WARNING ...................................................................................................................................................................................... 4
Quick Start Guide ........................................................................................................................................................................ 7
Product Overview ........................................................................................................................................................................ 7
System Requirements ................................................................................................................................................................ 7
Package Contents ......................................................................................................................................................................... 7
Factory Default Settings ........................................................................................................................................................... 7
Cabling ............................................................................................................................................................................................... 8
Browser Configuration .............................................................................................................................................................. 8
PPPoE/PPPoA ............................................................................................................................................................................ 9
DEVICE INFO .............................................................................................................................................................................. 10
Summary .................................................................................................................................................................................... 10
Wan .............................................................................................................................................................................................. 11
Statistics...................................................................................................................................................................................... 11
Route ............................................................................................................................................................................................ 14
Arp ................................................................................................................................................................................................. 14
Dhcp .............................................................................................................................................................................................. 15
QUICK SETUP ............................................................................................................................................................................ 16
ADVANCED SETUP ................................................................................................................................................................ 16
LAyer2 Interface ..................................................................................................................................................................... 17
WAN Service ........................................................................................................................................................................... 19
WAN Service(PPPoE) ......................................................................................................................................................... 19
WAN Service(PPPoA) ......................................................................................................................................................... 23
WAN Service(IPoA) ............................................................................................................................................................. 26
3G WAN Service .................................................................................................................................................................... 29
LAN ............................................................................................................................................................................................... 31
LAN (IPv6 Auto-configuration) ....................................................................................................................................... 33
NAT(Virtual Servers) ........................................................................................................................................................... 34
NAT(Port Triggering).......................................................................................................................................................... 35
NAT(DMZ Host) .................................................................................................................................................................... 36
Security(Firewall) ................................................................................................................................................................... 37
Security(MAC Filtering Setup) ........................................................................................................................................ 37
Parental Control(Time restriction) .............................................................................................................................. 40
1
Parental Control(URL Filter) ........................................................................................................................................... 41
Quality of Service ................................................................................................................................................................... 42
Routing ........................................................................................................................................................................................ 44
DNS(DNS Server) ................................................................................................................................................................. 46
DNS(Dynamic DNS) ............................................................................................................................................................. 46
DSL ................................................................................................................................................................................................ 47
UpnP ............................................................................................................................................................................................. 47
DNS Proxy ................................................................................................................................................................................. 48
Print Server ............................................................................................................................................................................... 48
Packet Acceleration .............................................................................................................................................................. 48
Storage Service ....................................................................................................................................................................... 48
Interface Grouping ................................................................................................................................................................ 49
IP Tunnel .................................................................................................................................................................................... 51
Certificate .................................................................................................................................................................................. 52
Power Management .............................................................................................................................................................. 56
WIRELESS ..................................................................................................................................................................................... 57
Basic .............................................................................................................................................................................................. 58
Security ....................................................................................................................................................................................... 60
Mac Filter ................................................................................................................................................................................... 66
Wireless Bridge ....................................................................................................................................................................... 67
Advanced Settings ................................................................................................................................................................. 68
Station Info ................................................................................................................................................................................ 70
DIAGNOSTICS ........................................................................................................................................................................... 71
MANAGEMENT ......................................................................................................................................................................... 72
Settings (Backup) ................................................................................................................................................................... 72
Settings (Update) ................................................................................................................................................................... 72
Settings (Restore Default) ................................................................................................................................................. 72
System Log ................................................................................................................................................................................ 73
SNMP Agent ............................................................................................................................................................................. 74
Internet Time ........................................................................................................................................................................... 74
Access Control (Password) ............................................................................................................................................... 74
Access Control (Services) .................................................................................................................................................. 75
Update Software ..................................................................................................................................................................... 75
Reboot ......................................................................................................................................................................................... 76
2
APPENDIX A: Connect to a network using Windows client ............................................................................... 77
Windows 8 ................................................................................................................................................................................. 77
Windows 7 ................................................................................................................................................................................. 77
Windows VISTA ..................................................................................................................................................................... 77
Windows XP ............................................................................................................................................................................. 77
APPENDIX B: IP Address in DHCP Client Mode ...................................................................................................... 78
Windows 7/8 ............................................................................................................................................................................. 78
Windows Vista ......................................................................................................................................................................... 78
Windows XP ............................................................................................................................................................................. 78
Windows 2000.......................................................................................................................................................................... 78
APPENDIX C: TECHNICAL SPECIFICATIONS ...................................................................................................... 79
3
WARNING
Copyright Statement
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher.
