Ninja BL780 Owner's Manual

Download

BL780

OWNER’S GUIDE

www.ninjakitchen.com

1 877 646-5288

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE

USING YOUR NINJA

SUPRA KITCHEN

SYSTEM.

POLARIZED PLUG

WARNING: To reduce the risk

of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician to install the proper outlet. DO NOT modify the plug in any way.

WARNING: Extension cords are

not recommended for use with this product.

THIS BOOK COVERS MODEL NUMBER:

BL780

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz. Power: 1200 Watts Pitcher Capacity: 72 oz. (9 cups, 2.15 L)

MAX Liquid Capacity: 64 oz. (8 cups, 1.9 L) Bowl Capacity: 64 oz. (8 cups, 1.8 L) Nutri Ninja

Cup Capacity: 16 oz. (2 cups, 470 ml)

WARNING: TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK OR INJURY:

WARNING: Remove utensils prior to

processing.

2 CAUTION: Blade assemblies are

sharp, not locked in place and removable, handle with care. When handling the blade assemblies, always hold them by the shaft.

3 CAUTION: Blade Assemblies are not

locked in place and are removable. If using the pour spout, ensure the lid is fully locked onto the pitcher. If pouring with the lid removed, ALWAYS remove the blade assembly ﬁrst.

4 CAUTION: Do not blend hot liquids. 5 CAUTION: We do not recommend

grinding in any of our Nutri Ninja® Cups.

6 To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

7 DO NOT allow the appliance to be used by

children. Close attention is necessary when used near children. This is not a toy.

8 Never leave an appliance unattended when

inuse.

9 Appliance accessories are not intended to

be used in the microwave as it may result in damage to the accessories.

10 Turn the appliance Off and remove the power

cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

11 DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

12 DO NOT operate any appliance with

a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. This appliance has no serviceable parts. Return the appliance to SharkNinja Operating LLC for examination, repair or adjustment.

13 DO NOT let the power cord hang over

the edge of table or counter or touch hot

surfaces such as the stove. 14 Always use appliance on a dry, level surface. 15 Keep hands, hair, clothing, as well as utensils

out of container while processing to reduce the

risk of severe injury to persons or damage to

the appliance. A scraper may be used but only

when the appliance is not running. 16 Avoid contact with moving parts. 17 DO NOT attempt to sharpen blades. 18 DO NOT use the appliance if blade

assembly is bent or damaged. 19 To reduce risk of injury, never place the

blade assembly on base without pitcher or

bowl properly attached. 20 DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric

burner or in a heated oven). 21 The use of attachments or accessories

including canning jars, not recommended by

the manufacturer may result in ﬁre, electric

shock or personal injury.

22 DO NOT remove the container from the

motor base while the appliance is in operation.

23 To reduce the risk of injury, NEVER operate

the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

24 DO NOT expose containers to extreme

temperaturechanges. 25 DO NOT overﬁll. 26 DO NOT operate the appliance empty. 27 To reduce the risk of burns, always allow

the appliance to cool before taking off parts

and before cleaning. 28 In the event that the unit overloads, the unit

will shut down. Unplug the appliance and let

it cool down for approximately 15 minutes

before using again. 29 THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use

this appliance for anything other than its

intended use. Do not use outdoors. 30 The maximum rating is based on the

Stacked Blade Assembly (pitcher) that

drives the greatest power and other

recommended attachments may draw

signiﬁcantly less power or current.

SAVE THESE

INSTRUCTIONS

1 2

www.ninjakitchen.com1-877-646-5288

Thank you for purchasing the Ninja® Supra Kitchen System.

Contents

Getting to Know Your Ninja Supra Kitchen System ............................................................... 4

Using the Ninja Supra Kitchen System ............................................................................... 5

Assembly and Use for the 72 oz. Pitcher ............................................................................. 6

Assembly and Use for the Nutri Ninja® Cup ......................................................................... 8

Assembly and Use for the 64 oz. Bowl ................................................................................ 9

Speed Setting & Uses ...................................................................................................... 11

Care & Maintenance ....................................................................................................... 12

Troubleshooting Guide ..................................................................................................... 13

Replacement Parts .......................................................................................................... 13

Warranty & Registration ................................................................................................... 14

Getting To Know Your Ninja® Supra Kitchen System

b c

f g

CRUSH

BLEND

DOUGH

CRUSH

BLEND

DOUGH

FEATURES:

