New Holland 260, 258, 256, 57 User Manual

New Holland Rolabar Rake Specifications

57 256 258 260

MODEL 57 256 258 260

aking width, ft. in. (mm) 8'6" (2591) 8’6” (2591) 9’6” (2896) 9’6” (2896)

R Width overall, ft. in. (mm) 10'3" (3124) 10'3" (3124) 11' (3353) 11' (3353) Height overall, ft. in. (mm) 3'4" (1016) 4'4" (1321) 4'4" (1321) 4'4" (1321) Length overall, ft. in. (mm) 6'5" (1956) 10'1" (3073) 10'1" (3073) 10'1" (3073) Wheel Tread, ft. in. (mm) 5'5" (1651) 5'6" (1676) 5'6" (1676) 5'6" (1676) Transport Speed, mph (km/h) Tractor Speed 20 (32) 20 (32) 20 (32) Operating Speed, mph (km/h) 2 to 8 (3 to 13) 2 to 7 (3 to 11) 2 to 7 (3 to 11) 2 to 7 (3 to 11)

Weight, approx., lbs. (kg) 777 (352) 790 (358) less tires 850 (386) less tires 885 (401) less tires

Main frame, in. (mm) 3 (76) channel, cross-braced .......................4 (102) channel, cross-braced with heavy tubular members ........................

with heavy tubular members

Basket — ..........................................One piece; welded heavy steel angle...........................................

Gearbox(ground drive) None ...........Heat-treated gears and clutch running in grease on tapered roller bearings ............

Drive Housing Special accuracy shaft running None None None

on tapered roller bearings

Tine bars ......................5, standard high carbon...................... .....................5, extra-heavy high carbon

Tines ...................................................Steel or rubber-mounted .............................................. Rubber-mounted

Number of tines 90 90 100 or 155 100 or 155 Tine Bar Bearings Single ball bearing Single ball bearing Double ball bearing Double ball bearing Drive PTO Ground Ground or hydraulic Ground or hydraulic Delivery Left-hand Left-hand Left-hand Right-hand

............On hydraulic models-2 to 10 (3 to 16)..............

Only rubber-mounted available on hydraulic models

COMPLETING PACKAGES AND OPTIONS:

Hitch and jack Dolly wheels

5.00 x 15 wheels/tires 27 x 9.50-15 Rib implement tires 15” wheels only Flow control kit for single hydraulic rake Dual wheel attachment Stripper bar support Wide tire adapter Safety chain and hardware

Page 1 of 2

New Holland Rolabar Rake Specifications

216 252

MODEL 216 UNITIZED RAKE

verall height, ft. in. (mm) 5'4" (1626)

O Overall width (transport), ft. (mm) 10 (3045) Overall length (transport), ft. in. (mm) 22'1" (6730) Weight, approximate, lbs. (kg) 3005 (1363) Raking width

-each basket, ft. in. (mm) 10'6" (3198)

-maximum, both baskets, ft. (mm) Up to 27 (8223) Tire sizes 11L x 15 rib implement Operating speed, mph (kph) 2 to 10 (3 to 16) Transport speed, mph (kph) 20 (32) Main frame Tubular steel construction Basket One-piece, welded construction Tines Rubber mounted, 220 standard, 340 optional Tine bar bearings Double ball Tine ground clearance, in. (mm) 8 to 11 (203 to 279) Tractor requirement 9 gpm hydraulic flow with 2000 psi relief, four remote outlets,double circuit

OPTIONS:

Front gauge wheel kit Rear gauge wheel kit High-density rubber 120 tine package Safety tow chain bundle Safety chain hardware kit

RAKE HITCHES MODEL 252 PIVOT-TONGUE RAKE HITCH

Weight, lbs. (kg) 735 (333) with wheels Length, ft. in. (mm) 17'5" (5305) Maximum operating width (with two 9 1/2-foot rakes), ft. (mm) 24 (7310) Transport width, ft. in. (mm) 8'11" (2716) Hitch Clevis type Frame Rectangular steel tubing Rake Models Two “256” rakes

Two “258” rakes One “258” and one “260” rake Ground or hydraulic drive

Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).

Design, materia ls a nd/or specifications are subje ct t o chan ge wit hout noti ce and wit hout l iabil ity th erefo r. Specificat ions are applicable to un its sold in Ca nada, the United Stat es, its territ ories and possess ions, and may var y outside the se areas.

Safety begins with a thorough understanding of

the equipment. Always make sure you and

your operators read the Operator’s Manual

before using the equipment. Pay close

attention to all safety and operating

decals and never operate machinery

without all shields, protective devices

and structures in place.

Page 2 of 2