Netopia 4652 User Manual
Netopia™ 4652 SDSL/IDSL Router
Getting Started Guide
M
AKING BROADBAND WORK
™
Copyright
©2002 Netopia, Inc., v.053002
All rights reserved. Printed in the U.S.A.
This manual and any associated artwork, software, and product designs are copyrighted with
all rights reserved. Under the copyright laws such materials may not be copied, in whole or
part, without the prior written consent of Netopia, Inc. Under the law, copying includes
translation to another language or format.
Netopia, Inc.
2470 Mariner Square Loop
Alameda, CA 94501-1010
U.S.A.
Part Number
For additional copies of this electronic manual, order Netopia part number 6180029-00-01.
CCCCoooonnnntttteeeennnnttttss
ss
Contents 3
Chapter 1 — Introduction.............................................................5
Overview.......................................................................... 5
Features and Capabilities.................................................. 5
How to Use this Guide....................................................... 6
Chapter 2 — Making the Physical Connections.............................7
Find a Location................................................................. 7
What You Need................................................................. 7
Important Safety Instructions ............................................ 8
Identify the Connectors and Attach the Cables.................... 9
Netopia 4652 SDSL/IDSL Router Status Lights ................ 11
Chapter 3 — Connecting to Your Local Area Network..................13
Readying Computers on Your Local Network...................... 13
Connecting to an Ethernet Network .................................. 14
G
Chapter 4 — Sharing the Connection..........................................17
Configuring TCP/IP on Windows-based Computers............. 17
Dynamic configuration (recommended).................... 18
Static configuration (optional)................................. 19
Configuring TCP/IP on Macintosh Computers .................... 21
Dynamic configuration (recommended).................... 21
Static configuration (optional)................................. 22
Chapter 5 — Console-Based Management..................................25
Connecting through a Telnet Session................................ 26
Configuring Telnet software .................................... 27
Connecting a Console Cable to Your Router ...................... 27
Navigating through the Console Screens........................... 28
Chapter 6 — Easy Setup............................................................29
Easy Setup Console Screens........................................... 29
Accessing the Easy Setup console screens............. 29
Quick Easy Setup Connection Path................................... 31
DSL Line Configuration .......................................... 33
4 User’s Reference Guide
Easy Setup Profile................................................. 35
IP Easy Setup ....................................................... 36
Easy Setup Security Configuration .......................... 38
Appendix A — Technical Specifications and Safety Information ...41
Description..................................................................... 41
Power requirements .............................................. 41
Environment ......................................................... 41
Software and protocols.......................................... 41
Agency Approvals............................................................ 41
Regulatory notices ................................................ 42
Important safety instructions ................................. 43
Limited Warranty and Limitation of Remedies-Revised
January 2002.............................................................................45
Introduction 1-5
CCCChhhhaaaapppptttteeeerrrr 11
IIIInnnnttttrrrroooodddduuuuccccttttiiiioooonn
11
nn
Overview
The Netopia 4652 SDSL/IDSL Router is a full-featured, stand-alone DSL router for connecting diverse local area
networks (LANs) to the Internet and other remote networks. The Netopia 4652 SDSL/IDSL Router uses a high
performance SDSL or IDSL line to provide your whole network with a high-speed connection to the outside
world.
This section covers the following topics:
“Features and Capabilities” on page 1-5
■
■
“How to Use this Guide” on page 1-6
Features and Capabilities
The Netopia 4652 SDSL/IDSL Router provides the following features:
SDSL/IDSL WAN interface supports symmetric data rates from 144 kbps to 2.32 Mbps
■
■
Interoperable with a wide array of DSLAM equipment
■
Support for Ethernet LANs with multiple Ethernet IP subnets
Four 10/100-Base T Ethernet ports connect easily to an existing LAN. An integrated 4-port 10/100BaseT
■
Ethernet switch delivers speed and performance for connected workstations, servers, or existing LAN
environments
■
IP routing for Internet and Intranet connectivity
NAT/NATP, multi-NAT, and DHCP for security and convenience
■
Built-in VPN acceleration delivers wire-speed VPN performance
■
■
Built-in firewall protects LAN resources from Internet intruders
■
Support for Console-based management
Console-based Telnet client
■
■
UNIX syslog client
■
Status lights (LEDs) for easy monitoring and troubleshooting
Wall-mountable, Bookshelf (Side-stackable), or Desktop-stackable design for efficient space usage
■
1-6 Getting Started Guide
How to Use this Guide
In addition to the documentation contained in the accompanying
to get you up and running and connected to your local area network and the Internet. It is intended to be viewed
on-line, using the powerful features of the Adobe Acrobat Reader. The information display has been deliberately
designed to present the maximum information in the minimum space on your screen. You can keep this
document open while you perform any of the procedures described, and find useful information about the
procedure you are performing.