• Total Crushing® Technology

• Extra Large, 72 oz. Pitcher (MA X Liquid Capacity: 64 oz.) - BPA Free

• 64 oz. Bowl - BPA Free

• Nutri Ninja

• Lock–In Lid, Featuring Pour Spout

• Easy to Clean Electronic Control Panel

• Sturdy, Non-Slip Base

Cup - BPA Free

a Nutri Ninja

b Nutri Ninja To-Go Lid (x2)

c Nutri Ninja Blade Assembly

d 64 oz. Bowl

e Bowl Lid with Locking Handle

f Chopping Blade Assembly (bowl)

g Dough Blade Assembly (bowl)

Cup (x2)

h 72 oz. Pitcher

i Pitcher Lid with Locking Handle

j Stacked Blade Assembly (pitcher)

k Motor Base

l Power Cord (not shown)

NOTE: Attachments are not interchangeable.

• Hidden Drain Holes - prevent water build up from dishwasher

3 4

www.ninjakitchen.com1-877-646-5288

Using the Ninja® Supra Kitchen System

DOUGH

BLEND

CRUSH

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

WARNING: Never leave the appliance

unattended while in use.

WARNING: Secure the appliance while in use

by pressing down on the lid with one hand.

CAUTION: Blade assemblies are sharp, not

locked in place and removable, handle with care. When handling the blade assemblies, always hold them by the shaft.

CAUTION: Do not blend hot liquids.

CAUTION: Never remove the container while

the appliance is still running.

CAUTION: We do not recommend grinding in

any of our Nutri Ninja® Cups.

IMPORTANT: Never add ingredients into the

container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it may result in damage to the accessories.

CAUTION: Blade Assemblies are not locked in place and are removable. If using the pour spout, ensure the lid is fully locked onto the blender pitcher.

CAUTION: Blade Assemblies are not locked in place and are removable. If pouring with the lid removed, ALWAYS remove the Blade Assembly ﬁrst.

CAUTION: Blade assemblies are sharp, not locked

in place and removable, handle with care. When handling the blade assemblies, always hold them by the shaft.

BEFORE FIRST USE

1 Remove all packaging material and labels from the

appliance.

2 Wash the lids, pitcher, bowl, Nutri Ninja cups and blade

assemblies in warm, soapy water with a soft cloth.

CAUTION: Handle the blade assemblies with care

when washing, as the blades are very sharp.

3 Rinse and dry thoroughly.

4 The pitcher, bowl, Nutri Ninja cups, lids and blade

assemblies, are all dishwasher safe. It is recommended that the lids and blade assemblies be placed on the top rack. Ensure that the blade assemblies are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

Assembly and Use for the 72 oz. Pitcher

WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged

or to shatter, which may cause personal injury. CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

CRUSH

BLEND

DOUGH

Fig. 1

CRUSH

BLEND

DOUGH

Fig. 2

Fig. 3b

1 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

2 Align and lower the Pitcher onto the motor base.

(Fig. 1) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

3 Rotate the pitcher clockwise until it locks in place. You

will hear a click when the lock is engaged. (Fig. 2)

4 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 4)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

6 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line

on the side of the pitcher.

CRUSH

BLEND

DOUGH

Fig. 3a

Fig. 4

Fig. 5

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap and pour the ingredients in through the opening.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the “Max liquid” mark (1.9 L) on the pitcher

7 Plug the power cord into the electrical outlet and press

the power button (

IMPORTANT: As a safety feature, the power

button (

) will ﬂash and the motor will not work if the pitcher and lid are not installed correctly. When the pitcher and lid are installed properly, the power button ( ) will be solid, indicating that the appliance is ready for use.

8 Holding the lid by the handle in the upright position,

place it on top of the pitcher aligning the arrow ( located on the lid with the arrow ( ) located on the pitcher’s handle. (Fig. 5) Press the handle down until you hear a click.

CRUSH

BLEND

DOUGH

)

5 6

www.ninjakitchen.com1-877-646-5288

Assembly and Use for the 72 oz. Pitcher - cont.

