Ninja® Ultra Kitchen System.
Getting to Know Your Ninja Ultra Kitchen System ................................................................. 4
Before First Use ............................................................................................................... 5
Assembly and Use of the Pitcher ........................................................................................ 6
Assembly and Use for the Nutri Ninja® Cup ......................................................................... 8
Assembly and Use of the Food Processor Bowl ................................................................... 9
Speed Setting & Uses ...................................................................................................... 11
Care & Maintenance ....................................................................................................... 12
Troubleshooting Guide ..................................................................................................... 13
Replacement Parts .......................................................................................................... 13
Warranty & Registration ................................................................................................... 14
CRUSH
BLEND
DOUGH
FEATURES:
• Total Crushing® Technology
• Extra Large, 72 oz. Pitcher (MAX Liquid Capacity: 64 oz.) - BPA Free
• 64 oz. Food Processor Bowl with Drizzle Hole - BPA Free
• Nutri Ninja Cup - BPA Free
• Lock–In Lid, Featuring Pour Spout
• Easy to Clean Electronic Control Panel
• Sturdy, Non-Slip Base
• Hidden Drain Holes - prevent water build up from dishwasher
3
1-877-646-5288
Page 5
Getting To Know Your Ninja® Ultra Kitchen System
a
b c
d
h
k
CRUSH
BLEND
DOUGH
a Nutri Ninja Cup (x3)
b Nutri Ninja To-Go Lid (x3)
c Nutri Ninja Blade Assembly
d Food Processor Bowl
e Bowl Lid with Locking Handle
f Chopping Blade Assembly
g Dough Blade Assembly
e
f g
j
i
h Pitcher
i Pitcher Lid with Locking Handle
j Stacked Blade Assembly
k Motor Base
l Power Cord (not shown)
NOTE: Attachments are not interchangeable.
www.ninjakitchen.com
4
Page 6
Before First Use
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it may result in damage to the accessories.
WARNING: Stacked Blade Assembly is sharp and not locked in place. If using the pour spout, ensure the lid is fully locked onto the pitcher. Failure to do so will result in a risk of laceration.
WARNING: Stacked Blade Assembly is sharp and not locked in place. If pouring with the lid removed, carefully remove the Stacked Blade Assembly first, holding it by the shaf t. Failure to do so will result in a risk of laceration.
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of laceration.
CAUTION:
Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, pitcher, bowl, Nutri Ninja® cups and
Blade Assemblies in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are very sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, bowl, Nutri Ninja cups, lids and Blade
Assemblies are all dishwasher safe. It is recommended that the lids and Blade Assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
5
1-877-646-5288
Page 7
Assembly and Use of the Pitcher
DOUGH
BLEND
CRUSH
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
CRUSH
BLEND
DOUGH
Fig. 3a
OR
CRUSH
BLEND
DOUGH
CRUSH
BLEND
DOUGH
Fig. 3b
Fig. 4
Fig. 5Fig. 2
Fig. 1
CRUSH
BLEND
DOUGH
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4 Rotate the pitcher clockwise until it locks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base. (Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the “Max liquid” mark (64 oz.) on the pitcher
8 Holding the lid by the handle in the upright position,
place it on top of the pitcher aligning the arrow ( ) located on the lid with the arrow ( ) located on the pitcher’s handle. (Fig. 5) Press the handle down until you hear a click.
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power button ( ) will be solid, indicating that the appliance is ready for use.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
www.ninjakitchen.com
6
Page 8
Assembly and Use of the Pitcher - cont.
USE REMOVAL
CRUSH
BLEND
CRUSH
BLEND
DOUGH
DOUGH
CRUSH
BLEND
CRUSH
BLEND
DOUGH
DOUGH
10 Review warning and caution statements on page 6
before proceeding.
11 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
12 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the stacked blade assembly to stop turning.
(Fig. 7)
13 To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig. 8)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
7
1-877-646-5288
Fig. 8Fig. 7Fig. 6
Fig. 9
14 Open the pour spout cap and use the spout to empty
liquid contents.
15 For thicker consistencies, remove the lid and blade
stacked blade assembly carefully (by its shaft), then empty contents from the container. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle and lift the lid off the pitcher.
16 Make sure that the unit is unplugged when not in use.
17 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 9)
Page 9
Assembly and Use of the Nutri Ninja® Cup
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
DOUGH
BLEND
CRUSH
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY USE REMOVAL
CRUSH
Fig. 1
Fig. 2
BLEND
DOUGH
Fig. 3
BLEND
DOUGH
For best results, use short “PULSES”... Practice makes perfect!!
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja cup.
4 Place the Nutri Ninja blade onto the cup and screw it
tightly until you have a good seal. ( Fig. 1)
5 Turn the Nutri Ninja cup upside down and place it
onto the motor base, aligning the tabs on the cup with
the motor base. Turn the Nutri Ninja cup clockwise to
lock into place. You will hear a click when the lock is
engaged. (Fig. 2) Turn the power button on, the Single
Serve button will illuminate.
6 Press down on the Single Serve button in short
intervals to activate. (Fig. 3)
7 Once you have reached your desired consistency, turn
the power button off and wait for the blade assembly to
stop turning. Turn the Nutri Ninja cup counter clockwise
and pull straight up to remove. (Fig. 4, Fig. 5)
CRUSH
Fig. 4
CRUSH
BLEND
DOUGH
Fig. 5
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max” fill line.
8 Turn the cup upright and remove the Nutri Ninja blade
by twisting the blade assembly clockwise.
9 Place the To-Go drinking lid onto the Nutri Ninja cup,
twist to seal and enjoy!
