Nevion SFP-TR1-13T-ER User Manual

23034 SFP-TR1-13T-ER

Gigabit Ethernet SFP standard optical 1310nm transceiver

User manual

Rev. A

Nevion

Nordre Kullerød 1
3241 Sandefjord
Norway
Tel: [phone]

nevion.com

23034 SFP-TR1-13T-ER Rev. A

Nevion Europe
P.O. Box 1020

3204 Sandefjord, Norway
Support phone 1: [phone]
Support phone 2: [phone]

Nevion USA

1600 Emerson Avenue

Oxnard, CA 93033, USA

Toll free North America: [phone]

Outside North America: [phone]

E-mail: [e-mail]

See http://www.nevion.com/support/ for service hours for customer support globally.

Rev.

Repl.

Date

Sign

Change description

A -

BA

Initial revision

Nevion Support

Revision history

Current revision of this document is the uppermost in the table below.

nevion.com | 2

23034 SFP-TR1-13T-ER Rev. A

Contents

Revision history ........................................................................................................ 2

1 Product overview ................................................................................................... 4

2 Specifications ........................................................................................................ 5

General environmental requirements for Nevion equipment .................................... 6

Product Warranty...................................................................................................... 7

Appendix A Materials declaration and recycling information .................................... 8

A.1 Materials declaration ..................................................................................................... 8

A.2 Recycling information .................................................................................................... 8

nevion.com | 3

23034 SFP-TR1-13T-ER Rev. A

1 Product overview

SFP-TR1-13T-ER is an optical gigabit Ethernet SFP with one 1310nm optical transmitter and
one optical receiver. –ER stands for Extended Reach with a distance up to 40Km with 9/125
μm SMF fiber. The SFP’s have the ability to report information such as wavelength, signal
presence, received signal level, launch power and internal temperature. This information is
available in some of Nevion’s SFP based products presented through their respective
element management system.

Figure 1: SFP-TR1-13T-ER

nevion.com | 4

23034 SFP-TR1-13T-ER Rev. A

2 Specifications

Power <1.5W
Size SFP compliant, INF-8074i
Control Multicon Gyda control and status
Operating temperature 0 to +70 °C

Supported standards

Gigabit Ethernet 1000BASE-LX/1000BASE-T
100Mbps electrical 100BASE-T
10Mbps electrical 10BASE-T

Optical SDI input

Connector LC/UPC single mode
Wavelength 1260nm to 1600nm
Sensitivity -24dBm
Overload -3dBm

Optical SDI output

Connector LC/UPC single mode
Center wavelength 1310nm +/- 50nm
Extinction ratio min 9dB
Power -2 to +3dBm

nevion.com | 5

23034 SFP-TR1-13T-ER Rev. A

1.

The equipment will meet the guaranteed performance specification under the
following environmental conditions:

-

Operating room temperature
range:

0°C to 70°C

-

Operating relative humidity range:

<95% (non-condensing)

2.

The equipment will operate without damage under the following environmental
conditions:

-

Temperature range:

-40°C to 85°C

-

Relative humidity range:

<95% (non-condensing)

General environmental requirements for Nevion equipment

nevion.com | 6

23034 SFP-TR1-13T-ER Rev. A

Product Warranty

The warranty terms and conditions for the product(s) covered by this manual follow the
General Sales Conditions by Nevion, which are available on the company web site:

www.nevion.com

nevion.com | 7

23034 SFP-TR1-13T-ER Rev. A

組成名稱

Part Name

Toxic or hazardous substances and elements

鉛

Lead

(Pb)

汞

Mercury

(Hg)

镉

Cadmium

(Cd)

六价铬

Hexavalent

Chromium

(Cr(VI))

多溴联苯

Polybrominated

biphenyls

(PBB)

多溴二苯醚

Polybrominated

diphenyl ethers

(PBDE)

SFP-TR1-13T-ER

O O O O O

O

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in SJ/T11363-2006.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used
for this part is above the limit requirement in SJ/T11363-2006.

Appendix A Materials declaration and recycling
information

A.1 Materials declaration

For product sold into China after 1st March 2007, we comply with the “Administrative Measure

on the Control of Pollution by Electronic Information Products”. In the first stage of this
legislation, content of six hazardous materials has to be declared. The table below shows
the required information.

This is indicated by the product marking:

A.2 Recycling information

Nevion provides assistance to customers and recyclers through our web site

http://www.nevion.com/. Please contact Nevion’s Customer Support for assistance with

recycling if this site does not show the information you require.
Where it is not possible to return the product to Nevion or its agents for recycling, the following

general information may be of assistance:

 Before attempting disassembly, ensure the product is completely disconnected from

power and signal connections.

 All major parts are marked or labeled to show their material content.
 Depending on the date of manufacture, this product may contain lead in solder.
 Some circuit boards may contain battery-backed memory devices.

nevion.com | 8