Ver.1.0.20100928
MITO
MITO User Manual
2
Contents
1. For your Safety ............................ 5
2. Mobile Phone Profile .................. 8
3. Preparation before Use ............. 10
Install SIM Card ...................................... 10
Install Memory card ............................... 12
Install Battery ......................................... 13
Charge Battery........................................ 14
Notices on using the battery .................. 15
PIN code ................................................. 17
4. General Instructions .................. 18
Dial key ................................................... 18
Switch-on/off key /End key .................... 18
Standard keypad..................................... 19
Keypad lock ............................................ 19
Icons in Standby State ............................ 20
Services .................................................. 20
Callers’ group ......................................... 20
5. Basic operation ......................... 21
Switch on ................................................ 21
MITO User Manual
3
Switch off ............................................... 22
Dial a Call ................................................ 22
Adjust Receiver Volume ......................... 23
Answer a Call .......................................... 23
Send DTMF Signal ................................... 24
Dial Hold ................................................. 24
Fast Read SMS ........................................ 25
Missed Calls ............................................ 25
Connect to Voice mail ............................ 25
6. Use of Menu Functions ................ 26
Multimedia ............................................. 26
Phonebook ............................................. 32
Call center .............................................. 35
Services .................................................. 41
Messages ................................................ 47
Facebook ................................................ 58
Twitter .................................................... 58
Organizer ................................................ 58
Fun & Games .......................................... 61
File Manager ........................................... 61
User Profiles ........................................... 66
Settings ................................................... 68
MITO User Manual
4
7. Coffer Function ............................ 73
8. Maintenance & Safety ............... 77
Charger and Adapter Safety ................... 77
Battery Information and Care ................. 77
General Notice ....................................... 78
Troubleshooting ..................................... 79
9. Abbreviations............................... 82
MITO User Manual
5
1. For your Safety
For your safety and proper use of the
mobile phone, please read the following
guidelines carefully: Do not switch the mobile
phone on when close to chemical factory, gas
station or other explosive objects.
During driving, please use headset for safety
purpose; unless otherwise in emergency,
always stop the car on roadside to have a call
conversation.
Because the use of the mobile phone can
cause interference in the aircraft, never use
the mobile phone in aircraft. The use of the
mobile phone is dangerous and illegal; do
switch off the mobile phone before boarding.
Pay special attention to the use of the mobile
phone near heart pacemaker, deaf-aid and
some other medical equipment, because the
mobile phone can cause interference with
them.
None-original factory’s accessories and parts
will lose guarantee.
Do not dismantle the mobile phone without
permission. In case of failure, please contract
the supplier as soon as possible.
MITO User Manual
6
Do not plug the charger into the mobile
phone and charge without battery. Always
power off the mobile phone when taking out
the battery; otherwise the memory of the
phone may be damaged.
When charging the mobile phone, always
keep it in the place with good ventilation,
heat sink and away from flammable and
explosive objects.
In order to avoid demagnetization, always
keep the mobile phone away from magnetic
objects such as CD, credit card etc.
Ensure the mobile phone not to contact any
liquid; once such case occurs, remove the
battery and contact the supplier
immediately.
Do not use the mobile phone in the
environment at too high or too low
temperature, never expose the mobile
phone under strong sunshine or too wet
environment. The suitable temperature for
the phone and accessories is 0℃-40℃. The
height to use the phone shall be less than
2,000m.
Do not use liquid or wet cloth with strong
cleanser to clean the mobile phone.
MITO User Manual
7
This mobile phone has shooting, videoing
and audio recording functions, which shall be
used as per the related laws and regulations.
Always keep the mobile phone out of
children’s reach. Do not throw or vibrate the
mobile phone because violent treatment to
the mobile phone may damage the inner
circuits and precise structures.
Please do not discard the waste battery into
general household garbage. Please deal with
the waste battery according to provisions
where they are definitely made.
Tip: This user manual is based on simplified
Chinese operation mode; so it may vary in English
operation mode.
Warning: We will not be bear any responsibility
for any incompliance with the above guidelines
or improper use of the mobile phone. Our
company keeps the right to make modifications
to any of the content here in this user guide
without public announcement in advance. The
content of this manual may vary from the actual
content displayed in the mobile phone. In such
case, the latter shall govern.
MITO User Manual
8
2. Mobile Phone Profile
The mobile phone has the main keys on the
keypad, including single screen， one vibration
motor, one charger/ data common transmission
port. (Below is the front of the mobile phone).
1
2
3
4
5
6
7
8
9
10
MITO User Manual
9
1.
Receiver
7.
Keypad
2.
LCD
8 Chat
3.
Main menu key
9.
Audio player
4.
SEND 1key
10.
End key
5.
Internet service
11
Speaker
6.
SEND 2key
12
Camera
11
12
MITO User Manual
10
3. Preparation before Use
Install SIM Card
When registering mobile phone number,
you can apply for two different phone numbers,
two different mobile phone network service
providers and thus obtain two SIM (Subscriber
Identification Module) cards.
With these two SIM cards, you can use all
functions of your mobile phone. The SIM cards
save the parameters needed for communications
and personal data, including PIN (Personal
Identification Number) code, phonebook, short
message and other extra system services.
Warning: Do not distort or scratch the SIM card
nor let it contact static, dust or moisture. If it is
lost, please contact immediately your network
operator for help.
Before SIM card installation, please switch off
the mobile phone. The SIM card is installed on
the back of the mobile phone.
Follow the following diagram to install the
SIM card. Please insert the host SIM card into the
SIM1 slot and the slave SIM card into the SIM2
MITO User Manual
11
slot.
Note: If SIM card is inserted only into the
SIM1 slot, then only the host works; likely, If SIM
card is inserted only into the SIM2 slot, then only
the slave works. When two SIM cards are
inserted into the SIM1 slot and SIM2 slot
respectively, you can choose work mode freely as
you wish.
Note: As the SIM card is small object, keep it out
of children’s touch or prevent children gulping it!
SIM-1
SIM -2
MITO User Manual
12
Install Memory card
As the mobile phone does not have enough
storage space, to use some functions, you need
to install a memory card (This mobile phone use
T-FLASH card.)
Install T-FLASH card: Open the back cover to
take out the battery, release the T-Flash card lock,
insert the T-Flash card into its slot, and restore
the lock and the battery before restarting the
mobile phone.
T-flash
MITO User Manual
13
Note: As the T-FLASH card is small object, keep it
out of children’s touch or prevent children
gulping it!
Install Battery
The mobile phone is suitable for original
battery and accessories. When the battery is idle,
it is recommended to put it into the protection
box.
Follow the following diagram to install the
battery.
MITO User Manual
14
Note: Do install the battery as per the diagram so
as prevent the battery contact patch being
damaged.
Charge Battery
The new battery cannot reach the optimal
efficiency unless it has undergone several
continuous complete charges and discharges.
When the battery is used up, charge it in
time. Over-discharge can damage the battery.
After the battery is charged full, cut off the
connection of charger with the AC power supply
and the connection with the mobile phone.
Follow the following diagram to connect the
charger.
Battery
MITO User Manual
15
During charging, the battery capacity icon
on the screen flickers from the right to the left.
After the battery is charged full, the icon is full of
bars. Slight heat during charging is normal.