You can also print out all of the manual, or individual sections, if you prefer to work from hard copy rather than
on-line documentation. The pages are formatted to print on standard 8 1/2 by 11 inch paper. We recommend
that you print on 3-hole punched paper, so that you can put the pages in a binder for future reference.
This guide is organized into chapters describing the Netopia 4652’s advanced features. You may want to read
each chapter’s introductory section to familiarize yourself with the various features available.
Use the guide’s table of contents and index to locate informational topics.
Firmware User’s Guide
, this guide is designed
Making the Physical Connections 2-7
CCCChhhhaaaapppptttteeeerrrr 22
MMMMaaaakkkkiiiinnnngggg tttthhhheeee PPPPhhhhyyyyssssiiiiccccaaaallll CCCCoooonnnnnnnneeeeccccttttiiiioooonnnnss
22
ss
This section tells you how to make the physical connections to your Netopia 4652 SDSL/IDSL Router. This
section covers the following topics:
■
“Find a Location” on page 2-7
■
“What You Need” on page 2-7
“Identify the Connectors and Attach the Cables” on page 2-9
■
■
“Netopia 4652 SDSL/IDSL Router Status Lights” on page 2-11
Find a Location
When choosing a location for the Netopia SDSL/IDSL Router, consider:
■
Available space and ease of installation
Physical layout of the building and how to best use the physical space available for connecting your Netopia
■
SDSL/IDSL Router to the LAN
■
Available wiring and jacks
■
Distance from the point of installation to the next device (length of cable or wall wiring)
Ease of access to the front of the unit for configuration and monitoring
■
Ease of access to the back of the unit for checking and changing cables
■
■
Cable length and network size limitations when expanding networks
For small networks, install the Netopia 4652 near one of the LANs. For large networks, you can install the
Netopia 4652 in a wiring closet or a central network administration site.
What You Need
Locate all items that you need for the installation.
Included in your router package are:
The Netopia 4652 SDSL/IDSL Router
■
A power adapter and cord with a mini-DIN8 connector
■
■
One Category 5 Ethernet cable
■
One Category 5 DSL WAN (or Line) cable
A DB-9 to DB-9 console cable
■
■
The Netopia CD containing software and documentation
2-8 Getting Started Guide
You will need:
■
A Windows–based PC or a Macintosh computer with Ethernet connectivity for configuring the Netopia 4652.
This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See “Sharing the
Connection” on page 4-17.
A DSL wall outlet wired for a connection to a telephone carrier who supports Symmetric Digital Subscriber
■
Line (SDSL) or ISDN DSL (IDSL) connections.
Important Safety Instructions
CAUTION: Depending on the power supply provided with the product, either the direct plug-in power supply
blades, power supply cord plug or the appliance coupler serves as the main power disconnect. It is
important that the direct plug-in power supply, socket-outlet or appliance coupler be located so it is readily
accessible.
CAUTION (North America Only): For use only with a CSA Certified or UL Listed Limited Power Source or
Class 2 power supply, rated 12Vdc, 1.5A.
CAUTION (Europe Only): For use only with a GS approved Limited Power Source, rated 12Vdc, 1.5A.
TELECOMMUNICATION INSTALLATION CAUTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry
tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote
risk of electrical shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
Making the Physical Connections 2-9
Identify the Connectors and Attach the Cables
Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
The figure below displays the back of the Netopia 4652 SDSL/IDSL Router.
Connect your computer, DSL
line, and power source as
shown.
1. For a direct computer to
router Ethernet connection,
use the standard Ethernet
cable included with your
router.
2. Use the supplied DSL line
cable to connect the router
to your DSL wall outlet.
3. Connect the supplied
power brick to a power outlet
and the mini-DIN8 connector
end to the router.
1 Computer
1 Ethernet
3
Power
2 DSL
DSL
Ethernet
Power
1 Netopia Router
2-10 Getting Started Guide
Netopia 4652 back panel
DSL
4321
Ethernet
Console Power
DSL port Ethernet ports Console port Power port
.
Port Description
DSL port An RJ-48 jack labeled DSL for your SDSL or IDSL connection. The Netopia 4652
supports connections to either SDSL or IDSL lines.
