New Age 1330U User Manual
New Age Industrial Corp., Inc.
20 3/8"
PO Box 520 • 16788 US Hwy 36 • Norton, Kansas 67654
Phone: 800-255-0104 • Fax: (877)-877-7687 • www.NewAgeIndustrial.com
“U” Type Nesting Racks
Virtually maintenance free
• All welded construction ensures the maximum
strength and stability of each rack.
• Shipped assembled for immediate use.
• Supporting cross braces have gussets securely
welded into place to prevent “racking”.
“Worry Free” Handling
• Specially designed to support trays by the bottom,
not just the lip, ensuring equal load distribution for
easy, “worry-free” handling.
Job:
Item:
Quantity:
• Heavy duty aluminum tube and angle slides
maximize strength and durability.
Easy to Maneuver
• Equipped with four 5” heavy duty platform type
casters, these all welded aluminum carts are built
to be pushed around.
• Non-marking wheels protect fl oors and minimize
noise.
Sanitary
• All seams are fully welded and sealed providing a
smooth, easy to clean surface.
• No cracks or crevices to trap dirt!
Guaranteed To Last
• Five-Year Guarantee against material defects and
workmanship.
• Lifetime Guarantee against rust and corrosion.
#1330U
6 “U” Racks = 13.8 sq/ft • 6 Standard Racks = 22.4 sq/ft
NSF
®
This information is for general sales and engineering use
only. New Age Industrial reserves the right to modify or
make changes at any time without notice to materials and
specifi cations.
Distributed by:
New Age Industrial Corp., Inc.
69 3/4"
3" TYP.
1 5/8"
26"
18 3/8"
20 3/8"
TOP VIEW
25 5/8"
1/8" SHEET CAP
WELDED (2 PER U)
20 3/8"
PO Box 520 • 16788 US Hwy 36 • Norton, Kansas 67654
Phone: 800-255-0104 • Fax: (877)-877-7687 • www.NewAgeIndustrial.com
“U” Type Nesting Racks
MATERIAL: Hi-tensile, corrosion resistant, rust proof, primary
extruded aluminum, Type 6463-T5 alloy.
CONSTRUCTION: All heli-arc welded with all seams welded and
sealed (no rivets).
SIDES: Each side had two vertical posts of 1” x 1” x .070” wall
tube. Welded to each side are angle runners of 1¼” x 1⅝” x .100”
wall aluminum angle, spaced on 2” or 3” centers.
HORIZONTAL “Z” SUPPORTS: Three 1” x 2” tubes, welded into
a “U” shaped unit.
Job:
Item:
Quantity:
CORNER GUSSETS: Gussets of 1½” x1½” x ⅝” thick angle are
welded to the inside angles (bottom side) where horizontal cross
bracing meets vertical uprights.
Note: Each gusset requires 4-½” of weld.
BASE: A “U” support frame with pre-tapped caster plates welded
to each corner.
CASTERS: Platform type, 5” diameter wheel, full swivel design
with sealed ball bearing axle. Wheel material is non-marking
polyurethane.
NSF
®
NSF Certifi ed.
Model Size Pan Runner Ship
No. W-H-D Cap. Spacing Wt
1331U 20⅜” x 69¾” x 26” 20 3” 70#
1330U 20⅜” x 69¾” x 26” 30 2” 84#
Four 5” platform type casters (#C450).
Designed to accommodate 13" x 18", 14" x 18" and 18" x 26" pans.
OPTIONS:
Caster Locks (2) -- Add “CL(B)” suffi x to model #.
Medical Casters (4) -- Add “MD” suffi x to model #.
Vertical Bumpers (4) -- Add “VB” suffi x to model #.
This information is for general sales and engineering use
only. New Age Industrial reserves the right to modify or
make changes at any time without notice to materials and
specifi cations.
Distributed by:
Loading...