Warning: When a travel charger and its
accessories are used to charge the battery, please
firstly check if they are original or recognized by
the original manufacturer. The use of other
accessories may damage your mobile phone and
cause risks! Always use them indoor and dry
places.
Notices on using the battery
The performance of the battery is affected
by many factors, including radio barrier network
settings, signal strength, signal strength, work
temperature, chosen and used functions or
settings as well as phone accessories, tone, data
or other applications.
For optimal performances, please follow the
MITO User Manual
16
rules below:
New battery or the battery having been idle
for long need charging for long. The standard
voltage scope for the battery is 3.7V-4.2V.
During charging, keep the battery at room
temperature or similar temperature.
With time passing by, the battery will
gradually be worn and thus need longer time
to charge. This is normal. However, after
normal charging, if call duration decreases
but charging time increases, you need to buy
another battery from the original
manufacturer or authorized by the original
manufacturer. The battery of interior quality
can damage your mobile phone and cause
danger!
If the phone is overused at low battery when
charging, there might need a longer time for
the charge indicator to be shown on the
screen.
Note: Please dispose the battery according to the
local regulations. Try to recycle the battery as
possible. Do not treat the waste battery as
common waste.
Warning: Do not throw the battery into fire so as
to prevent fire. The broken battery may cause
MITO User Manual
17
explosion.
Warning
Charging the mobile phone by improper
means can cause to explosion. Always refer to
the related regulations for the disposal of the
battery.
PIN code
PIN1 Code: It is the personal identification
number used to enter SIM and able to prevent
others using SIM1 without permission. If the
mobile phone has activated the PIN1 code
protection, when the mobile phone is switched
on, the screen will display “Input PIN”. In the
process of inputting PIN1 code, the screen will
use “*” to represent the input content. While
obtaining SIM, you can obtain its PIN1 code.
PIN2 Code: It is the personal identification
number used for some special functions such as
paid call etc.
PUK Code and PUK2 Code(8-digit)
To change the locked PIN code, you need to
use PUK (Personal Unblocking Key) code. To
change the locked PIN2 code, you need to use
MITO User Manual
18
PUK2 code. If these two codes are not provided
together with the SIM cards, ask the local service
provider for them.
Warning: If the PIN code is input wrongly for
successively three times, the SIM card will be
locked. Please contact the network operator
immediately for help. Attempt to unlock the code
may make the SIM card ineffective forever!
4. General Instructions
Dial key
It is used to dial a call (with phone number
entered or in phonebook state) or receive an
incoming call. In standby state, press this key to
display the latest call register (SIM1 and SIM2
support respectively 20 call entries, including
received calls, missed calls and dialed calls). In
dual-SIM standby mode, press this key to have an
option menu on which you can choose to operate
via SIM1 or via SIM2.
Switch-on/off key /End key
In call state, it is used to interrupt a call; in
MITO User Manual
19
call conversation state, it is used to end a call or
exit from the current menu and back to the
standby state. Hold this key for 4~5s to switch
on/off the mobile phone.
Standard keypad
On the keypad, you can see A-Z （ 0-9
number keys ）number keys, * key and # key,
totally 35 keys.
Press these keys to input phone number,
password, English letters, and symbols or choose
menus.
Keypad lock
When in standby interface, if the mobile
phone is idle for certain time, it can be locked by
long pressing of the central key and then
unlocked by pressing “Unlock” and space key in
sequence. After the mobile phone is locked, the
keypad cannot be activated easily; in case of
incoming call, likewise, press the answer key to
receive it; after that, the keypad will be locked
automatically.
MITO User Manual
20
Icons in Standby State
Signal strength
Keypad Unlocked
Alarm clock
Vibrate then ring
Sending message(s)
Ring only
Missed call(s)
Vibrate only
Battery level
Vibrate and ring
Services
Services are provided with SIM kit. The
mobile phone supports service function. The
detailed menu items depend on SIM card and the
network. When the network provides such
function and your SIM card supports such
function, the service menu will automatically be
posted in the services of the mobile phone.
Callers’ group
The callers’ group in the mobile phone
includes friends, family, VIP, Business and others
etc. You can set different call tone and photo for
different callers’ group.
MITO User Manual
21
5. Basic operation
Switch on
Press the switch-on/off key to start the
mobile phone, then the screen will display
switch-on image. Then you can enter Settings
menu to set phone modes, including SIM1 &
SIM2 On, Only SIM1 On, Only SIM2 On and Flight.
The defaulted one is SIM1 & SIM2 On.
After insert SIM card, the mobile phone will
automatically check the SIM card availability, and
then it will be shown information as following on
the display by sequence:
1. “Input phone password”——If you have set
the password.
2. “Input PIN” —— If you set SIM card
password.
3. “No service”—Indicates fail to make register
and cannot make any calls.
4. “Emergency calls only”—indicates has
registered to other network and only can
make call to 112.
5. “Searching”—the mobile phone is searching
network until find appropriate network;
6. “Operator name”—Indicates network
successfully registered.
MITO User Manual
22
Note: If you do not know PIN code, please
contact the network service provider.
The defaulted phone password is 1122.
Switch off
To switch off the mobile phone, long press
of the end key. When the screen displays
switch-off cartoon, the host and the slave will be
off at the same time. Do not take out the battery
to switch off the mobile phone. If so, the SIM
card can be damaged easily and some data will
be lost.
Dial a Call
With the number keypad, you can enter
phone numbers (if wrong characters are
input, press the clear key to delete them).
Press the dial key to dial the phone number.
In SIM1 and SIM2 On state, you can choose
to dial a call via SIM1 or SIM2. To end a call,
press the end key; or to cancel a dial, press
the Cancel key or the switch-on/off key. After
the call is connected, you can see the call
timer on the screen.
Dial a call via phonebook: Enter the
phonebook and search the desired
MITO User Manual
23
name/phone number, and then press dial
key to dial call.
Redial latest dialed number: In standby state,
press dial key to view the list of the latest
dialed 20 phone number or names. Roll to
the desired phone number or name and
press dial key to dial call.
Adjust Receiver Volume
In call conversation, press the “left direct
key” and “right direct key” to adjust the volume
of the receiver.
Answer a Call
When there is a call, as per the settings of
the mobile phone, you will be alerted with ring,
vibration, vibration and ring as well as ring after
vibration.
To receive a call, press Dial/Call Key.
To refuse a call, press Switch-on/off key or
the end key directly.
To make the call silent, press the dedicated
soft key.
If the CLI (Call Line Identity) is opened, the
phone number of the caller will occur on the
screen. If this number has been saved in the
phonebook, the name corresponding to this
MITO User Manual
24
number will be displayed on the screen.
Send DTMF Signal
When this function is set, in call
conversation, press the desired number key and *
key and # key to send DTMF signals to the other
party. If such function is inactive, then extension
call will become impossible.
Dial Hold
If you have applied for dial hold, in the call
conversation process, press “Options” to have the
following function menus:
Pause: Pause the current call but with the
line keeping connected.
End: End the current call conversation.
New Call: Enter the dial interface, dial
another call.
Phonebook: Enter the directory of the
phonebook.
SMS: Enter the directory of the SMS.
Record: While having call conversation, you
can record the call.
Activate/Inactivate Hand free: You can
activate/inactivate the speaker.
DTMF: You can set whether to send DTMF
signals.
MITO User Manual
25
Note: Some menu items need the support of the
local network or can occur in special cases, such
as Conference and New Call. Consult the local
network operator for details.