DOUGH

BLEND

CRUSH

DOUGH

BLEND

CRUSH

DOUGH

BLEND

CRUSH

DOUGH

BLEND

CRUSH

DOUGH

BLEND

CRUSH

DOUGH

BLEND

CRUSH

Assembly and Use for the Nutri Ninja® Cup

WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. Failure to remove may cause the cup to be damaged or to

shatter, which may cause personal injury. CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

USE REMOVAL

CRUSH

BLEND

DOUGH

Fig. 6

CRUSH

BLEND

CRUSH

BLEND

DOUGH

Fig. 8Fig. 7

CRUSH

BLEND

DOUGH

Fig. 9

WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged

or to shatter, which may cause personal injury. CAUTION: Handle the Nutri Ninja Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY USE REMOVAL

CRUSH

BLEND

DOUGH

BLEND

DOUGH

Fig. 5

Fig. 1

Fig. 2

CRUSH

BLEND

DOUGH

Fig. 3

CRUSH

BLEND

DOUGH

Fig. 4

For best results, use short “PULSES”... Practice makes perfect!!

CRUSH

9 Select the speed that best suits your needs. (Fig. 6)

NOTE: Pulse ingredients for even chopping by pressing

down in short intervals.

10 When you have reached your desired consistency, stop

the appliance by pressing the power button (

) and

wait for the Stacked Blade Assembly to stop turning.

(Fig. 7)

11 To remove the lid, press the release button on the lid,

pull the lid handle up to a 90° angle and lift the lid off. Turn the pitcher counterclockwise and then lift off the base. (Fig. 7, Fig. 8)

CAUTION: Never insert your hands in the pitcher

as the Stacked Blade Assembly is sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

12 Depending on the consistency of the contents in the

container, open the pour spout cap and use the spout to empty liquid contents. For thicker consistencies, remove the lid and Stacked Blade Assembly carefully (by its shaft), then empty contents from the container.

CAUTION: Stacked Blade Assembly is not locked in

place and is removable. If using the pour spout, ensure the lid is fully locked onto the blender pitcher.

13 For thicker consistencies, remove the lid and Stacked

Blade Assembly carefully (by its shaft), then empty contents from the container. To remove the lid, press the release button on the lid and pull the lid handle up to a 90° angle and lift the lid off the blender pitcher.

CAUTION: Stacked Blade Assembly is not locked in

place and is removable. If pouring with the lid removed, ALWAYS remove the Stacked Blade Assembly ﬁrst.

14 Make sure that the unit is unplugged when not in use.

15 To release the motor base from the counter or table top,

1 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

2 Add ingredients to the Nutri Ninja cup.

3 Place the Nutri Ninja Blade Assembly onto the cup and

screw it tightly until you have a good seal. (Fig. 1)

4 Turn the Nutri Ninja cup upside down and place it

onto the motor base, aligning the tabs on the cup with

the motor base. Turn the Nutri Ninja cup clockwise to

lock into place. You will hear a click when the lock is

engaged. (Fig. 2) Turn the power button on, the Single

Serve button will illuminate.

5 Press down on the Single Ser ve button in short

intervals to activate. (Fig. 3)

6 Once you have reached your desired consistency, turn

the power button off. Turn the Nutri Ninja cup counter

clockwise and pull straight up to remove. (Fig. 4, Fig. 5)

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max” ﬁll line.

7 Turn the cup upright and remove the Nutri Ninja Blade

Assembly by twisting the blade assembly clockwise.

8 Place the To-Go drinking lid onto the Nutri Ninja cup,

twist to seal and enjoy!

9 Make sure that the motor base is unplugged when not

in use.

10 To release the motor base from

the counter or table top, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 6)

NOTE: To order additional Nutri

Ninja Cups, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 9)

7 8

www.ninjakitchen.com1-877-646-5288

CRUSH

BLEND

DOUGH

Fig. 6

Assembly and Use for the 64 oz. Bowl

DOUGH

BLEND

CRUSH

WARNING: Never leave the appliance unattended while in use. WARNING: Remove utensils prior to processing. Failure to remove may cause the container to be damaged

or to shatter, which may cause personal injury. CAUTION: Handle the Chopping Blade Assembly with care, as the blades are very sharp. CAUTION: Do not blend hot liquids.

IMPORTANT: Make sure that the motor base is plugged in for use.

ASSEMBLY

CRUSH

BLEND

CRUSH

BLEND

CRUSH

BLEND

DOUGH

REMOVAL

CRUSH

BLEND

DOUGH

CRUSH

BLEND

DOUGH

CRUSH

BLEND

DOUGH

CRUSH

BLEND

DOUGH

USEUSE

CRUSH

BLEND

DOUGH

Fig. 1

Fig. 3b

DOUGH

BLEND

CRUSH

Fig. 2

Fig. 4 Fig. 5

1 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

2 Align and lower the Bowl onto the motor base. (Fig. 1)

Handle should be aligned slightly to the right of the “LOCK”

symbol on the motor base.