10 Make sure that the motor base is unplugged when not
in use.
11 To release the motor base from
the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.
www.ninjakitchen.com
CRUSH
BLEND
DOUGH
CRUSH
BLEND
DOUGH
8
Page 10
Assembly and Use of the Food Processor Bowl
DOUGH
BLEND
CRUSH
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do so will result in a risk of
laceration. WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
CRUSH
BLEND
DOUGH
Fig. 3a
OR
CRUSH
BLEND
DOUGH
Fig. 2
CRUSH
BLEND
DOUGH
Fig. 3b
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Align and lower the Bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the “LOCK
symbol on the motor base.
4 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 2)
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the desired blade assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 4)
NOTE: The blade assembly will fit loosely on the drive
gear.
7 Add the ingredients to the bowl, making sure that they
DOUGH
BLEND
CRUSH
Fig. 4 Fig. 5Fig. 1
do not exceed the highest measured marking line on the side of the bowl.
8 Holding the lid by the handle in the upright position,
place it on top of the bowl aligning the arrow ( ) located on the lid with the arrow ( ) located on the bowl’s handle. (Fig. 5) Press the handle down until you hear a click.
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the lid and pour the liquid slowly into the mixture.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
IMPORTANT: As a safety feature, the power
button ( ) will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power but ton ( ) will be solid, indicating that the appliance is ready for use.
9
1-877-646-5288
Page 11
USE
CHOPPING BLADE
ASSEMBLY
CRUSH
BLEND
DOUGH
REMOVAL
USE
DOUGH BLADE
ASSEMBLY
CRUSH
BLEND
CRUSH
BLEND
DOUGH
CRUSH
BLEND
DOUGH
CRUSH
BLEND
DOUGH
DOUGH
Fig. 1
Fig. 2
Fig. 3
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements at the top of
page 9 before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
6 Plug the power cord into the electrical outlet and press
on the power button ( ). (Fig. 2) Select the speed
that best suits your needs. Pulse ingredients for even
chopping by pressing down in short intervals.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the Chopping Blade Assembly to stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you. (Fig. 4)
Fig. 4
Fig. 5
USING THE DOUGH BLADE ASSEMBLY
IMPORTANT: Use only the “DOUGH” button when
using this attachment.
1 Review warning and caution statements at the top of
page 9 before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. base to make sure that the suction cups adhere to the counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the Dough Blade Assembly fits around the gear shaft and that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 5)
6 Plug the power cord into the electrical outlet and press
on the power button ( ).
7 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
8 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
9 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 4)
Press down on the motor
www.ninjakitchen.com
10
Page 12
Speed Setting & Uses
FUNCTION CONTAINER ATTACHMENT
Nutri Ninja®
Blending
Mincing Nutri Ninja Cup
Kneading Bowl Dough Blade Assembly Dough
Dough Mixing Bowl Dough Blade Assembly Dough Cookie dough
Processing
Emulsifying Bowl
Grinding Bowl
Grating
Chopping
Mixing Bowl Dough Blade Assembly Dough
Ice Crushing
Pureeing
Nutri Ninja Cup
Pitcher
Bowl
Nutri Ninja Cup
Bowl
Nutri Ninja Cup
Pitcher
Bowl
Nutri Ninja Cup
Pitcher
Nutri Ninja Cup
Pitcher
Nutri Ninja Cup
Nutri Ninja Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Chopping Blade
Assembly
Chopping Blade
Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Chopping Blade
Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
Stacked Blade Assembly
Nutri Ninja Blade
Assembly
SPEED
BUTTON
Single Serve
Single Serve
Blend Pulse
Single Serve
Blend
Blend Meat
Crush Pulse
Single Serve
Pulse
Single Serve
Crush
Crush
Single Serve
Crush
Single Serve
TYPE OF FOOD
Salad Dressings
Grated cheese Bread crumbs
Light cake mixes
Smooth soups*
Smoothies
Frappes
Milk Shakes
Onion Garlic Herbs
Bread dough
Pie dough
Pizza dough
Pretzel dough
Pâtés
Stewed fruits
Dips
Apple sauce
Spreads
Soups*
Baby food
Dips
Sauces*
Spices
Salsa
Vegetables
Nuts
Batters
Ice
Smoothies
Milkshakes
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja® containers are not intended for
hot blending.
11
1-877-646-5288
Page 13
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2
Hand Washing: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids and
blade assemblies are top rack dishwasher safe. Ensure
the blade assembly is removed from the container
before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3
Wipe the motor base clean with a damp cloth
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
.
HOW TO STORE
1 Store the Ninja® Ultra Kitchen System upright with
the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm. Loosely w
rap the power cord around the cord wrap on the
back of the motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja® Ultra Kitchen System features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.
www.ninjakitchen.com
12
Page 14
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overheated or overloaded. Unplug and wait approximately 15 minutes before usingagain.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Food is Chopped Too Fine or is Too Watery.
Food Collects On Lid or On the Sides of the Container.
You Cannot Achieve Snow From Solid Ice.
Motor Base Won’t Stick to Counter or Table Top.
Replacement Parts
Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.
The food has been over processed. Use pulse button for controlled processing.
The mixture is to thick. Add more liquid.
Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.
Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.
13
1-877-646-5288
Page 15
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year
from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at , call 1 (877) 646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found to be defective in material or workmanship, SharkNinja Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you
insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your
package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
www.ninjakitchen.com
14
Page 16
SharkNinja Operating LLC US: Newton, MA 024 59 CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © SharkNinja Operating LLC 2016
Ninja, Nutri Ninja, and Sip & Seal are registered trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
Printed in China
BL780CO_30_IB_160225_2
Loading...