Netgear FS728TP Quick Start Manual
FS728TP
Hardware Installation Guide
350 East Plumeria Drive
San Jose, CA 95134
USA
October 2010
202-10682-02
v1.0
FS728TP Hardware Installation Guide
©2010 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online,
visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): See Support information card.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Auto Uplink, X-RAID2, and NeoTV are trademarks or
registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are registered trademarks
of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their
respective holders.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Revision History
Publication Part Number Version Publish Date Comments
202-10682-02 v1.0 October 2010
2 |
Table of Contents
Chapter 1 Introduction
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PoE Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Green Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 2 Physical Description
FS728TP Front-Panel and Back-Panel Configuration. . . . . . . . . . . . . . . . 10
LED Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
System LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Device Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RJ-45 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Factory Defaults Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 3 Applications
Desktop Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 4 Installation
Step 1: Preparing the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Step 2: Installing the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installing the Switch on a Flat Surface. . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installing the Switch in a Rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Step 3: Checking the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Step 4: Connecting Devices to the Switch. . . . . . . . . . . . . . . . . . . . . . . . . 21
Step 5: Applying AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Step 6: Managing the Switch using a Web Browser or the PC Utility . . . . 23
Appendix A Troubleshooting
Troubleshooting Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Additional Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Network Adapter Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Switch Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Table of Contents | 3
Auto-Negotiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Appendix B Technical Specifications
Appendix C Notification of Compliance
Index
FS728TP Hardware Installation Guide
4 | Table of Contents
1. Introduction
Congratulations on the purchase of your NETGEAR FS728TP Smart PoE Switch. The
FS728TP is a supplement to the Gigabit Advanced Smart Switch family. The FS728TP is a
PoE-supportable, 24-port Fast Ethernet Smart Switch with 24 PoE ports with 2 combo ports
and 2 Gigabit copper uplinks .
This chapter serves as an introduction to the FS728TP and provides the following
information:
• Overview
• Features
• Package Contents
1
Chapter 1: Introduction | 5
FS728TP Hardware Installation Guide
Overview
This Installation Guide is for the NETGEAR FS728TP Smart PoE Switch. This product is a
24-port Fast Ethernet Smart Switch with 24 PoE ports with 2 combo ports and 2 Gigabit
copper uplinks.
Using Gigabit ports, high-speed connections can be made to a server or network backbone.
For example:
• Linking to high-speed servers
• Providing 10/100/1000 Mbps copper connectivity
The FS728TP also provides the benefit of administrative management with a complete
package of features for the observation, configuration, and control of the network. With a
Web-based Graphical User Interface (GUI), the switch’s many capabilities can be viewed and
used in a simple and intuitive manner. The switch’s management features include
configuration for port and switch information, VLAN for traffic control, port trunking for
increased bandwidth, and Class of Service (CoS) for traffic prioritization. These features
provide better understanding and control of the network. Initial discovery of the switch on the
network requires the Netgear Smart Control Center program, a utility that runs on a PC.
The FS728TP is a free-standing switch. It is IEEE-compliant and offers low latency for
high-speed networking. All ports can automatically negotiate to the highest speed. This
capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet,
or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex
mode. The maximum segment length is 328 feet (100 meters) over Category 5 Unshielded
Twisted-Pair (UTP) cable.
6 | Chapter 1: Introduction
FS728TP Hardware Installation Guide
Features
The following list identifies the key features of the FS728TP:
• 24-port Fast Ethernet Smart Switch with 24 PoE ports with 2 combo ports and 2 Gigabit
copper uplinks.
• Four 10/100/1000 Gigabit Ethernet switching ports.
• Two 1000M SFP Gigabit Ethernet switching ports.
• Full NETGEAR Smart Switch functionality.
• Full compatibility with IEEE standards:
• IEEE 802.3 CSMA/CD
• IEEE 802.3i (10BASE-T)
• IEEE 802.3u (100BASE-TX)
• IEEE 802.3x (Full-duplex flow control)
• IEEE 802.3ab (1000BASE-T)
• IEEE 802.3z (1000BASE-x)
• IEEE 802.3af (DTE power via MDI)
• Autosensing and auto-negotiating capabilities for all ports.
• Auto Uplink™ on all ports to make the right connection.
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
• Store-and-Forward transmission to remove bad packets from the network.
• Full-duplex IEEE 802.3x pause frame flow control.
• Active flow control to minimize packet loss and frame drops.
• Half-duplex backpressure control.
• Per port LEDs, power LED, PoE Max, and fan.
• Standard NETGEAR 7xx series chassis.
• NETGEAR Green product features.
