New Age 96058 User Manual
Phone:800-255-0104
Fax: 877-877-7687
www.newageindustrial.com
sales@newageindustrial.com
New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.
JOB:
ITEM:
QTY:
Wide- Angle Racks
Specifically designed for 18” x 26” and 12” x 20” pans or trays.
“Mix & Match” Pan Size
Extremely versatile, this multipurpose rack is
designed to transport 18‖ x 26‖ and 12‖ x 20‖ pans
or trays. Extra wide 3 1/4‖ angles are welded to
the heavy duty frame giving you the freedom to
mix–and–match pans and trays of both sizes
on one rack.
“Worry Free” Handling
Specially designed to hold trays by the bottom
insuring equal load distribution for easy, ―worry
free‖ handling. Heavy duty aluminum tube and
angle slides maximize strength and durability.
Easy to Maneuver
Equipped with four 5‖ heavy duty platform type
casters, these all welded aluminum racks are built
to be pushed around. Non-marking wheels
protect floors and minimize noise.
Guaranteed To Last
Guaranteed to last, each rack carries a Lifetime
Guarantee against rust and corrosion as well as
a Five-Year Guarantee against material defects
and workmanship.
Model #1305
Phone:800-255-0104
Fax: 877-877-7687
www.newageindustrial.com
sales@newageindustrial.com
New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.
SPECIFICATIONS
MATERIAL: Hi-tensile, corrosion
resistant, rust proof, primary
extruded
aluminum, Type 6463-T5 alloy.
CONSTRUCTION: All heli-arc
welded with all seams welded and
sealed (no rivets).
SIDES: Each side had two vertical
posts of 1‖ x 1‖ x .070 wall tube.
Welded to each side are angle
runners of 1 1/2‖ x 3 1/4‖ x .100
wall aluminum angle, spaced on
3‖ or 5‖ centers.
HORIZONTAL SUPPORTS: Each
rack has (4) horizontal supports
located at the top and center.
These supports are 1‖ x 1‖ x .070
wall tube.
CORNER GUSSETS: Gussets of
1 1/2‖ x 1 1/2‖ x 5/8‖ thick angle
are welded to the inside angles
(bottom side) where
horizontal cross bracing meets
vertical uprights.
Note: Each gusset requires 4
1/2” of
weld.
BASE: All welded rectangular
frame with caster plates pretapped for caster bolts welded to
each corner.
CASTERS: Platform type, 5‖
diameter
wheel, full swivel design with
sealed ball bearing axle. Wheel
material is nonmarking
polyurethane.
Model #1305
Model
No.
Size-W
Size-H
Size-D
Runner Spacing
Pan Cap.
Wt.
Accepts 18"x26" or 12"x20" Pans-NSF Certified
1305
20 3/8"
69 3/4"
26"
5"
12
51#
1306
20 3/8'
69 3/4"
26"
3"
20
71#
Accepts 18"x26" or 12"x20" Pans, and Various Oval Trays
96058
26 1/2"
70"
30"
6"
10
99#
97690
51 3/4"
71 5/8"
30"
6"
20
176#
Options:
CASTER LOCKS (2) — Add ―CL‖ suffix to model #.
CORNER BUMPERS (4) — Add ―B‖ suffix to model #.
PAN STOP — Add ―PS‖ suffix to model #.
PERIMETER BUMPER — Add ―PB‖ suffix to model #.
SOLID BASE — Add ―E‖ suffix to model #.
VERTICAL BUMPER (4) — Suffix ―VB‖ suffix to model #.
Loading...