Fast Read SMS
When the user receives unread SMS, the
screen will display an icon of unread SMS. Press
Read to enter and read the SMS. The SIM card 1
unread SMS icon is marked with “1” and SIM card
2 unread SMS icon is marked with “2”.
Missed Calls
When there is a missed call incoming, the
screen will display a missed call icon. And press
Read to enter and read missed calls.
Connect to Voice mail
The mobile phone allows connecting the
incoming call into the voice mail and then you
can receive a notice about voice message. (The
voice mail number must be preset).
MITO User Manual
26
6. Use of Menu Functions
Multimedia
Camera
With this function, you can use the inbuilt camera to
take photos. The lens of the camera is located on the
back of the slide and the screen is used as the
viewing window. All photos taken are in JPG format.
After downloading the photos onto PC, you need
some software to view them.
If the storage space of the mobile phone is
insufficient to store the taken photos, it is necessary
to delete some old photos or other files in “File
Management” function list to release more space.
Description of Mobile Phone Options:
Options
Description
Photos
To view the saved photos.
Camera Settings
Shutter Sound: sound 1, sound 2, sound 3 and
EV: EV-4 ——EV+4.
Contrast: High, Medium, Low.
MITO User Manual
27
Banding: 50Hz(default), 60Hz.
Delay Time: 5s, 10s, 15s or Off.
Cont. Shot: 1 Shot , 3 Shot , 5 Shot and Off.
Image Settings
Size: 220*176, 320*240, 640*480.
Quality: High, Normal, Low.
White Balance
Auto, Daylight, Tungsten, Fluorescent, Cloudy
Scene Mode
Auto, Night.
Effect Settings
Normal, Grayscale, Sepia, Sepia green, Sepia blue
Storage
Phone, Memory Card.
Restore Default
You can restore the recorder to factory settings.
Image viewer
All photos taken are saved in the album.
Options
Description
View
You can view the selected photos.
Use as
You can send photo to wallpaper ,Screen
saver, power on display, power off display,
call picture.
Send
As multimedia message or via Bluetooth.
Rename
You can rename the selected photo.
Delete
You can delete the selected photo.
Delete All files
You can delete all photos in the album.
Sort by
For convenience of search, you can rank
them as per name, type, time and size or
choose “None”.
Storage
You can choose photos storage path (to
phone or memory card).
MITO User Manual
28
Video recorder
Press the key at the bottom to start video
recording. The duration of recording depends on the
time limit set and file management capacity. Entering
the options, you can have the following settings:
Options
Description
Camcorder
Settings
You can set Anti-flicker and Quality for
your videos.
Storage
You can choose photos storage path (to
phone or memory card).
Restore Default
You can restore the recorder to factory
settings.
Video player
It supports the videos in AVI (MPEG ncoding
and quality QCIF).
Options of the player
Options
Description
Play
It supports the videos in AVI and will not be
limited by file size. Click the play interface
to play.
Send
As multimedia message or via Bluetooth.
Rename
You can rename the specified video.
Delete
You can delete the specified videos.
Delete all files
You can delete all files.
Sort by
For convenience of search, you can rank
them as per name, type, time and size or
MITO User Manual
29
choose “None”.
Storage
You can choose video storage path (to
phone or memory card).
Audio player
If the operation system is Windows 2000 above, no
driver needs installing. To download music, you must
insert the T-Flash card into the mobile phone, switch
off the mobile phone, connect the mobile phone
and PC with USB cable, then the PC will detect the
new hardware and create a new mobile HD.
Download the chosen MP3 file to under "My Music"
of the mobile disk rather than in such folders as
Audio, Images and Photos; otherwise, the file cannot
be played. (Only the music in MP3, AMR and MIDI
are supportable).
Description of audio player options:
Options
Description
Play
Play the current chosen music.
Details
View file name, track, SQ, file size, music
duration, music name, singer, music type etc.
Add to
Ringtones
Add the chosen music into the ring base.
Refresh
list
Enter the tracklist and update it (e.g. the
deleted music in the file management will not
disappear until update is conducted).
Settings
Play Settings: tracklist path, automatic tracklist,
repeat, shuffle ,background play, show lyrics.
MITO User Manual
30
Sound Recorder
After choosing ‘Sound Recorder’ and press ‘OK’ to
enter, you can the previous record files. Press
‘Options’ to have the following operations:
New Record: You can record new files.
List : You can view the list of the recorded
files.
Play: You can play the chosen file.
Append: You can have annex record for
the files of the superior level (only for
the record files in AMR).
Rename: You can rename the chosen
file.
Delete: You can delete the chosen file.
Delete All files: You can delete all files.
Use as: You can used as user profiles.
Send: You send the record file to
Bluetooth, or as multimedia message.
Settings: You can set the audio storage path
(Phone or Memory card), the file format
(AMR or WAV)and the audio quality (High
or Low).
MITO User Manual
31
FM Radio
Your mobile phone supports FM radio. To use the
mobile phone to listen to radio, insert the headset
connection cable into the headset port on the
mobile phone. The headset connection cable
functions as the antenna of the FM radio, so it
should hang freely. While listening to radio, you can
dial or receive a call normally. During call
conversation, the radio will turn mute automatically.
If some applications are using GPRS or CSD to send
or receive data, they may interfere with the radio.
When the FM radio is activated, the mobile phone
will display the number and name (if having been
saved) and frequency of the radio channel. If you
have saved some radio channels (at most 9 channels)
in the mobile phone, you can roll to choose the
desired channel or press any of number keys 1-20 to
choose the corresponding channel.
Option menu
Channel list: You can edit and save 20
channels.
Manual input: You can edit the specified
radio frequency band. The frequency of the
radio is between 87.5mHz and 108.0mHz.
MITO User Manual
32
Preset Auto Search: You can have automatic
search and save the searched channels into
the list.
Settings: You can set background play, loud
speaker, record format, audio quality and
record storage.
Record: You can record new files.
Append: You can have annex record for the
files of the superior level (only for the
record files in AMR).
File list: You can see the list of the recorded
files.
Schedule FM record
You can schedule to record certain FM Radio
channel at any time, so that you will not miss the
program.
Phonebook
The mobile phone is provided with the business
card folder type phonebook. The information of
every contact saved on the mobile phone include
three phone numbers (mobile phone, home phone
MITO User Manual
33
and company phone), company name, e-mail, fax,
birthday, big-head sticker, tone, callers’ group (five
types: family, friends, VIPs, colleagues and others).
Every contact saved into SIM1 and SIM2 can only
include name and number. The mobile phone
supports 1,000 groups of numbers.
Quick Search
You can Input the English letter in the position
where the cursor is flickering to position the contact
from these contacts that meets the conditions.
Search contact
Input the name to be searched, press “Search” in
the phonebook, then you can find the matching
name.
Add New Contact
You can save phone numbers onto SIM card,
phone, or existing contact. On SIM card, one
entry has only name and phone number. On the
phone, one contact can include Name, Number,
Home Number, Company Name, E-mail Address,
Office Number, Fax Number, Birthday, Associate
Picture, Associate Sound and Caller Group. On
existing contacts can add numbers to existing
MITO User Manual
34
contact earlier.
Tip: If one contact is set with photo link, tone link
and callers’ group at the same time, then the callers’
group function will be inactive.
