Nextbook Ares 7 Getting Started

Accessories

USB Cable AC/DC Adaptor

Buttons & Ports

Step by Step to Get Started

STEP 1 Charge the Battery

Connect the DC adaptor to Micro-USB port of the unit through the USB cable, and then insert
the DC adaptor to a standard socket.

Note:

y It takes about 3 hours to fully charge the battery. The charge indicator should light up in orange once the

battery is fully charged.

y Charging through USB connection with computer is extremely slow and may take a few more hours. Yo u ar e

strongly recommended to charge with the provided power adaptor.

7” Capacitive Touch Android Tablet

Quick Start Guide

NXA7QC132

Ver.1.0

1. Earphone socket – Connects to stereo earphones.

2. Microphone

3. Charging indicator– Lights red during charging, and lights orange as

charging completes.

4. Front Camera Lens

5. Micro USB Port – Connects to PC via USB cable.

6. Power –Briefly press to lock or unlock the screen; press and hold to turn on/off

the unit; press and hold down for ten seconds to reset the device.

7. VOL+/- – Increase/ decrease the volume.

8. Tou ch s cree n

9. Micro SD card Slot

10. Built-in Speakers

1

STEP 2 Transfer files

STEP 3 Turn on the Unit

Press and hold the Power button of the unit until you see the startup screen.

Tip: To turn off the device, press and hold the Power button, then select “Power Off”.
Note: The device may sleep with the screen off when there is no action for a while (depending on the Screen
Timeout setting). When the device sleeps, you can briefly press the Power button to wake it up.

STEP 4 Make WIFI connection

Home Screen

Add an Item

T

ap to display applications

and then hold
your tap on an item and place it to the home
screen.

a. Battery level
b. Time
c. Google search bar
d. Application tab
e. Application kits
f. Return button
g. Home button- Go to Home screen
h. Recent opened apps

ab c f g

h

d

1. Tap t h e
application
icon.

2. Tap t h e
Setting icon.

3. Slide rightwards
to turn on Wi

-Fi.

e

(1) Connect the tablet to a computer with the

supplied USB cable;

(2) The system may require installation of the USB

driver if necessary;;

(3) The device will be identified and opened as an

MTP device, its icon looks like a cell phone;
(4) Open the drive and copy files from the PC to it;
(5) Disconnect the USB cable once the file

transference is completed.

2