PoE Features
The FS728TP supports IEEE 802.3af PSE features:
• Ports 1 through 24 support IEEE 802.3af, Alternative A (MDI-X). The total PoE power
budget is 192 Watts, with a maximum of 15.4 Watts per PoE port.
• PoE is enabled by default.
Chapter 1: Introduction | 7
FS728TP Hardware Installation Guide
Green Features
The FS728TP supports the following power-saving features:
• The power consumption automatically adjusts based on the RJ-45 cable length.
• Each port is configured to power down automatically when the port link is down.
Package Contents
Figure 1 shows the package contents of the NETGEAR FS728TP Smart PoE Switch.
Figure 1. Package Contents
Verify that the package contains the following:
• NETGEAR FS728TP Smart PoE Switch
• Rubber footpads for tabletop installation
• Rackmounting kits
• Power cord
• Installation guide
• Smart Switch Resource CD with Netgear Smart Control Center and User’s Manual
If any item is missing or damaged, contact the place of purchase immediately.
8 | Chapter 1: Introduction
2. Physical Description
This chapter describes the NETGEAR FS728TP Smart PoE Switch hardware features.
Topics include:
• FS728TP Front-Panel and Back-Panel Configuration
• LED Designations
• Device Hardware Interfaces
2
Chapter 2: Physical Description | 9
FS728TP Hardware Installation Guide
FS728TP Front-Panel and Back-Panel Configuration
The FS728TP has 24 10/100 Mbps autosensing, four 10/100/1000 Mbps Gigabit Ethernet
switching ports, and two 1000 Mbps SFP Gigabit Ethernet switching ports. Each RJ-45 port is
capable of sensing the line speed and negotiating the duplex mode with the link partner
automatically.
Figure 2 illustrates the front panel of the NETGEAR FS728TP.
Link/Speed/ACT LEDs
Power/Status LED
Figure 2. Front Panel
PoE Status LEDs
10/100 Mbps Ethernet Ports
1000M SFP Ports
10/100/1000 Ethernet Ports
The front panel contains the following:
• 24 RJ-45 connectors for 10/100 Mbps autosensing Fast Ethernet switching ports
• Four 10/100/1000 Gigabit Ethernet switching ports
• Two 1000 Mbps SFP Gigabit Ethernet switching ports
• Reset button to restart the device
• Recessed default reset button to restore the device back to the factory defaults
• Link, Speed, and Activity LEDs for each port
• Power and Status LED
• PoE Max LED
• Fan LED
Figure 3 illustrates the NETGEAR FS728TP back panel.
Figure 3. Back Panel
The back panel contains the following:
• A power connector
10 | Chapter 2: Physical Description
Power Connector
FS728TP Hardware Installation Guide
LED Designations
Port LEDs
The following table describes the RJ-45 and SFP port LED designations. There are two LEDs
for each RJ-45 port.
LED Designation
Each SFP port has its own indication LED.
Link/Speed/ACT LED mode for
port 1 to 24:
PoE LED mode for port 1 to 24: • Per port:
Port Speed/Link/ACT LED for SFP
ports (port 25 to 26):
• Per port:
- Solid Green — A valid 100 Mbps link is established.
- Blinking Green — Packets transmitting/ receiving is occurring at
100 Mbps.
- Blinking Yellow — A valid 10 Mbps link is established.
- Flashing Yellow — No link is established.
- Off — No PoE powered device (PD) is connected.
- Solid Green — The PoE powered device (PD) is connected and
the port is supplying power.
- Solid Yellow — Indicates one of the following failures caused the
device not delivering power to that port:
• Indicates one of the following failures caused the device not
delivering power to that port:
• PD power demand exceeds the available power
• PoE current exceeds PD's classification
• Out of proper voltage band (44 VDC–57 VDC for IEEE 802.3af)
• Off — No link
• Solid Green — A valid 1000 Mbps link is established.
• Blinking Green — Packets transmitting/receiving is occurring at
1000 Mbps.
• Solid Yellow — A valid 100 Mbps link is established.
• Blinking Yellow — Packets transmitting/receiving is occurring at
100 Mbps.
RJ-45 jacks with LEDs for the four
10/100/1000 copper ports (port 25
to 28):
• Right LED (Link/ACT LED):
- Off — No link is established
- Solid Green — A valid link is established.
- Blinking Green — Packets transmitting/receiving is occurring.
• Left LED (Speed LED):
- Off — Either 10 Mbps link is established or no link established.
- Solid Green — A valid 1000 Mbps link is established.
- Blinking Green — A valid 100 Mbps link is established.
Chapter 2: Physical Description | 11
Loading...