Nexo NXDT104MK2 Datasheet

NXAMP Digital Audio Input Extension Cards

NXAMPs can be fitted with EtherSoundTM, DanteTMor AES/EBU network cards.

AES/EBU

NXES104

EtherSoundTMNetwork Card

Key Features

• Extracts 4 audio streams (24 bits / 48 KHz)
among the 2 x 64 channels of a ES100
EthersoundTMstream.

• IN and OUT port for simple daisy chain
without any need for an external switch.

• 3rd Ethernet port for remote control of the
whole network from any NXES104 card
and ASIO streaming.

Specifications -

NXES104 NXDT104

AES/EBU and Remote Control Card

NXAE104

Key Features

• Receives 4 audio channels (24 bits / 44.1
– 96 kHz) in AES/EBU format.

• 2 x AES/EBU stereo input on XLR, one with
AES/EBU buffered output on XLR with fail
safe relay.

• 2 x switched RJ45 for remote control and
daisy chain of the devices.

NXAE104

DIGITAL AUDIO FORMAT

Digital audio type Ethersound networks AES/EBU DanteTMnetworks
Media type Dedicated Ethernet 100 Mb network 110 Ohms 3 wires twisted pair with XLR Standard TCP/IP over Ethernet network,

connector minimum 100 Mb, recommended 1 Gb
Number of channels 4 channels from network to NXAMP 4 4 channels from network to NXAMP
Resolution / Sample Rate 24 bits / 48 KHz 24 bits / 44.1 - 96 KHz 24 bits / 48 KHz
Latency 0.10 ms 1.4 ms to 2.4 ms 0.15 ms to 5.0 ms (typical 1 ms)

REMOTE CONTROL FORMAT

Network format Embeded in the Ethersound frame Standard TCP/IP Standard TCP/IP
Device addressing Automatic, based on Mac address Automatic, based on IP address with Zeroconf Automatic, based on IP address with Zeroconf

FRONT PANEL FEATURES

Digital audio connectors 2 shielded Neutrik Ethercon 2 x XLR-F and 1 x XLR-M 2 shielded Neutrik Ethercon
Additional port RJ45 for additional remote control 2 x RJ45 for remote control RJ45 for additional remote control
LEDs on digital audio ports Tx and Rx on each port None Link/Act and Speed on each port
LEDs on remote port Link and activity Link and Activity Link and activity

GENERAL SPECIFICATIONS

Power supply + 3.3 Volts, 5 W from NEXO slot +3.3 Volts, 2 W from NEXO slot + 3.3 Volts, 7 W from NEXO slot
Dimensions (W x D x H) 120 x 160 x 40 mm (NXAMP slot) 120 x 160 x 40 mm (NXAMP slot) 120 x 160 x 40 mm (NXAMP slot)
Weight 160 g 200 g 200 g
EMC certification CE, FCC, ICES CE, FCC CE, FCC, ICES
Green Status ROHS and REACH ROHS and REACH ROHS and REACH

NXDT104

DanteTMNetwork Card

Key Features

• Receives 4 audio streams (24 bits / 48
KHz) in DanteTMformat.

• Remote control from any computer on a
local area network using TCP/IP
commands.

• Unique 3-port design can be used:

- As an integrated 3 port gigabit switch

- As two Dante™ redundant port plus an

optional 3rd port for additional remote
control

7