NILFISK Cyclone 4006 User Manual

Cyclone 4006

Ultra High Pressure Hard Surface Cleaner

Smart cleaning.

A Nilfisk-Advance Brand

Cantilevered cab design provides

a direct line of sight with the

cleaning path for the operator

360º LED lightbar provides

safe visibility and compliance

with airport regulations

Fiberglass and composite

siding provides durability

with a sound reducing,

quality material

The cleaning head’s unique design

provides instantaneous recovery

without the use of a vacuum

24 in / 61 cm paint removal head.
No runoff and no surface damage.

Safe and easy access to the cab.

Also, equipped with a “jump seat”

for training purposes

40 inch (102 cm) rubber removal head. Unmatched
cleaning with instantaneous recovery.

Easy access to the

engine compartment

and critical systems

A Nilfisk-Advance Brand

Complete water and debris recovery make the Advance
Cyclone 4006 a truly environmentally friendly solution.

Cyclone 4006

Ideal applications include:

Ultra High Pressure Hard Surface Cleaner

Innovative Design Deep Cleans with Environmental
Approach that Recovers Water and Debris

The Advance Cyclone 4006 deep cleans outdoor surfaces more effectively and in less
time than other methods. A patented cleaning and recovery head aggressively cleans
and removes buildup with no damage to the surface. Water and debris is recovered
and separated, and nothing is left behind but a clean surface that dries quickly.

Over time, rubber buildup on airport runways can create a safety hazard. Advance’s
Cyclone machines remove rubber marks from both grooved and smooth runways
without damaging the integrity of the surface, whether it’s concrete or asphalt.

Painted lines are critical safety elements at airports and on highways and roadways.
Advance’s Cyclone machines remove painted lines without damaging the surface,
leaving it clean, dry and ready for repainting. All of the water used for cleaning as well
as the painted line debris are recovered, ensuring an environmentally friendly solution to
painted line removal.

Cutting-edge technology cleans hard surfaces better than other

available methods

Water and debris recovery and separation provides an

environmentally-friendly cleaning solution

Cleaning without the use of a vacuum system reduces noise and

simplifies operation and maintenance

• Runway Rubber Removal

• Paint Line Removal

• Pavement Markings and

Coatings Removal

40 in /102 cm rubber removal head uses less than
6 gpm / 22.71 - Ipm > 0 discharge 0 runoff.

Category 4 Cyclone storm within the cleaning heads
for unmatched cleaning.

Single-engine configuration decreases maintenance requirements

and sound levels

Easy-to-use instruments and controls give the operator full command

of both the machine and cleaning

work from the comfort of

the high-visibility cab

Effortlessly

change from

rubber removal

to paint

removal in

minutes

FEATURES AND BENEFITS

Technical Specifications

Model Cyclone 4006
Cleaning Path (Rubber) 33 in (83.82 cm) cast aluminum housing
Cleaning Path (Paint) Variable from 8 in (20.32 cm) to 14 in (35.56 cm) cast iron or aluminum housing
Water Pump Positive Displacement Triplex Plunger, with full pressurized lubrication, water cooled

5.7 gallons per minute @ 40,000 psi

22.6 L/min @ 2,758 bar
Cleaning Head Permanently mounted, hydraulically controlled, multi pivot point maneuverability
Cast aluminum housing, hydraulically driven rotation, fiberglass recovery tank
Belt-driven return pump. Stainless steel ultra high pressure components
1,200 RPM create instantaneous recovery
Filtration System
Reclaim Tank (Rubber or Paint) Sand blasted and powder coated stainless steel. Separates water from material
2,100 gal (7,949 L) total capacity. Powered dump with powered door for easy maintenance
Water Tank 1,600 gal (6,000 L) corrosion resistant fiberglass
Cleaning Attachments Gas powered, remote paint removal head up to 300 ft (91 m) distance
Steering Hydraulic power steering
Drive Joystick controlled hydrostatic drive
Speeds 2 operating speeds and 1 transport speed variable up to 18 mph (28.9 km/h)
Controls Total single operator controls from inside cab
Multifunctional steering column provides operation controls
Control panel for joystick functions and full lighting controls
Brakes Air brakes, front and rear automatically adjusted 4 wheel drum brakes
Fuel Tank 100 gal (379 L) total fuel capacity
Chassis Frame Construction
and a 20,000 lb front axle
Power Plant Engine 9.0 L Power Tech Interim Tier 4 / Stage III B, 375 hp turbocharged liquid cooled diesel engine
Weight 28,000 lb (12,700 kg) – dry
Dimensions L = 30 ft (9.14 m) x W = 8 ft (2.44 m) x H = 10 ft (3.05 m)

Specifications are subject to change without notice.

Inlet water filtered to 0.35 micron over 260 ft2 of filtration

10 in (25.4 cm) x 3 in (7.62 cm) x ¼ in (0.635 cm) wall cold rolled steel tubing frame on a 23,000 lb rear axle

Standard features:

• Designed Specifically for Airport

Applications

• Exceptional Maneuverability

• Speed Infinitely Adjustable from 0 to

18 mph (29 km/h)

• Completely Self Contained

One Person Operation

• Climate Controlled Cab

• Cantilevered Cab Design Provides

Operator Direct Line-of-Sight View
of Cleaning Path

• Remote Viewing Camera Gives

Operator 360 Degree Visibility with
No Blind Spots

• 2 Permanently Mounted Cyclone

Cleaning Heads Switch from Rubber
Removal to Paint Line Removal
in Minutes

Ask about our leasing options.

©2011 Nilfisk-Advance, Inc. L3176A 11-10-11

• Only 1,600 Gallons/6,056 Liters of

Water Required

• Onboard Recovery and Waste

Separation

• Automatic Simultaneous Separation of

Waste from Cleaning Water

• Recovery System Not Dependant on

Surface Seal Eliminating Leakage
or Runoff

• External Vacuum Source Not Required

• Surfaces Left Clean and Usable

in Minutes

14600 21st Avenue North
Plymouth, MN 55447-3408
www.advance-cyclone.com

Phone [phone]

Fax [phone]

A Nilfisk-Advance Brand

www.advance-cyclone.com