Netgear FS116P Installation Guide

3. Install the switch and connect the other devices.
2. Prepare to install the switch.
1. Unpack the box and verify the contents. Estimated Time: 5-10 minutes
Installation Overview
need to install separate electrical wiring and power outlets in new or hard to reach places.
brouillage radioélectrique du mimisére des Communications du Canada. les limites de bruits radioélectriques visant les appareils numériques de class A rpescrites dans le Reglement sur le Cet appareil numérique (NETGEAR Model FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE) respecte
Règlement sur le brouillage radioélectrique du ministère des Communications
o f the Canadian Department of Communications. exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations This digital apparatus (NETGEAR Model FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE) does not
Canadian Department of Communications Radio Interference Regulations
widely adopted in the market, saving up to 50% of overall installation costs by eliminating the Products that are powered by PoE are generically called Powered Devices (PD). PoE is already IP telephones, wireless LAN access points and IP cameras, for a distance up to 100 Meters. Using category 5/5e cable or better, PoE will provide power to PoE compatible devices, such as The FS116P complies with the IEEE 802.3af standard. standard defines how products should provide and receive power over the data infrastructure. eliminating the need to have AC power adapters available at all locations. The IEEE 802.3af Power over Ethernet (PoE) integrates power and data onto one single cabling infrastructure,
Power over Ethernet (PoE)
Model FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE
P
6
1
1
FS
L
E
D
O
M
h
c
t
i
w
t S
e
rn
e
h
t
E
st
a
F
4a. Conformity is declared by the application of EN35 022 Class A (CISPR 22). against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article This is to certify that the NETGEAR Model FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE is shielded
EN 55 022 Declaration of Conformance
• Consult the dealer or an experienced radio/TV technician for help.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Reorient or relocate the receiving antenna. to correct the interference by one or more of the following measures:
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to used in accordance with the instructions, may cause harmful interferences to radio communications. However, there is no residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences in a Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
• This device must accept any interference received, including interference that may cause undesired operation.
• This device may not cause harmful interference. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
Notice Federal Communications Commission (FCC) Compliance Notice: Radio Frequency
numbers). (support@NETGEAR.com) and by phone (see the provided support information card for phone a day and 7days a week on the Web (www.NETGEAR.com ), by e-mail each appliance. If you have a problem with your switch, NETGEAR offers free support 24 hours will automatically detect the device's power requirements, and will supply the required power to drive WLAN access points, IP phones, IP cameras and other PoE-capable devices. The switch devices. The switch will provide up to 15.4 W of power on each PoE port and can be used to standards-based PoE, and will automatically detect the presence of IEEE 802.3af-compliant FS116P provides 16 ports of standard networking. Ports 1 through 8 of this Switch can provide both 100Mbps Fast Ethernet and 10Mbps Ethernet capabilities in a sturdy, compact package, the This switch provides Power over Ethernet (PoE) capabilities in a small form factor. Integrating Congratulations on your purchase of the NETGEAR® ProSafe 16 Port Switch with 8 Port PoE.
Introduction
があります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。 この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすこと
Voluntary Control Council for Interference (VCCI) Statement
series for compliance with the regulations.
Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The
It is hereby certified that the NETGEAR Model FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE has
Certificate of the Manufacturer/Importer
occur due to the use or application of the product(s) or circuit layout(s) described here in. changes to the product described in this document without notice. NETGEAR does not assume any liability that may In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make
Statement of Conditions
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support
See Support Information card for other countries.
E-mail: support@NETGEAR.com (24 x 7 online support)
www.NETGEAR.com
ProSafe 16 Port Switch with 8 Port PoE
10/100 Mbps FS116P
© 2005 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, ProSafe, Auto Uplink and Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved
July 2005
201-10536-01
Installation Guide
Loading...