Netopia
®
3-D Reach
™
Wi-Fi Gateways
MMMMooooddddeeeellllssss::
::
••••
Netopia® 3300-Series ADSL 3-D Reach™ Wi-Fi Gateways
••••
Netopia® 3300-Series Broadband 3-D Reach™ Wi-Fi Gateways
Quickstart Guide
Unpack your Gateway, check your package contents, and decide on a location. Consider:
• Place the Gateway in a spot that is easily accessible for you. You can lay it flat or mount
on the wall.
• Keep the cables away from other electrical devices that may interfere with the operation
of your Gateway.
If you don’t have everything, contact your supplier immediately.
Note: Note the serial number ( SN: ) of your Gateway. It is located on the label on the bottom of
the Gateway below the model number. You will need the Gateway’s serial number when installing
wireless card(s) or adapters, or if you need to call for technical support.
The Netopia Installation Wizard automates several tasks to get you up and running easily.
You can run the Wizard on every WWWWiiiinnnnddddoooowwwwssss----bbbbaaaasssseeeedddd PPPPCC
CC
that will connect to your network,
whether it is connected via Wireless, USB, or by Ethernet cable.
>>>>BBBBeeee ssssuuuurrrreeee ttttoooo ddddiiiissssaaaabbbblllleeee ffffiiiirrrreeeewwwwaaaallllllll pppprrrroooodddduuuuccccttttssss ssssuuuucccchhhh aaaassss NNNNoooorrrrttttoooonnnn PPPPeeeerrrrssssoooonnnnaaaallll FFFFiiiirrrreeeewwwwaaaallllllll oooorrrr
MMMMccccAAAAffffeeeeeeee PPPPeeeerrrrssssoooonnnnaaaallll FFFFiiiirrrreeeewwwwaaaallllllll bbbbeeeeffffoooorrrreeee rrrruuuunnnnnnnniiiinnnngggg tttthhhheeee wwwwiiiizzzzaaaarrrrdddd....<<
<<
1.
IIIInnnnsssseeeerrrrtttt tttthhhheeee CCCCDDDD iiiinnnnttttoooo yyyyoooouuuurrrr CCCCDDDDR
RRROOOOMMMM ddddrrrriiiivvvveeee....
The Installation Wizard will run
automatically and step through your connection installation(s).
2.
When prompted, connect a PC to any of the Ethernet “LAN” ports using the
Yellow RJ-45 Ethernet cable. Use additional standard Category 5 Ethernet cables
(not supplied) to connect up to four devices.
3.
If you are installing a Netopia 3-D Reach Wireless card, use the Netopia
Installation Wizard on your laptop or PC. If you are using third-party,
non-Netopia-supplied wireless adapters with your Gateway use the drivers/CD
that are compatible for that wireless adapter.
When all of your connections are made, your network may look like this:
When all of your connections are made, the status LEDs on the front of your Netopia Gateway
will light, according to the following diagram:
Checklist
Use the Netopia Installation Wizard
The Welcome screen lists the tasks that
you can perform with the Netopia Installation Wizard.
The second screen lets you choose which
type of Netopia device you are installing,
and where you are installing it.
Once you make your choice, subsequent
screens will install the appropriate drivers,
if required, and perform configuration
tasks, depending on the type of device you
are installing.
Follow the on-screen instructions.
1 2 3
B
ROADBAND
WITHOUT
B
OUNDARIES
™
Rear View
Modem Port
(Ethernet models)
DSL Port
(DSL models)
DSL or Cable
Modem
1
Ethernet
Port s
Modem
3
LAN
4
2
1
1
For Ethernet models, connect to DSL or Cable modem;
For DSL models, connect directly to DSL wall outlet
Power
Off / On
Power Switch
DC Power
Front View
Netopia Gateway
CD & Quickstart Guide
-or-
Lavender RJ-11
Telephone Cable
Power
Supply
or
Gray RJ-45
Modem Cable
Yellow RJ-45
Ethernet
Cable
Modem
Wireless -
Flashes green when there is
activity on the wireless LAN.
Ethernet 1, 2, 3, 4 - Modem (Ethernet models) -
Solid green when connected.
Flash green when there is
activity on the LAN.
Solid green when connected.
Flashes green for activity
on the modem port.
– OR –
DSL Sync (DSL models) -
Flashes green when training
Solid green when trained
Power -
Green when power is on.
When you use the Netopia Installation Wizard, it will automatically run your Web browser at
the appropriate time, and take you to your Gateway’s Web page. If it fails to do this, you can
access the configuration pages at any time as follows:
1.
Run a Web browser, such as Netscape Navigator or Microsoft Internet
Explorer, and enter
http://192.168.1.254
in the URL Address text box.
Click GGGGoo
oo
.
The Gateway displays the WWWWeeeellllccccoooommmmee
ee
page.
2.
Create a new security password that you will use to access the Gateway.
The new password will take effect when you click SSSSuuuubbbbmmmmiiiitt
tt
. Then, when you log into the
Gateway again, use the username aaaaddddmmmmiiiinn
nn
, and the password that you just created.
Log in to the Gateway by typing the username aaaaddddmmmmiiiinn
nn
and the password you just cre-
ated.
Ethernet Models:
CCCCoooonnnnggggrrrraaaattttuuuullllaaaattttiiiioooonnnnssss!!
!!
Your connection is up and running and you should be able to browse the
Internet.
DSL Models:
There is just one more step for a DSL connection:
3.
The Gateway displays the Quickstart page.
Enter the IIIISSSSPPPP UUUUsssseeeerrrrnnnnaaaammmmee
ee
(example: jsurfer@isp.net ) and IIIISSSSPPPP PPPPaaaasssssssswwwwoooorrrrdd
dd
supplied by
your Internet Service Provider.
Click CCCCoooonnnnnnnneeeecccctttt ttttoooo tttthhhheeee IIIInnnntttteeeerrrrnnnneeeett
tt
.
CCCCoooonnnnggggrrrraaaattttuuuullllaaaattttiiiioooonnnnssss!!
!!
Your connection is up and running and you should be able to browse the
Internet.
If you have any questions or run into any difficulty, contact your service provider’s customer
assistance center. If you are connected, answers to many frequently asked product-related
questions are also available on-line at: http://www.netopia.com/support
Configure Your Netopia Gateway
4 5 6
NNNNeeeettttooooppppiiiiaaaa PPPPaaaarrrrtttt NNNNuuuummmmbbbbeeeerrrr::
::
6180100-00-02
Copyright 2004, Netopia, Inc. Netopia and the Netopia logo are registered trademarks
belonging to Netopia, Inc., registered U.S. Patent and Trademark Office. Broadband Without
Boundaries is a trademark belonging to Netopia, Inc. All other trademarks are the property
of their respective owners. All rights reserved.
Loading...