Copy all
You can copy the contacts from the phone to SIM
Card or from the SIM card to phone.
Delete
You can delete the contacts from the phone or
from SIM Card.
Caller Groups
You can set call tone, photo and members for five
callers’ groups. Callers’ group member can only
come from the number saved on phone.
Extra Numbers
You can separately set SIM1 and SIM2’s My
Caller ID, service numbers and emergency
numbers (the latter two needs the support of the
SIM card, consult the network operator for
details).
Phonebook Settings
Memory Status: You can view the current use
MITO User Manual
35
status of the phonebook, including SIM1,
SIM2 and phone memory. The display format
is “Used/Total”.
Preferred Storage: You can choose the
storage path for the current number.
Fields: You can choose the display items in
the phonebook and the display items in the
Add Contact interface.
My vCard: You can edit and send my business
card.
Vcard version: including vcard 2.1 and vcard
3.0
Notify Birthday: Set the time to remind you a
birthday stored into the phonebook.
Call center
Call center includes Call history and Call Settings.
In dual-SIM mode, you can separately search the
call register of SIM1 and SIM2 and set separately
some operations corresponding to SIM1 and
SIM2. In mono-SIM standby mode, you can set
the available SIM card and see its call
registration.
MITO User Manual
36
Call history
It includes missed calls, dialed calls and received
calls, delete call log, call time, call cost, SMS
counter, GPRS counter etc.
In missed calls, received calls and dialed calls
function list, you can see the date and time of the
call, edit or delete the phone number in the list,
save the number to phonebook or send SMS and
MMS to the number, etc.
Note: SIM1 and SIM2 contains respectively 20
entries. Choose any entry from missed calls,
received calls and dialed calls, press the Send key
to dial the number directly.
Call timers
Last Call: With this function, you can view
the last call time.
Dialed calls: With this function, you can
view the duration of all dialed calls.
Received calls: With this function, you can
view the duration of all received calls.
Reset all: With this function, you can clear
all duration records of calls.
MITO User Manual
37
Note: The actual call duration and service time in
the bill of the service provider may be different from
them, which depends on the network functions,
accounting rounding and tax etc.
Call Cost
This needs the support of the network service
provider.
Last Call Cost: With this function, you can
view the fees of the last call.
Total Cost: With this function, you can view
the fees of all calls.
Reset Cost: With this function, you can clear
all fee records.
Max Cost: With this function, you can limit
call fees in the specified pricing unit or
currency unit. PIN2 code must be input to
set call cost.
Price Per Unit: This function needs network
support. For more details, please consult
the network operator.
SIM text message Counter
With this function, you can see and preset the
MITO User Manual
38
number of sent messages and received messages.
GPRS Counter
Last Sent: You can view the sending traffic
of last link.
Last Received: You can view the reception
traffic of last link.
All Sent: You can view the sending traffic of
all links.
All Received: You can view the reception
traffic of all links.
Reset Counter: You can clear all link traffic.
General Call settings
[SIM Card settings]
Caller ID: Including set by Network, hides ID and
send ID.
Set by Network: While having a call
conversation, you can send my caller ID in
the form preset by the system.
Hide ID: While having a call conversation,
you will not send my caller ID. If the system
does not support such function, call may
fail.
Send ID: While having a call conversation,
MITO User Manual
39
you can send my caller ID to the system.
Note: This function needs network support.
Call Waiting: You can set this function to On or
Off. The call hold and multi-party call cannot be
active unless this function is activated. This needs
network support.
Call Divert: This is a kind of network function,
which cannot be used unless you apply to the
network operator for it. With this function, you
can divert call to another number.
Name
Description
Divert All
Voice Calls
The network will divert all
voice calls without
conditions.
Divert if
Unreachable
When the network cannot
find your mobile phone
(switched-off or out of the
service area), it will divert
the calls.
Divert if no
Answer
When the mobile phone
does not answer the call,
the network will
automatically divert it.
Divert if Busy
When you are on line, the
MITO User Manual
40
network will divert the call.
Divert All
Data Calls
Network support needed.
Cancel All
Diverts
Cancel all divert functions.
Call Barring
Outgoing Calls:
All Calls: You can bar all outgoing calls.
International Calls: You can bar
international calls.
International Calls Except To Home: When
abroad, you can dial the calls of the current
country and the original country (the
service providers allows to do so).
Incoming Calls:
All Calls: You can bar all incoming calls.
When Roaming: You can bar all calls except
the calls of the local service area.
Cancel All: You can cancel call barring settings
and dial/receive calls normally.
Change Barring Password: You can apply to the
network to change the password for call barring.
[More]
Call setup Firewall: You can set the firewall
MITO User Manual
41
as the phone guides.
Auto Redial: You can set it as On or Off.
After the first automatic redial fails, you can
have at most ten times to connect a phone
number.
Speed dial: Set the function On or Off.
Call time display: Set the function On or
Off.
Call time reminder: Set the function On or
Off.
Note: Some settings need network support. For
example, call barring cannot be used unless the local
network and SIM card open it.
Services
Bluetooth
The mobile phone supports the Bluetooth function.
You can use Bluetooth wireless technology to set
wireless connection with other compatible devices,
including mobile phone, computer, headset, in-car
accessories etc. With Bluetooth function, you can
send photo, video segment, audio segment, personal
business card and memo. You can also establish
wireless connection with the compatible PC to
transmit files and connect to web by dialing number
MITO User Manual
42
via SIM.
As the device supporting Bluetooth wireless
technology performs communications via wireless
wave, you need not keep the device opposite to
other devices but keep the distance between them
not more than 10m (about 33”). However, Bluetooth
connection can be affected by wall or other
electronic equipments etc. To ensure mutual
operation between this device and other devices
supporting Bluetooth wireless technology, consult
the manufacturer to confirm whether the device by
it is compatible with this device. Do not use
Bluetooth function in hospital and aircraft etc.
Bluetooth Menu
Power: Before using Bluetooth function, you
need to activate this option. When Bluetooth
function or other functions are being used,
allowing this function to operate in the back desk
will consume more power. It is recommended to
close this function when it is idle.
Inquiry audio device: With this function, you can
inquiry audio device. For other devices, enter My
Devices to search.
My Device: After entering this option, you will
see the Bluetooth devices compatible with the
MITO User Manual
43
mobile phone. Entering options, you can have
necessary operations on the desired Bluetooth
device or search the incompatible Bluetooth
devices.
Active Devices: With this function, you can see
all devices connected with the mobile phone and
their link service type. You can interrupt the
specified link service.
Settings: Before using Bluetooth function, enter
this menu to have corresponding settings. If your
mobile phone’s Bluetooth function is not
activated, you can have activation confirmation.
Visibility: After this option is activated,
other peripheral devices supporting
Bluetooth wireless technology can see
your device and its name via search. After
the step audio play service is activated, this
device will be unable to be searched.
Change Device Name: You can edit my
device name.
Authentication: After this option is
activated, matching is needed when
peripheral device accesses ‘my device’ via
Bluetooth (for matched devices as well).
After closing the option, no matching is
needed for the matched devices.
MITO User Manual
44
Audio Path: You can leave the audio on my
device or send to other hand-free devices
via Bluetooth. If using Bluetooth to have a
call, set this path as hand-free devices.
FTP Settings: You can set the file directory
shared by my device and the access right
to online Bluetooth devices.
