All rights reserved. No part of this publication may be reproduced, distributed, or
transmitted in any form or by any means, including photocopying, recording, or
other electronic or mechanical methods, without the prior written permission of
DUAL ELECTRONICS CORP.
DBTMA100 - InformationDBTMA100 - Safety Information
IMPORTANT SAFETY INFORMATION TO THE USER
IMPORTANT SAFETY PRECAUTIONS
clean sponge or a
This product must not be disposed of or dumped with your other
household waste. You are liable to dispose of all your electronic
collection point for recycling of such hazardous waste. Isolated
collection and proper recovery of your electronic and electrical waste
equipment at the time of disposal will allow us to help conserving
natural resources. Moreover, proper recycling of the electronic and
electrical waste equipment will ensure safety of human health and
environment. For more information about electronic and electrical
waste equipment disposal, recovery, and collection points, please
contact your local city center, household waste disposal service,
shop from where you purchased the equipment, or manufacturer of
the equipment.
23
QUICK START GUIDE
QUICK START GUIDE
DBTMA100 - InformationDBTMA100 - Getting Started
INFORMATION TO THE USER
FCC ID: 2AQL2-DBTMA100
FCC COMPLIANCE STATEMENT
KNOW YOUR DBTMA100
12
ßËÈ ×Ò
ÓßÈ
КСФЛУЫ
MAIN CONTROL PANEL
UNIT ON/OFF - LONG PRESS 3 seconds
1
TOP LED ON/OFF - SHORT PRESS when main unit is ON
VOLUME LEVEL - Rotatory Knob or from Device
2
3.5mm AUX INPUT
3
BLUETOOTH STATUS LED
4
BLUETOOTH PAIR BUTTON - LONG PRESS 2 seconds
BASS LEVEL - Turn Knob
5
4
3
5
ð¼Þ
ð¼Þ
МОЫЮФЫ
ÞßÍÍ
6
45
CAUTION!!
QUICK START GUIDE
TREBLE LEVEL - Turn Knob
6
QUICK START GUIDE
DBTMA100 - Wireless OperationDBTMA100 - Streaming Music
3
4
ð¼Þ
ßËÈ ×Ò
ÓßÈ
1
ÞßÍÍ
BLUETOOTH PAIRING
4
- Turn ON the unit - LONG PRESS
- LONG PRESS
4
1
КСФЛУЫ
- Turn on your Devices BLUETOOTH in your SETTINGS MENU
- Look and tap on DBTMA100 name
- Streaming is now ready
BLUETOOTH LED STATUS
3
BLUE LED BLINKING = BLUETOOTH NOT PAIRED
BLUE LED ON = BLUETOOTH PAIRED
To disconnect previously paired BT Device - LONG PRESS
4 for 3 seconds
To clear all previously paired BT Devices - LONG PRESS
4 for 10 seconds
ð¼Þ
МОЫЮФЫ
1
1
4
5
6
КСФЛУЫ
ßËÈ ×Ò
ÓßÈ
45
ð¼Þ
ÞßÍÍ
6
ð¼Þ
МОЫЮФЫ
VOL UP/DOWN - Rotatory Knob or from Device
PLAY/PAUSE - SHORT PRESS
BASS LEVEL - Turn Knob -6dB | 0 |+6dB
TREBLE LEVEL - Turn Knob -6dB | 0 |+6dB
DBTMA100 will automatically power
OFF
VOLUME level will automatically sync with most iOS
Devices. Supported Android devices may require
additional setup in the Bluetooth settings menu, consult
your phone manual for additional information.
67
QUICK START GUIDE
QUICK START GUIDE
DBTMA100-WiringDBTMA100-Placement
INSTALLATION
Placement
ßËÈ×Ò
ÓßÈ
ÊÑÔËÓÛ
ð¼Þð¼Þ
ÞßÍÍ
Your DBTMA100
ÌÎÛÞÔÛ
HardWiring
ФЫЪМОЧЩШМ
ФЫЪМ ОЧЩШМ
РСЙЫО
Ô×ÒÛ ÑËÌ
пл¢омКЬЭ
NOTwire LEFT&RIGHT
NOT
ÔÛÚÌ
ОЧЩШМ
Expandingthe
REARRCAOUTPUTS
system
ФЫЪМ ОЧЩШМ
ÔÛÚÌ
ОЧЩШМ
РСЙЫО
Ô×ÒÛ ÑËÌ
пл¢омКЬЭ
Experimentfor BetterSound
89
QUICK START GUIDE
QUICK START GUIDE
DBTMA100
DBTMA100 - Trouble Shooting
BLUETOOTH
AMPLIFIER
GENERAL
SPECIFICATIONS
oooo
oooo
TROUBLE SHOOTING
TROUBLECAUSESOLUTION
Turn wall switch ON /
check breakers
Plug AC/DC adapter into
wall
Turn the DBTMA100
volume level up
Check your Devices
playing / volume status
Raise the Device volume
to a higher level
Move the Device closer
to the audio system or
remove any obstacle
between the Device
Unit will not turn on
No sound is heard
The audio quality is
poor
The audio quality is
poor after connection
with a Bluetooth
enabled device