NETGEAR NeoTV Pro, NTV300S Getting Started

Getting Started

Technical Support

Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your

product and use it to register your product at https://my.netgear.com. You
must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web
site.

Phone (US only): 1-888-NETGEAR
Phone (Other Countries):
See http://support.netgear.com/app/answers/detail/a_id/984.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks
and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the
United States and/or other countries. Information is subject to change without
notice. Other brand and product names are registered trademarks or
trademarks of their respective holders. © 2012 NETGEAR, Inc. All rights
reserved.

HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Manufactured under license from Dolby laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi Corporation, and is
intended for home and other limited viewing uses only unless otherwise
authorized by Rovi Corporation. Reverse engineering or disassembly is
prohibited.

3

What’s in the Box

Power adapter

Remote

NeoTV Streaming Player

control

Installation guide

AAA batteries

(x2)

AV cable

4

Front and Rear Views

What You Need to Use Your NeoTV Player

• TV with HDMI port

• HDMI cable

• Broadband Internet connection

• A wireless or wired network

• Device with Internet browser for service activation

5

Connect to the TV

1. Make sure that your TV is on and set to display the correct video

input.

2. Connect an HDMI cable (sold separately) to the HDMI port on your

player and to the HDMI IN port on your TV. Alternatively, if your TV
does not have an HDMI port, you can connect using the AV
composite cable. When the HDMI cable is connected, there will be
no output to the AV composite port.

3. Connect the power adapter to your player, and plug it into an

electrical outlet.

HDMI supports 5.1 surround
sound (if available). You do not
need a separate audio cable.

(optional)