New Age 1290 User Manual

Phone:[phone]

Fax: [phone]

www.newageindustrial.com

[e-mail]

New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.

JOB:
ITEM:
QTY:

1290 Enclosed Pan Racks

Built to Accommodate 18” x26” Sheet pans

Clean, High Volume
Storage Cabinet

Ideal cabinet for food delivery and storage.

Formed door and rear panel create a chimney
effect allowing air to circulate freely from top to
bottom. Solid side panels are composed of
interlocking aluminum extrusions with guides
spaced on 1-½” centers for maximum capacity.

Units are secured with heavy duty tie rods of ¾”

x 1” tube.

Easy to Maneuver

Equipped with four 5” platform swivel type heavy
duty casters with non-marking wheels, these all
welded aluminum carts can be loaded up and
easily rolled into place.

Sanitary

Each unit is all welded with all seams fully
welded and sealed providing a smooth, easy to
clean surface. No cracks or crevices to trap dirt!

Guaranteed Dependable

All units carry a Lifetime Guarantee against
rust and corrosion as well as a Five-Year

Guarantee against material defects and

workmanship.

#1290PP • #1290WDW • #1292

Enclosed Pan Rack

Enclosed Pan Racks are also referred
to as transport carts. Caution must be
used when transporting over the road
to prevent abuse. For this reason, all
models (except for the #1290A) are
reinforced making them more durable
for transporting.

Phone:[phone]

Fax: [phone]

www.newageindustrial.com

[e-mail]

New Age Industrial reserves
the right to modify or make
changes at any time without
notice to materials and
specifications.

APPLICATIONS: General storage and movement of
trays and pans.

CONSTRUCTION: Heavy duty, high tensile, extruded
aluminum. Type 6063-T5 alloy.

UPPER FRAME & TOP: The upper frame is
constructed of vertical uprights 1” x 2-½” x 1/8” thick
extruded aluminum channels with top cross and side
bracing of 1-¼” x 1-¼” x .070 wall extruded aluminum
tubing , all fully welded together. A solid cap of .063
thick aluminum is welded to uprights and cross bracing.

COMPOUND GUIDES: The compound guides are
interlocking solid wall type, extruded aluminum panels.
Each panel has a series of guides spaced 1-½” on

center, with ½” ledges and .090 wall thickness. The

guides are welded to the vertical uprights.
REAR PANEL: Rear panel is .080 thick aluminum

panel with a corrugation on each side for strength and
enhanced air circulation. Panel is welded to the top,
bottom, and rear vertical uprights.

DOOR: Door consists of 1/8” thick aluminum panel with
a corrugation on each side. The door is supported by
three stainless steel hinges designed to provide 270º
door swing. A positive gravity catch is provided to retain
door in a closed position. A universal card holder is
bolted to the upper front of the door.

TIE ROD: A ¾” x 1” x .070 wall extruded aluminum tube

tie rod is welded to the front vertical uprights for extra
rigidity. Model #1291 uses two tie rods, one at each
end.

BOTTOM FRAME: Bottom frame is constructed of 1/8”
thick aluminum sheet with four sides bent down 1-3/8”,
all corners welded smoothly. Tubular framework welded
inside the 1/8” aluminum sheet for extra rigidity. Caster
plates (2-¾” x 4-3/8” thick pre-tapped) are welded to
bottom of frame.

CASTERS: Four platform type 5” casters , full swivel

design with sealed ball bearing axle and non-marking
wheels.

Enclosed Pan Rack

Model Size Pan H.D. Ship
No. W-H-D Casters Cap. Base Wt.
½-SIZE ENCLOSED PAN RACK — 1-½” Runner Spacing

1296 ............. 20-7/8" x 38" x 27-5/8" .....5" (#C450) ..... 20 .......No .....72#

¾-SIZE ENCLOSED PAN RACK — 1-½” Runner Spacing

1293 ............. 20-7/8" x 56" x 27-5/8" .....5" (#C450) ..... 32 ...... Yes ...106#

FULL SIZE ENCLOSED PAN RACK — 1-½” Runner Spacing

1290 ............. 20-7/8" x 68" x 27-5/8" .....5" (#C450) ..... 40 ...... Yes ... 113#

1290A........... 20-7/8" x 68" x 27-5/8" .....5" (#C450) ..... 40 .......No .... 110#

1290WDW ... 20-7/8" x 69" x 27-5/8" .....6" (#C418) ..... 38 ...... Yes ...132#

1292 ............. 20-7/8" x 69" x 27-5/8" .....6" (#C490) ..... 38 ...... Yes ...132#

SOLID SIDES, OPEN ENDS, SOLID TOP & BOTTOM — 1-½” Runner
Spacing

1291 ............. 20-7/8" x 68" x 27-5/8" .....5" (#C450) ..... 40 ...... Yes ....79#

PASS-THRU ENCLOSED PAN RACKS W/ FRONT & REAR DOORS-1-

½” Runner Spacing

1295 ............. 20-7/8" x 68" x 27-5/8" .....5" (#C450) ..... 40 ...... Yes ...125#

STEAM TABLE ENCLOSED PAN RACK

95141…………23 3/4”X68”X27 5/8”……5”(C450)…..20……..

Casters:

#C418 = 6" x 2" K-Urethane platform type swivel caster.
#C450 = 5" x 1-3/8" polyurethane platform type swivel caster.
#C490 = 6" x 2" polyolefin platform type swivel caster.

All Units Must Ship Common Carrier
OPTIONS:

• Corner Bumpers (4) - Add “B” suffix to model #.

• Full Perimeter Bumper - Add “PB” suffix to model #.

• Caster Locks (2) - Add “CL” suffix to model #.

• Open Door Latch - Add “DL” suffix to model #.

• Prison Package - Add “PP” suffix to model # (38 pan capacity).

(4) Stainless Steel Hinges (+) Extra Interior Bracing.
(4) 6" Casters (#C490) (+) Tamper-Proof Screws & Bolts
(2) Padlock Holes In Door