Netgear RPS5412 Data Sheet [zh]

®
Model No. RPS5412
OPTIMAL POWER
Redundant Power Supply System for NETGEAR® RPS Capable Switches
Specifications
The Redundant Power that you can rely on
RPS Power Supply Series™ is a unique and a highly reliable power supply series. It is used as a redundant power supply for NETGEAR® RPS capable PoE, 10/100 Ethernet, and Gigabit Ethernet switches. The power supplies in this series are tested and verified by NETGEAR®.
The RPS Power Series™ is designed for Universal AC to DC power supply applications. Because of this feature these power supplies can be used anywhere in the world.
The Model RPS5412 is a 1U rack mountable RPS (Redundant power supply). The RPS has an ON/OFF switch, and an associating DC power LED.
Data Sheet
Electrical
Output Voltage –52V DC +12V DC Output Ripple Typical 200mV Typical 120mV Output Current Typical 5.77A max. Typical 9A max. Output Power* 300W 100W Input Voltage Universal 90VAC to 264VAC input Input Frequency 47Hz to 63Hz Input Current 5 Ampere maximum
Typical Safety Ratings for Internal Power Module
Designed in full compliance with
EMI EN55022 “Class A” EMS EN61000-4-2,-3,-4,-5,-6,-8,-11 Harmonics EN61000-3-2 Class D
Environmental
Overload Protection Auto-recovery Functional Temperature 0 to 70 °C Storage Temperature -20 to 85 °C Over voltage Type Latch off Efficiency 80-90% Typical RoHS YES Dimensions 1U (1.75” H x 19” W x 12.12” D) Weight Approx. 11.55 lb = 5239 g = 184.80 oz
UL60950 CSA 22.2 No. 234 EN60950
C
RoHS
2002/95/EC
www.optimal-power.com
Rev. A
Compatible NETGEAR® Switch Model Number Table
NETGEAR® Switch Model
GSM7224-200 RPS5412 RPSC5412 GSM7248-200 RPS5412 RPSC5412 GSM7228PS RPS5412* RPSC5412 GSM7252PS RPS5412* RPSC5412 GSM7328S-200 RPS5412 RPSC5412 GSM7352S-200 RPS5412 RPSC5412 GSM7328FS RPS5412 RPSC5412
* NOTE The Model RPS5412 only provides up to 300W for POE application. If POE
devices connected to the switch system need more than 300W, then this device is not recommended.
Optimal Power® RPS Models
RPSC5412
Optimal Power® DC Cable
Package Content
Redundant Power Supply Model RPS5412
DC Connection Cable Model RPSC5412
AC Connection Cord (see ordering chart)
Installation Manual
Rack-mount Screws
Ordering Information Chart
RPS Model Worldwide region
RPS5412-100NAS Americas RPS5412-100EUS Europe RPS5412-100AJS Asia
www.optimal-power.com
Rev. A
A
DO NOT OPERATE OR SERVICE THE RPS5412 MODEL WITHOUT READING THIS ENTIRE
DOCUMENT FIRST
Optimal Power Supplies LLC is not responsible for any kind of damages sustained through the use of this or any other Optimal Power Supplies LLC products. It is entirely the customer’s responsibility to take all the necessary precautionary measures when installing this unit.
In the interest of improving internal design, operational function, and/or reliability, Optimal Power Supplies LLC reserves the right to make changes to the products described in this document without notice.
WARRANTY
LIABILITY
1. Optimal Power
®
warrants its product models RPS5412 and RPSC5412 against defects in materials and workmanship for Three (3) year from date of delivery. We will repair, or replace parts which prove to be defective during the warranty period.
2. Any defect discovered after the warranty period has expired will be deemed to be outside the coverage of the warranty, as noted below:
“THIS EXPRESS WARRANTY SUPERSEDES AND IS IN LIEU OF ALL REMEDIES AND WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
ND LIABILITY FOR NEGLIGENCE. IN NO EVENT SHALL SELLER OR ITS DISTRIBUTORS BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL LOSSES, EXPENSES OR DAMAGES”.
®
3. Optimal Power
does not endorse any other warranty, expressed or implied, and is not liable for consequential damages. Products that are damaged, opened, or modified do not qualify for a warranty. The same procedures must be followed for repairs outside the warranty period.
www.optimal-power.com
Rev. A
Loading...