Ethernet ports Four RJ-45 10/100Base-T Ethernet jacks. Y ou will use any one of these to configure the
Netopia 4652. For a new installation, use an Ethernet connection. Alternatively, you can
use the console connection to run console-based management using a direct serial
connection. You can either connect your computer directly to an Ethernet port using the
supplied Category 5 Ethernet cable, or connect both your computer and the Netopia
4652 to an existing LAN environment. All of the ports are auto-sensing, eliminating the
need for crossover cables.
Console port A DB-9 console port for a direct serial connection to the console screens. You can use
this if you are an experienced user. See “Connecting a Console Cable to Your Router” on
page 5-27.
Power port A mini-DIN8 power adapter cable connection.
1. Connect the mini-DIN8 connector from the power adapter to the power port, and plug the other end into an
electrical outlet.
2. Connect one end of the Category 5 cable to the DSL port, and the other end to your DSL wall outlet.
3. Connect the Ethernet cable to an Ethernet port on the router and the other end to your computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the DSL cable connected between the router and the DSL wall outlet.
Netopia 4652 SDSL/IDSL Router Status Lights
The figure below represents the Netopia 4652 status light (LED) panel.
Netopia 4652 LED front panel
Making the Physical Connections 2-11
POWER
ALERT
IDSL
SDSL
P1P2P3
ETHERNET
P4
The following table summarizes the meaning of the various LED states and colors:
When this happens... the LEDs...
The power is on
The Router detects an error
The WAN is training
The WAN has trained
An Ethernet port is connected to an Ethernet link partner
Power
is green.
Alert
is red.
SDSL
or
IDSL
SDSL
or
IDSL
P1, P2, P3
flashes green.
is green.
, or
P4 Ethernet
device
An Ethernet port has traffic
Note:
The remaining LEDs are not used.
P1, P2, P3
, or
P4 Ethernet
is solid green.
flashes green.
2-12 Getting Started Guide
Connecting to Your Local Area Network 3-13
CCCChhhhaaaapppptttteeeerrrr 33
CCCCoooonnnnnnnneeeeccccttttiiiinnnngggg ttttoooo YYYYoooouuuurrrr LLLLooooccccaaaallll AAAArrrreeeeaaaa NNNNeeeettttwwwwoooorrrrkk
This chapter describes how to physically connect the Netopia 4652 to your local area network (LAN). Before you
proceed, make sure the Netopia 4652 is properly configured. You can customize the router’s configuration for
your particular LAN requirements using console-based management (see “Console-Based Management” on
page 5-25).
This section covers the following topics:
“Readying Computers on Your Local Network” on page 3-13
■
“Connecting to an Ethernet Network” on page 3-14
■
33
kk
Readying Computers on Your Local Network
PC and Macintosh computers must have certain components installed before they can communicate through
the Netopia 4652. The following illustration shows the minimal requirements for a typical PC or Macintosh
computer.
Application software
TCP/IP stack
Ethernet Driver
Your PC
or Macintosh
computer
To the Netopia 4652
Application software:
newsgroups, etc. These applications may require some configuration. Examples include the Eudora e-mail client
and the Web browsers Microsoft Internet Explorer and Netscape Navigator.
TCP/IP stack:
protocols. TCP/IP stacks must be configured with some of the same information you used to configure the
Netopia 4652. There are a number of TCP/IP stacks available for PC computers. Windows 95 includes a built-in
TCP/IP stack. Macintosh computers use either MacTCP or Open Transport. See “Configuring TCP/IP on
Windows-based Computers” on page 4-17. Macintosh computers use either MacTCP or Open Transport. See
“Configuring TCP/IP on Macintosh Computers” on page 4-21.
Ethernet:
the LAN.
Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on
This is the software you use to send e-mail, browse the World Wide Web, read
This is the software that lets your PC or Macintosh computer communicate using Internet
3-14 Getting Started Guide
Once the Netopia 4652 is properly configured and connected to your LAN, PC and Macintosh computers that
have their required components in place will be able to connect to the Internet or other remote IP networks.
Connecting to an Ethernet Network
You can connect a standard 10/100Base-T Ethernet network to the Netopia 4652 using any of its available
Ethernet ports.
Netopia 4652 back panel
DSL
4321
Ethernet
Ethernet ports
The Netopia 4652 in a 10/100Base-T network
To connect your 10/100Base-T network to the
Netopia 4652 through the Ethernet ports, use
standard Category 5 Ethernet cables with RJ-45
connectors.
Console Power
Loading...