Windows™ 98SE/2000/ME/XP/VISTA/7/8 are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright
reserved.
The Nilox logo is a registered trademark. All other names mentioned may be trademarks or registered trademarks of their
respective owners. Subject to change without notice. No liability for technical errors and/or omissions.
Safety Precautions
Please read the following instructions carefully in order to avoid any risk or damage to the device caused by fire or electric
power failure:
Only qualified personnel should carry out any technical work on the device
Use the type of power marked on the volume label
Use the power adapter included in the device package
Pay attention to the power load of the outlet or extension lines. An overloaded power outlet or damaged lines and plugs
may cause electric shock or fire accident. Check the power cables regularly. In case of damage, replace the component
at once
Proper space left for heat dissipation is necessary to avoid damage caused by overheating to the device. The long and
thin holes on the device are designed for heat dissipation to ensure that the device works normally. Do not cover these
heat dissipation holes
Do not put this device close to a heat source or in a place with high temperatures. Do not expose it to direct sunlight.
Keep this device in a dry place. Do not spill any fluid on this device
Do not connect this device to any PCs or electronic products, unless our customer engineer or your broadband
provider gives you exact instructions on how to operate, as any wrong connection may cause power damage or fire risk.
Do not place this device on an unstable surface or support
When cleaning, avoid using cleaning sprays or any product containing alcohol or other flammable liquids
Avoid overheating. This may reduce the life of the device
Protect your device from humidity, direct sunlight as well as high and extremely low temperatures
Do no place any liquids on or close to the unit
If the device is brought from a cold environment into a warmer installation site, condensation may occur. Wait until the
temperature of the device has normalized. The unit should be completely dry before you connect it to AC main
Please use the supplied AC/DC Adapter included in the package. If you connect it to other devices, this product or
power supply unit may be damaged
We recommend you to place the device on a non-slip surface
Please note that the rubber/plastic feet on the devices may damage the surface
Check the cable regularly. Damaged cables must be replaced immediately
Ensure that no objects enter the connection sockets
Do NOT upgrade firmware over a wireless connection. Failure of the device may result. Use only hard-wired network
connections
Restoring a saved configuration file generated with another firmware version may render your Router unstable and some
functions may not work properly. After upgrading, please reset the router to factory default settings, then manually reenter your settings
Unplug ADSL Line and connect it to the Router using only 1 Ethernet port
Please pay attention. Any electrical shutdown during this procedure may cause malfunctioning
When uploading a software to the Router, it is important not to interrupt the Web browser by closing the window or
loading a new page. If the browser is interrupted, it may corrupt the software
4
Environmental information
This product may contain substances that can be hazardous to the environment or to human health if it is not disposed of
properly. We therefore provide you with the following information to prevent releases of these substances and to improve
the use of natural resources. Electrical and electronic equipments should never be disposed of in the usual municipal waste
but must be separately collected for their proper treatment. The crossed-out bin symbol, placed on the product and in this
page, remind you of the need to dispose of properly the product at the end of its life. In this way it is possible to prevent
that a not specific treatment of the substances contained in these products, or their improper use, or improper use of their
parts may be hazardous to the environment or to human health. Furthermore this helps to recover, recycle and reuse many
of the materials used in these products. For this purpose the electrical and electronic equipment producers and distributors
set up proper collection and treatment systems for these products. At the end of life your product contact your distributor
to have information on the collection arrangements. When buying this new product your distributor will also inform you of
the possibility to return free of charge another end of life equipment as long as it is of equivalent type and has fulfilled the
same functions as the supplied equipment. A disposal of the product different from what described above will be liable to
the penalties prescribed by the national provisions in the country where the product is disposed of. We also recommend
you to adopt more measures for environment protection: recycling of the internal and external packaging of the product
and disposing properly used batteries (if contained in the product). With your help it is possible to reduce the amount of
natural resources used to produce electrical and electronic equipments, to minimize the use of landfills for the disposal of
the products and to improve the quality of life by preventing that potentially hazardous substances are released in the
environment.
