Nevion ETH1000-MKII User Manual

ETH1000-MKII

Gigabit Ethernet Media Converter

User manual

Rev. A

Nevion

Nordre Kullerød 1
3241 Sandefjord
Norway
Tel: [phone]

nevion.com

ETH1000-MKII Rev. A

Nevion Europe

P.O. Box 1020

3204 Sandefjord, Norway
Support phone 1: [phone]
Support phone 2: [phone]

Nevion USA

1600 Emerson Avenue

Oxnard, CA 93033, USA

Toll free North America: [phone]

Outside North America: [phone]

E-mail: [e-mail]

See http://www.nevion.com/support/ for service hours for customer support globally.

Rev.

Repl.

Date

Sign

Change description

A 1 2013-10-11

MS

Updated template. Corrected LED status
information.

1 0 2011-11-29

AJM

Changed wording in chapter 3.1

0 - 2011-06-30

GMW/MS

First version

Nevion Support

Revision history

Current revision of this document is the uppermost in the table below.

nevion.com | 2

ETH1000-MKII Rev. A

Contents

Revision history ........................................................................................................ 2

1 Product overview ................................................................................................... 4

2 Specifications ........................................................................................................ 5

2.1 Optical Characteristics .................................................................................................. 5

2.2 Ethernet ........................................................................................................................ 5

2.3 General ......................................................................................................................... 5

3 Configuration ......................................................................................................... 6

3.1 DIP control .................................................................................................................... 6

3.2 Multicon Gyda control .................................................................................................... 6

3.2.1 Block descriptions ...................................................................................................... 7

4 Connector module ................................................................................................. 8

4.1 Mounting the connector module .................................................................................... 8

4.2 Terminal format support ................................................................................................ 9

5 Module status ...................................................................................................... 10

5.1 Front panel – Status monitoring ...................................................................................10

5.2 GPI Alarm – Module status outputs ..............................................................................11

6 Laser safety precautions ..................................................................................... 12

General environmental requirements for Nevion equipment .................................. 13

Product Warranty.................................................................................................... 14

Appendix A Materials declaration and recycling information .................................. 15

A.1 Materials declaration ....................................................................................................15

A.2 Recycling information ...................................................................................................15

nevion.com | 3

ETH1000-MKII Rev. A

Physical
Interface
Ethernet

Optical transmitter

Optical reciver

Microcontroller

Status LED

DIP switch

Optical

output

Optical

input

Remote

control

10/100/1000Mbps

Twisted pair

Ethernet

1 Product overview

The Flashlink ETH1000-MKII is a 10/100/1000Base-T to 1000Base-X media converter
module. The module converts a 10/100/1000Mbps Ethernet signal on copper to 1000Mbps
optical on fibre suitable for medium haul applications. The module has one electrical
Ethernet port, and one optical fibre transceiver port (receiver fibre connector and transmit
fibre connector). The speed on the electrical connector is dependent of the DIP switch
setting or GYDA control. Speed will upon link connection automatically be set at the highest
possible speed. User can independently enable or disable 10Mbps, 100Mbps or 1000Mbps.
The fibre link can be used in one or two fibre installations, or occupy two wavelengths in a
WDM or CWDM installation.

Figure 1

Figure 2

nevion.com | 4

ETH1000-MKII Rev. A

Transmission circuit fibre:

9/125um Single Mode

Sensitivity

Better than –25dBm

Optical wavelength

1200nm – 1610nm

Detector damage threshold

> +1dBm

Max input power

0dBm

Connector

SC/UPC

Transmission circuit fiber

9/125um Single mode

Light source

F-P / DFB laser

Optical power

13T -5 dBm: -3 to -12dBm, typ -5dBm,

CWDM: +0dBm +/- 1dBm

Optical centre wavelength

1310nm or CWDM

Power

+5V DC/2.9W

Control

Control system for access to setup and module status with
BITE (Built-In Test Equipment)

2 Specifications

2.1 Optical Characteristics

Optical input

Optical Output

2.2 Ethernet

10BaseT/100BaseTx/1000BaseT on RJ-45 connectors. Compliant with IEEE 802.3, IEEE

802.3u, IEEE 802.3ab and IEEE 802.3z. Auto speed sensing and MDI/MDI-X.

2.3 General

nevion.com | 5