3 Rotate the bowl clockwise as far as it will go to lock in

place. (Fig. 2)

4 The bowl can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 3a, Fig. 3b)

5 Holding the desired blade assembly by the top of the

shaft, place it onto the drive gear inside the bowl.

Ensure that the blade assembly is seated properly and

is standing upright. (Fig. 4)

NOTE: The blade assembly will ﬁt loosely on the drive gear.

6 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on

the side of the bowl.

Fig. 3a

7 Holding the lid by the handle in the upright position,

place it on top of the bowl aligning the arrow ( ) located on the lid with the arrow ( ) located on the bowl’s handle. (Fig. 5) Press the handle down until you hear a click.

NOTE: The 64 oz. bowl is not intended

for blending drinks. Do not overﬁll.

NOTE: To add liquids during processing,

open the drizzle hole on the top of the lid and pour the liquid slowly into the mixture.

8 Plug the power cord into the electrical outlet and press

the power button (

IMPORTANT: As a safety feature, the power

button (

) will ﬂash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power but ton ( ) will be solid, indicating that the appliance is ready for use.

Fig. 1

Fig. 2

Fig. 3

USING THE CHOPPING BLADE ASSEMBLY

1 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

2 Secure the bowl onto the motor base.

3 Holding the Chopping Blade Assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that the Chopping Blade Assembly ﬁts around the gear shaft and that it is standing straight. (Fig. 1)

4 Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 1)

5 Plug the power cord into the electrical outlet and press

on the power button ( ). (Fig. 2) Select the speed that best suits your needs. Pulse ingredients for even chopping by pressing down in short intervals.

NOTE: Please refer to “Speed Settings & Uses” chart

for suggested uses and speeds.

6 When you have reached your desired consistencey, stop

the appliance by pressing the power button ( ) and wait for the blade to stop turning.

7 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

8 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

CAUTION: If pouring from the bowl, ALWAYS

remove the blade assembly ﬁrst before pouring.

9 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 4)

Fig. 4

Fig. 5

USING THE DOUGH BLADE ASSEMBLY

IMPORTANT: Use only the “DOUGH” button when

using this attachment.

1 Place the motor base on a clean, dry, level surface such

as a counter or table top.

2 Secure the bowl onto the motor base.

3 Holding the Dough Blade Assembly by the shaft, place

it onto the gear shaft inside the bowl. Ensure that the Dough Blade Assembly ﬁts around the gear shaft and that it is standing straight. (Fig. 5)

4 Add the ingredients and secure the bowl lid onto the

bowl. (Fig. 5)

5 Plug the power cord into the electrical outlet and press

on the power button ( ).

6 To remove the lid, press the release button on the lid

and pull the lid handle up to a 90° angle. (Fig. 2)

7 Turn the bowl counter-clockwise and lift it to remove it

from the motor base. (Fig. 3)

8 To release the motor base from the counter or table top,

place your hands underneath both sides of the motor base and gently pull the unit up and towards you. (Fig. 4)

9 10

www.ninjakitchen.com1-877-646-5288

Speed Setting & Uses

Care & Maintenance

FUNCTION CONTAINER ATTACHMENT SPEED BUTTON TYPE OF FOOD

Nutri Ninja®

Blending

Mincing Nutri Ninja Cup

Kneading Bowl Dough Blade Assembly Dough

Dough Mixing Bowl Dough Blade Assembly Dough Cookie dough

Processing

Emulsifying Bowl

Grinding Bowl

Grating

Nutri Ninja Cup

Pitcher/Bowl

Nutri Ninja Cup

Bowl

Nutri Ninja Cup

Nutri Ninja Blade Assembly

Stacked Blade Assembly

Chopping Blade Assembly

Nutri Ninja Blade Assembly

Chopping Blade Assembly

Nutri Ninja Blade Assembly

Single Serve

Blend Pulse

Single Serve

Blend

Blend Meat

Crush Pulse

Single Serve

Smoothies

Frappes

Milk Shakes

Onion Garlic Herbs

Bread dough

Pie dough

Pizza dough

Pretzel dough

Pâtés

Stewed fruits

Dips

Apple sauce

Spreads

Soups*

Baby food

Salad Dressings

Dips

Sauces*

Grated cheese Bread crumbs

Spices

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

CAUTION: Handle the blade assemblies with care, as the blades are very sharp.