PS.: The above mentioned information are reported herewith in compliance with Directive 2002/96/CE, which requires a
separate collection system and specific treatment and disposal procedures for the waste of electric and electronic
equipments (WEEE). For further and more detailed information, we invite you to visit our website at www.nilox.com
WARRANTY INFORMATIONS
One year, if it is invoiced to an industry or to a professional worker (subjected to VAT number).
Two years, if it is financially described as a sale to a private subject. This Warranty is related when a LACK OF
CONFORMITY TAKES PLACE and that is related to the product features.
Support for the product and warranty More information are available on www.nilox.com area SUPPORT AND
DOWNLOAD.
Warranty limits
This warranty cannot be applied in the following situations:
lack of purchase proof (bill or a receipt)
Intervention, forcing and damage to hardware and display.
more default caused by: misuse, unauthorized changes to hardware/software;
The above Information refers to the Directive 1999/44/CE.
Declaration of Conformity
Product complies with 1999/5/CE-2011/65/CE Directive. The declaration in full version and the technical documentations
are available at our headquarters. Keep the packaging for future references.
CE Logo ( ), in some devices, isn't fully compliant with minimum dimensions requirement to European Directive
due to limited sticker area.
5
WEEE BIN Logo ( ),in some devices, isn’t fully compliant with minimum dimensions requirement to European
Directive due to limited sticker area.
Nilox suggests to visit the web site www.nilox.com in order to retrieve update manual, tech details and driver.
Before starting, take a few minutes to read this manual. Read all the instructions and save this manual for later reference.
6
QUICK START GUIDE
Thank you for purchasing Nilox Wireless N ADSL2+ Router that provides the easiest way to wireless networking. This
document describes how to install your Nilox Router. Please keep this User Guide for future reference.
PRODUCT OVERVIEW
ADSL2+ Built-In modem for high-speed Internet Access (up to 24Mbps)
You can connect a 3G/HSDPA USB modem (into USB port), enabling you to use a 3G Internet connection. The auto fail-
over feature ensures maximum connectivity and minimum interruption by quickly and smoothly connecting to a 3G
network in the event that your ADSL line fails
IEEE 802.11n compliant, to support up to 150/300Mbps speed (backward compatibility with 802.11b/g specifications)
USB 2.0 Print Server (Compatible with a wide range of USB (LPR) printers)
4-port Fast Ethernet switch
Strong network security with WEP and WPA/™WPA2™ support
The Quality of Service (QoS) prioritizes traffic to enable a group users/applications to enjoy the benefit of a smooth
network connection without concern of traffic congestion
ADSL Filter included
Easy to install and configure
SYSTEM REQUIREMENTS
Before installing the Adapter, your PC should meet the following:
ADSL Internet service
Ethernet Adapter with TCP/IP Protocol Installed
Internet Explorer v6.0 or later, Mozilla Firefox v1.0 or later, Safari 2.0 or later, Google Chrome 1.0 or later
PACKAGE CONTENTS
Open Nilox Wireless N ADSL2+ Router box and carefully unpack it. The box should contain the following items:
Wireless N ADSL2+ Router
AC/DC Adapter (12V@0.8A)
RJ11 and RJ45 cables
ADSL Filter (RJ11)
One MultiLanguage Quick Start Guide (English, Spanish and Italian)
CD-Rom with Manual (English and Italian)
If any item is found missing or damaged, please contact your local reseller for replacement.
