NewStar NMPRO-WMB2 operation manual
NMPRO-WMB4
NMPRO-WMB3
NMPRO-WMB2
This instruction is applicable to all the following
models and related extended products
2
Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before
attempting to begin your installation.
This products should only be installed by someone who has a basic knowledge of building constructio
installations and fully undestnd these instrudtions.
Always have someone assit you to lift and position your equipment.
Tighten screws and bolts firmly, but do not over tighten. Over tightening can damage the item and greatly
reduce their ability to hold.Please refer to suggested torque values where applicable in these instructions.
Tilt arms
Tilt arms
Tilt arms
Parts list (NMPRO-WMB2)
M5X15 M6X15 M8X15 Ø6XØ6.2X1.5
X4 X4 X4
X2 X8 X2 X21000mm*1+480mm*2
X4
A1
D1 D2 D3 D4 D5
A2 A3 A4
X2
Stud Finder
Socket Set Pencil
Level
Drill Hammer
Required Tools
Phillips Screwdriver Measuring Tape
Wood Bit
32
"
7
Masonry Bit
8
"
3
M8X12 M8 Lag bolt Lag boltØ6XØ8.2X1.5
X6X4 X4 X2 X2
X2
B1 B2 B3 B4 B5
3mm 5mm
X1
X1
B6
M8X12 M8 Lag bolt Lag boltØ6XØ8.2X1.5
X6X4 X4 X2 X2
X3
B1 B2 B3 B4 B5
3mm 5mm
X1
X1
B6
M8X12 M8 Lag bolt Lag boltØ6XØ8.2X1.5
X6X4 X4 X2 X2
X4
B1 B2 B3 B4 B5
3mm 5mm
X1
X1
B6
Parts list (NMPRO-WMB3)
M5X15 M6X15 M8X15 Ø6XØ6.2X1.5
X4 X4 X4
X3 X12 X2 X31000mm*3+480mm*1
X4
A1
D1 D2 D3 D4 D5
A2 A3 A4
X3
Parts list (NMPRO-WMB4)
M5X15 M6X15 M8X15
Ø6XØ6.2X1.5
X4 X4 X4
X4 X16 X2 X41000mm*4+480mm*1
X4
A1
D1 D2 D3 D4 D5
A2 A3 A4
X4
3
Loading...