About: Here, you can see the name of my device,
my device’s Bluetooth device address and the
Bluetooth services supported by my device.
Tip: When searching Bluetooth devices, make sure
that the peripheral Bluetooth devices are within the
signal cover range and can be searched. To match
the searched devices, you need to discuss with the
user of this device about a pair of matching
passwords. To match the hands-free device, you
must input its matching password. After matching,
this device will be saved in my device view.
WAP
Homepage-- Start the website chosen in the
connection settings file.
Bookmarks— Enter the options menu and have
the following operations on the bookmark:
Go to: Log into the chosen website.
MITO User Manual
45
Edit: Edit the chosen bookmark
name and website.
Send: Send the bookmark as text
message or multimedia message.
Delete: Delete the chosen
bookmark.
Delete all: Delete all bookmarks.
Add bookmark: Add new
bookmarks.
Recent pages: Record the latest 10 web pages
browsed.
Offline pages: You can view these pages when
you offline.
Input address: Input the website to be logged
in.
Service Inbox: The mobile phone can receive
the service information (“Recommended”
information) sent by the service provider. For
example, the service information can be the
notice of related news headlines, which can
include one piece of news or a service website.
Settings:
Select SIM: Always ask/SIM1/SIM2
Edit account: By this function you can edit
the account.
Browser options-- You set whether to
MITO User Manual
46
display images during waiting time and
when browsing WebPages.
Service message settings-- You can choose
ON or OFF to enable the push or not and
you can choose the disable or always in
the Trust settings. Set SL settings functions
as follow: Never, confirm, without confirm.
Add new trust list including: number, IP
address, Domain name.
Clear cache -- You can clear cache. When
the data of the cache are excessive,
network surfing speed can be affected.
Clear cookies-- You can clear personal data.
Trusted certificates -- Entrust.net WAP CA
©1999 Limited liability. See
www.entrust.net/wapcps; US VeriSign, Inc.
Class 3 Public, primary certification
authority.
Data account
GSM Data—You can set the number, name DNS
etc.
GPRS—You can set the name, APN, user name,
password, Auth. type, DNS.
Note: For related charging standard and detailed
settings, please consult the local network
MITO User Manual
47
service operator. Different network service
providers provide different services.
Consult the local network operator.
To set up your WAP service, you have to go
through two steps. Step 1 is to set up a Data
Account. The next is to set up your browser and
link to the Data Account you have set up.
Messages
Text message
SMS is a kind of network service that cannot be
used to send and receive short messages until you
apply to the network operator
Both SIM cards of the mobile phone can send
and receive SMS. The SMS is sent to the SMS center
of the network and then sent by the network to the
target user (GSM user). If the user does not switch
on the mobile phone or the mobile phone cannot
receive the SMS (the memory is full), the network
will save the SMS temporarily. The duration of
storage depends on sender’s settings and network
service provider.
With this function, the mobile phone can send
and receive chain text messages, which may affect
the message fees. For more information, please
MITO User Manual
48
consult the service provider.
When the SMS capacity is full, there will be an
SMS icon flickering on the standby interface. The full
capacity can affect SMS reception. Delete some SMS
to solve the problem.
If the other party has received SMS, you will
hear the alert sound from the mobile phone (if such
alert function is set as ON)
Note: When sending SMS via the SMS network, the
mobile phone may display “Message sent”. It
indicates that the SMS has been sent to the SMS
center inbox set in the mobile phone but does not
mean the receiver has received the SMS. For more
information, please consult the service provider.
Write Message
You can write message in this menu.
To write SMS, press “Aa” key to switch input
modes, “sym” key to select Symbol; press “Del key”
to clear one character before the cursor, long press
“Del key” to delete all characters; press the end key
to back to the standby interface, press the up and
down direction key to choose characters, press
“select” key to confirm.
The mobile phone can send the chain SMS
more than 160 characters (limit for common text
messages). If the SMS contains more than 160
characters, then the SMS will be split into 2pcs or
MITO User Manual
49
more. However, the SMS will not be received and
displayed unless the network and the receiving
mobile phone support.
You can enter the phone number or choose a
number from the phonebook to send the SMS. In
dual-SIM standby mode, you can choose to send the
SMS via SIM1or SIM2.
Inbox
You can see the SMS in the SIM1/SIM2 inbox.
Reply: You can reply to the received SMS.
Delete: Delete the current SMS.
Forward: You can directly forward this SMS to
others.
Copy to phone: You can copy the entries in SIM
card onto the phone.
Move to phone: You can move the entries in
SIM card onto the phone.
Delete all: You can delete all SMS in inbox.
Copy all: You can have two options, i.e. copy all
entries on the SIM card in the inbox onto the
phone or vice versa.
Move all: You can have two options, i.e. move
all entries on the SIM card in the inbox onto the
phone or vice versa.
Use number: You can extract the number in the
MITO User Manual
50
SMS and save it or dial a call.
Use URL: You can link to the website contained
in the received SMS.
Outbox
While sending SMS, if choosing “Save and send”,
you can save the SMS into the Outbox. You can
directly save the edited SMS into the Outbox, in such
case; the Outbox will display “No number”, i.e. no
target number. If you fail to send the SMS, it will be
saved in the Outbox. Also, you can have such
operations as Send from SIM1/SIM2, Edit, Delete,
Copy to phone, Move to phone, Delete all, Copy all,
Move all, Use number, Use URL, Use USSD.
Junkbox
The unwanted messages will be saved here.
Templates
With it, you can pre-edit some common phrases,
which is convenient for quick SMS editing.
SMS settings
You can set some parameters of the SIM1 SMS
or SIM2 SMS in the menu.
Profile settings: To send SMS, you must
input the SMS center number.
Note: The SMS center number is provided by the
network operator.
Common settings
MITO User Manual
51
Delivery report: The network will
inform you whether the other party
has received the SMS and what the
time is.
Reply path: You can send the reply
path to the network terminal. This
function needs the support from the
SMS center.
Memory status: You can view the capacity
of the SIM card or the phone for SMS by
number.
Preferred storage: You can set the storage
position (SIM or phone) for SMS.
MMS
MMS can contain words, sound and photos. If
the MMS is out of the limit, the mobile phone will be
unable to receive the MMS. If the SMS contains
photos, the mobile phone will adjust photos so as to
display them on the screen completely.
The display effect of MMS depends on
reception devices.
Note: You cannot use photo messages unless the
network operator or service provider supports to do
so. You cannot receive and display MMS unless the
mobile phone has the compatible MMS or e-mail
MITO User Manual
52
function.
Write message
To
Add Number-- Input the number of the
receiver.
Add E-mail-- Input the e-mail of the
receiver.
Edit – Edit the number of the
receiver.
Delete -- Delete the number of the
receiver.
Delete all -- Delete the numbers of all
the receivers.
Subject: You can edit the subject of the MMS.
Edit content
Press Edit key to have the following options:
Done: You can confirm what you wrote
in the message.
Writing language: You can select the
language to use in the message and
the Input method.
Add picture: You can insert your
desired picture.
Add audio: You can insert your desired
audio.
Add video: You can insert your desired
MITO User Manual
53
video.
Add attachment: You can insert you
desired attachment.
Add slide before: You can add a slide
before the current page.
Add slide after: You can add a slide
after the current page.
Add bookmark text: You can add a
bookmark from your personal list.