FACTORY DEFAULT SETTINGS
Before you configure this Wireless N ADSL2+ Router, you need to know the following default settings:
Username: admin
Password: nilox
IP address: 192.168.1.1
Subnet Mask: 255.255.255.0
DHCP Server: enable (from 192.168.1.100 to 192.168.1.199)
WAN=PPPoA, VPI=8, VCI=35, VC-Mux
SSID(16NXRW14CQ001): DAS-1410, Encryption: WPA-PSK (AES), WPA Pre-shared Key: Nilox1410
SSID(16NXRW14300011): DAS-2420, Encryption: WPA-PSK (AES), WPA Pre-shared Key: Nilox2420
To reset password or to restore factory settings, press the reset button (5 seconds).This procedure is usually used when
you can’t login to the router, e.g. forgot the password
7
LED
MEANING
POWER
Green light Lit up when power is plugged in and the system is ready. Red light Lit up during boot
ADSL
Green light Lit up when the device is successfully connected to an ADSL DSLAM
INTERNET
Light off when WAN port fails to get IP address
Green light Lit up when WAN port gets IP address successfully. Blinking light when data transmit/received
Light off when the device is in bridge mode or when WAN connection is absent
LAN
Green light lit up when connected to Ethernet device
Blinking light when data transmit/received
USB
OFF
WIRELESS
Green light Lit up when the wireless module is started
WPS
OFF
CABLING
Firstly connect the product to the ADSL line through the RJ11 cable included in the equipment (in the ADSL yellow
port)
Connect the PCs of your Lan or another Switch (up to 4) to the RJ45 ports.
Finally connect the AC/DC Adapter to the Wireless ADSL2+ Router and then to the socket
Once you've checked all the connections, switch on the Wireless ADSL2+ Router: the product will carry on an auto-
test immediately (60 seconds)
After this, the LEDs status will be the following:
The Led ADSL, if suitably connected, will be flashing at first and then it remains on.
ATTENTION! The ADSL Led is OFF or blink continuously.
One of the most common causes of problem is bad cabling or ADSL line(s). Make sure that all connected devices are
turned on. On the front panel of your router you can see a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are
lit up. If they are not, verify if you are using the proper cables. Make sure that all devices (e.g. telephones, fax machines,
analogue modems) connected to the same telephone line as your router have a line filter connected between them and the
wall outlet (unless you are using a Central Splitter or Central Filter installed by a qualified and licensed electrician), and that
all line filters are installed in a right way. If the line filter is not installed and connected properly, this may cause problems to
your ADSL connection or may result in frequent disconnections.
If the ADSL Led flashes periodically you must force modulation. Click on Advanced Setup, then DSL. Please choose
ADSL modulation, then click on Apply/Save.
BROWSER CONFIGURATION
Open the web browser, enter the local port IP address of this Wireless N ADSL2+ Router, by default this is at
192.168.1.1, and click Go to get the login page.
The default username is admin, password is nilox and click “OK” to continue. With the following steps you can make
Wireless Router ADSL2+ operate in short time using PCs in DHCP mode. Refer to the manual in the Installation CD if
you need personalized configuration. Click on Quick Setup.
8
PPPOE/PPPOA
PPPoA/PPPoE is an ADSL connection known as dial-up DSL. PPPoA/PPPoE has been created to integrate large band
services paying particular attention to an easy configuration. The user can obtain a high access speed and he can also share
the same account with the ISP. Let’s see how to configure correctly this kind of ADSL configuration.
In case of PPPoE (left picture) choose VPI=8, VCI=35 and Encapsulation Mode=LLC/SNAP Bridging and
Protocol=PPPoE
In case of PPPoA (right picture) choose VPI=8, VCI=35 and Encapsulation Mode=VC/MUX and
Protocol=PPPoA
Insert Username and Password (check with ISP), now you will be able to change the SSID. Click on Apply/Save, then
Next.
The Setup Wireless wizard is now completed. After some minutes the Internet LED will be lit in green.
In order to verify the WAN Status, please click Device Info->WAN.
