Netopia
®
4-Port ADSL Router
MMMMooooddddeeeellllssss::
::
Netopia® 3346(EU, DE)-ENT / 3356(EU, DE)-ENT ADSL Routers – All Models
Quickstart Guide
Unpack your Gateway, check your package contents, and decide on a location :
• Place the Gateway in a spot that is easily accessible for you. You can lay it flat or
mount on the wall.
• Keep the cables away from other electrical devices that may interfere with the operation of your Gateway.
If you don’t have everything, contact your supplier immediately.
1.
After unpacking your Netopia Router shipping carton, decide where you want
to locate the Router.
You should install the Router near your PC or another location that permits easy access
and visibility. You can lay the Netopia Router flat or mount it on a wall. Make sure any
Ethernet cables are kept away from power cords, fluorescent lighting fixtures, and
other sources of electrical interference. Put the Router in a location where air can circulate freely around it.
2.
Connect the power transformer to the power jack on the Router back panel.
Plug the power transformer into an appropriate electrical outlet.
Turn on the power with the power switch. The Power light should come on solid green.
3.
Connect the Router to the wall jack that supports your DSL service.
Insert one end of the lavender telephone cable in the DSL port on the Router back
panel until you feel it lock. Insert the other end of the telephone cable into the telephone jack connected to your ADSL service. The DSL SYNC indicator light should
blink for up to two minutes and then come on solid green.
4.
Connect the Router to create your Ethernet local area network (LAN.)
Connect the yellow Ethernet cable to your first PC and to the Router.
The LAN indicator light should come on solid green for the port where you connected
your Ethernet cable.
Connect each computer or other device to a switch port on the back of the Router with
an Ethernet cable (maximum length 100 meters). If you need more than four ports, connect a hub or switch to the Router using a standard Ethernet cable.
When all of your connections are made, the status LEDs on the front of your Netopia Router
will light, according to the following diagram:
The following instructions assume that you want to use the automatic configuration and
address sharing features of the Router to provide IP information to devices on your local
Ethernet network.
1.
Configure your computer to use an IP address on the same TCP/IP network as
the Netopia Router.
• Windows 95/98 or Windows ME:
• Right-Click on the NNNNeeeettttwwwwoooorrrrkkkk NNNNeeeeiiiigggghhhhbbbboooorrrrhhhhoooooooodd
dd
icon on your Windows desktop and
select PPPPrrrrooooppppeeeerrrrttttiiiieeeess
ss
from the pull-down menu.
• In the list of network components, highlight the entry that says
“ TTTTCCCCPPPP////IIIIPPPP (((([[[[yyyyoooouuuurrrr EEEEtttthhhheeeerrrrnnnneeeetttt ccccaaaarrrrdd
dd hhhheeeerrrreeee]]]]))))
”.
• Click the PPPPrrrrooooppppeeeerrrrttttiiiieeeess
ss
button.
• Click the OOOObbbbttttaaaaiiiinnnn aaaannnn IIIIPPPP aaaaddddddddrrrreeeessssssss aaaauuuuttttoooommmmaa
aattttiiiiccccaaaallllllllyyyy
radio button. Click the DNS Con-
figuration tab. Click the DDDDiiiissssaaaabbbblllleeee DDDDNNNNSS
SS
radio button. Click the Gateway tab and remove
any installed Gateways. Click the OOOOKK
KK
button twice. When prompted, restart your PC.
• Proceed to the next section “Configure Your Netopia Router” .
• Windows 2000 and XP
• Right-Click on the MMMMyyyy NNNNeeeettttwwwwoooorrrrkkkk PPPPllllaaaacccceeeess
ss
icon on your Windows desktop and select
PPPPrrrrooooppppeeeerrrrttttiiiieeeess
ss
.
• Select your LLLLooooccccaaaallll AAAArrrreeeeaaaa CCCCoooonnnnnnnneeeeccccttttiiiioooonn
nn
.
• Right click on your LLLLooooccccaaaallll AAAArrrreeeeaaaa CCCCoooonnnnnnnneeeeccccttttiiiioooonn
nn
and select PPPPrrrrooooppppeeeerrrrttttiiiieeeess
ss
.
• Select IIIInnnntttteeeerrrrnnnneeeetttt PPPPrrrroooottttooooccccoooollll [[[[TTTTCCCCPPPP////IIIIPPPP]]
]]
.
• Click the PPPPrrrrooooppppeeeerrrrttttiiiieeeess
ss
button.
• Click the OOOObbbbttttaaaaiiiinnnn IIIIPPPP aaaaddddddddrrrreeeessssssss aaaauuuuttttoooommmmaaaattttiiiicc
ccaaaallllllllyyyy
radio button and the OOOObbbbttttaaaaiiiinnnn DDDDNNNNSSSS
sssseeeerrrrvvvveeeerrrr aaaaddddddddrrrreeeessssssss a
aaauuuuttttoooommmmaaaattttiiiiccccaaaallllllllyy
yy
radio button. Click the OOOOKK
KK
button.
• Proceed to the next section “Configure Your Netopia Router” .
Checklist