Preview: You can preview the editing
effect of the current MMS.
Slide timing: You can set the play time
of every slide.
After editing, you can press “Done” key to finish
the MMS. In this option you can send the MMS as
following methods: Send only, Save and send, Save
to Drafts or Save as Template. You can also set the
sending options, including: Validity period, Delivery
report, Read report, Priority.
Inbox
You can see the MMS in the inbox and have the
following operations:
View: You can view the MMS and save photos,
audio and annex.
Reply: Reply the sender with MMS Reply by
MITO User Manual
54
SMS: Reply the sender with SMS.
Reply all: If the MMS you received has been
sent to many receivers by the sender, with such
function, you can send a reply MMS to the same
receivers.
Forward: You can directly forward this MMS to
others.
Delete: Delete the current MMS.
Delete all: You can delete all MMS in inbox.
Save as template: You can save the MMS as
template.
Properties: View the detailed information of the
current message.
Use details: You can extract the number in the
MMS and save it or dial a call. You can also use
the URL in the MMS.
Outbox
You can view the MMS send and saved in the
Outbox and failed and have such operations as View,
Send, Delete and Delete all, Save as template,
Properties and Use details.
Drafts
You can save the edited MMS into the drafts,
and also you can have such operations as View, Send,
Edit, Delete and Delete all, Save as template,
Properties and Use details on the MMS in the drafts.
MITO User Manual
55
Templates
There are 5 preset short sentences for MMS in
the mobile phone and you can have such operations
as View, Write message and Properties from
Template. You can also access and edit the
user-defined templates.
Message settings: You can set some parameters of
the MMS in the menu.
Server profile:
In dual-SIM mode, you can separately set SIM1
and SIM2. After choosing Settings, you can have the
following settings:
Activate account.
View account: You will view the
Account name, MMSC address, Data
account, Connection type, User name
and Password of the account.
Common Settings:
Compose:
Creation mode-- "Free" , “Restricted "
and “Warning”.
Picture resizing-- You can reduce the
size of the inserted photo, including:
160*120, 320*240 and Off.
Best page time-- You can set On or Off
to activate such function.
MITO User Manual
56
Auto signature-- You can set On or Off
to activate such function.
Signature-- You can edit the content of
the automatic signature.
Send:
Validity period-- You can set the time
to save in the MMS service center and
send, including Maximum, 1hour,
6hours, 12hours, 1day, 1week.
Delivery report--You can set On or Off
to activate such function.
Read report-- You can set On or Off to
activate such function.
Priority-- Including Medium, High, Low.
Slide timing-- You can set the interval
of the receiver to see the MMS,
defaulted as 5s
Delivery time --Immediate, 1hour later,
12 hours later and 24 hours later.
Retrieve:
Home network—Immediate, Rejected
and Delayed.
Roaming -- The same as to the main
network, including and As home,
Delayed and Rejected,.
Read report—On request, Send, Never
MITO User Manual
57
send
Delivery report—You can set On or Off
to activate such function.
Filter:
Anonymous -- Allow and Reject.
Advertisement-- Allow and Reject.
Memory Status:
You can see the utilization rate of the
mobile phone, including the used
space and the usable space. The sub
menu should show SMS capacity in
Numbers.
Broadcast Message
Cell broadcast is a kind of information service
such as weather report, traffic etc that the network
operator sends to the GSM users within certain area.
In dual-SIM mode, you can separately set SIM1 and
SIM2.
Receive mode: You can ON/OFF to activate
such function.
Read message: You cannot read the received
information until you open such function.
Languages: You can set the language for the
received information. The defined is All
languages.
MITO User Manual
58
Channel settings: You can Select, Add and Edit
and Delete channel number.
Facebook
By pressing this menu, you will be connected to
Facebook. Then, you can enjoy accessing the well
known Facebook social networking.
Twitter
By pressing this menu, you will be connected to
Twitter. Then, you can enjoy accessing the well
known social networking.
Organizer
Calendar
With this function, you can set the alarm
clock to remind you of your schedule and record
your schedule. Roll the highlight block to the
desired date and then the current date will be
highlighted in green. If the date is set with memo
function, then this date will be highlighted in red.
To view all memos of one day, press OK to see the
schedule. You can have the following operations:
View today: You can view the schedule of the
date where the cursor is on and set the time,
MITO User Manual
59
date, content and whether to activate alarm
on this schedule of today’s. When editing the
schedule, you can choose alarm type with
the left and right direction keys. In addition,
you can have such operations as Delete,
Delete and Add on the schedule.
View all: You can view the entire schedule of
the date where the cursor is on and set the
time, date, content and whether to activate
alarm on this schedule.
Add event: you can select task type as
reminder, meeting, course.
Delete event: You can delete the task as the
phone guides.
Jump to Date: You can move to the calendar
of the specified date.
Go to monthly view: You can go to weekly or
monthly view.
Alarm
The time format for the alarm clock is
identical to that of clock. When the mobile phone
is off, the alarm clock can still work provided the
battery is sufficient. The system has set 5 alarm
clock options and the defaulted is off. You can
activate one option or all options according to
the actual demand. Every alarm clock option can
MITO User Manual
60
set independent time and date. When the time is
reached, the mobile phone will give out alert
tone and flicker the current time and date on the
screen. Press Stop to stop alarm clock; press
Sleep, then the mobile phone will pause ringing
and continue after 4min.
If alarm time is reached but the mobile
phone is switched off, then the mobile phone will
be switch on automatically and ring. If Stop is
pressed, then the mobile phone will ask you
whether to switch on the mobile phone. Press
“No” to switch off the mobile phone and “Yes” to
register at the network and switch on the mobile
phone.
World clock
Press the left and right direction keys to
view the current time of every country
corresponding to every time zone.
Calculator
The upper direction key for “+” and the
lower direction key for “－”, the left direction
key for "×" and the right direction key for "÷";
Press the clear key to clear the latest inputs
or results digit by digit; press the clear key
long to clear all content or result;
Press “OK” key to obtain the result.
MITO User Manual
61
Note: The precision of this calculator is limited
and can be used for simple calculation.
Currency Converter
To save exchange rate, press “OK”, then
choose to set exchange rate. Choose one
exchange rate from the displayed options. After
that, press “OK” to confirm. Then the exchange
rate will be saved in the memory until you enter
a new one to replace it. To convert currency,
enter the sum to be converted, press “OK” and
then choose to local currency or foreign currency.
Fun & Games
This mobile phone provides the inbuilt game Puzzle.
Please refer to the operation instructions attached to
the game.
Game settings
BGM: On or off background audio.
Sound effect: On or off audio.
Vibration: On or off Vibration
Volume: Up and Low Volume
File Manager
You can manage photos, MP3 and folders.
[Phone]-- The storage body is phone.
[Memory card]-- The storage body is memory
MITO User Manual
62
card.
Open: You can open Images, Audio,
Videos, Photos, Received, etc.
Audio—Audio folder
Play: You can play the selected content.
Use as: You can send audio to Profiles.
Send: You can send audio via MMS or
Bluetooth.
Details: You can see the date and size of the
file.
Rename: You can rename the file.
Copy: You can copy the file into Audio,
Images, My Music, Photos, Video or
specified folders.
Move: You can move the file into Images, My
Music, Photos, Video or specified folders.
Delete: You can delete the current record.
Delete All files: You can delete all records in
all current folders.
