NEXXT SOLUTIONS HASPE610 User Manual

Smart Power Strip

Quick Guide

MODEL NO: NHP-E610

⚫ Product Overview

eco4life Smart Power Strip with Surge Protection has 4 power outlets and 4 USB ports. This product
works seamlessly with your home automation devices through the eco4life app or voice commands with
Amazon Alexa or Google Assistant. It enables wireless control of your lights and devices from anywhere.
It automatically switches individual devices on and off based on multiple timers. Intelligent USB charging
ports can detect your devices and deliver the ideal charging for optimum safety.

⚫ Easy Installation

1.Scan the QR Code or directly download and install the eco4life app from the Apple App Store or
Google Play on your smartphone.
App Download

2. Make sure your smartphone is connected to your home Wi-Fi network.

3. Plug the Smart Power Strip into the wall outlet and wait for the red LED light to blink rapidly.

4. If the red light does not blink rapidly, reset the device by pressing the ON/OFF button in five (5) second

intervals until red light blinks.

5. From the eco4life app, click + on the upper right corner of the screen to add your device. Select
Electrical Outlet and customize settings for your Smart Power Strip. You can rename the individual outlets on
the power strip to identify the device plugged in for easier control.

⚫ ADD DEVICES TO ECO4LIFE APP

1. Open the "eco4life" app, click "+", select "Electrical outlet", then enter the mobile phone is connected
Wi-Fi password configured.

2. Once configured, click on the icon on the upper right corner to customize or restore your settings,
check firmware updates and other tasks.

3. From the "Scenes" page click "+" to add scene. Enter the scene name, then add "condition" to
perform a single or multiple tasks, collectively with your other smart devices. (See picture 1)

4．From Profile Page, select "Device Sharing", share device control with family members ( pic 2)

⚫ Light Indicators

Red Light (Blinking):
Sync mode
Red Light (Steady On):
Successfully paired to wireless network Red Light (Off):
Not connected to wireless network Blue Light (On):
Output ports have power
Blue Light (Off):
Output ports have no power

⚫ Technical Specification

Disconnection means: Type 1B
Pollution degree:2
Rated Impulse voltage: 1500V
Rates Automation action: 6000 cycles
Input: 125V~, 15A, 60Hz, 1875W
USB input: 100-125V~, 50/60Hz, 0.35A
Output: 5V , 3.1A each, 3.1A total
Wireless Type: Wi-Fi 2.4GHz, IEEE 802.11b/g/n

NOTE: This device supports 2.4 GHz Wi-Fi Network only. It is compatible with Android Version 4.4 -8.0
and iOS Version 8 and above. DO NOT overload capacity.

CAUTION:
Risk of electric shock; Dry location use only, Used indoor only.
Contains Always On Receptacles. To Reduce the Risk of Electric Shock -Disconnect power strip from
power source before servicing any equipment connected to the power strip