Nikon 16006, 7541, 7540, 16007 User manual

BINOCULARS / JUMELLES / BINOCULARES / BINÓCULO

8x42 / 10x42

Instruction manual /Manual de instrucciones / Manuel d’utilisation / Manual de instruções

En Es Fr Pt

	5
	6
1	7
2	2

8

B

3

CD

9

4

English...............................................	p. 4-6
Español..............................................	p. 7-9
Français........................................	p. 10-12
Português brasileiro...................	p. 13-15

2

3

En

Es

Fr

Pt

Nomenclature

		Please refer to the numbered images on page 2.
	1Eyecups		ITEMS SUPPLIED
	2Neck strap eyelet
	3Focusing ring		Binoculars.............................		x1
	4Objective lenses		Eyepiece cap........................		x1
English	5Interpupillary distance		Objective lens caps...........		x2
	6Diopter ring		Soft case................................		x1
	7Diopter index		Neckstrap		x1
	80 (zero) diopter position

9Central shaft

*Waterproof models:

All models shown are waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a maximum depth of 1 meter for up to 10 minutes.

These products offer the following advantages:

•Can be used in conditions of high humidity, dust and rain without risk of damage.

•Nitrogen-filled design makes them resistant to condensation and mold.

Observe the following precautions when using these products:

•As the unit does not have a perfectly sealed structure, it should not be operated nor held in running water.

•Any moisture should be wiped off before adjusting movable parts

(focusing knob, eyepiece, etc.) of these products to prevent damage and for safety reasons.

To keep your binoculars in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.

Eyecups

				En
		For directions in which to turn the eyecups, please refer to the image on page 2.		Es
	For eyeglass wearers, use fully retracted. To accurately adjust your view, you can also use two click			Fr
				Pt
		stops before reaching the fully retracted position.
	For non-eyeglass wearers, use fully extended. To accurately adjust your eye position, you can also use
		two click stops before reaching the fully extended position.

Neckstrap and caps during observation

Please refer to images A, B, C and D on page 2.

Attach the neckstrap as illustrated (A), paying special attention to avoid twisting the strap.

Attach the objective lens caps (B), making sure the cap part hinges open downward from the binocular tube when folded open. The slit should be visible at the left side of each binocular tube, viewed from the eyepiece side, to confirm correct positioning (correctly attached when supplied).

Eyepiece cap during observation

There are two ways you can position the eyepiece cap as you observe your subject.

1.Remove the eyepiece cap from the eyepieces and allow it to hang from the neckstrap.

2.Remove the eyepiece cap from the eyepieces, then detach the right strap from the cap and allow it to hang from the left neckstrap (C).

Objective lens caps during observation

The binoculars are used with the objective lens caps folded open (C).

Attaching and detaching the eyepiece cap from the neckstrap

Attach/detach caps from the neckstrap as shown in image (D) in the following order:

Attaching: c → b → a

Detaching: a → b → c

4

5