Mark several: You can select multiple files at
a time.
Sort by: You can rank files as per name, type,
time and size or choose “None”.
Images—Images Folder
MITO User Manual
63
View: You can see the current image.
Use as: You can send the image to Profiles.
Send: You can send images via MMS or
Bluetooth.
Details: You can see the date and size of the
file.
Rename: You can rename the folder.
Copy: You can copy the file into Audio,
Images, My Music, Photos, Video or
specified folders.
Move: You can move the file into Audio, My
Music, Images, Photos, Video or specified
folders.
Delete: You can delete the current record.
Delete All files: You can delete all records in
all current folders.
Mark several: You can select multiple files at
a time.
Sort by: You can rank files as per name, type,
time and size or choose “None”.
My Music—MP3 Folder
Play: You can play the current MP3.
Use as: You can send music to Profiles.
Send. You can send music via MMS or
Bluetooth.
MITO User Manual
64
Details: You can see the date and size of the
file.
Rename: You can rename the folder.
Copy: You can copy the file into Audio,
Images, Photos, Video or specified folders.
Move: You can move the file into Audio,
Images, Photos, Video or specified folders.
Delete: You can delete the current record.
Delete All files: You can delete all records in
all current folders.
Mark several: You can select multiple files at
a time.
Sort by: You can rank files as per name, type,
time and size or choose “None”.
Photos—Photo Folder
View: You can see the current photo.
Use as: You can send photos to Profiles.
Send: You can send photos via MMS or
Bluetooth.
Details: You can see the date and size of the
file.
Rename: You can rename the folder.
Copy: You can copy the file into Audio,
Images, My Music, Photos, Video or
specified folders.
MITO User Manual
65
Move: You can move the file into Audio, My
Music, Images, Video or specified folders.
Delete: You can delete the current record.
Delete All files: You can delete all records in
all current folders.
Mark several: You can select multiple files at
a time.
Sort by: You can rank files as per name, type,
time and size or choose “None”.
Video—Video Folder
Play: You can play the current video.
Send: You can send videos via MMS or
Bluetooth.
Details: You can see the date and size of the
file.
Rename: You can rename the folder.
Copy: You can copy the file into Audio,
Images, My Music, Photos, Video or
specified folders.
Move: You can move the file into Audio,
Images, My Music, Photos or specified
folders.
Delete: You can delete the current record.
Delete All files: You can delete all records in
all current folders.
MITO User Manual
66
Mark several: You can select multiple files at
a time.
Sort by: You can rank files as per name, type,
time and size or choose “None”.
New Folder: Under the root directory, you can
create a new folder to save more detailed files.
Format: Formatting can clear all files in the
mobile phone or in the memory card, and newly
created folders. After formatting, you need to
restart the mobile phone and the Audio folder
and Images folder will restore automatically and
Photos folder will automatically occur after the
first photo is taken.
Rename: You can rename the newly created
folder.
Details: You can view the available space to
create new folders.
User Profiles
Your mobile phone is provided with multiple
profiles so that you can customize some settings
in different cases for different events. Firstly, as
per your personal hobby, select individual
settings on profile and then activate it. You can
have such profiles as General, Meeting, Outdoor,
Indoor, Headset.
The content can be edited at every profile mode
MITO User Manual
67
as following:
Tone Setup: Include Incoming Call, power-on,
power-off, Message Tone and Keypad Tone.
Volume: Set the volume of Ringtone and
Keypad Tone.
Alert type: You can choose the current ring
mode from any one of the following: Ring
only, Vibration only, Vibration and Ring，
Vibration then Ring.
Ring Type: You can choose the current ring
type from any one of the following: Single,
Repeat and Ascending.
Extra Tone: You can have on/off settings on
Warning Tone, Error Tone, Camp On Tone
and Call Connect Tone, so as to have
corresponding tone tips.
Answer Mode: You can choose whether to
use any key to answer.
After individualized settings, choose “Activate” in
“Select” to start profiles.
Note: After the headset is inserted into the
mobile phone, the mobile phone will
automatically change into headset profile. Unplug
the headset to return to the previous profile.
In standby state, you can press the silence key to
MITO User Manual
68
switch to silence profile and again to the previous
profile.
Settings
Dual SIM settings
You can in any place and at any time set the
dual-mode mobile phone as the following modes
according to your own demand:
o Dual SIM open
o Only SIM1 open
o Only SIM2 open
o Flight mode
Phone Setup
In such menu, you can set phone language, standby
wallpaper, time etc.
Time and Date: With this function, you can
set city, time and date format and the time
of specific place.
o Set Home City: You can set
different cities.
Note: This option must be used together with auto
update of time and date. Auto update of time and
data cannot be conducted unless there is network
MITO User Manual
69
support.
o Set Time and Date: You can
set the current time and
date.
o Set Format: You can set the
display format for time and
date.
o Time Zone Update: If you
enable this option, the
device will change the time
zone automatically as you
travel.
Note: If the battery is taken out of the mobile phone
or the battery is used up for a long time, when
switching on the mobile phone after reinstalling the
battery or charging the battery, you need to reset
the time and date.
Schedule Power on/off: You can set the
time for schedule Power on/off.
Special Note: In the area forbidding using mobile
phone (such as cabinet), you must confirm to
inactivate this function before entering this area so
as to prevent accident.
Language: You can choose the desired
MITO User Manual
70
language for phone display.
Display characteristics: You can set standby
menu display as wallpaper, screen saver,
power on display, power off display,
whether to display time and date and
owner number (if set in the phonebook).
Greeting text: You can set the greeting text
displayed on the main screen.
Shortcuts: You can add some menu in this
menu in order to do not look for them
every time.
Navigation keys: You can set the assignment
of the central navigation keys.
Auto update of date and time: To set the
mobile phone to automatically update time
and date according to the current time zone,
choose ‘Activate’. Auto update of time and
date will not affect the alarm clock,
calendar or alarm clock memo setting time,
which will be subject to the time and date
when created. However, auto update of
time and date may make some set alarm
clocks out of date.
UART Setup: You can select the SIM to use
for the connection with your PC.
Misc. Settings: You can adjust the
MITO User Manual
71
brightness and time of LCD backlight.
Network Setup
Network Selection: You can search the network
again. Select your favorite network and choose to
register the network automatically or manually.
Preferences: You can set the preferred registered
network for SIM card.
Security Setup
SIM Security Setup:
SIM Lock: You can set SIM lock (PIN
code) as on/off. When this option is
chosen, it is necessary to input PIN
code for every insert of the SIM
card.
Fixed Dial: This function needs the
support of the SIM card and the
network operator. When it is
activated, you can only dial the
phone numbers saved in host fixed
dial list. To activate it, you need to
input host PIN2 code.
Barred Dial: You can set barring all
or some dials. (SIM card support
needed).
MITO User Manual
72
Change password: You can change
the PIN (personal identification
number) code into a 4-digit number
that is easier to remember.
Phone Lock: You can set it as On or Off. It is
a password of 4-8 digits and the default
one is 1122. You can change it.
Auto Keypad Lock: You can set it as On or
Off. The mobile phone has keypad lock
function. When it lasts certain time, the
keypad will be locked, including such
options as Off, 5s, 30s, 60s and 5min.
Change Password: You can change the
default phone password ‘1234’ into
4-8-digit number that is easier to
remember. If the phone lock is activated,
when switched on, the mobile phone will
hint.