Pay attention to the WAN-ADSL connection. If you have any doubt turn to qualified personnel or contact Nilox technical
assistance. Nilox will not be considered responsible in case of wrong or bad configuration.
9
DEVICE INFO
This chapter describes how to use Web-based management of the DSL router, which allows you to configure and control
all DSL router features and system parameters in an user-friendly GUI.
Choose Device Info, and the submenus of Device Info are shown as below:
SUMMARY
Choose Device Info > Summary, and the following page appears.
10
This page displays the device information such as the board ID, software version, and the information of your WAN
connection such as the upstream rate and the LAN address.
WAN
Choose Device Info > WAN and the following page appears.
This page displays the information of the WAN interface, such as the connection status, and the IP address.
STATISTICS
Choose Device Info > STATISTICS > LAN and the following page appears.
In this page, you can view the statistical information about the received and transmitted data packets of the Ethernet and
wireless interfaces.
Click Reset Statistics to restore the values to zero and recount them.
Choose Device Info > STATISTICS > WAN Service and the following page appears.
In this page, you can view the statistical information about the received and transmitted data packets of the WAN interface.
Click Reset Statistics to restore the values to zero and recount them.
11
Choose Device Info > STATISTICS > xTM and the following page appears.
In this page, you can view the statistical information about the received and transmitted data packets at the xTM interfaces.
Click the Reset button to restore the values to zero and recount them.
12
Choose Device Info > STATISTICS > xDSL and the following page appears.
In this page, you can view the statistical information about the received and transmitted data packets of the xDSL interfaces.
Click xDSL BER Test to test the xDSL Bit Error Rate.
Click Reset Statistics to restore the values to zero and recount them.
13
NOTE!: Click xDSL BER Test to perform a bit error rate (BER) test on the DSL line. The Tested Time (sec) can be 1, 5,
10, 20, 60, 120, 180, 240, 300, or 360. Select a time in the drop-down list and click Start.
If the BER reaches e-5, you cannot access Internet.
ROUTE
Choose Device Info > ROUTE and the following page appears.
In this page, you can view the route table information.
ARP
Choose Device Info > ARP and the following page appears.
In this page, you can view the MAC address and IP address information of the device connected to the router.
14
DHCP
Choose Device Info > DHCP and the following page appears.
In this page, you can view the host name, the IP address assigned by the DHCP server, the MAC address corresponding to
the IP address, and the DHCP lease time.
15
QUICK SETUP
Check previous chapter.
ADVANCED SETUP
Choose Advanced Setup and the submenus of Advanced Setup are shown as below:
16
LAYER2 INTERFACE
Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to configure DSL
ATM Interfaces.
Click Add to add ATM Interface and the following page appears.
In this page, you can enter this PVC (VPI and VCI) value, and select DSL link type (EoA is for PPPoE, IPoE, and Bridge.),
encapsulation mode, service category.
VPI (Virtual Path Identifier): The virtual path between two points in an ATM network, and its valid value is from 0
to 255.
VCI (Virtual Channel Identifier): The virtual channel between two points in an ATM network, ranging from 32 to
65535 (1 to 31 are reserved for known protocols).
DSL Link Type: EoA (it is for PPPoE, IPoE, and Bridge), PPPoA, or IPoA
Encapsulation Mode: LLC/SNAP-BRIDGING, or VC/MUX
Service Category: UBR Without PCR, UBR With PCR, CBR, Non Realtime VBR, Realtime VBR.
Select Scheduler for Queues of Equal Precedence as the Default Queue: Weighted Round Robin or Weighted
Fair Queuing.
17
Click Apply/Save to save the configuration, and return the following page:
If you want to remove this Interface, please select the Remove check box and click Remove.
18
WAN SERVICE
Choose Advanced Setup > WAN Service, and the following page appears.
In this page, you are allowed to add, remove, or edit a WAN service.
WAN SERVICE(PPPOE)
This section describes the steps for adding the PPPoE WAN service.
