NetCommWireless
QUICK START GUIDE
NetComm
Wireless
NF7
N300 WiFi Gigabit Router
NetComm
Wireless
THANKS FOR PURCHASING NETCOMM WIRELESS
This quick start guide is designed to get you up and running quickly with your new router. More
advanced set up instructions can be found in the user manual which can be downloaded from
www.netcommwireless.com
SET UP YOUR ROUTER
1. Take the supplied power adapter and attach it to the Power socket on the rear of the
router and connect the other end of it to a wall plug power source.
WPS/
RESET
ON/OFF
2. Attach the Ethernet cable provided to the blue WAN port on the back of the router.
Attach the other end to your xed line modem.
WPS/
RESET
ON/OFF
CONNECTING VIA AN ETHERNET CABLE
1. Connect an Ethernet cable to one of the yellow LAN ports on the back of the
NF7 router.
WPS/
RESET
ON/OFF
2. Connect the other end of the Ethernet cable to your computer.
NOTE: There is only one Ethernet cable supplied. If you require more than one Ethernet cable, any standard Ethernet cable is suitable.
Loading...