Message Firewall: Set and save the
Blacklist and the White list; you can also
set the message firewall.
Privacy firewall：Input the password and
you can enter the function to set the
Privacy Phonebook, Privacy Message lock
and Privacy Call History lock.
MITO User Manual
73
Restore Factory Settings
You can restore the factory settings of the mobile
phone. The default password is 1122.
7. Coffer Function
You can access the Coffer function only
aftyer entering the password from the standby
interface.
All call history, SMS etc produced by the
contacts saved in the coffer will be saved in the
coffer and no hint is left out of the coffer. When
the coffer receives SMS, there will be SMS
envelope hint and message alert tone rather than
message alert menu occurring in the standby
menu
The characteristics of the phonebook, SMS
and MMS etc in the coffer not mentioned are the
same as those out of the coffer.
Enter the coffer:
In the standby interface, input “*”, coffer
password (initial value is 0000, able to be
modified) and then “#” to enter the coffer.
Coffer phonebook
The coffer phonebook supports 10 private
MITO User Manual
74
contacts.
Browse
You call see all contacts on the phonebook.
Press the left softkey to enter the option menu of
a contact and then you can have such operations
as Send, View, Edit, Delete, Delete All and Save
etc. Saving is to move the contact into the
phonebook out of the coffer.
Press the dial key to dial a call. If the contact
has false name or false phone number, then
screen will display false name or number and the
call history this time can be saved in the coffer.
Add Calls
In this interface, you can add name, number,
false name or false number.
Note: For outgoing calls, incoming calls or SMS
reception, if one contact sets false name and
number, then the false name will be displayed; if
not, “Unknown contact” will be displayed.
Settings
View Capacity: You can view the use status in
the coffer phonebook. The display format is
“Used space/Total space”.
Delete All: You can clear the coffer phonebook.
Coffer SMS
Create SMS
You can create new SMS in this menu of
MITO User Manual
75
1,224 English characters.
Inbox
The inbox supports 20pcs SMS. You can see
the received SMS in the inbox.
Reply: You can have a text message reply
to the received SMS.
Edit: You can edit the current SMS and
send it after editing.
Delete: You can delete the current SMS.
Delete All: You can delete all SMS not
locked in the inbox.
Note: In the coffer, to choose the contacts for
SMS sending, you can see only the phonebook
contacts in the coffer.
Tip: When the inbox is full, the new messages
will automatically cover the earliest messages.
Outbox
The outbox supports 10 SMS. If choosing
“Save and Send” to send SMS, you can SMS will
be saved into the coffer outbox. And you can
have such operations as Edit, Send, Delete,
Delete All on the SMS saved in the outbox.
Draftbox
The Coffer SMS Tone Mode lets you
enable/disable the tone for the Coffer SMS.
Coffer Call Log
MITO User Manual
76
It can record the missed calls, received calls
and dialed calls related to the contacts in the
coffer phonebook. Its capacity is 30 records. In
the register list, press the dial key to dial a call.
Tip: When the mobile phone displays the alert
message of the missed calls, press “Read” to
enter the missed call list directly. It is possible to
display false name or number. If false alert
message occurs, press “Read” to display a blank.
Change Coffer Lock
You can change the password, which can be
of 4-8 digits, into the coffer.
Note: You must remember the coffer password in
mind; otherwise, you will be unable to access the
coffer and all data cannot be restored.
Block Incoming Call
To enable/disable a block for all the calls coming
from the contacts in the Coffer.
Password Remind
You can save here your numbers for personal
accounts, passwords, ATM, etc.. Five storage
positions are available.
MITO User Manual
77
8. Maintenance & Safety
Please read and observe the following
information for safe and proper use of your
phone and to prevent damage. Also, keep the
user guide in an accessible place at all the times
after reading it.
Charger and Adapter Safety
Charger and adapter are designed for indoor use
only.
Battery Information and Care
o Please dispose of your battery properly.
o Do not disassemble or short-circuit the
battery.
o Keep the battery’s metal contacts clean.
o Recharge the battery after long periods of
non-use to maximize battery life.
o Battery life will vary due to usage patterns
and environmental conditions.
o The self-protection function of the battery
cuts the power of the phone when its
operation is in an abnormal status. In this
case, remove the battery from the phone,
MITO User Manual
78
reinsert it, and turn the phone on.
General Notice
o Using a damaged battery or placing a
battery in your mouth may cause serious
injury.
o Do not place items containing magnetic
components such as a credit card, phone
card, bank book, or subway ticket near your
phone. The magnetism of the phone may
damage the data stored in the magnetic
strip.
o Talking on your phone for long period of
time may reduce call quality due to heat
generated during use.
o When the phone is not used for a long
period time, store it in a safe place with the
power cord unplugged.
o Using the phone in proximity to receiving
equipment (i.e. TV or Radio) may cause
interference to the phone.
o Do not immerse your phone in water. If this
happens, remove the battery and take it to
Authorized Service Center.
o Do not paint your phone.
o The data saved in your phone might be
MITO User Manual
79
deleted due to careless use, repair of the
phone, or upgrade of the software. Please
backup your important phone numbers.
(Ring tones, text messages, voice messages,
picture, and videos could also be deleted.)
The manufacturer is not liable for damage
due to the loss of data.
o Do not turn your phone on or off when the
phone is close to your ear.
Troubleshooting
Phenomena
Possible Causes
Unable to
switch on
1. Does the battery have
power?
2. Is the battery placed
correctly
SIM failed
1. The SIM card is dirty.
Clean it.
2. Reinstall the SIM card.
3. The SIM card is
damaged. Replace it.
MITO User Manual
80
Poor signals
Check the signal strength icon
on the screen. If the icon
contains 4 bars, it indicates the
signal is the strongest; if below 1
bars, it indicates the signal is
very poor.
Unable to
dial out
1. Maybe you have set Hide
My Caller ID but your
network operator does
not provide this service
for you.
2. Strong interference exists
around you.
3. Maybe you have
activated the call
restriction function.
4. Maybe you have
activated Line 2 but your
network operator does
not provide this service
for you.
MITO User Manual
81
Unable to
charge the
battery
1. The battery may
discharge too much; so it
cannot be charged until
it is connected for certain
time.
2. Its performance has
worsened.
Unable to
register to
the network
1. Too weak signals or
strong interference.
2. SIM card installed
properly? Bad contact or
SIM card damaged? If
the SIM card is broken,
please contact the
network operator to
replace it.
Photos taken
are too dark
1. Check if the too low
photo brightness is set.
2. Check if ambient ray is
too dark.
Photos taken
are too
unclear
1. Check if the object taken
is moving.
2. Check if the mobile
phone shivers slightly
while you press shutter.
MITO User Manual
82
Unable to
access
service
menus.
Maybe the SIM card does not
support service function.
9. Abbreviations
SMS
Short Message Service
EMS
Enhanced Message Service
SIM
Subscriber Identity Module
GSM
Global System for Mobile
Communication
PIN
Personal Identity Number
PUK
PIN Unblocking Key
IMEI
International Mobile Equipment Identity
CB
Cell Broadcast
GPRS
General Packet Radio Service
MMS
Multimedia Message service
Card 1
Host card (card inserted in SIM1 slot)
Card 2
Slave card (card inserted in SIM2 slot)
Loading...