Step0 Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to
configure DSL ATM Interfaces. Click Add to add ATM Interface and the following page appears. DSL Link Type: EoA
(it is for PPPoE, IPoE, and Bridge) and select the encapsulation mode to be LLC/SNAP-Bridging (according
to the uplink equipment). Click Apply/Save to save the configuration, and return the following page.
Step1 Choose Advanced Setup > WAN Service, and the following page appears. Click Add. In the Wide Area
Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper
ATM interface for this WAN service).
19
Step 2 In this page, you can select a ATM Interface for the WAN service. After selecting the ATM interface, click Next
to display the following page.
Step 3 In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following
page.
20
Step4 In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method.
PPP Username: The correct user name provided by your ISP.
PPP Password: The correct password provided by your ISP.
PPPoE Service Name: If your ISP provides it to you, please enter it. If not, do not enter any information.
Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO.
Enable Fullcone NAT:. NAT is one where all requests from the same internal IP address and port are mapped to the
same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending
a packet to the mapped external address.
Dial on demand (with idle timeout timer): If this function is enabled, you need to enter the idle timeout time. Within
the preset minutes, if the modem does not detect the flow of the user continuously, the modem automatically stops
the PPPoE connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If
this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connnection does not stop,
unless the modem is powered off and DSLAM or uplink equipment is abnormal.
PPP IP extension: If you want to configure DMZ Host, you should enable it first.
Use Static IPv4 Address: If this function is disabled, the modem obtains an IP address assigned by an uplink equipment
such as BAS, through PPPoE dial-up. If this function is enabled, the modem uses this IP address as the WAN IP
address.
Enable PPP Debug Mode: Enable or disable this function.
Bridge PPPoE Frames Between WAN and Local Ports: Enable or disable this function.
Enable IGMP Multicast Proxy: If you want PPPoE mode to support IPTV, enable it.
21
Step5 After setting the parameters, click Next to display the following page.
Step6 In this page, select a preferred WAN interface as the system default gateway and then click Next to display the
following page.
Step7 In this page, you can obtain the DNS server addresses from the selected WAN interface. Click Next, and the
following page appears.
Step8 In this page, it displays the information about the PPPoE settngs. Click Apply/Save to save and apply the settings.
22
WAN SERVICE(PPPOA)
This section describes the steps for adding the PPPoA WAN service.
Step0 Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to
configure DSL ATM Interfaces. Click Add to add ATM Interface and the following page appears. DSL Link Type:
PPPoA and select the encapsulation mode to be VC/MUX (according to the uplink equipment). Click Apply/Save
to save the configuration, and return the following page.
Step1 Choose Advanced Setup > WAN Service, and the following page appears. Click Add. In the Wide Area
Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper
ATM interface for this WAN service).
Step 2 In this page, you can select an ATM Interface for the WAN service. After selecting the ATM interface, click
Next to display the following page.
Step 3 In this page, Click Next.
23
Step4 In this page, you can modify the PPP username, PPP password, PPPoA service name and authentication method.
PPP Username: The correct user name provided by your ISP.
PPP Password: The correct password provided by your ISP.
Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO.
Enable Fullcone NAT:. NAT is one where all requests from the same internal IP address and port are mapped to the
same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending
a packet to the mapped external address.
Dial on demand (with idle timeout timer): If this function is enabled, you need to enter the idle timeout time. Within
the preset minutes, if the modem does not detect the flow of the user continuously, the modem automatically stops
the PPPoE connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If
this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connnection does not stop,
unless the modem is powered off and DSLAM or uplink equipment is abnormal.
PPP IP extension: If you want to configure DMZ Host, you should enable it first.
Use Static IPv4 Address: If this function is disabled, the modem obtains an IP address assigned by an uplink equipment
such as BAS, through PPPoE dial-up. If this function is enabled, the modem uses this IP address as the WAN IP
address.
Enable PPP Debug Mode: Enable or disable this function.
Bridge PPPoE Frames Between WAN and Local Ports: Enable or disable this function.
Enable IGMP Multicast Proxy: If you want PPPoE mode to support IPTV, enable it.
24
Loading...