NOTE: All jars,

dishwasher safe. Place the lids and blade assemblies on the top rack only. All jars, lids and plastic components of blade are BPA free.

1 Separate/remove all parts from each other.

2 Clean the motor base with a damp cloth and wipe dry.

3 Place the pitcher, Nutri Ninja

dishwasher. Place the lids and blade assemblies on the top rack.

4 Carefully hand wash the lids, pitcher, bowl,

cups and blade assemblies in warm, soapy water with a soft cloth.

Please call customer service if any servicing needs to be

performed on the appliance at 1-877-646-5288.

lids, discs and blade assemblies are

cup and bowl in the

Nutri Ninja

HOW TO STORE

1 Store the Ninja® Supra Kitchen System upright

with the pitcher on the motor base, Stacked Blade Assembly inside the pitcher and lid locked on the pitcher. Do not place anything on top. Store the Food Processor Bowl with the Chopping Blade Assembly inside and the lid locked on the bowl. Store the Nutri Ninja™ cup with the Nutri Ninja Blade Assembly attached to the cup and all other attachments along side the appliance or in a cabinet where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Ninja Supra Kitchen System features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance.

If the appliance is being overloaded, the motor will stop. Allow the appliance to cool for approximately 15 minut es. To reset the appliance, follow the resetting

procedure below:

Unplug the appliance from the electrical outlet.

Remove and empty the container and ensure that no

food is jamming the blade assembly.

Allow the appliance to cool for approximately 15

minutes.

Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Chopping

Mixing Bowl Dough Blade Assembly Dough

Ice Crushing

Pureeing

* When blending blending sauces and soups, make sure they’re cooled to room temperature ﬁrst - Ninja® containers are not

intended for hot blending.

11 12

Bowl

Nutri Ninja Cup

Pitcher

Nutri Ninja Cup

Pitcher

Nutri Ninja Cup

Chopping Blade Assembly

Nutri Ninja Blade Assembly

Stacked Blade Assembly

Nutri Ninja Blade Assembly

Stacked Blade Assembly

Nutri Ninja Blade Assembly

Single Serve

Pulse

Crush

Salsa

Vegetables

Nuts

Light cake mixes

Batters

Ice

Smoothies

Smooth soups

Milkshakes

www.ninjakitchen.com1-877-646-5288

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor Doesn’t Start or Blade Assembly Doesn’t Rotate.

Food is Unevenly Chopped.

Food is Chopped Too Fine or is Too Watery.

Food Collects On Lid or On the Sides of the Container.

You Cannot Achieve Snow From Solid Ice.

Motor Base Won’t Stick to Counter or Table Top.

Make sure the container is securely placed on motor base.

Make sure the lid is securely on container in the correct position (align arrows).

The appliance is turned “Off”. Press the power button (

Check that the plug is securely inserted into the electrical outlet.

Check the fuse or circuit breaker.

The unit has overheated or overcharged. Unplug and wait approximately 15 minutes before usingagain.

Check to make sure the unit is not overloaded.

Either you are chopping too much food at one time, or the pieces are not of even size and processing smaller amounts per batch.

The food has been over processed. Use pulse button for controlled processing.

The mixture is to thick. Add more liquid.

Do not use ice that has been sitting out or has started to melt. Use ice straight from the freezer.

Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces such as, wood, tile and non-polished ﬁnishes.

DO NOT attempt to use appliance when the motor base is stuck to a surface that is not secure, (cutting board, platter, plates, etc.).

) to turn “On”.

ONE (1) YEAR LIMITED WARRANTY

SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)

year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.

If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the speciﬁc obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or from province to province.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and

to attach tag to item before packing with your name, complete address and phone number with a note giving

purchase information, model number and what you believe is the problem with the item. We recommend you insure

the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package

“ATTENTION CUSTOMER SERVICE”.

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

13 14

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

www.ninjakitchen.com1-877-646-5288

PRODUCT REGISTRATION

SharkNinja Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7

1-877-646-5288 www.ninjakitchen.com

Ninja, Nutri Ninja and Total Crushing are registered trademarks of SharkNinja

Operating LLC.

Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the speciﬁcations contained herein are subject to change without notice.

For SharkNinja U.S. Patent information visit www.sharkninja.com/USPatents

Ninja BL780 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual